← Commit history
Publish 0.1.2
4 files changed
+114−113
README.md+42−43@@ -8,34 +8,34 @@ PIC18LF2515-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descripti | Pin | Name | Type | Function | |---|---|---|---|-| 1 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input, also the programming voltage input VPP, or digital input RE3 when MCLR functionality is disabled. |-| 2 | RA0/AN0 | bidirectional | PORTA bit 0 digital I/O (TTL input), or analog input channel 0. |-| 3 | RA1/AN1 | bidirectional | PORTA bit 1 digital I/O (TTL input), or analog input channel 1. |-| 4 | RA2/AN2/VREF-/CVREF | bidirectional | PORTA bit 2 digital I/O, or analog input 2, A/D reference voltage (low) input, or comparator reference voltage output CVREF. |-| 5 | RA3/AN3/VREF+ | bidirectional | PORTA bit 3 digital I/O, or analog input 3, or A/D reference voltage (high) input VREF+. |-| 6 | RA4/T0CKI/C1OUT | bidirectional | PORTA bit 4 digital I/O (Schmitt Trigger input), or Timer0 external clock input T0CKI, or Comparator 1 output C1OUT. |-| 7 | RA5/AN4/SS/HLVDIN/C2OUT | bidirectional | PORTA bit 5 digital I/O, or analog input 4, or MSSP SPI slave select input SS, or High/Low-Voltage Detect input HLVDIN, or Comparator 2 output C2OUT. |+| 1 | MCLR/VPP/RE3 | input | Master Clear (Reset) input, an active-low Reset to the device; alternatively the programming voltage input (VPP) or digital input RE3 when the MCLRE Configuration bit is clear. |+| 2 | RA0/AN0 | bidirectional | Digital I/O (TTL input) with analog input channel 0 for the A/D and comparator C1- input. |+| 3 | RA1/AN1 | bidirectional | Digital I/O (TTL input) with analog input channel 1 for the A/D and comparator C2- input. |+| 4 | RA2/AN2/VREF-/CVREF | bidirectional | Digital I/O with analog input 2, A/D reference voltage (low) input VREF-, or comparator voltage reference output CVREF. |+| 5 | RA3/AN3/VREF+ | bidirectional | Digital I/O with analog input 3 or A/D reference voltage (high) input VREF+. |+| 6 | RA4/T0CKI/C1OUT | bidirectional | Digital I/O with Schmitt Trigger input, serving as Timer0 external clock input (T0CKI) or Comparator 1 output (C1OUT). |+| 7 | RA5/AN4/SS/HLVDIN/C2OUT | bidirectional | Digital I/O with analog input 4, SPI slave select input (SS), High/Low-Voltage Detect input (HLVDIN), or Comparator 2 output (C2OUT). | | 8 | VSS | power_in | Ground reference for logic and I/O pins. |-| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input (CLKI) in crystal/external modes; otherwise general purpose I/O RA7. |-| 10 | OSC2/CLKO/RA6 | output | Oscillator crystal output connecting to crystal or resonator, or CLKO (FOSC/4) output in RC modes; otherwise general purpose I/O RA6. |-| 11 | RC0/T1OSO/T13CKI | bidirectional | PORTC bit 0 digital I/O (Schmitt Trigger input), or Timer1 oscillator output T1OSO, or Timer1/Timer3 external clock input T13CKI. |-| 12 | RC1/T1OSI/CCP2 | bidirectional | PORTC bit 1 digital I/O, or Timer1 oscillator input T1OSI, or CCP2 capture input / compare output / PWM output. |-| 13 | RC2/CCP1 | bidirectional | PORTC bit 2 digital I/O, or CCP1 capture input / compare output / PWM output. |-| 14 | RC3/SCK/SCL | bidirectional | PORTC bit 3 digital I/O, or MSSP synchronous serial clock input/output for SPI (SCK) or I2C (SCL). |-| 15 | RC4/SDI/SDA | bidirectional | PORTC bit 4 digital I/O, or MSSP SPI data input SDI, or I2C data I/O SDA. |-| 16 | RC5/SDO | bidirectional | PORTC bit 5 digital I/O, or MSSP SPI data output SDO. |-| 17 | RC6/TX/CK | bidirectional | PORTC bit 6 digital I/O, or EUSART asynchronous transmit TX, or EUSART synchronous clock CK. |-| 18 | RC7/RX/DT | bidirectional | PORTC bit 7 digital I/O, or EUSART asynchronous receive RX, or EUSART synchronous data DT. |+| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input (OSC1/CLKI); in internal oscillator modes this pin is general purpose I/O RA7. |+| 10 | OSC2/CLKO/RA6 | output | Oscillator crystal output, or CLKO (FOSC/4) output in RC mode; in RCIO, INTIO2 and ECIO modes this pin is general purpose I/O RA6. |+| 11 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O with Schmitt Trigger input, serving as Timer1 