main
Ray
Publish 0.1.0
70d3149
PIC18LF2620T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC18LF2620T-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input, programming voltage input (VPP), or digital input RE3 when the MCLRE Configuration bit is cleared. |
| 2 | RA0/AN0 | bidirectional | PORTA digital I/O (TTL) or analog input 0. |
| 3 | RA1/AN1 | bidirectional | PORTA digital I/O (TTL) or analog input 1. |
| 4 | RA2/AN2/VREF-/CVREF | bidirectional | PORTA digital I/O, analog input 2, A/D reference voltage (low) input, or comparator reference voltage output. |
| 5 | RA3/AN3/VREF+ | bidirectional | PORTA digital I/O, analog input 3, or A/D reference voltage (high) input. |
| 6 | RA4/T0CKI/C1OUT | bidirectional | PORTA digital I/O (Schmitt Trigger), Timer0 external clock input, or Comparator 1 output. |
| 7 | RA5/AN4/SS/HLVDIN/C2OUT | bidirectional | PORTA digital I/O, analog input 4, SPI slave select input, High/Low-Voltage Detect input, or Comparator 2 output. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | bidirectional | Oscillator crystal or external clock input (ST buffer in RC mode, CMOS otherwise), or general purpose I/O RA7. |
| 10 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output, or in RC mode CLKO at 1/4 the OSC1 frequency denoting instruction cycle rate, or general purpose I/O RA6. |
| 11 | RC0/T1OSO/T13CKI | bidirectional | PORTC digital I/O, Timer1 oscillator output, or Timer1/Timer3 external clock input. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | PORTC digital I/O, Timer1 oscillator input, or Capture 2 input/Compare 2 output/PWM2 output (alternate CCP2 assignment). |
| 13 | RC2/CCP1 | bidirectional | PORTC digital I/O or Capture 1 input/Compare 1 output/PWM1 output. |
| 14 | RC3/SCK/SCL | bidirectional | PORTC digital I/O, synchronous serial clock for SPI mode, or synchronous serial clock for I2C mode. |
| 15 | RC4/SDI/SDA | bidirectional | PORTC digital I/O, SPI data in, or I2C data I/O. |
| 16 | RC5/SDO | bidirectional | PORTC digital I/O or SPI data out. |
| 17 | RC6/TX/CK | bidirectional | PORTC digital I/O, EUSART asynchronous transmit, or EUSART synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | PORTC digital I/O, EUSART asynchronous receive, or EUSART synchronous data. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins; LF devices operate over 2.0V to 5.5V. |
| 21 | RB0/INT0/FLT0/AN12 | bidirectional | PORTB digital I/O with optional weak pull-up, external interrupt 0, PWM Fault input, or analog input 12. |
| 22 | RB1/INT1/AN10 | bidirectional | PORTB digital I/O with optional weak pull-up, external interrupt 1, or analog input 10. |
| 23 | RB2/INT2/AN8 | bidirectional | PORTB digital I/O with optional weak pull-up, external interrupt 2, or analog input 8. |
| 24 | RB3/AN9/CCP2 | bidirectional | PORTB digital I/O, analog input 9, or Capture 2 input/Compare 2 output/PWM2 output (default CCP2 assignment per Note 1). |
| 25 | RB4/KBI0/AN11 | bidirectional | PORTB digital I/O, interrupt-on-change pin, or analog input 11. |
| 26 | RB5/KBI1/PGM | bidirectional | PORTB digital I/O, interrupt-on-change pin, or Low-Voltage ICSP programming enable pin. |
| 27 | RB6/KBI2/PGC | bidirectional | PORTB digital I/O, interrupt-on-change pin, or In-Circuit Debugger and ICSP programming clock pin. |
| 28 | RB7/KBI3/PGD | bidirectional | PORTB digital I/O, interrupt-on-change pin, or In-Circuit Debugger and ICSP programming data pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating VDD range (LF devices) | VDD | 2 | 5.5 | V | Low-voltage parts designated LF (e.g. PIC18LF2620) | 10 | |
| Operating frequency | 0 | 40 | MHz | DC, 40 MHz | 11 | ||
| Recommended RC oscillator resistor | REXT | 3 | 100 | kΩ | RC oscillator mode | 27 | |
| Recommended RC oscillator capacitor | CEXT | 20 | pF | CEXT > 20 pF | 27 | ||
| Maximum recommended analog source impedance | RS | 2.5 | kΩ | A/D analog sources | 230 |
CAD (KiCad official)
- Symbol:
PIC18LF2620T-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic18lf2620t-i-etched.step/pic18lf2620t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18lf2620t-i.step/pic18lf2620t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (412 pp, sha256
