main
Ray pic24fj128ga202-i-ss: renamed from pic24fj128ga202-i, the part it was built from (PIC24FJ128GA202-I/SS); family listed adf2efd

PIC24FJ128GA202-I/SS

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil

PIC24FJ128GA202-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR input Master Clear (device Reset) input; bringing this line low causes a device Reset, and it uses a Schmitt Trigger input.
2 RA0/AN0/CVREF+/VREF+/C3INC/CTED1/CN2 bidirectional PORTA digital I/O (Schmitt Trigger) that also serves as 12-bit A/D analog input AN0, comparator reference input CVREF+ and A/D reference input VREF+.
3 RA1/AN1/CVREF-/VREF-/C3IND/CTED2/CN3 bidirectional PORTA digital I/O (Schmitt Trigger) that also serves as 12-bit A/D analog input AN1, comparator reference input CVREF- and A/D reference input VREF-.
4 RB0/AN2/C2INB/CTCMP/PGD1/RP0/CN4 bidirectional PORTB digital I/O (Schmitt Trigger) that also serves as analog input AN2, ICSP/debug data PGD1, remappable peripheral RP0, and comparator input C2INB.
5 RB1/AN3/C2INA/PGC1/RP1/CTED12/CN5 bidirectional PORTB digital I/O (Schmitt Trigger) that also serves as analog input AN3, ICSP/debug clock PGC1, remappable peripheral RP1, and comparator input C2INA.
6 RB2/AN4/C1INB/RP2/SDA2/T4CK/T5CK/CTED13/CN6 bidirectional PORTB digital I/O (Schmitt Trigger) that also serves as analog input AN4, remappable peripheral RP2, I2C2 data SDA2 (I2C levels), and Timer4/Timer5 clock inputs.
7 RB3/AN5/C1INA/RP3/SCL2/CTED8/CN7 bidirectional PORTB digital I/O (Schmitt Trigger) that also serves as analog input AN5, remappable peripheral RP3, and I2C2 clock SCL2 (I2C levels).
8 VSS power_in Ground reference for logic and I/O pins.
9 OSCI/CLKI/C1IND/CN30/RA2 bidirectional PORTA digital I/O (Schmitt Trigger) that also serves as the main oscillator input OSCI/CLKI (analog input buffer) and comparator input C1IND.
10 OSCO/CLKO/C2IND/CN29/RA3 bidirectional PORTA digital I/O (Schmitt Trigger) that also serves as the main oscillator output OSCO/CLKO, with its function set by the OSCIOFCN Configuration bit.
11 SOSCI/RPI4/CN1/RB4 input Input-only PORTB pin (Schmitt Trigger) that also serves as the secondary oscillator/Timer1 clock input SOSCI and remappable input RPI4.
12 SOSCO/SCLKI/CN0/RA4 input Input-only PORTA pin (Schmitt Trigger) that also serves as the secondary oscillator output SOSCO and the secondary oscillator digital clock input SCLKI.
13 VDD power_in Positive supply for peripheral digital logic and I/O pins.
14 PGD3/RP5/ASDA1/CN27/RB5 bidirectional PORTB digital I/O (Schmitt Trigger) that also serves as remappable peripheral RP5 and ICSP/debug data PGD3.
15 PGC3/RP6/ASCL1/CN24/RB6 bidirectional PORTB digital I/O (Schmitt Trigger) that also serves as remappable peripheral RP6 and ICSP/debug clock PGC3.
16 RP7/CTED3/INT0/CN23/RB7 bidirectional PORTB digital I/O (Schmitt Trigger) that also serves as remappable peripheral RP7 and external interrupt input INT0 (Schmitt Trigger).
17 TCK/RP8/SCL1/CTED10/CN22/RB8 bidirectional PORTB digital I/O (Schmitt Trigger) that also serves as remappable peripheral RP8, I2C1 clock SCL1 (I2C levels), and JTAG test clock TCK.
