main
Ray
Publish 0.1.0
d2a08d4
PIC24FJ1024GA606-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC24FJ1024GA606-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IC4/CTED4/PMD5/RE5 | bidirectional | Digital I/O port RE5 with Schmitt Trigger input and 5.5V tolerance; alternates as input capture IC4, CTMU edge input CTED4 and EPMP data bit PMD5. |
| 2 | SCL3/IC5/PMD6/RE6 | bidirectional | Digital I/O port RE6 with Schmitt Trigger input and 5.5V tolerance; alternates as I2C3 clock SCL3, input capture IC5 and EPMP data bit PMD6. |
| 3 | SDA3/IC6/PMD7/RE7 | bidirectional | Digital I/O port RE7 with Schmitt Trigger input and 5.5V tolerance; alternates as I2C3 data SDA3, input capture IC6 and EPMP data bit PMD7. |
| 4 | C1IND/RP21/ICM1/OCM1A/PMA5/RG6 | bidirectional | Digital I/O port RG6 (VDD-tolerant only); alternates as comparator 1 input D, remappable pin RP21, MCCP1 input capture ICM1, MCCP1 output OCM1A and EPMP address PMA5. |
| 5 | C1INC/RP26/OCM1B/PMA4/RG7 | bidirectional | Digital I/O port RG7 (VDD-tolerant only); alternates as comparator 1 input C, remappable pin RP26, MCCP1 output OCM1B and EPMP address PMA4. |
| 6 | C2IND/RP19/ICM2/OCM2A/PMA3/RG8 | bidirectional | Digital I/O port RG8 (VDD-tolerant only); alternates as comparator 2 input D, remappable pin RP19, MCCP2 input capture ICM2, MCCP2 output OCM2A and EPMP address PMA3. |
| 7 | MCLR | input | Master Clear input (Schmitt Trigger); bringing this line low causes a device Reset. |
| 8 | C1INC/C2INC/C3INC/RP27/OCM2B/PMA2/PMALU/RG9 | bidirectional | Digital I/O port RG9 (VDD-tolerant only); alternates as comparator 1, 2 and 3 C-inputs, remappable pin RP27, MCCP2 output OCM2B and EPMP address PMA2/PMALU. |
| 9 | VSS | power_in | Ground reference for peripheral digital logic and I/O pins; all VSS pins must always be connected. |
| 10 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins; all VDD pins must always be connected. |
| 11 | PGEC3/AN5/C1INA/RP18/ICM3/OCM3A/RB5 | bidirectional | Digital I/O port RB5 (VDD-tolerant only); alternates as ICSP clock PGEC3, analog input AN5, comparator 1 input A, remappable pin RP18, MCCP3 input capture ICM3 and output OCM3A. |
| 12 | PGED3/AN4/C1INB/RP28/OCM3B/RB4 | bidirectional | Digital I/O port RB4 (VDD-tolerant only); alternates as ICSP data PGED3, analog input AN4, comparator 1 input B, remappable pin RP28 and MCCP3 output OCM3B. |
| 13 | AN3/C2INA/RB3 | bidirectional | Digital I/O port RB3 (VDD-tolerant only); alternates as A/D analog input AN3 and comparator 2 input A. |
| 14 | AN2/CTCMP/C2INB/RP13/CTED13/RB2 | bidirectional | Digital I/O port RB2 (VDD-tolerant only); alternates as analog input AN2, CTMU comparator output CTCMP, comparator 2 input B, remappable pin RP13 and CTMU edge input CTED13. |
| 15 | PGEC1/ALTCVREF-/ALTVREF-/AN1/RP1/CTED12/RB1 | bidirectional | Digital I/O port RB1 (VDD-tolerant only); alternates as ICSP clock PGEC1, alternate low reference input ALTCVREF-/ALTVREF-, analog input AN1, remappable pin RP1 and CTMU edge input CTED12. |
| 16 | PGED1/ALTCVREF+/ALTVREF+/AN0/RP0/PMA6/RB0 | bidirectional | Digital I/O port RB0 (VDD-tolerant only); alternates as ICSP data PGED1, alternate high reference input ALTCVREF+/ALTVREF+, analog input AN0, remappable pin RP0 and EPMP address PMA6. |
| 17 | PGEC2/AN6/RP6/RB6 | bidirectional | Digital I/O port RB6 (VDD-tolerant only); alternates as ICSP clock PGEC2, analog input AN6 and remappable pin RP6. |