0bfeed6e8738d71f, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC18LF2620T-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC18LF2620T-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input, programming voltage input (VPP), or digital input RE3 when the MCLRE Configuration bit is cleared. |
| 2 | RA0/AN0 | bidirectional | PORTA digital I/O (TTL) or analog input 0. |
| 3 | RA1/AN1 | bidirectional | PORTA digital I/O (TTL) or analog input 1. |
| 4 | RA2/AN2/VREF-/CVREF | bidirectional | PORTA digital I/O, analog input 2, A/D reference voltage (low) input, or comparator reference voltage output. |
| 5 | RA3/AN3/VREF+ | bidirectional | PORTA digital I/O, analog input 3, or A/D reference voltage (high) input. |
| 6 | RA4/T0CKI/C1OUT | bidirectional | PORTA digital I/O (Schmitt Trigger), Timer0 external clock input, or Comparator 1 output. |
| 7 | RA5/AN4/SS/HLVDIN/C2OUT | bidirectional | PORTA digital I/O, analog input 4, SPI slave select input, High/Low-Voltage Detect input, or Comparator 2 output. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | bidirectional | Oscillator crystal or external clock input (ST buffer in RC mode, CMOS otherwise), or general purpose I/O RA7. |
| 10 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output, or in RC mode CLKO at 1/4 the OSC1 frequency denoting instruction cycle rate, or general purpose I/O RA6. |
| 11 | RC0/T1OSO/T13CKI | bidirectional | PORTC digital I/O, Timer1 oscillator output, or Timer1/Timer3 external clock input. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | PORTC digital I/O, Timer1 oscillator input, or Capture 2 input/Compare 2 output/PWM2 output (alternate CCP2 assignment). |
| 13 | RC2/CCP1 | bidirectional | PORTC digital I/O or Capture 1 input/Compare 1 output/PWM1 output. |
| 14 | RC3/SCK/SCL | bidirectional | PORTC digital I/O, synchronous serial clock for SPI mode, or synchronous serial clock for I2C mode. |
| 15 | RC4/SDI/SDA | bidirectional | PORTC digital I/O, SPI data in, or I2C data I/O. |
| 16 | RC5/SDO | bidirectional | PORTC digital I/O or SPI data out. |
| 17 | RC6/TX/CK | bidirectional | PORTC digital I/O, EUSART asynchronous transmit, or EUSART synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | PORTC digital I/O, EUSART asynchronous receive, or EUSART synchronous data. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins; LF devices operate over 2.0V to 5.5V. |
| 21 | RB0/INT0/FLT0/AN12 | bidirectional | PORTB digital I/O with optional weak pull-up, external interrupt 0, PWM Fault input, or analog input 12. |
| 22 | RB1/INT1/AN10 | bidirectional | PORTB digital I/O with optional weak pull-up, external interrupt 1, or analog input 10. |
| 23 | RB2/INT2/AN8 | bidirectional | PORTB digital I/O with optional weak pull-up, external interrupt 2, or analog input 8. |
| 24 | RB3/AN9/CCP2 | bidirectional | PORTB digital I/O, analog input 9, or Capture 2 input/Compare 2 output/PWM2 output (default CCP2 assignment per Note 1). |
| 25 | RB4/KBI0/AN11 | bidirectional | PORTB digital I/O, interrupt-on-change pin, or analog input 11. |
| 26 | RB5/KBI1/PGM | bidirectional | PORTB digital I/O, interrupt-on-change pin, or Low-Voltage ICSP programming enable pin. |
| 27 | RB6/KBI2/PGC | bidirectional | PORTB digital I/O, interrupt-on-change pin, or In-Circuit Debugger and ICSP programming clock pin. |
| 28 | RB7/KBI3/PGD | bidirectional | PORTB digital I/O, interrupt-on-change pin, or In-Circuit Debugger and ICSP programming data pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating VDD range (LF devices) | VDD | 2 | | 5.5 | V | Low-voltage parts designated LF (e.g. PIC18LF2620) | 10 |
| Operating frequency | | 0 | | 40 | MHz | DC, 40 MHz | 11 |
| Recommended RC oscillator resistor | REXT | 3 | | 100 | kΩ | RC oscillator mode | 27 |
| Recommended RC oscillator capacitor | CEXT | 20 | | | pF | CEXT > 20 pF | 27 |
| Maximum recommended analog source impedance | RS | | | 2.5 | kΩ | A/D analog sources | 230 |
## CAD (KiCad official)
- Symbol: `PIC18LF2620T-I`
- Footprint: `Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm`
- 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files: `pic18lf2620t-i-etched.step` / `pic18lf2620t-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic18lf2620t-i.step` / `pic18lf2620t-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic18lf2620t-i-datasheet.pdf) (412 pp, sha256 `0bfeed6e8738d71f`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic18lf2620t-i-datasheet.pdf)