3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC18LF26J11-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC18LF26J11-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Master Clear (Reset) input; this pin is an active-low Reset to the device. |
| 2 | RA0/AN0/C1INA/ULPWU/RP0 | bidirectional | Digital I/O pin (RA0) that can also serve as analog input 0, Comparator 1 input A, ultra low-power wake-up input and remappable peripheral pin 0. |
| 3 | RA1/AN1/C2INA/RP1 | bidirectional | Digital I/O pin (RA1) that can also serve as analog input 1, Comparator 2 input A and remappable peripheral pin 1. |
| 4 | RA2/AN2/VREF-/CVREF/C2INB | bidirectional | Digital I/O pin (RA2) that can also serve as analog input 2, A/D reference voltage (low) input, comparator reference voltage output and Comparator 2 input B. |
| 5 | RA3/AN3/VREF+/C1INB | bidirectional | Digital I/O pin (RA3) that can also serve as analog input 3, A/D reference voltage (high) input and Comparator 1 input B. |
| 6 | VDDCORE/VCAP | power_in | Core logic power supply (VDDCORE) when the regulator is disabled, or external filter capacitor connection (VCAP) when the regulator is enabled. |
| 7 | RA5/AN4/SS1/HLVDIN/RP2 | bidirectional | Digital I/O pin (RA5) that can also serve as analog input 4, SPI slave select input, high/low-voltage detect input and remappable peripheral pin 2. |
| 8 | VSS1 | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal input or external clock source input (ST buffer in RC mode, CMOS otherwise); when OSC1 is used for the clock function, RA7 is disabled. |
| 10 | OSC2/CLKO/RA6 | output | Oscillator crystal output connecting to a crystal or resonator, or CLKO outputting FOSC/4 in RC mode; when OSC2 is used for the clock function, RA6 is disabled. |
| 11 | RC0/T1OSO/T1CKI/RP11 | bidirectional | Digital I/O pin (RC0) that can also serve as Timer1 oscillator output, Timer1/Timer3 external clock input and remappable peripheral pin 11. |
| 12 | RC1/T1OSI/RP12 | bidirectional | Digital I/O pin (RC1) that can also serve as Timer1 oscillator input and remappable peripheral pin 12. |
| 13 | RC2/AN11/CTPLS/RP13 | bidirectional | Digital I/O pin (RC2) that can also serve as analog input 11, CTMU pulse generator output and remappable peripheral pin 13. |
| 14 | RC3/SCK1/SCL1/RP14 | bidirectional | Digital I/O pin (RC3) that can also serve as SPI clock input/output, I2C clock input/output and remappable peripheral pin 14. |
| 15 | RC4/SDI1/SDA1/RP15 | bidirectional | Digital I/O pin (RC4) that can also serve as SPI data input, I2C data I/O and remappable peripheral pin 15. |
| 16 | RC5/SDO1/RP16 | bidirectional | Digital I/O pin (RC5) that can also serve as SPI data output and remappable peripheral pin 16. |
| 17 | RC6/TX1/CK1/RP17 | bidirectional | Digital I/O pin (RC6) that can also serve as EUSART1 asynchronous transmit, EUSART1 synchronous clock and remappable peripheral pin 17. |
| 18 | RC7/RX1/DT1/RP18 | bidirectional | Digital I/O pin (RC7) that can also serve as EUSART1 asynchronous receive, EUSART1 synchronous data and remappable peripheral pin 18. |
| 19 | VSS2 | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 21 | RB0/AN12/INT0/RP3 | bidirectional | Digital I/O pin (RB0) with weak pull-up when RBPU is cleared, that can also serve as analog input 12, external interrupt 0 input and remappable peripheral pin 3. |
| 22 | RB1/AN10/RTCC/RP4 | bidirectional | Digital I/O pin (RB1) with weak pull-up when RBPU is cleared, that can also serve as analog input 10, Real Time Clock Calendar output and remappable peripheral pin 4. |
| 23 | RB2/AN8/CTED1/REFO/RP5 | bidirectional | Digital I/O pin (RB2) with weak pull-up when RBPU is cleared, that can also serve as analog input 8, CTMU edge 1 input, reference output clock and remappable peripheral pin 5. |
| 24 | RB3/AN9/CTED2/RP6 | bidirectional | Digital I/O pin (RB3) with weak pull-up when RBPU is cleared, that can also serve as analog input 9, CTMU edge 2 input and remappable peripheral pin 6. |
| 25 | RB4/KBI0/RP7 | bidirectional | Digital I/O pin (RB4) with weak pull-up when RBPU is cleared, that can also serve as interrupt-on-change input KBI0 and remappable peripheral pin 7. |
| 26 | RB5/KBI1/RP8 | bidirectional | Digital I/O pin (RB5) with weak pull-up when RBPU is cleared, that can also serve as interrupt-on-change input KBI1 and remappable peripheral pin 8. |
| 27 | RB6/KBI2/PGC/RP9 | bidirectional | Digital I/O pin (RB6) with weak pull-up when RBPU is cleared, that can also serve as interrupt-on-change input KBI2, ICSP clock input and remappable peripheral pin 9. |
| 28 | RB7/KBI3/PGD/RP10 | bidirectional | Digital I/O pin (RB7) with weak pull-up when RBPU is cleared, that can also serve as interrupt-on-change input KBI3, in-circuit debugger and ICSP programming data pin and remappable peripheral pin 10. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage range on VDD (LF part, regulator disabled) | VDD | 2 | 3.6 | V | LF part; supply on VDD | 12 | |
| External supply on VDDCORE (LF part) | VDDCORE | 2 | 2.7 | V | LF part; regulator disabled; VDDCORE must not exceed VDD | 12 | |
| Tunable internal oscillator frequency tolerance | -1 | 0.15 | 1 | % | Tunable internal oscillator, 31 kHz to 8 MHz | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | create the 10-bit time base. 2: These pins are remappable. | 255 |
CAD (KiCad official)
- Symbol:
PIC18LF26J11-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic18lf26j11-i-etched.step/pic18lf26j11-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18lf26j11-i.step/pic18lf26j11-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (536 pp, sha256
692546e94e6fefb6, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).