← Commit history
README.md+44−44
@@ -8,34 +8,34 @@ PIC18LF2515-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descripti  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | MCLR/VPP/RE3 | input | Master Clear (Reset) input is active-low and resets the device; VPP is the programming voltage input, and RE3 is a digital input only when the MCLRE Configuration bit is clear. |-| 2 | RA0/AN0 | bidirectional | Digital I/O (TTL input) and analog input channel 0. |-| 3 | RA1/AN1 | bidirectional | Digital I/O (TTL input) and analog input channel 1. |-| 4 | RA2/AN2/VREF-/CVREF | bidirectional | Digital I/O (TTL input); analog input 2; A/D reference voltage (low) input; comparator reference voltage output (CVREF). |-| 5 | RA3/AN3/VREF+ | bidirectional | Digital I/O (TTL input); analog input 3; A/D reference voltage (high) input. |-| 6 | RA4/T0CKI/C1OUT | bidirectional | Digital I/O with Schmitt Trigger input; Timer0 external clock input (T0CKI); Comparator 1 output (C1OUT). |-| 7 | RA5/AN4/SS/HLVDIN/C2OUT | bidirectional | Digital I/O (TTL input); analog input 4; SPI slave select input; High/Low-Voltage Detect input; Comparator 2 output. |+| 1 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input, also the programming voltage input VPP, or digital input RE3 when MCLR functionality is disabled. |+| 2 | RA0/AN0 | bidirectional | PORTA bit 0 digital I/O (TTL input), or analog input channel 0. |+| 3 | RA1/AN1 | bidirectional | PORTA bit 1 digital I/O (TTL input), or analog input channel 1. |+| 4 | RA2/AN2/VREF-/CVREF | bidirectional | PORTA bit 2 digital I/O, or analog input 2, A/D reference voltage (low) input, or comparator reference voltage output CVREF. |+| 5 | RA3/AN3/VREF+ | bidirectional | PORTA bit 3 digital I/O, or analog input 3, or A/D reference voltage (high) input VREF+. |+| 6 | RA4/T0CKI/C1OUT | bidirectional | PORTA bit 4 digital I/O (Schmitt Trigger input), or Timer0 external clock input T0CKI, or Comparator 1 output C1OUT. |+| 7 | RA5/AN4/SS/HLVDIN/C2OUT | bidirectional | PORTA bit 5 digital I/O, or analog input 4, or MSSP SPI slave select input SS, or High/Low-Voltage Detect input HLVDIN, or Comparator 2 output C2OUT. | | 8 | VSS | power_in | Ground reference for logic and I/O pins. |-| 9 | OSC1/CLKI/RA7 | bidirectional | Oscillator crystal input or external clock source input (ST buffer in RC mode); RA7 is general purpose I/O when the selected oscillator mode does not use this pin. |-| 10 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output connecting to a crystal or resonator, CLKO (FOSC/4) in RC mode, or general purpose I/O RA6 in RCIO, INTIO2 and ECIO modes. |-| 11 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O with Schmitt Trigger input; Timer1 oscillator output (T1OSO); Timer1/Timer3 external clock input (T13CKI). |-| 12 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O with Schmitt Trigger input; Timer1 oscillator input (T1OSI); CCP2 capture input/compare and PWM output (default CCP2 pin when CCP2MX is set). |-| 13 | RC2/CCP1 | bidirectional | Digital I/O with Schmitt Trigger input; CCP1 capture input, compare output or PWM output. |-| 14 | RC3/SCK/SCL | bidirectional | Digital I/O with Schmitt Trigger input; synchronous serial clock input/output for SPI mode; synchronous serial clock input/output for I2C mode. |-| 15 | RC4/SDI/SDA | bidirectional | Digital I/O with Schmitt Trigger input; SPI data input; I2C data I/O. |-| 16 | RC5/SDO | bidirectional | Digital I/O with Schmitt Trigger input; SPI data output. |-| 17 | RC6/TX/CK | bidirectional | Digital I/O with Schmitt Trigger input; EUSART asynchronous transmit (TX); EUSART synchronous clock (CK). |-| 18 | RC7/RX/DT | bidirectional | Digital I/O with Schmitt Trigger input; EUSART asynchronous receive (RX); EUSART synchronous data (DT). |+| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input (CLKI) in crystal/external modes; otherwise general purpose I/O RA7. |+| 10 | OSC2/CLKO/RA6 | output | Oscillator crystal output connecting to crystal or resonator, or CLKO (FOSC/4) output in RC modes; otherwise general purpose I/O RA6. |+| 11 | RC0/T1OSO/T13CKI | bidirectional | PORTC bit 0 digital I/O (Schmitt Trigger input), or Timer1 oscillator output T1OSO, or Timer1/Timer3 external clock input T13CKI. |+| 12 | RC1/T1OSI/CCP2 | bidirectional | PORTC bit 1 digital I/O, or Timer1 oscillator input T1OSI, or CCP2 capture input / compare output / PWM output. |+| 13 | RC2/CCP1 | bidirectional | PORTC bit 2 digital I/O, or CCP1 capture input / compare output / PWM output. |+| 14 | RC3/SCK/SCL | bidirectional | PORTC bit 3 digital I/O, or MSSP synchronous serial clock input/output for SPI (SCK) or I2C (SCL). |+| 15 | RC4/SDI/SDA | bidirectional | PORTC bit 4 digital I/O, or MSSP SPI data input SDI, or I2C data I/O SDA. |+| 16 | RC5/SDO | bidirectional | PORTC bit 5 digital I/O, or MSSP SPI data output SDO. |+| 17 | RC6/TX/CK | bidirectional | PORTC bit 6 