18 RB9/RP9/SDA1/T1CK/TDO/C1INC/C2INC/C3INC/CN21 bidirectional PORTB digital I/O (Schmitt Trigger) that also serves as remappable peripheral RP9, I2C1 data SDA1 (I2C levels), Timer1 clock T1CK, and JTAG test data output TDO.
19 VBAT power_in Backup Battery (B+) input, 1.2 V nominal, used for VBAT low-power operation.
20 VCAP/VDDCORE power_in External filter capacitor connection; when the regulator is enabled a 10 µF capacitor to ground is required on this pin, and when it is disabled the pin must be tied to a VDDCORE-level supply.
21 PGD2/TDI/RP10/CTED11/CN16/RB10 bidirectional PORTB digital I/O (Schmitt Trigger) that also serves as remappable peripheral RP10, ICSP/debug data PGD2, and JTAG test data input TDI.
22 RB11/RP11/PGC2/REFI/CTED9/CN15 bidirectional PORTB digital I/O (Schmitt Trigger) that also serves as remappable peripheral RP11, ICSP/debug clock PGC2, and reference clock input REFI.
23 AN8/HLVDIN/RP12/CN14/RB12 bidirectional PORTB digital I/O (Schmitt Trigger) that also serves as analog input AN8, high/low-voltage detect input HLVDIN, and remappable peripheral RP12.
24 AN7/C1INC/REFO/RP13/CTPLS/CN13/RB13 bidirectional PORTB digital I/O (Schmitt Trigger) that also serves as analog input AN7, remappable peripheral RP13, reference clock output REFO, and CTMU pulse output CTPLS.
25 CVREF/AN6/C3INB/RP14/RTCC/CTED5/CN12/RB14 bidirectional PORTB digital I/O (Schmitt Trigger) that also serves as analog input AN6, remappable peripheral RP14, comparator voltage reference output CVREF, and RTCC alarm/seconds pulse output RTCC.
26 AN9/C3INA/RP15/T3CK/T2CK/CTED6/CN11/RB15 bidirectional PORTB digital I/O (Schmitt Trigger) that also serves as analog input AN9, remappable peripheral RP15, and Timer2/Timer3 clock inputs T2CK/T3CK.
27 VSS power_in Ground reference for logic and I/O pins.
28 VDD power_in Positive supply for peripheral digital logic and I/O pins.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28-208mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 100 °C 375
Storage temperature -65 150 °C 375
Voltage on VDD with respect to VSS VDD -0.3 4 V 375
Voltage on 5.5V tolerant pin (incl. MCLR) with respect to VSS -0.3 4 V When VDD = 0V 375
Voltage on 5.5V tolerant pin (incl. MCLR) with respect to VSS -0.3 6 V When VDD ≥ 2.0V 375
Voltage on AVSS with respect to VSS AVSS -0.3 0.3 V 375
Voltage on VBAT with respect to VSS VBAT -0.3 4 V 375
Maximum current out of VSS pin 300 mA 375
Supply Voltage DC10 VDD 2 3.6 V BOR disabled 377
Supply Voltage with BOR enabled VBOR 3.6 V BOR enabled 377
VDD Power-on Reset Release Voltage DC16A VPORREL 1.8 1.88 1.95 V 377
Recommended VDD Rise Rate DC17A SRVDD 0.05 V/ms 0-3.3V in 66 ms, 0-2.5V in 50 ms 377
Brown-out Reset Voltage on VDD, high-to-low DC17B VBOR 2 2.1 2.2 V 377
Operating Ambient Temperature Range (Industrial) TA -40 85 °C PIC24FJ128GA204 family; -I industrial grade 376
Operating Junction Temperature Range TJ -40 125 °C 376
Operating Current (IDD) DC19 0.2 0.28 mA -40°C to +125°C, 2.0V, 0.5 MIPS 378
Operating Current (IDD) DC20A 0.21 0.28 mA -40°C to +125°C, 3.3V, FOSC = 1 MHz 378
Operating Current (IDD) DC24 5.6 7.6 mA -40°C to +125°C, 2.0V, 16 MIPS, FOSC = 32 MHz 378