oscillator output (T1OSO) or Timer1/Timer3 external clock input (T13CKI). |+| 12 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O with Timer1 oscillator input (T1OSI) or CCP2 capture input/compare and PWM output (default CCP2 assignment when CCP2MX is set). |+| 13 | RC2/CCP1 | bidirectional | Digital I/O with Capture 1 input, Compare 1 output or PWM 1 output (CCP1). |+| 14 | RC3/SCK/SCL | bidirectional | Digital I/O with synchronous serial clock input/output for SPI mode (SCK) or I2C mode (SCL). |+| 15 | RC4/SDI/SDA | bidirectional | Digital I/O with SPI data input (SDI) or I2C data I/O (SDA). |+| 16 | RC5/SDO | bidirectional | Digital I/O with SPI data output (SDO). |+| 17 | RC6/TX/CK | bidirectional | Digital I/O with EUSART asynchronous transmit (TX) or EUSART synchronous clock (CK). |+| 18 | RC7/RX/DT | bidirectional | Digital I/O with EUSART asynchronous receive (RX) or EUSART synchronous data (DT). | | 19 | VSS | power_in | Ground reference for logic and I/O pins. | | 20 | VDD | power_in | Positive supply for logic and I/O pins. |-| 21 | RB0/INT0/FLT0/AN12 | bidirectional | PORTB bit 0 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT0, or PWM Fault input FLT0 for CCP1, or analog input 12. |-| 22 | RB1/INT1/AN10 | bidirectional | PORTB bit 1 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT1, or analog input 10. |-| 23 | RB2/INT2/AN8 | bidirectional | PORTB bit 2 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT2, or analog input 8. |-| 24 | RB3/AN9/CCP2 | bidirectional | PORTB bit 3 digital I/O with weak pull-up when RBPU is cleared, or analog input 9, or CCP2 capture input / compare and PWM output when CCP2MX is cleared. |-| 25 | RB4/KBI0/AN11 | bidirectional | PORTB bit 4 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI0, or analog input 11. |-| 26 | RB5/KBI1/PGM | bidirectional | PORTB bit 5 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI1, or Low-Voltage ICSP programming enable pin PGM. |-| 27 | RB6/KBI2/PGC | bidirectional | PORTB bit 6 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI2, or In-Circuit Debugger and ICSP programming clock PGC. |-| 28 | RB7/KBI3/PGD | bidirectional | PORTB bit 7 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI3, or In-Circuit Debugger and ICSP programming data PGD. |+| 21 | RB0/INT0/FLT0/AN12 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared, external interrupt 0 (INT0), PWM Fault input for CCP1 (FLT0), or analog input 12. |+| 22 | RB1/INT1/AN10 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared, external interrupt 1 (INT1), or analog input 10. |+| 23 | RB2/INT2/AN8 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared, external interrupt 2 (INT2), or analog input 8. |+| 24 | RB3/AN9/CCP2 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared, analog input 9, or CCP2 capture input/compare and PWM output (alternate CCP2 assignment when CCP2MX is cleared). |+| 25 | RB4/KBI0/AN11 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI0, or analog input 11. |+| 26 | RB5/KBI1/PGM | bidirectional | Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI1, or low-voltage ICSP programming enable pin (PGM). |+| 27 | RB6/KBI2/PGC | bidirectional | Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI2, or ICSP/ICD programming clock pin (PGC). |+| 28 | RB7/KBI3/PGD | bidirectional | Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI3, or ICSP/ICD programming data pin (PGD). | ## Key specifications @@ -52,23 +52,22 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| VDD operating supply voltage (LF extended range) | VDD | 2 | | 5.5 | V | PIC18LF (LF) devices, extended VDD range | 8 |-| Operating temperature range (industrial) | TA | -40 | | 85 | °C | Industrial; Standard Operating Conditions | 328 |-| HLVD Voltage on VDD Transition High to Low (Param D420) | | 2.06 | 2.17 | 2.28 | V | LVV = 0000 | 328 |-| HLVD Voltage on VDD Transition High to Low (Param D420) | | 2.12 | 2.23 | 2.34 | V | LVV = 0001 | 328 |-| HLVD Voltage on VDD Transition High to Low (Param D420) | | 2.24 | 2.36 | 2.48 | V | LVV = 0010 | 328 |-| HLVD Voltage on VDD Transition High to Low (Param