digital I/O, or EUSART asynchronous transmit TX, or EUSART synchronous clock CK. |+| 18 | RC7/RX/DT | bidirectional | PORTC bit 7 digital I/O, or EUSART asynchronous receive RX, or EUSART synchronous data DT. | | 19 | VSS | power_in | Ground reference for logic and I/O pins. |-| 20 | VDD | power_in | Positive supply for logic and I/O pins; low-voltage (LF) devices such as PIC18LF2515 operate over an extended VDD range of 2.0V to 5.5V. |-| 21 | RB0/INT0/FLT0/AN12 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared; external interrupt 0 (INT0); PWM Fault input for CCP1 (FLT0); analog input 12. |-| 22 | RB1/INT1/AN10 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared; external interrupt 1 (INT1); analog input 10. |-| 23 | RB2/INT2/AN8 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared; external interrupt 2 (INT2); analog input 8. |-| 24 | RB3/AN9/CCP2 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared; analog input 9; CCP2 capture input or compare/PWM output when CCP2MX is cleared (alternate CCP2 pin). |-| 25 | RB4/KBI0/AN11 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared; interrupt-on-change pin (KBI0); analog input 11. |-| 26 | RB5/KBI1/PGM | bidirectional | Digital I/O with weak pull-up when RBPU is cleared; interrupt-on-change pin (KBI1); low-voltage ICSP programming enable pin (PGM). |-| 27 | RB6/KBI2/PGC | bidirectional | Digital I/O with weak pull-up when RBPU is cleared; interrupt-on-change pin (KBI2); in-circuit debugger and ICSP programming clock (PGC). |-| 28 | RB7/KBI3/PGD | bidirectional | Digital I/O with weak pull-up when RBPU is cleared; interrupt-on-change pin (KBI3); in-circuit debugger and ICSP programming data (PGD). |+| 20 | VDD | power_in | Positive supply for logic and I/O pins. |+| 21 | RB0/INT0/FLT0/AN12 | bidirectional | PORTB bit 0 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT0, or PWM Fault input FLT0 for CCP1, or analog input 12. |+| 22 | RB1/INT1/AN10 | bidirectional | PORTB bit 1 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT1, or analog input 10. |+| 23 | RB2/INT2/AN8 | bidirectional | PORTB bit 2 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT2, or analog input 8. |+| 24 | RB3/AN9/CCP2 | bidirectional | PORTB bit 3 digital I/O with weak pull-up when RBPU is cleared, or analog input 9, or CCP2 capture input / compare and PWM output when CCP2MX is cleared. |+| 25 | RB4/KBI0/AN11 | bidirectional | PORTB bit 4 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI0, or analog input 11. |+| 26 | RB5/KBI1/PGM | bidirectional | PORTB bit 5 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI1, or Low-Voltage ICSP programming enable pin PGM. |+| 27 | RB6/KBI2/PGC | bidirectional | PORTB bit 6 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI2, or In-Circuit Debugger and ICSP programming clock PGC. |+| 28 | RB7/KBI3/PGD | bidirectional | PORTB bit 7 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI3, or In-Circuit Debugger and ICSP programming data PGD. |  ## Key specifications @@ -52,23 +52,23 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Operating temperature (industrial, -I suffix) | TA | -40 |  | 85 | °C | Standard Operating Conditions, -40°C ≤ TA ≤ +85°C for industrial | 328 |-| Extended supply voltage range for LF (low-voltage) devices | VDD | 2 |  | 5.5 | V |  | 8 |-| D420 HLVD Voltage on VDD Transition High to Low |  | 2.06 | 2.17 | 2.28 | V | LVV = 0000 | 328 |-| D420 HLVD Voltage on VDD Transition High to Low |  | 2.12 | 2.23 | 2.34 | V | LVV = 0001 | 328 |-| D420 HLVD Voltage on VDD Transition High to Low |  | 2.24 | 2.36 | 2.48 | V | LVV = 0010 | 328 |-| D420 HLVD Voltage on VDD Transition High to Low |  | 2.32 | 2.44 | 2.56 | V | LVV = 0011 | 328 |-| D420 HLVD Voltage on VDD Transition High to Low |  | 2.47 | 2.6 | 2.73 | V | LVV = 0100 | 328 |-| D420 HLVD Voltage on VDD Transition High to Low |  | 2.65 | 2.79 | 2.93 | V | LVV = 0101 | 328 |-| D420 HLVD Voltage on VDD Transition High to Low |  | 2.74 | 2.89 | 3.04 | V | LVV = 0110 | 328 |-| D420 HLVD Voltage on VDD Transition High to Low |  | 2.96 | 3.12 | 3.28 | V | LVV = 0111 | 328 |-| D420 HLVD Voltage on VDD Transition High to Low |  | 3.22 | 3.39 | 3.56 | V | LVV = 1000 | 328 |-| D420 HLVD Voltage on VDD Transition High to Low |  | 3.37 | 3.55 | 3.73 | V | LVV = 1001 | 328 |-| D420 HLVD Voltage on VDD Transition High to Low |  | 3.52 | 3.71 | 3.9 | V | LVV = 1010 | 328 |-| D420 HLVD Voltage on VDD Transition High to Low |  | 3.7 | 3.9 | 4.1 | V | LVV = 1011 | 328 |-| D420 HLVD Voltage on VDD Transition High to Low |  | 3.9 | 4.11 | 4.32 | V | LVV = 1100 | 328 |-| D420 HLVD Voltage on VDD Transition High to Low |  | 4.11 | 4.33 | 4.55 | V | LVV = 1101 | 328 |-| D420 HLVD Voltage on VDD Transition High to Low |  | 4.36 | 4.59 | 4.82 | V | LVV = 1110 | 328 |+| VDD operating supply voltage (LF extended range) | VDD | 2 |  | 5.5 | V | PIC18LF (LF) devices, extended VDD range | 8 |+| Operating temperature range (industrial) | TA | -40 |  | 85 | °C | Industrial; Standard Operating Conditions | 328 |+| HLVD Voltage on VDD Transition High to Low (Param D420) |  | 2.06 | 2.17 | 2.28 | V | LVV = 0000 | 328 |+| HLVD Voltage on VDD Transition High to Low (Param D420) |  | 2.12 | 2.23 | 2.34 | V | LVV = 0001 | 328 |+| HLVD Voltage on VDD Transition High to Low (Param D420) |  | 2.24 | 2.36 | 2.48 | V | LVV = 0010 | 328 |+| HLVD Voltage on VDD Transition High to Low (Param D420) |  | 2.32 | 2.44 | 2.56 | V | LVV = 0011 | 328 |+| HLVD Voltage on VDD Transition High to Low (Param D420) |  | 2.47 | 2.6 | 2.73 | V | LVV = 0100 | 328 |+| HLVD Voltage on VDD Transition High to Low (Param D420) |  | 2.65 | 2.79 | 2.93 | V | LVV = 0101 | 328 |+| HLVD Voltage on VDD Transition High to Low (Param D420) |  | 2.74 | 2.89 | 3.04 | V | LVV = 0110 | 328 |+| HLVD Voltage on VDD Transition High to Low (Param D420) |  | 2.96 | 3.12 | 3.28 | V | LVV = 0111 | 328 |+| HLVD Voltage on VDD Transition High to Low (Param D420) |  | 3.22 | 3.39 | 3.56 | V | LVV = 1000 | 328 |+| HLVD Voltage on VDD Transition High to Low (Param D420) |  | 3.37 | 3.55 | 3.73 | V | LVV = 1001 | 328 |+| HLVD Voltage on VDD Transition High to Low (Param D420) |  | 3.52 | 3.71 | 3.9 | V | LVV = 1010 | 328 |+| HLVD Voltage on VDD Transition High to Low (Param D420) |  | 3.7 | 3.9 | 4.1 | V | LVV = 1011 | 328 |+| HLVD Voltage on VDD Transition High to Low (Param D420) |  | 3.9 | 4.11 | 4.32 | V | LVV = 1100 | 328 |+| HLVD Voltage on VDD Transition High to Low (Param D420) |  | 4.11 | 4.33 | 4.55 | V | LVV = 1101 | 328 |+| HLVD Voltage on VDD Transition High to Low (Param D420) |  | 4.36 | 4.59 | 4.82 | V | LVV = 1110 | 328 |  ## CAD (KiCad official) @@ -81,7 +81,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](docs/pic18lf2515-i-so-datasheet.pdf) (376 pp, sha256 `58bdc0dc5321bdfe`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/39636d.pdf) (376 pp, sha256 `58bdc0dc5321bdfe`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+41−43
@@ -1,6 +1,6 @@ {   "slug": "pic18lf2515-i-so",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pic18lf2515-i-so-hero.glb",-    "pic18lf2515-i-so-hero.overlay.json",-    "pic18lf2515-i-so-etched.glb"+    "pic18lf2515-i-so-hero.overlay.json"   ],   "component": {     "mpn": "PIC18LF2515-I/SO",@@ -38,12 +37,12 @@     "pin_count": 28,     "category": "Single Chip Microcomputer/Microcontroller",     "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",-    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/d7007c6594ed68fa8c1843b538cd7ae0.pdf",+    "datasheet": "https://ww1.microchip.com/downloads/en/DeviceDoc/39636d.pdf",     "parts": {       "symbol": "pic18lf2515-i-so.kicad_sym",       "footprint": "pic18lf2515-i-so.kicad_mod",       "model_3d": "pic18lf2515-i-so-hero.glb",-      "model_3d_plain": "pic18lf2515-i-so-etched.glb",+      "model_3d_plain": "pic18lf2515-i-so.glb",       "model_3d_step": "pic18lf2515-i-so-etched.step",       "model_3d_step_plain": "pic18lf2515-i-so.step",       "lbr": "pic18lf2515-i-so.lbr"@@ -54,12 +53,11 @@       "mouser": "579-PIC18LF2515-I/SO"     },     "distributor_check": {-      "checked_at": "2026-11-12T17:44:11Z",+      "checked_at": "2026-11-13T00:26:02Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC18LF2515-I/SO-ND",-        "status": "found",-        "lifecycle": "Active"+        "status": "found"       },       "mouser": {         "pn": "579-PIC18LF2515-I/SO",@@ -72,43 +70,43 @@         "number": "1",         "name": "MCLR/VPP/RE3",         "type": "input",-        "description": "Master Clear (Reset) input is active-low and resets the device; VPP is the programming voltage input, and RE3 is a digital input only when the MCLRE Configuration bit is clear."+        "description": "Active-low Master Clear (Reset) input, also the programming voltage input VPP, or digital input RE3 when MCLR functionality is disabled."       },       {         "number": "2",         "name": "RA0/AN0",         "type": "bidirectional",-        "description": "Digital I/O (TTL input) and analog input channel 0."+        "description": "PORTA bit 0 digital I/O (TTL input), or analog input channel 0."       },       {         "number": "3",         "name": "RA1/AN1",         "type": "bidirectional",-        "description": "Digital I/O (TTL input) and analog input channel 1."+        "description": "PORTA bit 1 digital I/O (TTL input), or analog input channel 1."       },       {         "number": "4",         "name": "RA2/AN2/VREF-/CVREF",         "type": "bidirectional",-        "description": "Digital I/O (TTL input); analog input 2; A/D reference voltage (low) input; comparator reference voltage output (CVREF)."+        "description": "PORTA bit 2 digital I/O, or analog input 2, A/D reference voltage (low) input, or comparator reference voltage output CVREF."       },       {         "number": "5",         "name": "RA3/AN3/VREF+",         "type": "bidirectional",-        "description": "Digital I/O (TTL input); analog input 3; A/D reference voltage (high) input."+        "description": "PORTA bit 3 digital I/O, or analog input 3, or A/D reference voltage (high) input VREF+."       },       {         "number": "6",         "name": "RA4/T0CKI/C1OUT",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Timer0 external clock input (T0CKI); Comparator 1 output (C1OUT)."+        "description": "PORTA bit 4 digital I/O (Schmitt Trigger input), or Timer0 external clock input T0CKI, or Comparator 1 output C1OUT."       },       {         "number": "7",         "name": "RA5/AN4/SS/HLVDIN/C2OUT",         "type": "bidirectional",-        "description": "Digital I/O (TTL input); analog input 4; SPI slave select input; High/Low-Voltage Detect input; Comparator 2 output."+        "description": "PORTA bit 5 digital I/O, or analog input 4, or MSSP SPI slave select input SS, or High/Low-Voltage Detect input HLVDIN, or Comparator 2 output C2OUT."       },       {         "number": "8",@@ -119,62 +117,62 @@       {         "number": "9",         "name": "OSC1/CLKI/RA7",-        "type": "bidirectional",-        "description": "Oscillator crystal input or external clock source input (ST buffer in RC mode); RA7 is general purpose I/O when the selected oscillator mode does not use this pin."+        "type": "input",+        "description": "Oscillator crystal or external clock input (CLKI) in crystal/external modes; otherwise general purpose I/O RA7."       },       {         "number": "10",         "name": "OSC2/CLKO/RA6",-        "type": "bidirectional",-        "description": "Oscillator crystal output connecting to a crystal or resonator, CLKO (FOSC/4) in RC mode, or general purpose I/O RA6 in RCIO, INTIO2 and ECIO modes."+        "type": "output",+        "description": "Oscillator crystal output connecting to crystal or resonator, or CLKO (FOSC/4) output in RC modes; otherwise general purpose I/O RA6."       },       {         "number": "11",         "name": "RC0/T1OSO/T13CKI",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Timer1 oscillator output (T1OSO); Timer1/Timer3 external clock input (T13CKI)."+        "description": "PORTC bit 0 digital I/O (Schmitt Trigger input), or Timer1 oscillator output T1OSO, or Timer1/Timer3 external clock input T13CKI."       },       {         "number": "12",         "name": "RC1/T1OSI/CCP2",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Timer1 oscillator input (T1OSI); CCP2 capture input/compare and PWM output (default CCP2 pin when CCP2MX is set)."+        "description": "PORTC bit 1 digital I/O, or Timer1 oscillator input T1OSI, or CCP2 capture input / compare output / PWM output."       },       {         "number": "13",         "name": "RC2/CCP1",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; CCP1 capture input, compare output or PWM output."+        "description": "PORTC bit 2 digital I/O, or CCP1 capture input / compare output / PWM output."       },       {         "number": "14",         "name": "RC3/SCK/SCL",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; synchronous serial clock input/output for SPI mode; synchronous serial clock input/output for I2C mode."+        "description": "PORTC bit 3 digital I/O, or MSSP synchronous serial clock input/output for SPI (SCK) or I2C (SCL)."       },       {         "number": "15",         "name": "RC4/SDI/SDA",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; SPI data input; I2C data I/O."+        "description": "PORTC bit 4 digital I/O, or MSSP SPI data input SDI, or I2C data I/O SDA."       },       {         "number": "16",         "name": "RC5/SDO",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; SPI data output."+        "description": "PORTC bit 5 digital I/O, or MSSP SPI data output SDO."       },       {         "number": "17",         "name": "RC6/TX/CK",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; EUSART asynchronous transmit (TX); EUSART synchronous clock (CK)."+        "description": "PORTC bit 6 digital I/O, or EUSART asynchronous transmit TX, or EUSART synchronous clock CK."       },       {         "number": "18",         "name": "RC7/RX/DT",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; EUSART asynchronous receive (RX); EUSART synchronous data (DT)."+        "description": "PORTC bit 7 digital I/O, or EUSART asynchronous receive RX, or EUSART synchronous data DT."       },       {         "number": "19",@@ -186,55 +184,55 @@         "number": "20",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply for logic and I/O pins; low-voltage (LF) devices such as PIC18LF2515 operate over an extended VDD range of 2.0V to 5.5V."+        "description": "Positive supply for logic and I/O pins."       },       {         "number": "21",         "name": "RB0/INT0/FLT0/AN12",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up when RBPU is cleared; external interrupt 0 (INT0); PWM Fault input for CCP1 (FLT0); analog input 12."