Operating Current (IDD) DC24 5.7 7.6 mA -40°C to +125°C, 3.3V, FOSC = 32 MHz 378
Operating Current (IDD) LPRC DC31 23 78 µA -40°C to +85°C, 2.0V, LPRC (15.5 KIPS), FOSC = 31 kHz 378
Idle Current (IIDLE) DC40 116 150 µA -40°C to +85°C, 2.0V, 1 MIPS, FOSC = 2 MHz 379
Idle Current (IIDLE) DC40 123 160 µA -40°C to +85°C, 3.3V, 1 MIPS, FOSC = 2 MHz 379
Idle Current (IIDLE) DC47 1.6 2 mA -40°C to +85°C, 3.3V, 16 MIPS, FOSC = 32 MHz 379
Power-Down Current (IPD) Sleep DC60 2.9 17 µA -40°C, 2.0V, Sleep 380
Power-Down Current (IPD) Sleep DC60 20.5 28 µA +85°C, 3.3V, Sleep 380
Power-Down Current (IPD) Deep Sleep DC70 1.5 6 µA +85°C, 3.3V, Deep Sleep 380
Power-Down Current (IPD) RTCC with VBAT mode DC74 0.4 2 µA -40°C to +125°C, 0V, RTCC with VBAT mode (LPRC/SOSC) 380
Incremental Current Brown-out Reset (BOR) DC25 3.1 5 µA -40°C to +125°C, 2.0V 381
Incremental Current High/Low-Voltage Detect (HLVD) DC75 4.2 15 µA -40°C to +125°C, 2.0V 381
Incremental Current Real-Time Clock and Calendar (RTCC) with SOSC DC77 0.3 1 µA -40°C to +125°C, 2.0V 381
Incremental Current Deep Sleep BOR (DSBOR) DC81 0.11 0.4 µA -40°C to +125°C, 2.0V 381
Input High Voltage, digital only ST buffer DI20 5.5 V I/O pins with ST buffer, digital only 382
CNxx Pull-up Current ICNPU 150 340 550 µA AVDD = 3.3V, VPIN = VSS 382
CNxx Pull-Down Current ICNPD 150 310 550 µA AVDD = 3.3V, VPIN = VDD 382
Input Leakage Current, I/O Ports DI50 IIL -1 1 µA AVSS ≤ VPIN ≤ VDD, pin at high-impedance 382
Output Low Voltage, I/O Ports DO10 VOL 0.4 V IOL = 6.6 mA, VDD = 3.6V 383
Output High Voltage, I/O Ports DO20 VOH 3 V IOH = -3.0 mA, VDD = 3.6V 383
Output High Voltage, I/O Ports DO20 VOH 2.4 V IOH = -6.0 mA, VDD = 3.6V 383
Output High Voltage, I/O Ports DO20 VOH 1.65 V IOH = -1.0 mA, VDD = 2V 383
Output High Voltage, I/O Ports DO20 VOH 1.4 V IOH = -3.0 mA, VDD = 2V 383
Program Flash Cell Endurance D130 EP 20000 E/W -40°C to +125°C 383
Self-Timed Page Erase Time D133B TIE 20 40 ms 383
Characteristic Retention D134 TRETD 20 Year If no other specifications are violated 383
OTP Programming VDD D136 VOTP 3.1 3.6 V 383
External Filter Capacitor Value (CEFC) DVR21 CEFC 4.7 10 µF Series resistance < 3 recommended; < 5 required 384
Input Offset Voltage D300 VIOFF -40 20 40 mV Note 1: characterized, not tested 385
Common-Mode Rejection Ratio D302 CMRR 55 dB Note 1: characterized, not tested 385
Comparator Voltage Reference Absolute Accuracy VRD311 CVRAA -100 100 mV 385
Comparator Voltage Reference Settling Time VR310 TSET 10 µs Note 1: interval while CVR<4:0> transitions from '11111' to '00000' 385
Fault Input to PWM I/O Change OC15 TFD 50 ns Simple OCx/PWM mode 399
Fault Input Pulse Width OC20 TFLT 50 ns Simple OCx/PWM mode 399

CAD (KiCad official)

  • Symbol: PIC24FJ128GA202-I
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pic24fj128ga202-i-etched.step / pic24fj128ga202-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic24fj128ga202-i.step / pic24fj128ga202-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (438 pp, sha256 2aa1b00881370cec, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC24FJ128GA202-I/SS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC24FJ128GA202-I/MM
  • PIC24FJ128GA202-I/SP