D420) | | 2.32 | 2.44 | 2.56 | V | LVV = 0011 | 328 |-| HLVD Voltage on VDD Transition High to Low (Param D420) | | 2.47 | 2.6 | 2.73 | V | LVV = 0100 | 328 |-| HLVD Voltage on VDD Transition High to Low (Param D420) | | 2.65 | 2.79 | 2.93 | V | LVV = 0101 | 328 |-| HLVD Voltage on VDD Transition High to Low (Param D420) | | 2.74 | 2.89 | 3.04 | V | LVV = 0110 | 328 |-| HLVD Voltage on VDD Transition High to Low (Param D420) | | 2.96 | 3.12 | 3.28 | V | LVV = 0111 | 328 |-| HLVD Voltage on VDD Transition High to Low (Param D420) | | 3.22 | 3.39 | 3.56 | V | LVV = 1000 | 328 |-| HLVD Voltage on VDD Transition High to Low (Param D420) | | 3.37 | 3.55 | 3.73 | V | LVV = 1001 | 328 |-| HLVD Voltage on VDD Transition High to Low (Param D420) | | 3.52 | 3.71 | 3.9 | V | LVV = 1010 | 328 |-| HLVD Voltage on VDD Transition High to Low (Param D420) | | 3.7 | 3.9 | 4.1 | V | LVV = 1011 | 328 |-| HLVD Voltage on VDD Transition High to Low (Param D420) | | 3.9 | 4.11 | 4.32 | V | LVV = 1100 | 328 |-| HLVD Voltage on VDD Transition High to Low (Param D420) | | 4.11 | 4.33 | 4.55 | V | LVV = 1101 | 328 |-| HLVD Voltage on VDD Transition High to Low (Param D420) | | 4.36 | 4.59 | 4.82 | V | LVV = 1110 | 328 |+| D420 HLVD Voltage on VDD Transition High to Low (LVV = 0000) | | 2.06 | 2.17 | 2.28 | V | LVV = 0000; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 |+| D420 HLVD Voltage on VDD Transition High to Low (LVV = 0001) | | 2.12 | 2.23 | 2.34 | V | LVV = 0001; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 |+| D420 HLVD Voltage on VDD Transition High to Low (LVV = 0010) | | 2.24 | 2.36 | 2.48 | V | LVV = 0010; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 |+| D420 HLVD Voltage on VDD Transition High to Low (LVV = 0011) | | 2.32 | 2.44 | 2.56 | V | LVV = 0011; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 |+| D420 HLVD Voltage on VDD Transition High to Low (LVV = 0100) | | 2.47 | 2.6 | 2.73 | V | LVV = 0100; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 |+| D420 HLVD Voltage on VDD Transition High to Low (LVV = 0101) | | 2.65 | 2.79 | 2.93 | V | LVV = 0101; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 |+| D420 HLVD Voltage on VDD Transition High to Low (LVV = 0110) | | 2.74 | 2.89 | 3.04 | V | LVV = 0110; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 |+| D420 HLVD Voltage on VDD Transition High to Low (LVV = 0111) | | 2.96 | 3.12 | 3.28 | V | LVV = 0111; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 |+| D420 HLVD Voltage on VDD Transition High to Low (LVV = 1000) | | 3.22 | 3.39 | 3.56 | V | LVV = 1000; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 |+| D420 HLVD Voltage on VDD Transition High to Low (LVV = 1001) | | 3.37 | 3.55 | 3.73 | V | LVV = 1001; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 |+| D420 HLVD Voltage on VDD Transition High to Low (LVV = 1010) | | 3.52 | 3.71 | 3.9 | V | LVV = 1010; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 |+| D420 HLVD Voltage on VDD Transition High to Low (LVV = 1011) | | 3.7 | 3.9 | 4.1 | V | LVV = 1011; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 |+| D420 HLVD Voltage on VDD Transition High to Low (LVV = 1100) | | 3.9 | 4.11 | 4.32 | V | LVV = 1100; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 |+| D420 HLVD Voltage on VDD Transition High to Low (LVV = 1101) | | 4.11 | 4.33 | 4.55 | V | LVV = 1101; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 |+| D420 HLVD Voltage on VDD Transition High to Low (LVV = 1110) | | 4.36 | 4.59 | 4.82 | V | LVV = 1110; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 |+| Operating VDD range, low-voltage (PIC18LF) devices | VDD | 2 | | 5.5 | V | PIC18LF (LF) low-voltage devices; stated in Section 1.3 text, not a table row | 8 | ## CAD (KiCad official) @@ -81,7 +80,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/39636d.pdf) (376 pp, sha256 `58bdc0dc5321bdfe`, retrieved 2026-11-13, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/39636d.pdf) (376 pp, sha256 `58bdc0dc5321bdfe`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