| 18 | PGED2/AN7/RP7/U6TX/RB7 | bidirectional | Digital I/O port RB7 (VDD-tolerant only); alternates as ICSP data PGED2, analog input AN7, remappable pin RP7 and UART6 transmit U6TX. |
| 19 | AVDD | power_in | Positive supply for analog modules; must always be connected, regardless of whether analog features are used. |
| 20 | AVSS | power_in | Ground reference for analog modules; must always be connected, regardless of whether analog features are used. |
| 21 | AN8/RP8/PWRGT/RB8 | bidirectional | Digital I/O port RB8 (VDD-tolerant only); alternates as analog input AN8, remappable pin RP8 and real-time clock power control output PWRGT. |
| 22 | AN9/TMPR/RP9/T1CK/PMA7/RB9 | bidirectional | Digital I/O port RB9 (VDD-tolerant only); alternates as analog input AN9, tamper detect input TMPR, remappable pin RP9, Timer1 clock T1CK and EPMP address PMA7. |
| 23 | TMS/CVREF/AN10/PMA13/RB10 | bidirectional | Digital I/O port RB10 (VDD-tolerant only); alternates as JTAG mode select TMS, comparator voltage reference output CVREF, analog input AN10 and EPMP address PMA13. |
| 24 | TDO/AN11/REFI/PMA12/RB11 | bidirectional | Digital I/O port RB11 (VDD-tolerant only); alternates as JTAG data output TDO, analog input AN11, reference clock input REFI and EPMP address PMA12. |
| 25 | VSS | power_in | Ground reference for peripheral digital logic and I/O pins; must always be connected. |
| 26 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins; must always be connected. |
| 27 | TCK/AN12/U6RX/CTED2/PMA11/RB12 | bidirectional | Digital I/O port RB12 (VDD-tolerant only); alternates as JTAG clock TCK, analog input AN12, UART6 receive U6RX, CTMU edge input CTED2 and EPMP address PMA11. |
| 28 | TDI/AN13/CTED1/PMA10/RB13 | bidirectional | Digital I/O port RB13 (VDD-tolerant only); alternates as JTAG data input TDI, analog input AN13, CTMU edge input CTED1 and EPMP address PMA10. |
| 29 | AN14/RP14/CTED5/CTPLS/PMA1/PMALH/RB14 | bidirectional | Digital I/O port RB14 (VDD-tolerant only); alternates as analog input AN14, remappable pin RP14, CTMU edge input CTED5, CTMU pulse output CTPLS and EPMP address PMA1/PMALH. |
| 30 | AN15/RP29/CTED6/PMA0/PMALL/RB15 | bidirectional | Digital I/O port RB15 (VDD-tolerant only); alternates as analog input AN15, remappable pin RP29, CTMU edge input CTED6 and EPMP address PMA0/PMALL. |
| 31 | RP10/SDA2/PMA9/RF4 | bidirectional | Digital I/O port RF4 (5.5V tolerant); alternates as remappable pin RP10, I2C2 data SDA2 and EPMP address PMA9. |
| 32 | RP17/SCL2/PMA8/RF5 | bidirectional | Digital I/O port RF5 (5.5V tolerant); alternates as remappable pin RP17, I2C2 clock SCL2 and EPMP address PMA8. |
| 33 | RP16/RF3 | bidirectional | Digital I/O port RF3 (5.5V tolerant); alternates as remappable pin RP16. |
| 34 | RP30/RF2 | bidirectional | Digital I/O port RF2 (5.5V tolerant); alternates as remappable pin RP30. |
| 35 | INT0/RF6 | bidirectional | Digital I/O port RF6 (5.5V tolerant); alternates as external interrupt input INT0. |
| 36 | SDA1/RG3 | bidirectional | Digital I/O port RG3 (VDD-tolerant only); alternates as I2C1 data SDA1 on this GA606 part, which has no USB function. |
| 37 | SCL1/RG2 | bidirectional | Digital I/O port RG2 (VDD-tolerant only); alternates as I2C1 clock SCL1 on this GA606 part, which has no USB function. |
