main
Ray Publish 0.1.0 5257744

PIC24FJ128GA306T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)

PIC24FJ128GA306T-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE5 bidirectional PORTE digital I/O with Schmitt Trigger input whose input tolerance is limited to VDD (not 5.5 V); also PMP data PMD5, LCD bias input LCDBIAS2 and CTMU edge input CTED4.
2 RE6 bidirectional PORTE digital I/O with Schmitt Trigger input whose input tolerance is limited to VDD (not 5.5 V); also PMP data PMD6 and LCD bias input LCDBIAS1.
3 RE7 bidirectional PORTE digital I/O with Schmitt Trigger input whose input tolerance is limited to VDD (not 5.5 V); also PMP data PMD7 and LCD charge pump bias input LCDBIAS0.
4 RG6 bidirectional PORTG digital I/O with Schmitt Trigger input (5.5 V tolerant); also comparator 1 input D, remappable peripheral RP21 and PMP address PMA5.
5 RG7 bidirectional PORTG digital I/O with Schmitt Trigger input (5.5 V tolerant); also LCD charge pump capacitor input VLCAP1 and comparator 1 input C.
6 RG8 bidirectional PORTG digital I/O with Schmitt Trigger input (5.5 V tolerant); also LCD charge pump capacitor input VLCAP2 and comparator 2 input D.
7 MCLR input Master Clear (device Reset) input with Schmitt Trigger; brought low to cause a Reset.
8 RG9 bidirectional PORTG digital I/O with Schmitt Trigger input (5.5 V tolerant); also LCD segment output SEG1 and comparator 2 input C.
9 VSS power_in Ground reference for logic and I/O pins.
10 VDD power_in Positive supply for peripheral digital logic and I/O pins; operating range 2.0 V to 3.6 V.
11 RB5 bidirectional PORTB digital I/O with Schmitt Trigger input (5.5 V tolerant); also ICSP/debug clock PGEC3, analog input AN5, comparator 1 input A and LCD segment SEG2.
12 RB4 bidirectional PORTB digital I/O with Schmitt Trigger input (5.5 V tolerant); also ICSP/debug data PGED3, analog input AN4, comparator 1 input B and LCD segment SEG3.
13 RB3 bidirectional PORTB digital I/O with Schmitt Trigger input (5.5 V tolerant); also analog input AN3, comparator 2 input A and LCD segment SEG4.
14 RB2 bidirectional PORTB digital I/O with Schmitt Trigger input (5.5 V tolerant); also analog input AN2, comparator 2 input B, CTMU comparator input CTCMP and LCD segment SEG5.
15 RB1 bidirectional PORTB digital I/O with Schmitt Trigger input whose input tolerance is limited to VDD (not 5.5 V); also ICSP/debug clock PGEC1, comparator/ADC reference input CVREF- and analog input AN1.
16 RB0 bidirectional PORTB digital I/O with Schmitt Trigger input whose input tolerance is limited to VDD (not 5.5 V); also ICSP/debug data PGED1, comparator/ADC reference input CVREF+ and analog input AN0.
17 RB6 bidirectional PORTB digital I/O with Schmitt Trigger input whose input tolerance is limited to VDD (not 5.5 V); also ICSP/debug clock PGEC2, analog input AN6 and LCD bias input LCDBIAS3.
18 RB7 bidirectional PORTB digital I/O with Schmitt Trigger input (5.5 V tolerant); also ICSP/debug data PGED2 and analog input AN7.
19 AVDD power_in Positive supply for analog modules; must be connected regardless of whether analog modules are used.
20 AVSS power_in Ground reference for analog modules; must be connected regardless of whether analog modules are used.
21 RB8 bidirectional PORTB digital I/O with Schmitt Trigger input (5.5 V tolerant); also analog input AN8, LCD common output COM7 and LCD segment SEG31.
22 RB9 bidirectional PORTB digital I/O with Schmitt Trigger input (5.5 V tolerant); also analog input AN9, LCD common output COM6 and LCD segment SEG30.
23 RB10 bidirectional PORTB digital I/O with Schmitt Trigger input (5.5 V tolerant); also JTAG test mode select TMS, comparator voltage reference output CVREF, analog input AN10 and LCD common output COM5.
24 RB11 bidirectional PORTB digital I/O with Schmitt Trigger input (5.5 V tolerant); also JTAG test data output TDO and analog input AN11.