package.json+34−34@@ -1,6 +1,6 @@ { "slug": "pic18lf2515-i-so",- "version": "0.1.1",+ "version": "0.1.2", "type": "component", "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,7 +53,7 @@ "mouser": "579-PIC18LF2515-I/SO" }, "distributor_check": {- "checked_at": "2026-11-13T00:26:02Z",+ "checked_at": "2026-11-17T19:16:33Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "PIC18LF2515-I/SO-ND",@@ -70,43 +70,43 @@ "number": "1", "name": "MCLR/VPP/RE3", "type": "input",- "description": "Active-low Master Clear (Reset) input, also the programming voltage input VPP, or digital input RE3 when MCLR functionality is disabled."+ "description": "Master Clear (Reset) input, an active-low Reset to the device; alternatively the programming voltage input (VPP) or digital input RE3 when the MCLRE Configuration bit is clear." }, { "number": "2", "name": "RA0/AN0", "type": "bidirectional",- "description": "PORTA bit 0 digital I/O (TTL input), or analog input channel 0."+ "description": "Digital I/O (TTL input) with analog input channel 0 for the A/D and comparator C1- input." }, { "number": "3", "name": "RA1/AN1", "type": "bidirectional",- "description": "PORTA bit 1 digital I/O (TTL input), or analog input channel 1."+ "description": "Digital I/O (TTL input) with analog input channel 1 for the A/D and comparator C2- input." }, { "number": "4", "name": "RA2/AN2/VREF-/CVREF", "type": "bidirectional",- "description": "PORTA bit 2 digital I/O, or analog input 2, A/D reference voltage (low) input, or comparator reference voltage output CVREF."+ "description": "Digital I/O with analog input 2, A/D reference voltage (low) input VREF-, or comparator voltage reference output CVREF." }, { "number": "5", "name": "RA3/AN3/VREF+", "type": "bidirectional",- "description": "PORTA bit 3 digital I/O, or analog input 3, or A/D reference voltage (high) input VREF+."+ "description": "Digital I/O with analog input 3 or A/D reference voltage (high) input VREF+." }, { "number": "6", "name": "RA4/T0CKI/C1OUT", "type": "bidirectional",- "description": "PORTA bit 4 digital I/O (Schmitt Trigger input), or Timer0 external clock input T0CKI, or Comparator 1 output C1OUT."+ "description": "Digital I/O with Schmitt Trigger input, serving as Timer0 external clock input (T0CKI) or Comparator 1 output (C1OUT)." }, { "number": "7", "name": "RA5/AN4/SS/HLVDIN/C2OUT", "type": "bidirectional",- "description": "PORTA bit 5 digital I/O, or analog input 4, or MSSP SPI slave select input SS, or High/Low-Voltage Detect input HLVDIN, or Comparator 2 output C2OUT."+ "description": "Digital I/O with analog input 4, SPI slave select input (SS), High/Low-Voltage Detect input (HLVDIN), or Comparator 2 output (C2OUT)." }, { "number": "8",@@ -118,61 +118,61 @@ "number": "9", "name": "OSC1/CLKI/RA7", "type": "input",- "description": "Oscillator crystal or external clock input (CLKI) in crystal/external modes; otherwise general purpose I/O RA7."+ "description": "Oscillator crystal or external clock input (OSC1/CLKI); in internal oscillator modes this pin is general purpose I/O RA7." }, { "number": "10", "name": "OSC2/CLKO/RA6", "type": "output",- "description": "Oscillator crystal output connecting to crystal or resonator, or CLKO (FOSC/4) output in RC modes; otherwise general purpose I/O RA6."+ "description": "Oscillator crystal output, or CLKO (FOSC/4) output in RC mode; in RCIO, INTIO2 and ECIO modes this pin is general purpose I/O RA6." }, { "number": "11", "name": "RC0/T1OSO/T13CKI", "type": "bidirectional",- "description": "PORTC bit 0 digital I/O (Schmitt Trigger input), or Timer1 oscillator output T1OSO, or Timer1/Timer3 external clock input T13CKI."+ "description": "Digital I/O with Schmitt Trigger input, serving as Timer1 oscillator output (T1OSO) or Timer1/Timer3 external clock input (T13CKI)." }, { "number": "12", "name": "RC1/T1OSI/CCP2", "type": "bidirectional",- "description": "PORTC bit 1 digital I/O, or Timer1 oscillator input T1OSI, or CCP2 capture input / compare output / PWM output."+ "description": "Digital I/O with Timer1 oscillator input (T1OSI) or CCP2 capture input/compare and PWM output (default CCP2 assignment when CCP2MX is set)." }, { "number": "13", "name": "RC2/CCP1", "type": "bidirectional",- "description": "PORTC bit 2 digital I/O, or CCP1 capture input / compare output / PWM output."