+        "description": "PORTB bit 0 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT0, or PWM Fault input FLT0 for CCP1, or analog input 12."       },       {         "number": "22",         "name": "RB1/INT1/AN10",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up when RBPU is cleared; external interrupt 1 (INT1); analog input 10."+        "description": "PORTB bit 1 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT1, or analog input 10."       },       {         "number": "23",         "name": "RB2/INT2/AN8",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up when RBPU is cleared; external interrupt 2 (INT2); analog input 8."+        "description": "PORTB bit 2 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT2, or analog input 8."       },       {         "number": "24",         "name": "RB3/AN9/CCP2",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up when RBPU is cleared; analog input 9; CCP2 capture input or compare/PWM output when CCP2MX is cleared (alternate CCP2 pin)."+        "description": "PORTB bit 3 digital I/O with weak pull-up when RBPU is cleared, or analog input 9, or CCP2 capture input / compare and PWM output when CCP2MX is cleared."       },       {         "number": "25",         "name": "RB4/KBI0/AN11",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up when RBPU is cleared; interrupt-on-change pin (KBI0); analog input 11."+        "description": "PORTB bit 4 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI0, or analog input 11."       },       {         "number": "26",         "name": "RB5/KBI1/PGM",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up when RBPU is cleared; interrupt-on-change pin (KBI1); low-voltage ICSP programming enable pin (PGM)."+        "description": "PORTB bit 5 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI1, or Low-Voltage ICSP programming enable pin PGM."       },       {         "number": "27",         "name": "RB6/KBI2/PGC",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up when RBPU is cleared; interrupt-on-change pin (KBI2); in-circuit debugger and ICSP programming clock (PGC)."+        "description": "PORTB bit 6 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI2, or In-Circuit Debugger and ICSP programming clock PGC."       },       {         "number": "28",         "name": "RB7/KBI3/PGD",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up when RBPU is cleared; interrupt-on-change pin (KBI3); in-circuit debugger and ICSP programming data (PGD)."+        "description": "PORTB bit 7 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI3, or In-Circuit Debugger and ICSP programming data PGD."       }     ],     "provenance": {@@ -248,15 +246,15 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin 1 is shared as MCLR/VPP/RE3; whether it is MCLR or RE3 depends on the MCLRE Configuration bit, s; CCP2 is multiplexed between RC1 and RB3; the default assignment is set by the CCP2MX Configuration b; OSC1/CLKI/RA7 and OSC2/CLKO/RA6 change function with the oscillator Configuration bits (FOSC3:FOSC0)",+          "extractor flagged: Pin 1 is multi-function (MCLR/VPP/RE3); it was typed as input because MCLR is the primary function. ; Pins 9 and 10 are multi-function oscillator/I/O pins; they were typed by their oscillator function (; Table 1-3 lists the SPDIP and SOIC pin numbers together with the QFN numbers; this extraction uses t",           "1/28 pins cited to the wrong page (name found elsewhere): ['6:RA4/T0CKI/C1OUT@p14']"         ],         "pages_sent": 66,-        "cost_usd": 0.3501,-        "at": "2026-11-12T17:43:43"+        "cost_usd": 0.3473,+        "at": "2026-11-13T00:25:40"       },       "datasheet": {-        "url": "https://datasheet.lcsc.com/datasheet/pdf/d7007c6594ed68fa8c1843b538cd7ae0.pdf",+        "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/39636d.pdf",         "pages": 376,         "sha256": "58bdc0dc5321bdfe",         "source_tier": "mfr"@@ -290,7 +288,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -308,8 +306,8 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "13bd33cb8c0d001604b618946032b8b74c0687fdb973a88774a5dd8c7cb349cc",-        "checked": "2026-11-12",+        "sha256": "5a7cf396eb347754bbf09f7d50363ee170d3968b070185a9bef77b93707f3060",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+44−44