| 38 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins; must always be connected. |
| 39 | OSCI/CLKI/RC12 | bidirectional | Digital I/O port RC12 (VDD-tolerant only); alternates as main oscillator input OSCI and external clock input CLKI. |
| 40 | OSCO/CLKO/RC15 | bidirectional | Digital I/O port RC15 (VDD-tolerant only); alternates as main oscillator output OSCO and system clock output CLKO. |
| 41 | VSS | power_in | Ground reference for peripheral digital logic and I/O pins; must always be connected. |
| 42 | CLC4OUT/RP2/U6RTS/U6BCLK/ICM5/RD8 | bidirectional | Digital I/O port RD8 (5.5V tolerant); alternates as CLC4 output CLC4OUT, remappable pin RP2, UART6 RTS/BCLK and SCCP5 input capture ICM5. |
| 43 | RP4/PMACK2/RD9 | bidirectional | Digital I/O port RD9 (5.5V tolerant); alternates as remappable pin RP4 and EPMP acknowledge input PMACK2. |
| 44 | RP3/PMA15/PMCS2/RD10 | bidirectional | Digital I/O port RD10 (5.5V tolerant); alternates as remappable pin RP3, EPMP address PMA15 and chip select 2 PMCS2 (remappable). |
| 45 | RP12/PMA14/PMCS1/RD11 | bidirectional | Digital I/O port RD11 (5.5V tolerant); alternates as remappable pin RP12, EPMP address PMA14 and chip select 1 PMCS1 (remappable). |
| 46 | CLC3OUT/RP11/U6CTS/ICM6/RD0 | bidirectional | Digital I/O port RD0 (5.5V tolerant); alternates as CLC3 output CLC3OUT, remappable pin RP11, UART6 CTS and SCCP6 input capture ICM6. |
| 47 | SOSCI/C3IND/RC13 | bidirectional | Digital I/O port RC13 (VDD-tolerant only); alternates as secondary oscillator input SOSCI and comparator 3 input D. |
| 48 | SOSCO/C3INC/RPI37/PWRLCLK/RC14 | bidirectional | Digital I/O port RC14 (VDD-tolerant only); alternates as secondary oscillator output SOSCO, comparator 3 input C, input-only remappable pin RPI37 and real-time clock 50/60 Hz input PWRLCLK. |
| 49 | RP24/U5TX/ICM4/RD1 | bidirectional | Digital I/O port RD1 (5.5V tolerant); alternates as remappable pin RP24, UART5 transmit U5TX and SCCP4 input capture ICM4. |
| 50 | RP23/PMACK1/RD2 | bidirectional | Digital I/O port RD2 (5.5V tolerant); alternates as remappable pin RP23 and EPMP acknowledge input PMACK1. |
| 51 | RP22/ICM7/PMBE0/RD3 | bidirectional | Digital I/O port RD3 (5.5V tolerant); alternates as remappable pin RP22, SCCP7 input capture ICM7 and EPMP byte enable PMBE0. |
| 52 | RP25/PMWR/PMENB/RD4 | bidirectional | Digital I/O port RD4 (5.5V tolerant); alternates as remappable pin RP25 and EPMP write strobe/enable PMWR/PMENB. |
| 53 | RP20/PMRD/PMWR/RD5 | bidirectional | Digital I/O port RD5 (5.5V tolerant); alternates as remappable pin RP20 and EPMP read/write strobe PMRD/PMWR. |
| 54 | C3INB/U5RX/OC4/RD6 | bidirectional | Digital I/O port RD6 (VDD-tolerant only); alternates as comparator 3 input B, UART5 receive U5RX and output compare output OC4. |
| 55 | C3INA/U5RTS/U5BCLK/OC5/RD7 | bidirectional | Digital I/O port RD7 (VDD-tolerant only); alternates as comparator 3 input A, UART5 RTS/BCLK and output compare output OC5. |
| 56 | VCAP | power_out | External filter capacitor connection for the on-chip voltage regulator; requires a 10 µF capacitor to ground and must not be connected to VDD. |
| 57 | N/C | unconnected | No internal connection on this package. |
| 58 | U5CTS/OC6/RF0 | bidirectional | Digital I/O port RF0 (5.5V tolerant); alternates as UART5 CTS input U5CTS and output compare output OC6. |