+ "description": "Digital I/O with Capture 1 input, Compare 1 output or PWM 1 output (CCP1)." }, { "number": "14", "name": "RC3/SCK/SCL", "type": "bidirectional",- "description": "PORTC bit 3 digital I/O, or MSSP synchronous serial clock input/output for SPI (SCK) or I2C (SCL)."+ "description": "Digital I/O with synchronous serial clock input/output for SPI mode (SCK) or I2C mode (SCL)." }, { "number": "15", "name": "RC4/SDI/SDA", "type": "bidirectional",- "description": "PORTC bit 4 digital I/O, or MSSP SPI data input SDI, or I2C data I/O SDA."+ "description": "Digital I/O with SPI data input (SDI) or I2C data I/O (SDA)." }, { "number": "16", "name": "RC5/SDO", "type": "bidirectional",- "description": "PORTC bit 5 digital I/O, or MSSP SPI data output SDO."+ "description": "Digital I/O with SPI data output (SDO)." }, { "number": "17", "name": "RC6/TX/CK", "type": "bidirectional",- "description": "PORTC bit 6 digital I/O, or EUSART asynchronous transmit TX, or EUSART synchronous clock CK."+ "description": "Digital I/O with EUSART asynchronous transmit (TX) or EUSART synchronous clock (CK)." }, { "number": "18", "name": "RC7/RX/DT", "type": "bidirectional",- "description": "PORTC bit 7 digital I/O, or EUSART asynchronous receive RX, or EUSART synchronous data DT."+ "description": "Digital I/O with EUSART asynchronous receive (RX) or EUSART synchronous data (DT)." }, { "number": "19",@@ -190,49 +190,49 @@ "number": "21", "name": "RB0/INT0/FLT0/AN12", "type": "bidirectional",- "description": "PORTB bit 0 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT0, or PWM Fault input FLT0 for CCP1, or analog input 12."+ "description": "Digital I/O with weak pull-up when RBPU is cleared, external interrupt 0 (INT0), PWM Fault input for CCP1 (FLT0), or analog input 12." }, { "number": "22", "name": "RB1/INT1/AN10", "type": "bidirectional",- "description": "PORTB bit 1 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT1, or analog input 10."+ "description": "Digital I/O with weak pull-up when RBPU is cleared, external interrupt 1 (INT1), or analog input 10." }, { "number": "23", "name": "RB2/INT2/AN8", "type": "bidirectional",- "description": "PORTB bit 2 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT2, or analog input 8."+ "description": "Digital I/O with weak pull-up when RBPU is cleared, external interrupt 2 (INT2), or analog input 8." }, { "number": "24", "name": "RB3/AN9/CCP2", "type": "bidirectional",- "description": "PORTB bit 3 digital I/O with weak pull-up when RBPU is cleared, or analog input 9, or CCP2 capture input / compare and PWM output when CCP2MX is cleared."+ "description": "Digital I/O with weak pull-up when RBPU is cleared, analog input 9, or CCP2 capture input/compare and PWM output (alternate CCP2 assignment when CCP2MX is cleared)." }, { "number": "25", "name": "RB4/KBI0/AN11", "type": "bidirectional",- "description": "PORTB bit 4 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI0, or analog input 11."+ "description": "Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI0, or analog input 11." }, { "number": "26", "name": "RB5/KBI1/PGM", "type": "bidirectional",- "description": "PORTB bit 5 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI1, or Low-Voltage ICSP programming enable pin PGM."+ "description": "Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI1, or low-voltage ICSP programming enable pin (PGM)." }, { "number": "27", "name": "RB6/KBI2/PGC", "type": "bidirectional",- "description": "PORTB bit 6 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI2, or In-Circuit Debugger and ICSP programming clock PGC."+ "description": "Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI2, or ICSP/ICD programming clock pin (PGC)." }, { "number": "28", "name": "RB7/KBI3/PGD", "type": "bidirectional",- "description": "PORTB bit 7 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI3, or In-Circuit Debugger and ICSP programming data PGD."