@@ -4,7 +4,7 @@   "slug": "pic18lf2515-i-so",   "title": "PIC18LF2515-I/SO",   "brief": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -20,12 +20,12 @@     "pin_count": 28,     "category": "Single Chip Microcomputer/Microcontroller",     "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",-    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/d7007c6594ed68fa8c1843b538cd7ae0.pdf",+    "datasheet": "https://ww1.microchip.com/downloads/en/DeviceDoc/39636d.pdf",     "parts": {       "symbol": "pic18lf2515-i-so.kicad_sym",       "footprint": "pic18lf2515-i-so.kicad_mod",       "model_3d": "pic18lf2515-i-so-hero.glb",-      "model_3d_plain": "pic18lf2515-i-so-etched.glb",+      "model_3d_plain": "pic18lf2515-i-so.glb",       "model_3d_step": "pic18lf2515-i-so-etched.step",       "model_3d_step_plain": "pic18lf2515-i-so.step",       "lbr": "pic18lf2515-i-so.lbr"@@ -36,12 +36,11 @@       "mouser": "579-PIC18LF2515-I/SO"     },     "distributor_check": {-      "checked_at": "2026-11-12T17:44:11Z",+      "checked_at": "2026-11-13T00:26:02Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC18LF2515-I/SO-ND",-        "status": "found",-        "lifecycle": "Active"+        "status": "found"       },       "mouser": {         "pn": "579-PIC18LF2515-I/SO",@@ -54,43 +53,43 @@         "number": "1",         "name": "MCLR/VPP/RE3",         "type": "input",-        "description": "Master Clear (Reset) input is active-low and resets the device; VPP is the programming voltage input, and RE3 is a digital input only when the MCLRE Configuration bit is clear."+        "description": "Active-low Master Clear (Reset) input, also the programming voltage input VPP, or digital input RE3 when MCLR functionality is disabled."       },       {         "number": "2",         "name": "RA0/AN0",         "type": "bidirectional",-        "description": "Digital I/O (TTL input) and analog input channel 0."+        "description": "PORTA bit 0 digital I/O (TTL input), or analog input channel 0."       },       {         "number": "3",         "name": "RA1/AN1",         "type": "bidirectional",-        "description": "Digital I/O (TTL input) and analog input channel 1."+        "description": "PORTA bit 1 digital I/O (TTL input), or analog input channel 1."       },       {         "number": "4",         "name": "RA2/AN2/VREF-/CVREF",         "type": "bidirectional",-        "description": "Digital I/O (TTL input); analog input 2; A/D reference voltage (low) input; comparator reference voltage output (CVREF)."+        "description": "PORTA bit 2 digital I/O, or analog input 2, A/D reference voltage (low) input, or comparator reference voltage output CVREF."       },       {         "number": "5",         "name": "RA3/AN3/VREF+",         "type": "bidirectional",-        "description": "Digital I/O (TTL input); analog input 3; A/D reference voltage (high) input."+        "description": "PORTA bit 3 digital I/O, or analog input 3, or A/D reference voltage (high) input VREF+."       },       {         "number": "6",         "name": "RA4/T0CKI/C1OUT",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Timer0 external clock input (T0CKI); Comparator 1 output (C1OUT)."+        "description": "PORTA bit 4 digital I/O (Schmitt Trigger input), or Timer0 external clock input T0CKI, or Comparator 1 output C1OUT."       },       {         "number": "7",         "name": "RA5/AN4/SS/HLVDIN/C2OUT",         "type": "bidirectional",-        "description": "Digital I/O (TTL input); analog input 4; SPI slave select input; High/Low-Voltage Detect input; Comparator 2 output."+        "description": "PORTA bit 5 digital I/O, or analog input 4, or MSSP SPI slave select input SS, or High/Low-Voltage Detect input HLVDIN, or Comparator 2 output C2OUT."       },       {         "number": "8",@@ -101,62 +100,62 @@       {         "number": "9",         "name": "OSC1/CLKI/RA7",-        "type": "bidirectional",-        "description": "Oscillator crystal input or external clock source input (ST buffer in RC mode); RA7 is general purpose I/O when the selected oscillator mode does not use this pin."+        "type": "input",+        "description": "Oscillator crystal or external clock input (CLKI) in crystal/external modes; otherwise general purpose I/O RA7."       },       {         "number": "10",         "name": "OSC2/CLKO/RA6",-        "type": "bidirectional",-        "description": "Oscillator crystal output connecting to a crystal or resonator, CLKO (FOSC/4) in RC mode, or general purpose I/O RA6 in RCIO, INTIO2 and ECIO modes."+        "type": "output",+        "description": "Oscillator crystal output connecting to crystal or resonator, or CLKO (FOSC/4) output in RC modes; otherwise general purpose I/O RA6."       },       {         "number": "11",         "name": "RC0/T1OSO/T13CKI",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Timer1 oscillator output (T1OSO); Timer1/Timer3 external clock input (T13CKI)."+        "description": "PORTC bit 0 digital I/O (Schmitt Trigger input), or Timer1 oscillator output T1OSO, or Timer1/Timer3 external clock input T13CKI."       },       {         "number": "12",         "name": "RC1/T1OSI/CCP2",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Timer1 oscillator input (T1OSI); CCP2 capture input/compare and PWM output (default CCP2 pin when CCP2MX is set)."