| 59 | RF1 | bidirectional | Digital I/O port RF1 (5.5V tolerant) with Schmitt Trigger input. |
| 60 | PMD0/RE0 | bidirectional | Digital I/O port RE0 (5.5V tolerant); alternates as EPMP data bit PMD0. |
| 61 | PMD1/RE1 | bidirectional | Digital I/O port RE1 (5.5V tolerant); alternates as EPMP data bit PMD1. |
| 62 | PMD2/RE2 | bidirectional | Digital I/O port RE2 (5.5V tolerant); alternates as EPMP data bit PMD2. |
| 63 | CTED9/PMD3/RE3 | bidirectional | Digital I/O port RE3 (5.5V tolerant); alternates as CTMU edge input CTED9 and EPMP data bit PMD3. |
| 64 | HLVDIN/CTED8/PMD4/RE4 | bidirectional | Digital I/O port RE4 (VDD-tolerant only); alternates as HLVD input HLVDIN, CTMU edge input CTED8 and EPMP data bit PMD4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2 | 3.6 | V | BOR is disabled | 413 | |
| Supply Voltage with BOR enabled | VBOR | 3.6 | V | BOR is enabled | 413 | ||
| Recommended VDD Rise Rate to Ensure Internal Power-on Reset Signal | SVDD | 0.05 | V/mS | 0-3.3V in 66 ms, 0-2.0V in 40 ms | 413 | ||
| Brown-out Reset Voltage on VDD Transition, High-to-Low | VBOR | 2 | 2.2 | V | -40°C < TA < +85°C | 413 | |
| Brown-out Reset Voltage on VDD Transition, High-to-Low | VBOR | 1.95 | 2.2 | V | -40°C < TA < +125°C | 413 |
CAD (KiCad official)
- Symbol:
PIC24FJ1024GA606-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic24fj1024ga606-i-pt-etched.step/pic24fj1024ga606-i-pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic24fj1024ga606-i-pt.step/pic24fj1024ga606-i-pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (470 pp, sha256
a294f3b10e36c406, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC24FJ1024GA606-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC24FJ1024GA606-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IC4/CTED4/PMD5/RE5 | bidirectional | Digital I/O port RE5 with Schmitt Trigger input and 5.5V tolerance; alternates as input capture IC4, CTMU edge input CTED4 and EPMP data bit PMD5. |
| 2 | SCL3/IC5/PMD6/RE6 | bidirectional | Digital I/O port RE6 with Schmitt Trigger input and 5.5V tolerance; alternates as I2C3 clock SCL3, input capture IC5 and EPMP data bit PMD6. |
| 3 | SDA3/IC6/PMD7/RE7 | bidirectional | Digital I/O port RE7 with Schmitt Trigger input and 5.5V tolerance; alternates as I2C3 data SDA3, input capture IC6 and EPMP data bit PMD7. |
| 4 | C1IND/RP21/ICM1/OCM1A/PMA5/RG6 | bidirectional | Digital I/O port RG6 (VDD-tolerant only); alternates as comparator 1 input D, remappable pin RP21, MCCP1 input capture ICM1, MCCP1 output OCM1A and EPMP address PMA5. |
| 5 | C1INC/RP26/OCM1B/PMA4/RG7 | bidirectional | Digital I/O port RG7 (VDD-tolerant only); alternates as comparator 1 input C, remappable pin RP26, MCCP1 output OCM1B and EPMP address PMA4. |
| 6 | C2IND/RP19/ICM2/OCM2A/PMA3/RG8 | bidirectional | Digital I/O port RG8 (VDD-tolerant only); alternates as comparator 2 input D, remappable pin RP19, MCCP2 input capture ICM2, MCCP2 output OCM2A and EPMP address PMA3. |
| 7 | MCLR | input | Master Clear input (Schmitt Trigger); bringing this line low causes a device Reset. |
| 8 | C1INC/C2INC/C3INC/RP27/OCM2B/PMA2/PMALU/RG9 | bidirectional | Digital I/O port RG9 (VDD-tolerant only); alternates as comparator 1, 2 and 3 C-inputs, remappable pin RP27, MCCP2 output OCM2B and EPMP address PMA2/PMALU. |
| 9 | VSS | power_in | Ground reference for peripheral digital logic and I/O pins; all VSS pins must always be connected. |