+ "description": "Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI3, or ICSP/ICD programming data pin (PGD)." } ], "provenance": {@@ -246,12 +246,12 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Pin 1 is multi-function (MCLR/VPP/RE3); it was typed as input because MCLR is the primary function. ; Pins 9 and 10 are multi-function oscillator/I/O pins; they were typed by their oscillator function (; Table 1-3 lists the SPDIP and SOIC pin numbers together with the QFN numbers; this extraction uses t",+ "extractor flagged: OSC1/CLKI/RA7 and OSC2/CLKO/RA6 are multiplexed oscillator and I/O pins; typed here by their primary; MCLR/VPP/RE3 is multiplexed; typed as input (MCLR). The VPP function is listed as power input in Tab; Multi-function I/O pins are typed as bidirectional. Peripheral-only functions (e.g. analog inputs, C", "1/28 pins cited to the wrong page (name found elsewhere): ['6:RA4/T0CKI/C1OUT@p14']" ], "pages_sent": 66,- "cost_usd": 0.3473,- "at": "2026-11-13T00:25:40"+ "cost_usd": 0.3502,+ "at": "2026-11-17T19:15:46" }, "datasheet": { "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/39636d.pdf",@@ -288,7 +288,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",- "checked": "2026-11-13",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -306,13 +306,13 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "5a7cf396eb347754bbf09f7d50363ee170d3968b070185a9bef77b93707f3060",- "checked": "2026-11-13",+ "sha256": "770e0b723c3a0bd0e296eac1b48f97e6dcb54dd28b86951afcb73d444f82d859",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": {- "package_code": "SO",+ "package_code": "SOIC-28 (SO), Wide 7.50 mm Body", "source_page": 354, "D": { "nom_mm": 17.9,
page.json+37−35@@ -4,7 +4,7 @@ "slug": "pic18lf2515-i-so", "title": "PIC18LF2515-I/SO", "brief": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.1",+ "version": "0.1.2", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "579-PIC18LF2515-I/SO" }, "distributor_check": {- "checked_at": "2026-11-13T00:26:02Z",+ "checked_at": "2026-11-17T19:16:33Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "PIC18LF2515-I/SO-ND",@@ -53,43 +53,43 @@ "number": "1", "name": "MCLR/VPP/RE3", "type": "input",- "description": "Active-low Master Clear (Reset) input, also the programming voltage input VPP, or digital input RE3 when MCLR functionality is disabled."+ "description": "Master Clear (Reset) input, an active-low Reset to the device; alternatively the programming voltage input (VPP) or digital input RE3 when the MCLRE Configuration bit is clear." }, { "number": "2", "name": "RA0/AN0", "type": "bidirectional",- "description": "PORTA bit 0 digital I/O (TTL input), or analog input channel 0."+ "description": "Digital I/O (TTL input) with analog input channel 0 for the A/D and comparator C1- input." }, { "number": "3", "name": "RA1/AN1", "type": "bidirectional",- "description": "PORTA bit 1 digital I/O (TTL input), or analog input channel 1."+ "description": "Digital I/O (TTL input) with analog input channel 1 for the A/D and comparator C2- input." }, { "number": "4", "name": "RA2/AN2/VREF-/CVREF", "type": "bidirectional",- "description": "PORTA bit 2 digital I/O, or analog input 2, A/D reference voltage (low) input, or comparator reference voltage output CVREF."+ "description": "Digital I/O with analog input 2, A/D reference voltage (low) input VREF-, or comparator voltage reference output CVREF." }, { "number": "5", "name": "RA3/AN3/VREF+", "type": "bidirectional",- "description": "PORTA bit 3 digital I/O, or analog input 3, or A/D reference voltage (high) input VREF+."+ "description": "Digital I/O with analog input 3 or A/D reference voltage (high) input VREF+." }, { "number": "6", "name": "RA4/T0CKI/C1OUT", "type": "bidirectional",- "description": "PORTA bit 4 digital I/O (Schmitt Trigger input), or Timer0 external clock input T0CKI, or Comparator 1 output C1OUT."+ "description": "Digital I/O with Schmitt Trigger input, serving as Timer0 external clock input (T0CKI) or Comparator 1 output (C1OUT)." }, { "number": "7", "name": "RA5/AN4/SS/HLVDIN/C2OUT", "type": "bidirectional",- "description": "PORTA bit 5 digital I/O, or analog input 4, or MSSP SPI slave select input SS, or High/Low-Voltage Detect input HLVDIN, or Comparator 2 output C2OUT."