3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC24FJ128GA306-I/PT
Microchip Tech · MICROCHIP · TQFP-64(10x10)
PIC24FJ128GA306-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CTED4/PMD5/LCDBIAS2/CN63/RE5 | bidirectional | PORTE digital I/O with Schmitt Trigger input, also usable as LCD driver charge pump bias input (LCDBIAS2) and CTMU external edge input. |
| 2 | PMD6/LCDBIAS1/CN64/RE6 | bidirectional | PORTE digital I/O with Schmitt Trigger input, also usable as LCD driver charge pump bias input (LCDBIAS1) and EPMP data bit. |
| 3 | PMD7/LCDBIAS0/CN65/RE7 | bidirectional | PORTE digital I/O with Schmitt Trigger input, also usable as LCD driver charge pump bias input (LCDBIAS0) and EPMP data bit. |
| 4 | AN17/C1IND/RP21/SEG0/PMA5/CN8/RG6 | bidirectional | PORTG digital I/O with Schmitt Trigger input, also remappable peripheral pin (RP21), comparator 1 input D and LCD segment output SEG0. |
| 5 | VLCAP1/C1INC/RP26/PMA4/CN9/RG7 | bidirectional | PORTG digital I/O with Schmitt Trigger input, also LCD drive charge pump capacitor input VLCAP1 and comparator 1 input C. |
| 6 | VLCAP2/C2IND/RP19/PMA3/CN10/RG8 | bidirectional | PORTG digital I/O with Schmitt Trigger input, also LCD drive charge pump capacitor input VLCAP2 and comparator 2 input D. |
| 7 | MCLR | input | Master Clear (device Reset) input; the line is brought low to cause a Reset. |
| 8 | C2INC/RP27/SEG1/PMA2/CN11/RG9 | bidirectional | PORTG digital I/O with Schmitt Trigger input, also comparator 2 input C and remappable peripheral pin (RP27). |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 11 | PGEC3/AN5/C1INA/RP18/SEG2/CN7/RB5 | bidirectional | PORTB digital I/O with Schmitt Trigger input, also ICSP programming clock 3 and analog input AN5 (ANA level). |
| 12 | PGED3/AN4/C1INB/RP28/SEG3/CN6/RB4 | bidirectional | PORTB digital I/O with Schmitt Trigger input, also ICSP programming data 3 and analog input AN4. |
| 13 | AN3/C2INA/SEG4/CN5/RB3 | bidirectional | PORTB digital I/O with Schmitt Trigger input, also analog input AN3 and comparator 2 input A. |
| 14 | AN2/C2INB/RP13/SEG5/CTCMP/CTED13/CN4/RB2 | bidirectional | PORTB digital I/O with Schmitt Trigger input, also analog input AN2 and CTMU comparator 2 input (pulse mode). |
| 15 | PGEC1/CVREF-/AN1/RP1/SEG6/CTED12/CN3/RB1 | bidirectional | PORTB digital I/O with Schmitt Trigger input, also ICSP programming clock 1 and comparator/ADC reference voltage (low) input CVREF-. |
| 16 | PGED1/CVREF+/AN0/RP0/SEG7/CN2/RB0 | bidirectional | PORTB digital I/O with Schmitt Trigger input, also ICSP programming data 1 and comparator/ADC reference voltage (high) input CVREF+. |
| 17 | PGEC2/AN6/RP6/LCDBIAS3/CN24/RB6 | bidirectional | PORTB digital I/O with Schmitt Trigger input, also ICSP programming clock 2 and LCD bias input LCDBIAS3. |
| 18 | PGED2/AN7/RP7/CN25/RB7 | bidirectional | PORTB digital I/O with Schmitt Trigger input, also ICSP programming data 2 and analog input AN7. |
| 19 | AVDD | power_in | Positive supply for analog modules. |
| 20 | AVSS | power_in | Ground reference for analog modules. |
| 21 | AN8/RP8/SEG31/COM7/CN26/RB8 | bidirectional | PORTB digital I/O with Schmitt Trigger input, also analog input AN8 and LCD common output COM7. |
| 22 | AN9/RP9/SEG30/COM6/CN27/RB9 | bidirectional | PORTB digital I/O with Schmitt Trigger input, also analog input AN9 and LCD common output COM6. |