25 VSS power_in Ground reference for logic and I/O pins.
26 VDD power_in Positive supply for peripheral digital logic and I/O pins; operating range 2.0 V to 3.6 V.
27 RB12 bidirectional PORTB digital I/O with Schmitt Trigger input (5.5 V tolerant); also JTAG test clock/programming clock input TCK and analog input AN12.
28 RB13 bidirectional PORTB digital I/O with Schmitt Trigger input (5.5 V tolerant); also JTAG test data/programming data input TDI and analog input AN13.
29 RB14 bidirectional PORTB digital I/O with Schmitt Trigger input (5.5 V tolerant); also analog input AN14, remappable peripheral RP14 and CTMU pulse output CTPLS.
30 RB15 bidirectional PORTB digital I/O with Schmitt Trigger input (5.5 V tolerant); also analog input AN15, remappable peripheral RP29 and reference clock output REFO.
31 RF4 bidirectional PORTF digital I/O with Schmitt Trigger input (5.5 V tolerant); also I2C2 data SDA2 and remappable peripheral RP10.
32 RF5 bidirectional PORTF digital I/O with Schmitt Trigger input (5.5 V tolerant); also I2C2 clock SCL2 and remappable peripheral RP17.
33 RF3 bidirectional PORTF digital I/O with Schmitt Trigger input (5.5 V tolerant); also remappable peripheral RP16 and LCD segment SEG12.
34 RF2 bidirectional PORTF digital I/O with Schmitt Trigger input (5.5 V tolerant); also remappable peripheral RP30.
35 RF6 bidirectional PORTF digital I/O with Schmitt Trigger input (5.5 V tolerant); also external interrupt input INT0.
36 RG3 bidirectional PORTG digital I/O with Schmitt Trigger input (5.5 V tolerant); also I2C1 data SDA1 and LCD segment SEG47.
37 RG2 bidirectional PORTG digital I/O with Schmitt Trigger input (5.5 V tolerant); also I2C1 clock SCL1 and LCD segment SEG28.
38 VDD power_in Positive supply for peripheral digital logic and I/O pins; operating range 2.0 V to 3.6 V.
39 OSCI input Main oscillator input connection (also external clock input CLKI) with analog input buffer; port pin RC12 shares this pin.
40 OSCO/CLKO/RC15 output Main oscillator output connection; also system clock output CLKO (FOSC/2) when OSCIOFCN configures it, otherwise port pin RC15.
41 VSS power_in Ground reference for logic and I/O pins.
42 RD8 bidirectional PORTD digital I/O with Schmitt Trigger input (5.5 V tolerant); also RTCC alarm/seconds pulse output RTCC, remappable peripheral RP2 and LCD segment SEG13.
43 RD9 bidirectional PORTD digital I/O with Schmitt Trigger input (5.5 V tolerant); also remappable peripheral RP4, PMP acknowledge input PMACK2 and LCD segment SEG14.
44 RD10 bidirectional PORTD digital I/O with Schmitt Trigger input (5.5 V tolerant); also remappable peripheral RP3, PMP address PMA15 / chip select 2 CS2 and comparator 3 input D.
45 RD11 bidirectional PORTD digital I/O with Schmitt Trigger input (5.5 V tolerant); also remappable peripheral RP12, PMP address PMA14 / chip select 1 CS1 and comparator 3 input C.
46 RD0 bidirectional PORTD digital I/O with Schmitt Trigger input (5.5 V tolerant); also remappable peripheral RP11 and LCD segment SEG17.
47 SOSCI input Input-only port pin RC13 (cannot be configured as output) that also serves as secondary oscillator/Timer1 clock input SOSCI; input tolerance limited to VDD.
48 SOSCO input Input-only port pin RC14 (cannot be configured as output) that also serves as digital secondary clock input SCLKI and remappable input RPI37; input tolerance limited to VDD.
49 RD1 bidirectional PORTD digital I/O with Schmitt Trigger input (5.5 V tolerant); also remappable peripheral RP24 and LCD segment SEG20.
50 RD2 bidirectional PORTD digital I/O with Schmitt Trigger input (5.5 V tolerant); also remappable peripheral RP23, PMP acknowledge input PMACK1 and LCD segment SEG21.