| 10 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins; all VDD pins must always be connected. |
| 11 | PGEC3/AN5/C1INA/RP18/ICM3/OCM3A/RB5 | bidirectional | Digital I/O port RB5 (VDD-tolerant only); alternates as ICSP clock PGEC3, analog input AN5, comparator 1 input A, remappable pin RP18, MCCP3 input capture ICM3 and output OCM3A. |
| 12 | PGED3/AN4/C1INB/RP28/OCM3B/RB4 | bidirectional | Digital I/O port RB4 (VDD-tolerant only); alternates as ICSP data PGED3, analog input AN4, comparator 1 input B, remappable pin RP28 and MCCP3 output OCM3B. |
| 13 | AN3/C2INA/RB3 | bidirectional | Digital I/O port RB3 (VDD-tolerant only); alternates as A/D analog input AN3 and comparator 2 input A. |
| 14 | AN2/CTCMP/C2INB/RP13/CTED13/RB2 | bidirectional | Digital I/O port RB2 (VDD-tolerant only); alternates as analog input AN2, CTMU comparator output CTCMP, comparator 2 input B, remappable pin RP13 and CTMU edge input CTED13. |
| 15 | PGEC1/ALTCVREF-/ALTVREF-/AN1/RP1/CTED12/RB1 | bidirectional | Digital I/O port RB1 (VDD-tolerant only); alternates as ICSP clock PGEC1, alternate low reference input ALTCVREF-/ALTVREF-, analog input AN1, remappable pin RP1 and CTMU edge input CTED12. |
| 16 | PGED1/ALTCVREF+/ALTVREF+/AN0/RP0/PMA6/RB0 | bidirectional | Digital I/O port RB0 (VDD-tolerant only); alternates as ICSP data PGED1, alternate high reference input ALTCVREF+/ALTVREF+, analog input AN0, remappable pin RP0 and EPMP address PMA6. |
| 17 | PGEC2/AN6/RP6/RB6 | bidirectional | Digital I/O port RB6 (VDD-tolerant only); alternates as ICSP clock PGEC2, analog input AN6 and remappable pin RP6. |
| 18 | PGED2/AN7/RP7/U6TX/RB7 | bidirectional | Digital I/O port RB7 (VDD-tolerant only); alternates as ICSP data PGED2, analog input AN7, remappable pin RP7 and UART6 transmit U6TX. |
| 19 | AVDD | power_in | Positive supply for analog modules; must always be connected, regardless of whether analog features are used. |
| 20 | AVSS | power_in | Ground reference for analog modules; must always be connected, regardless of whether analog features are used. |
| 21 | AN8/RP8/PWRGT/RB8 | bidirectional | Digital I/O port RB8 (VDD-tolerant only); alternates as analog input AN8, remappable pin RP8 and real-time clock power control output PWRGT. |
| 22 | AN9/TMPR/RP9/T1CK/PMA7/RB9 | bidirectional | Digital I/O port RB9 (VDD-tolerant only); alternates as analog input AN9, tamper detect input TMPR, remappable pin RP9, Timer1 clock T1CK and EPMP address PMA7. |
| 23 | TMS/CVREF/AN10/PMA13/RB10 | bidirectional | Digital I/O port RB10 (VDD-tolerant only); alternates as JTAG mode select TMS, comparator voltage reference output CVREF, analog input AN10 and EPMP address PMA13. |
| 24 | TDO/AN11/REFI/PMA12/RB11 | bidirectional | Digital I/O port RB11 (VDD-tolerant only); alternates as JTAG data output TDO, analog input AN11, reference clock input REFI and EPMP address PMA12. |
| 25 | VSS | power_in | Ground reference for peripheral digital logic and I/O pins; must always be connected. |
| 26 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins; must always be connected. |
| 27 | TCK/AN12/U6RX/CTED2/PMA11/RB12 | bidirectional | Digital I/O port RB12 (VDD-tolerant only); alternates as JTAG clock TCK, analog input AN12, UART6 receive U6RX, CTMU edge input CTED2 and EPMP address PMA11. |