| 23 | TMS/CVREF/AN10/SEG29/COM5/PMA13/CN28/RB10 | bidirectional | PORTB digital I/O with Schmitt Trigger input, also JTAG test mode select input TMS, analog input AN10 and comparator voltage reference output CVREF. |
| 24 | TDO/AN11/PMA12/CN29/RB11 | bidirectional | PORTB digital I/O with Schmitt Trigger input, also JTAG test data output TDO and analog input AN11. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 27 | TCK/AN12/SEG18/CTED2/PMA11/CN30/RB12 | bidirectional | PORTB digital I/O with Schmitt Trigger input, also JTAG test clock TCK and analog input AN12. |
| 28 | TDI/AN13/SEG19/CTED1/PMA10/CN31/RB13 | bidirectional | PORTB digital I/O with Schmitt Trigger input, also JTAG test data input TDI and analog input AN13. |
| 29 | AN14/RP14/SEG8/CTPLS/CTED5/PMA1/CN32/RB14 | bidirectional | PORTB digital I/O with Schmitt Trigger input, also analog input AN14 and CTMU pulse output CTPLS. |
| 30 | AN15/RP29/SEG9/REFO/CTED6/PMA0/CN12/RB15 | bidirectional | PORTB digital I/O with Schmitt Trigger input, also analog input AN15 and reference clock output REFO. |
| 31 | SDA2/RP10/SEG10/PMA9/CN17/RF4 | bidirectional | PORTF digital I/O with Schmitt Trigger input, also I2C2 data input/output SDA2. |
| 32 | SCL2/RP17/SEG11/PMA8/CN18/RF5 | bidirectional | PORTF digital I/O with Schmitt Trigger input, also I2C2 synchronous serial clock input/output SCL2. |
| 33 | RP16/SEG12/CN71/RF3 | bidirectional | PORTF digital I/O with Schmitt Trigger input and remappable peripheral pin RP16. |
| 34 | RP30/SEG40/CN70/RF2 | bidirectional | PORTF digital I/O with Schmitt Trigger input and remappable peripheral pin RP30. |
| 35 | INT0/CN84/RF6 | bidirectional | PORTF digital I/O with Schmitt Trigger input, also external interrupt input INT0. |
| 36 | SDA1/SEG47/CN73/RG3 | bidirectional | PORTG digital I/O with Schmitt Trigger input, also I2C1 data input/output SDA1. |
| 37 | SCL1/SEG28/CN72/RG2 | bidirectional | PORTG digital I/O with Schmitt Trigger input, also I2C1 synchronous serial clock input/output SCL1. |
| 38 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 39 | OSCI/CLKI/CN23/RC12 | bidirectional | Main oscillator input connection (CLKI) that is also PORTC digital I/O with Schmitt Trigger input. |
| 40 | OSCO/CLKO/CN22/RC15 | bidirectional | Main oscillator output connection that can also provide system clock output CLKO or PORTC digital I/O. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RP2/SEG13/RTCC/CN53/RD8 | bidirectional | PORTD digital I/O with Schmitt Trigger input, also remappable peripheral pin RP2 and RTCC alarm/seconds pulse output. |
| 43 | RP4/SEG14/PMACK2/CN54/RD9 | bidirectional | PORTD digital I/O with Schmitt Trigger input, also remappable peripheral pin RP4 and EPMP acknowledgment input PMACK2. |
| 44 | RP3/SEG15/C3IND/PMA15/CS2/CN55/RD10 | bidirectional | PORTD digital I/O with Schmitt Trigger input, also remappable peripheral pin RP3 and parallel master port chip select 2 strobe CS2. |
| 45 | RP12/SEG16/C3INC/PMA14/CS1/CN56/RD11 | bidirectional | PORTD digital I/O with Schmitt Trigger input, also remappable peripheral pin RP12 and parallel master port chip select 1 strobe CS1. |
| 46 | RP11/SEG17/CN49/RD0 | bidirectional | PORTD digital I/O with Schmitt Trigger input and remappable peripheral pin RP11. |
| 47 | SOSCI/RC13 | input | Secondary oscillator/Timer1 clock input; RC13 is input-only Schmitt Trigger port pin. |