+ "description": "Digital I/O with analog input 4, SPI slave select input (SS), High/Low-Voltage Detect input (HLVDIN), or Comparator 2 output (C2OUT)." }, { "number": "8",@@ -101,61 +101,61 @@ "number": "9", "name": "OSC1/CLKI/RA7", "type": "input",- "description": "Oscillator crystal or external clock input (CLKI) in crystal/external modes; otherwise general purpose I/O RA7."+ "description": "Oscillator crystal or external clock input (OSC1/CLKI); in internal oscillator modes this pin is general purpose I/O RA7." }, { "number": "10", "name": "OSC2/CLKO/RA6", "type": "output",- "description": "Oscillator crystal output connecting to crystal or resonator, or CLKO (FOSC/4) output in RC modes; otherwise general purpose I/O RA6."+ "description": "Oscillator crystal output, or CLKO (FOSC/4) output in RC mode; in RCIO, INTIO2 and ECIO modes this pin is general purpose I/O RA6." }, { "number": "11", "name": "RC0/T1OSO/T13CKI", "type": "bidirectional",- "description": "PORTC bit 0 digital I/O (Schmitt Trigger input), or Timer1 oscillator output T1OSO, or Timer1/Timer3 external clock input T13CKI."+ "description": "Digital I/O with Schmitt Trigger input, serving as Timer1 oscillator output (T1OSO) or Timer1/Timer3 external clock input (T13CKI)." }, { "number": "12", "name": "RC1/T1OSI/CCP2", "type": "bidirectional",- "description": "PORTC bit 1 digital I/O, or Timer1 oscillator input T1OSI, or CCP2 capture input / compare output / PWM output."+ "description": "Digital I/O with Timer1 oscillator input (T1OSI) or CCP2 capture input/compare and PWM output (default CCP2 assignment when CCP2MX is set)." }, { "number": "13", "name": "RC2/CCP1", "type": "bidirectional",- "description": "PORTC bit 2 digital I/O, or CCP1 capture input / compare output / PWM output."+ "description": "Digital I/O with Capture 1 input, Compare 1 output or PWM 1 output (CCP1)." }, { "number": "14", "name": "RC3/SCK/SCL", "type": "bidirectional",- "description": "PORTC bit 3 digital I/O, or MSSP synchronous serial clock input/output for SPI (SCK) or I2C (SCL)."+ "description": "Digital I/O with synchronous serial clock input/output for SPI mode (SCK) or I2C mode (SCL)." }, { "number": "15", "name": "RC4/SDI/SDA", "type": "bidirectional",- "description": "PORTC bit 4 digital I/O, or MSSP SPI data input SDI, or I2C data I/O SDA."+ "description": "Digital I/O with SPI data input (SDI) or I2C data I/O (SDA)." }, { "number": "16", "name": "RC5/SDO", "type": "bidirectional",- "description": "PORTC bit 5 digital I/O, or MSSP SPI data output SDO."+ "description": "Digital I/O with SPI data output (SDO)." }, { "number": "17", "name": "RC6/TX/CK", "type": "bidirectional",- "description": "PORTC bit 6 digital I/O, or EUSART asynchronous transmit TX, or EUSART synchronous clock CK."+ "description": "Digital I/O with EUSART asynchronous transmit (TX) or EUSART synchronous clock (CK)." }, { "number": "18", "name": "RC7/RX/DT", "type": "bidirectional",- "description": "PORTC bit 7 digital I/O, or EUSART asynchronous receive RX, or EUSART synchronous data DT."+ "description": "Digital I/O with EUSART asynchronous receive (RX) or EUSART synchronous data (DT)." }, { "number": "19",@@ -173,49 +173,49 @@ "number": "21", "name": "RB0/INT0/FLT0/AN12", "type": "bidirectional",- "description": "PORTB bit 0 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT0, or PWM Fault input FLT0 for CCP1, or analog input 12."+ "description": "Digital I/O with weak pull-up when RBPU is cleared, external interrupt 0 (INT0), PWM Fault input for CCP1 (FLT0), or analog input 12." }, { "number": "22", "name": "RB1/INT1/AN10", "type": "bidirectional",- "description": "PORTB bit 1 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT1, or analog input 10."+ "description": "Digital I/O with weak pull-up when RBPU is cleared, external interrupt 1 (INT1), or analog input 10." }, { "number": "23", "name": "RB2/INT2/AN8", "type": "bidirectional",- "description": "PORTB bit 2 digital I/O with weak pull-up when RBPU is cleared, or external interrupt INT2, or analog input 8."