| 28 | TDI/AN13/CTED1/PMA10/RB13 | bidirectional | Digital I/O port RB13 (VDD-tolerant only); alternates as JTAG data input TDI, analog input AN13, CTMU edge input CTED1 and EPMP address PMA10. |
| 29 | AN14/RP14/CTED5/CTPLS/PMA1/PMALH/RB14 | bidirectional | Digital I/O port RB14 (VDD-tolerant only); alternates as analog input AN14, remappable pin RP14, CTMU edge input CTED5, CTMU pulse output CTPLS and EPMP address PMA1/PMALH. |
| 30 | AN15/RP29/CTED6/PMA0/PMALL/RB15 | bidirectional | Digital I/O port RB15 (VDD-tolerant only); alternates as analog input AN15, remappable pin RP29, CTMU edge input CTED6 and EPMP address PMA0/PMALL. |
| 31 | RP10/SDA2/PMA9/RF4 | bidirectional | Digital I/O port RF4 (5.5V tolerant); alternates as remappable pin RP10, I2C2 data SDA2 and EPMP address PMA9. |
| 32 | RP17/SCL2/PMA8/RF5 | bidirectional | Digital I/O port RF5 (5.5V tolerant); alternates as remappable pin RP17, I2C2 clock SCL2 and EPMP address PMA8. |
| 33 | RP16/RF3 | bidirectional | Digital I/O port RF3 (5.5V tolerant); alternates as remappable pin RP16. |
| 34 | RP30/RF2 | bidirectional | Digital I/O port RF2 (5.5V tolerant); alternates as remappable pin RP30. |
| 35 | INT0/RF6 | bidirectional | Digital I/O port RF6 (5.5V tolerant); alternates as external interrupt input INT0. |
| 36 | SDA1/RG3 | bidirectional | Digital I/O port RG3 (VDD-tolerant only); alternates as I2C1 data SDA1 on this GA606 part, which has no USB function. |
| 37 | SCL1/RG2 | bidirectional | Digital I/O port RG2 (VDD-tolerant only); alternates as I2C1 clock SCL1 on this GA606 part, which has no USB function. |
| 38 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins; must always be connected. |
| 39 | OSCI/CLKI/RC12 | bidirectional | Digital I/O port RC12 (VDD-tolerant only); alternates as main oscillator input OSCI and external clock input CLKI. |
| 40 | OSCO/CLKO/RC15 | bidirectional | Digital I/O port RC15 (VDD-tolerant only); alternates as main oscillator output OSCO and system clock output CLKO. |
| 41 | VSS | power_in | Ground reference for peripheral digital logic and I/O pins; must always be connected. |
| 42 | CLC4OUT/RP2/U6RTS/U6BCLK/ICM5/RD8 | bidirectional | Digital I/O port RD8 (5.5V tolerant); alternates as CLC4 output CLC4OUT, remappable pin RP2, UART6 RTS/BCLK and SCCP5 input capture ICM5. |
| 43 | RP4/PMACK2/RD9 | bidirectional | Digital I/O port RD9 (5.5V tolerant); alternates as remappable pin RP4 and EPMP acknowledge input PMACK2. |
| 44 | RP3/PMA15/PMCS2/RD10 | bidirectional | Digital I/O port RD10 (5.5V tolerant); alternates as remappable pin RP3, EPMP address PMA15 and chip select 2 PMCS2 (remappable). |
| 45 | RP12/PMA14/PMCS1/RD11 | bidirectional | Digital I/O port RD11 (5.5V tolerant); alternates as remappable pin RP12, EPMP address PMA14 and chip select 1 PMCS1 (remappable). |
| 46 | CLC3OUT/RP11/U6CTS/ICM6/RD0 | bidirectional | Digital I/O port RD0 (5.5V tolerant); alternates as CLC3 output CLC3OUT, remappable pin RP11, UART6 CTS and SCCP6 input capture ICM6. |
| 47 | SOSCI/C3IND/RC13 | bidirectional | Digital I/O port RC13 (VDD-tolerant only); alternates as secondary oscillator input SOSCI and comparator 3 input D. |
| 48 | SOSCO/C3INC/RPI37/PWRLCLK/RC14 | bidirectional | Digital I/O port RC14 (VDD-tolerant only); alternates as secondary oscillator output SOSCO, comparator 3 input C, input-only remappable pin RPI37 and real-time clock 50/60 Hz input PWRLCLK. |