| 48 | RPI37/SOSCO/SCLKI/RC14 | input | Secondary oscillator output (SOSCO), digital secondary clock input SCLKI, and input-only port pin RC14. |
| 49 | RP24/SEG20/CN50/RD1 | bidirectional | PORTD digital I/O with Schmitt Trigger input and remappable peripheral pin RP24. |
| 50 | RP23/SEG21/PMACK1/CN51/RD2 | bidirectional | PORTD digital I/O with Schmitt Trigger input, also remappable peripheral pin RP23 and EPMP acknowledgment input PMACK1. |
| 51 | RP22/SEG22/PMBE0/CN52/RD3 | bidirectional | PORTD digital I/O with Schmitt Trigger input, also remappable peripheral pin RP22 and EPMP byte enable strobe PMBE0. |
| 52 | RP25/SEG23/PMWR/CN13/RD4 | bidirectional | PORTD digital I/O with Schmitt Trigger input, also remappable peripheral pin RP25 and parallel master port write strobe PMWR. |
| 53 | RP20/SEG24/PMRD/CN14/RD5 | bidirectional | PORTD digital I/O with Schmitt Trigger input, also remappable peripheral pin RP20 and parallel master port read strobe PMRD. |
| 54 | C3INB/SEG25/CN15/RD6 | bidirectional | PORTD digital I/O with Schmitt Trigger input and comparator 3 input B. |
| 55 | C3INA/SEG26/CN16/RD7 | bidirectional | PORTD digital I/O with Schmitt Trigger input and comparator 3 input A. |
| 56 | VCAP | passive | External filter capacitor connection for the on-chip voltage regulator (regulator enabled); a 10 µF capacitor to ground is required. |
| 57 | VBAT | power_in | Backup battery supply input; operating voltage is 1.6 V to 3.6 V when a battery is connected to VBAT. |
| 58 | SEG27/PMD11/CN68/RF0 | bidirectional | PORTF digital I/O with Schmitt Trigger input, also LCD segment output SEG27 and EPMP data bit. |
| 59 | COM4/SEG48/PMD10/CN69/RF1 | bidirectional | PORTF digital I/O with Schmitt Trigger input, also LCD common output COM4. |
| 60 | COM3/PMD0/CN58/RE0 | bidirectional | PORTE digital I/O with Schmitt Trigger input, also LCD common output COM3. |
| 61 | COM2/PMD1/CN59/RE1 | bidirectional | PORTE digital I/O with Schmitt Trigger input, also LCD common output COM2. |
| 62 | COM1/PMD2/CN60/RE2 | bidirectional | PORTE digital I/O with Schmitt Trigger input, also LCD common output COM1. |
| 63 | COM0/PMD3/CTED9/CN61/RE3 | bidirectional | PORTE digital I/O with Schmitt Trigger input, also LCD common output COM0 and CTMU external edge input. |
| 64 | PMD4/HLVDIN/CTED8/CN62/RE4 | bidirectional | PORTE digital I/O with Schmitt Trigger input, also high/low-voltage detect input HLVDIN. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 100 | °C | 359 | |||
| Storage temperature | -65 | 150 | °C | 359 | |||
| Voltage on VDD with respect to VSS | -0.3 | 4 | V | 359 | |||
| Voltage on any digital only pin with respect to VSS | -0.3 | 5.5 | V | when VDD > 3.0V | 359 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 360 | ||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | 360 | ||
| Package Thermal Resistance, junction to ambient, 64-pin TQFP | JA | 48.3 | °C/W | 10x10x1 mm 64-pin TQFP; Note 1: Theta-JA from package simulations | 360 | ||
| Supply Voltage | VDD | 2 | 3.6 | V | With BOR disabled | 361 | |
| RAM Data Retention Voltage | VDR | 1.9 | V | 361 | |||
| VDD Rise Rate to Ensure Internal Power-on Reset Signal | SVDD | 0.05 | V/ms | 0-3.3V in 66 ms; 0-2.5V in 50 ms | 361 | ||
| Brown-out Reset Voltage on VDD Transition, High-to-Low | VBOR | 2 | 2.2 | V | 361 | ||