+ "description": "Digital I/O with weak pull-up when RBPU is cleared, external interrupt 2 (INT2), or analog input 8." }, { "number": "24", "name": "RB3/AN9/CCP2", "type": "bidirectional",- "description": "PORTB bit 3 digital I/O with weak pull-up when RBPU is cleared, or analog input 9, or CCP2 capture input / compare and PWM output when CCP2MX is cleared."+ "description": "Digital I/O with weak pull-up when RBPU is cleared, analog input 9, or CCP2 capture input/compare and PWM output (alternate CCP2 assignment when CCP2MX is cleared)." }, { "number": "25", "name": "RB4/KBI0/AN11", "type": "bidirectional",- "description": "PORTB bit 4 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI0, or analog input 11."+ "description": "Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI0, or analog input 11." }, { "number": "26", "name": "RB5/KBI1/PGM", "type": "bidirectional",- "description": "PORTB bit 5 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI1, or Low-Voltage ICSP programming enable pin PGM."+ "description": "Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI1, or low-voltage ICSP programming enable pin (PGM)." }, { "number": "27", "name": "RB6/KBI2/PGC", "type": "bidirectional",- "description": "PORTB bit 6 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI2, or In-Circuit Debugger and ICSP programming clock PGC."+ "description": "Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI2, or ICSP/ICD programming clock pin (PGC)." }, { "number": "28", "name": "RB7/KBI3/PGD", "type": "bidirectional",- "description": "PORTB bit 7 digital I/O with weak pull-up when RBPU is cleared, or interrupt-on-change KBI3, or In-Circuit Debugger and ICSP programming data PGD."+ "description": "Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI3, or ICSP/ICD programming data pin (PGD)." } ], "provenance": {@@ -229,12 +229,12 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Pin 1 is multi-function (MCLR/VPP/RE3); it was typed as input because MCLR is the primary function. ; Pins 9 and 10 are multi-function oscillator/I/O pins; they were typed by their oscillator function (; Table 1-3 lists the SPDIP and SOIC pin numbers together with the QFN numbers; this extraction uses t",+ "extractor flagged: OSC1/CLKI/RA7 and OSC2/CLKO/RA6 are multiplexed oscillator and I/O pins; typed here by their primary; MCLR/VPP/RE3 is multiplexed; typed as input (MCLR). The VPP function is listed as power input in Tab; Multi-function I/O pins are typed as bidirectional. Peripheral-only functions (e.g. analog inputs, C", "1/28 pins cited to the wrong page (name found elsewhere): ['6:RA4/T0CKI/C1OUT@p14']" ], "pages_sent": 66,- "cost_usd": 0.3473,- "at": "2026-11-13T00:25:40"+ "cost_usd": 0.3502,+ "at": "2026-11-17T19:15:46" }, "datasheet": { "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/39636d.pdf",@@ -271,7 +271,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",- "checked": "2026-11-13",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -289,13 +289,13 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "5a7cf396eb347754bbf09f7d50363ee170d3968b070185a9bef77b93707f3060",- "checked": "2026-11-13",+ "sha256": "770e0b723c3a0bd0e296eac1b48f97e6dcb54dd28b86951afcb73d444f82d859",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": {- "package_code": "SO",+ "package_code": "SOIC-28 (SO), Wide 7.50 mm Body", "source_page": 354, "D": { "nom_mm": 17.9,@@ -600,5 +600,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }
pic18lf2515-i-so.lbr+1−1@@ -185,7 +185,7 @@ <technology name=""> <attribute name="MPN" value="PIC18LF2515-I/SO" constant="no"/> <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>- <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/d7007c6594ed68fa8c1843b538cd7ae0.pdf" constant="no"/>+ <attribute name="DATASHEET" value="https://ww1.microchip.com/downloads/en/DeviceDoc/39636d.pdf" constant="no"/> <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/pic18lf2515-i-so" constant="no"/> <attribute name="MOUSER_PN" value="579-PIC18LF2515-I/SO" constant="no"/> <attribute name="DIGIKEY_PN" value="PIC18LF2515-I/SO-ND" constant="no"/>