| 49 | RP24/U5TX/ICM4/RD1 | bidirectional | Digital I/O port RD1 (5.5V tolerant); alternates as remappable pin RP24, UART5 transmit U5TX and SCCP4 input capture ICM4. |
| 50 | RP23/PMACK1/RD2 | bidirectional | Digital I/O port RD2 (5.5V tolerant); alternates as remappable pin RP23 and EPMP acknowledge input PMACK1. |
| 51 | RP22/ICM7/PMBE0/RD3 | bidirectional | Digital I/O port RD3 (5.5V tolerant); alternates as remappable pin RP22, SCCP7 input capture ICM7 and EPMP byte enable PMBE0. |
| 52 | RP25/PMWR/PMENB/RD4 | bidirectional | Digital I/O port RD4 (5.5V tolerant); alternates as remappable pin RP25 and EPMP write strobe/enable PMWR/PMENB. |
| 53 | RP20/PMRD/PMWR/RD5 | bidirectional | Digital I/O port RD5 (5.5V tolerant); alternates as remappable pin RP20 and EPMP read/write strobe PMRD/PMWR. |
| 54 | C3INB/U5RX/OC4/RD6 | bidirectional | Digital I/O port RD6 (VDD-tolerant only); alternates as comparator 3 input B, UART5 receive U5RX and output compare output OC4. |
| 55 | C3INA/U5RTS/U5BCLK/OC5/RD7 | bidirectional | Digital I/O port RD7 (VDD-tolerant only); alternates as comparator 3 input A, UART5 RTS/BCLK and output compare output OC5. |
| 56 | VCAP | power_out | External filter capacitor connection for the on-chip voltage regulator; requires a 10 µF capacitor to ground and must not be connected to VDD. |
| 57 | N/C | unconnected | No internal connection on this package. |
| 58 | U5CTS/OC6/RF0 | bidirectional | Digital I/O port RF0 (5.5V tolerant); alternates as UART5 CTS input U5CTS and output compare output OC6. |
| 59 | RF1 | bidirectional | Digital I/O port RF1 (5.5V tolerant) with Schmitt Trigger input. |
| 60 | PMD0/RE0 | bidirectional | Digital I/O port RE0 (5.5V tolerant); alternates as EPMP data bit PMD0. |
| 61 | PMD1/RE1 | bidirectional | Digital I/O port RE1 (5.5V tolerant); alternates as EPMP data bit PMD1. |
| 62 | PMD2/RE2 | bidirectional | Digital I/O port RE2 (5.5V tolerant); alternates as EPMP data bit PMD2. |
| 63 | CTED9/PMD3/RE3 | bidirectional | Digital I/O port RE3 (5.5V tolerant); alternates as CTMU edge input CTED9 and EPMP data bit PMD3. |
| 64 | HLVDIN/CTED8/PMD4/RE4 | bidirectional | Digital I/O port RE4 (VDD-tolerant only); alternates as HLVD input HLVDIN, CTMU edge input CTED8 and EPMP data bit PMD4. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2 | | 3.6 | V | BOR is disabled | 413 |
| Supply Voltage with BOR enabled | VBOR | | | 3.6 | V | BOR is enabled | 413 |
| Recommended VDD Rise Rate to Ensure Internal Power-on Reset Signal | SVDD | 0.05 | | | V/mS | 0-3.3V in 66 ms, 0-2.0V in 40 ms | 413 |
| Brown-out Reset Voltage on VDD Transition, High-to-Low | VBOR | 2 | | 2.2 | V | -40°C < TA < +85°C | 413 |
| Brown-out Reset Voltage on VDD Transition, High-to-Low | VBOR | 1.95 | | 2.2 | V | -40°C < TA < +125°C | 413 |
## CAD (KiCad official)
- Symbol: `PIC24FJ1024GA606-I`
- Footprint: `Package_QFP:TQFP-64_10x10mm_P0.5mm`
- 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `pic24fj1024ga606-i-pt-etched.step` / `pic24fj1024ga606-i-pt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic24fj1024ga606-i-pt.step` / `pic24fj1024ga606-i-pt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/PIC24FJ1024GA610-GB610-Family-Data-Sheet-DS30010074G.pdf) (470 pp, sha256 `a294f3b10e36c406`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic24fj1024ga606-i-pt-datasheet.pdf)