| Operating Current (IDD) 16 MIPS, FOSC = 32 MHz | IDD | 4.8 | 6.8 | mA | -40°C to +85°C, 2.0V | 361 | |
| Operating Current (IDD) 16 MIPS, FOSC = 32 MHz | IDD | 4.9 | 6.9 | mA | -40°C to +85°C, 3.3V | 361 | |
| Operating Current (IDD) LPRC (15.5 KIPS), FOSC = 31 kHz | IDD | 26 | 78 | A | -40°C to +85°C, 2.0V | 361 | |
| Operating Current (IDD) LPRC (15.5 KIPS), FOSC = 31 kHz | IDD | 26 | 80 | A | -40°C to +85°C, 3.3V | 361 | |
| Idle Current (IIDLE) 16 MIPS, FOSC = 32 MHz | IIDLE | 1 | 1.35 | mA | -40°C to +85°C, 2.0V | 362 | |
| Idle Current (IIDLE) 16 MIPS, FOSC = 32 MHz | IIDLE | 1.07 | 1.4 | mA | -40°C to +85°C, 3.3V | 362 | |
| Idle Current (IIDLE) LPRC (15.5 KIPS), FOSC = 31 kHz | IIDLE | 21 | 76 | A | -40°C to +85°C, 2.0V | 362 | |
| Idle Current (IIDLE) LPRC (15.5 KIPS), FOSC = 31 kHz | IIDLE | 21 | 78 | A | -40°C to +85°C, 3.3V | 362 | |
| Power-Down Current (IPD) Sleep | IPD | 13.6 | 27.5 | A | +85°C, 2.0V | 363 | |
| Power-Down Current (IPD) Sleep | IPD | 13.7 | 28 | A | +85°C, 3.3V | 363 | |
| Power-Down Current (IPD) Low-Voltage Sleep | IPD | 7.7 | 14.5 | A | +85°C, 2.0V | 363 | |
| Power-Down Current (IPD) Low-Voltage Sleep | IPD | 7.9 | 15 | A | +85°C, 3.3V | 363 | |
| Power-Down Current (IPD) Deep Sleep | IPD | 1.1 | A | +85°C, 2.0V | 363 | ||
| Power-Down Current (IPD) Deep Sleep | IPD | 1.4 | A | +85°C, 3.3V | 363 | ||
| Power-Down Current (IPD) RTCC with VBAT mode (LPRC/SOSC) | IPD | 0.4 | 2 | A | -40°C to +85°C, 0V | 363 | |
| Incremental Current Brown-out Reset (BOR) | 3.1 | 5 | A | -40°C to +85°C, 2.0V | 364 | ||
| Incremental Current Brown-out Reset (BOR) | 4.3 | 6 | A | -40°C to +85°C, 3.3V | 364 | ||
| Incremental Current Watch Dog Timer (WDT) | 0.8 | 1.5 | A | -40°C to +85°C, 2.0V | 364 | ||
| Incremental Current HLVD | 5.7 | 15 | A | -40°C to +85°C, 2.0V | 364 | ||
| Incremental Current Real-Time Clock and Calendar (RTCC) with SOSC | 0.4 | 1 | A | -40°C to +85°C, 2.0V | 364 | ||
| Incremental Current Real-Time Clock and Calendar (RTCC) with LPRC | 0.4 | 1 | A | -40°C to +85°C, 2.0V | 364 | ||
| Incremental Current Deep Sleep BOR (DSBOR) | 0.07 | 0.3 | A | -40°C to +85°C, 2.0V | 364 | ||
| Incremental Current Deep Sleep Watchdog Timer Reset (DSWDT) | 0.27 | 0.4 | A | -40°C to +85°C, 2.0V | 364 | ||
| Incremental Current LCD | 0.8 | 3 | A | -40°C to +85°C, 3.3V; LCD External/Internal, 1/8 MUX, 1/3 Bias | 364 | ||
| Incremental Current LCD Charge Pump | 20 | 30 | A | -40°C to +85°C, 2.0V; 1/8 MUX, 1/3 Bias | 364 | ||
| Incremental Current LCD Charge Pump | 24 | 40 | A | -40°C to +85°C, 3.3V; 1/8 MUX, 1/3 Bias | 364 | ||
| OSCO/CLKO Pin capacitive loading | COSCO | 15 | pF | In XT and HS modes when external clock is used to drive OSCI | 369 | ||
| All I/O Pins and OSCO capacitive loading | CIO | 50 | pF | EC mode | 369 | ||
| SCLx, SDAx capacitive loading | CB | 400 | pF | In I2C mode | 369 |
CAD (KiCad official)
- Symbol:
PIC24FJ128GA306-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic24fj128ga306-i-etched.step/pic24fj128ga306-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic24fj128ga306-i.step/pic24fj128ga306-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (420 pp, sha256
48bc4684bcaf450d, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC24FJ128GA306-I/PT. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC24FJ128GA306-I/MR