+        "description": "PORTC bit 1 digital I/O, or Timer1 oscillator input T1OSI, or CCP2 capture input / compare output / PWM output."       },       {         "number": "13",         "name": "RC2/CCP1",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; CCP1 capture input, compare output or PWM output."+        "description": "PORTC bit 2 digital I/O, or CCP1 capture input / compare output / PWM output."       },       {         "number": "14",         "name": "RC3/SCK/SCL",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; synchronous serial clock input/output for SPI mode; synchronous serial clock input/output for I2C mode."+        "description": "PORTC bit 3 digital I/O, or MSSP synchronous serial clock input/output for SPI (SCK) or I2C (SCL)."       },       {         "number": "15",         "name": "RC4/SDI/SDA",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; SPI data input; I2C data I/O."+        "description": "PORTC bit 4 digital I/O, or MSSP SPI data input SDI, or I2C data I/O SDA."       },       {         "number": "16",         "name": "RC5/SDO",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; SPI data output."+        "description": "PORTC bit 5 digital I/O, or MSSP SPI data output SDO."       },       {         "number": "17",         "name": "RC6/TX/CK",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; EUSART asynchronous transmit (TX); EUSART synchronous clock (CK)."+        "description": "PORTC bit 6 digital I/O, or EUSART asynchronous transmit TX, or EUSART synchronous clock CK."       },       {         "number": "18",         "name": "RC7/RX/DT",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; EUSART asynchronous receive (RX); EUSART synchronous data (DT)."+        "description": "PORTC bit 7 digital I/O, or EUSART asynchronous receive RX, or EUSART synchronous data DT."       },       {         "number": "19",@@ -168,55 +167,55 @@         "number": "20",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply for logic and I/O pins; low-voltage (LF) devices such as PIC18LF2515 operate over an extended VDD range of 2.0V to 5.5V."+        "description": "Positive supply for logic and I/O pins."       },       {         "number": "21",         "name": "RB0/INT0/FLT0/AN12",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up when RBPU is cleared; external interrupt 0 (INT0); PWM Fault input for CCP1 (FLT0); analog input 12."+        "description": "PORTB bit 0 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT0, or PWM Fault input FLT0 for CCP1, or analog input 12."       },       {         "number": "22",         "name": "RB1/INT1/AN10",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up when RBPU is cleared; external interrupt 1 (INT1); analog input 10."+        "description": "PORTB bit 1 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT1, or analog input 10."       },       {         "number": "23",         "name": "RB2/INT2/AN8",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up when RBPU is cleared; external interrupt 2 (INT2); analog input 8."+        "description": "PORTB bit 2 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT2, or analog input 8."       },       {         "number": "24",         "name": "RB3/AN9/CCP2",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up when RBPU is cleared; analog input 9; CCP2 capture input or compare/PWM output when CCP2MX is cleared (alternate CCP2 pin)."+        "description": "PORTB bit 3 digital I/O with weak pull-up when RBPU is cleared, or analog input 9, or CCP2 capture input / compare and PWM output when CCP2MX is cleared."       },       {         "number": "25",         "name": "RB4/KBI0/AN11",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up when RBPU is cleared; interrupt-on-change pin (KBI0); analog input 11."+        "description": "PORTB bit 4 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI0, or analog input 11."       },       {         "number": "26",         "name": "RB5/KBI1/PGM",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up when RBPU is cleared; interrupt-on-change pin (KBI1); low-voltage ICSP programming enable pin (PGM)."+        "description": "PORTB bit 5 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI1, or Low-Voltage ICSP programming enable pin PGM."       },       {         "number": "27",         "name": "RB6/KBI2/PGC",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up when RBPU is cleared; interrupt-on-change pin (KBI2); in-circuit debugger and ICSP programming clock (PGC)."+        "description": "PORTB bit 6 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI2, or In-Circuit Debugger and ICSP programming clock PGC."       },       {         "number": "28",         "name": "RB7/KBI3/PGD",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up when RBPU is cleared; interrupt-on-change pin (KBI3); in-circuit debugger and ICSP programming data (PGD)."+        "description": "PORTB bit 7 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI3, or In-Circuit Debugger and ICSP programming data PGD."       }     ],     "provenance": {@@ -230,15 +229,15 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin 1 is shared as MCLR/VPP/RE3; whether it is MCLR or RE3 depends on the MCLRE Configuration bit, s; CCP2 is multiplexed between RC1 and RB3; the default assignment is set by the CCP2MX Configuration b; OSC1/CLKI/RA7 and OSC2/CLKO/RA6 change function with the oscillator Configuration bits (FOSC3:FOSC0)",+          "extractor flagged: Pin 1 is multi-function (MCLR/VPP/RE3); it was typed as input because MCLR is the primary function. ; Pins 9 and 10 are multi-function oscillator/I/O pins; they were typed by their oscillator function (; Table 1-3 lists the SPDIP and SOIC pin numbers together with the QFN numbers; this extraction uses t",           "1/28 pins cited to the wrong page (name found elsewhere): ['6:RA4/T0CKI/C1OUT@p14']"         ],         "pages_sent": 66,-        "cost_usd": 0.3501,-        "at": "2026-11-12T17:43:43"+        "cost_usd": 0.3473,+        "at": "2026-11-13T00:25:40"       },       "datasheet": {-        "url": "https://datasheet.lcsc.com/datasheet/pdf/d7007c6594ed68fa8c1843b538cd7ae0.pdf",+        "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/39636d.pdf",         "pages": 376,         "sha256": "58bdc0dc5321bdfe",         "source_tier": "mfr"@@ -272,7 +271,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -290,8 +289,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "13bd33cb8c0d001604b618946032b8b74c0687fdb973a88774a5dd8c7cb349cc",-        "checked": "2026-11-12",+        "sha256": "5a7cf396eb347754bbf09f7d50363ee170d3968b070185a9bef77b93707f3060",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -597,10 +596,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pic18lf2515-i-so-hero.glb",-    "pic18lf2515-i-so-hero.overlay.json",-    "pic18lf2515-i-so-etched.glb"+    "pic18lf2515-i-so-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
pic18lf2515-i-so.kicad_sym+2−2
@@ -40,11 +40,11 @@       (name "VSS" (effects (font (size 1.27 1.27))))       (number "8" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -30.48 -5.08 0) (length 5.08)+    (pin input line (at -30.48 -5.08 0) (length 5.08)       (name "OSC1/CLKI/RA7" (effects (font (size 1.27 1.27))))       (number "9" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -30.48 -7.62 0) (length 5.08)+    (pin output line (at -30.48 -7.62 0) (length 5.08)       (name "OSC2/CLKO/RA6" (effects (font (size 1.27 1.27))))       (number "10" (effects (font (size 1.27 1.27))))     )
pic18lf2515-i-so.lbr+16−5
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SOIC-28W_7.5x17.9mm_P1.27mm">   <description>SOIC-28W, 7.5 x 17.9 mm, 1.27 mm pitch. SOIC, 28 Pin</description>@@ -106,6 +106,7 @@ </packages> <symbols> <symbol name="PIC18LF2515-I">+  <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-25.4" y1="17.78" x2="25.4" y2="17.78" width="0.254" layer="94"/>   <wire x1="25.4" y1="17.78" x2="25.4" y2="-20.32" width="0.254" layer="94"/>   <wire x1="25.4" y1="-20.32" x2="-25.4" y2="-20.32" width="0.254" layer="94"/>@@ -120,8 +121,8 @@   <pin name="RA4/T0CKI/C1OUT" x="-30.48" y="2.54" length="middle" direction="io"/>   <pin name="RA5/AN4/SS/HLVDIN/C2OUT" x="-30.48" y="0" length="middle" direction="io"/>   <pin name="VSS" x="-30.48" y="-2.54" length="middle" direction="pwr"/>-  <pin name="OSC1/CLKI/RA7" x="-30.48" y="-5.08" length="middle" direction="io"/>-  <pin name="OSC2/CLKO/RA6" x="-30.48" y="-7.62" length="middle" direction="io"/>+  <pin name="OSC1/CLKI/RA7" x="-30.48" y="-5.08" length="middle" direction="in"/>+  <pin name="OSC2/CLKO/RA6" x="-30.48" y="-7.62" length="middle" direction="out"/>   <pin name="RC0/T1OSO/T13CKI" x="-30.48" y="-10.16" length="middle" direction="io"/>   <pin name="RC1/T1OSI/CCP2" x="-30.48" y="-12.7" length="middle" direction="io"/>   <pin name="RC2/CCP1" x="-30.48" y="-15.24" length="middle" direction="io"/>@@ -144,7 +145,7 @@ </symbols> <devicesets> <deviceset name="PIC18LF2515-I" prefix="U">-  <description></description>+  <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="PIC18LF2515-I" x="0" y="0"/>   </gates>@@ -180,7 +181,17 @@         <connect gate="G$1" pin="RC5/SDO" pad="16"/>         <connect gate="G$1" pin="RC4/SDI/SDA" pad="15"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="PIC18LF2515-I/SO" constant="no"/>+          <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>+          <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/d7007c6594ed68fa8c1843b538cd7ae0.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/pic18lf2515-i-so" constant="no"/>+          <attribute name="MOUSER_PN" value="579-PIC18LF2515-I/SO" constant="no"/>+          <attribute name="DIGIKEY_PN" value="PIC18LF2515-I/SO-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C646563" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>