51 RD3 bidirectional PORTD digital I/O with Schmitt Trigger input (5.5 V tolerant); also remappable peripheral RP22, PMP byte enable PMBE0 and LCD segment SEG22.
52 RD4 bidirectional PORTD digital I/O with Schmitt Trigger input (5.5 V tolerant); also remappable peripheral RP25, PMP write strobe PMWR and LCD segment SEG23.
53 RD5 bidirectional PORTD digital I/O with Schmitt Trigger input (5.5 V tolerant); also remappable peripheral RP20, PMP read strobe PMRD and LCD segment SEG24.
54 RD6 bidirectional PORTD digital I/O with Schmitt Trigger input whose input tolerance is limited to VDD (not 5.5 V); also comparator 3 input B and LCD segment SEG25.
55 RD7 bidirectional PORTD digital I/O with Schmitt Trigger input whose input tolerance is limited to VDD (not 5.5 V); also comparator 3 input A and LCD segment SEG26.
56 VCAP passive External filter capacitor connection for the on-chip voltage regulator (regulator enabled); a low-ESR 10 µF capacitor to ground is required and VCAP must not be connected to VDD.
57 VBAT power_in Backup battery connection for VBAT mode (operating voltage 1.6 V to 3.6 V).
58 RF0 bidirectional PORTF digital I/O with Schmitt Trigger input (5.5 V tolerant); also LCD segment output SEG27.
59 RF1 bidirectional PORTF digital I/O with Schmitt Trigger input (5.5 V tolerant); also LCD common output COM4 and LCD segment SEG48.
60 RE0 bidirectional PORTE digital I/O with Schmitt Trigger input (5.5 V tolerant); also LCD common output COM3 and PMP data PMD0.
61 RE1 bidirectional PORTE digital I/O with Schmitt Trigger input (5.5 V tolerant); also LCD common output COM2 and PMP data PMD1.
62 RE2 bidirectional PORTE digital I/O with Schmitt Trigger input (5.5 V tolerant); also LCD common output COM1 and PMP data PMD2.
63 RE3 bidirectional PORTE digital I/O with Schmitt Trigger input (5.5 V tolerant); also LCD common output COM0, CTMU edge input CTED9 and PMP data PMD3.
64 RE4 bidirectional PORTE digital I/O with Schmitt Trigger input (5.5 V tolerant); also high/low-voltage detect input HLVDIN, CTMU edge input CTED8 and PMP data PMD4.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-64(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 100 °C 359
Storage temperature -65 150 °C 359
Voltage on VDD with respect to VSS VDD -0.3 4 V 359
Voltage on any combined analog and digital pin, and MCLR, with respect to VSS (printed max VDD + 0.3V) -0.3 V 359
Voltage on any digital only pin with respect to VSS (printed max VDD + 0.3V) -0.3 V VDD < 3.0V 359
Voltage on any digital only pin with respect to VSS -0.3 5.5 V VDD > 3.0V 359
Operating Junction Temperature Range TJ -40 125 °C PIC24FJ128GA310 family 360
Operating Ambient Temperature Range TA -40 85 °C Industrial 360
Operating voltage range (VDD) VDD 2 3.6 V 2
Idle Current (IIDLE), DC47 IIDLE 1 1.35 mA -40°C to +85°C, 2.0V, 16 MIPS, FOSC = 32 MHz 362
Idle Current (IIDLE), DC47 IIDLE 1.07 1.4 mA -40°C to +85°C, 3.3V, 16 MIPS, FOSC = 32 MHz 362
Idle Current (IIDLE), DC51 IIDLE 21 76 µA -40°C to +85°C, 2.0V, LPRC (15.5 KIPS), FOSC = 31 kHz 362
Idle Current (IIDLE), DC51 IIDLE 21 78 µA -40°C to +85°C, 3.3V, LPRC (15.5 KIPS), FOSC = 31 kHz 362
Package thermal resistance, junction to ambient, 10x10x1 mm 64-pin TQFP θJA 48.3 °C/W Note 1: junction-to-ambient, from package simulations 360

CAD (KiCad official)

  • Symbol: PIC24FJ128GA306T-I
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic24fj128ga306t-i-pt-etched.step / pic24fj128ga306t-i-pt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic24fj128ga306t-i-pt.step / pic24fj128ga306t-i-pt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (420 pp, sha256 48bc4684bcaf450d, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF