main
Ray
Publish 0.1.0
b9c5590
PIC18LF24K22-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC18LF24K22-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/VPP/MCLR | input | RE3 is a digital input when MCLRE is 0, otherwise it is the active-low Master Clear (device Reset) input, and it also serves as the programming voltage input VPP. |
| 2 | RA0/C12IN0-/AN0 | bidirectional | RA0 is a TTL digital I/O that also serves as comparators C1 and C2 inverting input and analog input 0. |
| 3 | RA1/C12IN1-/AN1 | bidirectional | RA1 is a TTL digital I/O that also serves as comparators C1 and C2 inverting input and analog input 1. |
| 4 | RA2/C2IN+/AN2/DACOUT/VREF- | bidirectional | RA2 is a TTL digital I/O that also serves as comparator C2 noninverting input, analog input 2, DAC reference output and A/D reference voltage (low) input. |
| 5 | RA3/C1IN+/AN3/VREF+ | bidirectional | RA3 is a TTL digital I/O that also serves as comparator C1 noninverting input, analog input 3 and A/D reference voltage (high) input. |
| 6 | RA4/CCP5/C1OUT/SRQ/T0CKI | bidirectional | RA4 is a Schmitt Trigger digital I/O that also serves as Timer0 external clock input, comparator C1 output and SR latch Q output. |
| 7 | RA5/C2OUT/SRNQ/SS1/HLVDIN/AN4 | bidirectional | RA5 is a TTL digital I/O that also serves as comparator C2 output, SR latch Q output, SPI client select input (MSSP), high/low-voltage detect input and analog input 4. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | RA7/CLKI/OSC1 | bidirectional | RA7 is a TTL digital I/O that is multiplexed with the oscillator input OSC1 and external clock input CLKI. |
| 10 | RA6/CLKO/OSC2 | bidirectional | RA6 is a TTL digital I/O that is multiplexed with the oscillator output OSC2, which outputs CLKOUT at 1/4 the OSC1 frequency in RC mode. |
| 11 | RC0/P2B/T3CKI/T3G/T1CKI/SOSCO | bidirectional | RC0 is a Schmitt Trigger digital I/O that also serves as Timer3 clock input, Timer3 gate input, Timer1 clock input, enhanced CCP2 PWM output and secondary oscillator output. |
| 12 | RC1/P2A/CCP2/SOSCI | bidirectional | RC1 is a Schmitt Trigger digital I/O that also serves as CCP2 capture/compare/PWM, enhanced CCP2 PWM output and secondary oscillator input. |
| 13 | RC2/CTPLS/P1A/CCP1/T5CKI/AN14 | bidirectional | RC2 is a Schmitt Trigger digital I/O that also serves as CTMU pulse generator output, enhanced CCP1 PWM output, CCP1 capture/compare/PWM, Timer5 clock input and analog input 14. |
| 14 | RC3/SCK1/SCL1/AN15 | bidirectional | RC3 is a Schmitt Trigger digital I/O that also serves as MSSP1 SPI clock or I2C clock and analog input 15. |
| 15 | RC4/SDI1/SDA1/AN16 | bidirectional | RC4 is a Schmitt Trigger digital I/O that also serves as MSSP1 SPI data input or I2C data I/O and analog input 16. |
| 16 | RC5/SDO1/AN17 | bidirectional | RC5 is a Schmitt Trigger digital I/O that also serves as MSSP1 SPI data output and analog input 17. |
| 17 | RC6/P3A/CCP3/TX1/CK1/AN18 | bidirectional | RC6 is a Schmitt Trigger digital I/O that also serves as enhanced CCP3 PWM output, CCP3 capture/compare/PWM, EUSART asynchronous transmit or synchronous clock, and analog input 18. |
| 18 | RC7/P3B/RX1/DT1/AN19 | bidirectional | RC7 is a Schmitt Trigger digital I/O that also serves as enhanced CCP3 PWM output, EUSART asynchronous receive or synchronous data, and analog input 19. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT0/CCP4/FLT0/SRI/SS2/AN12 | bidirectional | RB0 is a TTL digital I/O that also serves as external interrupt 0, CCP4 capture/compare/PWM, ECCP auto-shutdown fault input, SR latch input, SPI client select input (MSSP2) and analog input 12. |
| 22 | RB1/INT1/P1C/SCK2/SCL2/C12IN3-/AN10 | bidirectional | RB1 is a TTL digital I/O that also serves as external interrupt 1, enhanced CCP1 PWM output, MSSP2 SPI or I2C clock, comparator inverting input and analog input 10. |
| 23 | RB2/INT2/CTED1/P1B/SDI2/SDA2/AN8 | bidirectional | RB2 is a TTL digital I/O that also serves as external interrupt 2, CTMU Edge 1 input, enhanced CCP1 PWM output, MSSP2 SPI data input or I2C data I/O, and analog input 8. |
| 24 | RB3/CTED2/P2A/CCP2/SDO2/C12IN2-/AN9 | bidirectional | RB3 is a TTL digital I/O that also serves as CTMU Edge 2 input, enhanced CCP2 PWM output, CCP2 capture/compare/PWM, MSSP2 SPI data output, comparator inverting input and analog input 9. |
| 25 | RB4/IOC0/P1D/T5G/AN11 | bidirectional | RB4 is a TTL digital I/O that also serves as interrupt-on-change pin, enhanced CCP1 PWM output, Timer5 gate input and analog input 11. |
| 26 | RB5/IOC1/P2B/P3A/CCP3/T3CKI/T1G/AN13 | bidirectional | RB5 is a TTL digital I/O that also serves as interrupt-on-change pin, enhanced CCP2 and CCP3 PWM outputs, CCP3 capture/compare/PWM, Timer3 clock input, Timer1 gate input and analog input 13. |
| 27 | RB6/IOC2/TX2/CK2/PGC | bidirectional | RB6 is a TTL digital I/O that also serves as interrupt-on-change pin, EUSART2 asynchronous transmit or synchronous clock, and the in-circuit debugger and ICSP programming clock pin. |
| 28 | RB7/IOC3/RX2/DT2/PGD | bidirectional | RB7 is a TTL digital I/O that also serves as interrupt-on-change pin, EUSART2 asynchronous receive or synchronous data, and the in-circuit debugger and ICSP programming data pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
CAD (KiCad official)
- Symbol:
PIC18LF24K22-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic18lf24k22-i-etched.step/pic18lf24k22-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18lf24k22-i.step/pic18lf24k22-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (539 pp, sha256
d0ba745eb6a13bdb, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC18LF24K22-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC18LF24K22-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/VPP/MCLR | input | RE3 is a digital input when MCLRE is 0, otherwise it is the active-low Master Clear (device Reset) input, and it also serves as the programming voltage input VPP. |
| 2 | RA0/C12IN0-/AN0 | bidirectional | RA0 is a TTL digital I/O that also serves as comparators C1 and C2 inverting input and analog input 0. |
| 3 | RA1/C12IN1-/AN1 | bidirectional | RA1 is a TTL digital I/O that also serves as comparators C1 and C2 inverting input and analog input 1. |
| 4 | RA2/C2IN+/AN2/DACOUT/VREF- | bidirectional | RA2 is a TTL digital I/O that also serves as comparator C2 noninverting input, analog input 2, DAC reference output and A/D reference voltage (low) input. |
| 5 | RA3/C1IN+/AN3/VREF+ | bidirectional | RA3 is a TTL digital I/O that also serves as comparator C1 noninverting input, analog input 3 and A/D reference voltage (high) input. |
| 6 | RA4/CCP5/C1OUT/SRQ/T0CKI | bidirectional | RA4 is a Schmitt Trigger digital I/O that also serves as Timer0 external clock input, comparator C1 output and SR latch Q output. |
| 7 | RA5/C2OUT/SRNQ/SS1/HLVDIN/AN4 | bidirectional | RA5 is a TTL digital I/O that also serves as comparator C2 output, SR latch Q output, SPI client select input (MSSP), high/low-voltage detect input and analog input 4. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | RA7/CLKI/OSC1 | bidirectional | RA7 is a TTL digital I/O that is multiplexed with the oscillator input OSC1 and external clock input CLKI. |
| 10 | RA6/CLKO/OSC2 | bidirectional | RA6 is a TTL digital I/O that is multiplexed with the oscillator output OSC2, which outputs CLKOUT at 1/4 the OSC1 frequency in RC mode. |
| 11 | RC0/P2B/T3CKI/T3G/T1CKI/SOSCO | bidirectional | RC0 is a Schmitt Trigger digital I/O that also serves as Timer3 clock input, Timer3 gate input, Timer1 clock input, enhanced CCP2 PWM output and secondary oscillator output. |
| 12 | RC1/P2A/CCP2/SOSCI | bidirectional | RC1 is a Schmitt Trigger digital I/O that also serves as CCP2 capture/compare/PWM, enhanced CCP2 PWM output and secondary oscillator input. |
| 13 | RC2/CTPLS/P1A/CCP1/T5CKI/AN14 | bidirectional | RC2 is a Schmitt Trigger digital I/O that also serves as CTMU pulse generator output, enhanced CCP1 PWM output, CCP1 capture/compare/PWM, Timer5 clock input and analog input 14. |
| 14 | RC3/SCK1/SCL1/AN15 | bidirectional | RC3 is a Schmitt Trigger digital I/O that also serves as MSSP1 SPI clock or I2C clock and analog input 15. |
| 15 | RC4/SDI1/SDA1/AN16 | bidirectional | RC4 is a Schmitt Trigger digital I/O that also serves as MSSP1 SPI data input or I2C data I/O and analog input 16. |
| 16 | RC5/SDO1/AN17 | bidirectional | RC5 is a Schmitt Trigger digital I/O that also serves as MSSP1 SPI data output and analog input 17. |
| 17 | RC6/P3A/CCP3/TX1/CK1/AN18 | bidirectional | RC6 is a Schmitt Trigger digital I/O that also serves as enhanced CCP3 PWM output, CCP3 capture/compare/PWM, EUSART asynchronous transmit or synchronous clock, and analog input 18. |
| 18 | RC7/P3B/RX1/DT1/AN19 | bidirectional | RC7 is a Schmitt Trigger digital I/O that also serves as enhanced CCP3 PWM output, EUSART asynchronous receive or synchronous data, and analog input 19. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT0/CCP4/FLT0/SRI/SS2/AN12 | bidirectional | RB0 is a TTL digital I/O that also serves as external interrupt 0, CCP4 capture/compare/PWM, ECCP auto-shutdown fault input, SR latch input, SPI client select input (MSSP2) and analog input 12. |
| 22 | RB1/INT1/P1C/SCK2/SCL2/C12IN3-/AN10 | bidirectional | RB1 is a TTL digital I/O that also serves as external interrupt 1, enhanced CCP1 PWM output, MSSP2 SPI or I2C clock, comparator inverting input and analog input 10. |
| 23 | RB2/INT2/CTED1/P1B/SDI2/SDA2/AN8 | bidirectional | RB2 is a TTL digital I/O that also serves as external interrupt 2, CTMU Edge 1 input, enhanced CCP1 PWM output, MSSP2 SPI data input or I2C data I/O, and analog input 8. |
| 24 | RB3/CTED2/P2A/CCP2/SDO2/C12IN2-/AN9 | bidirectional | RB3 is a TTL digital I/O that also serves as CTMU Edge 2 input, enhanced CCP2 PWM output, CCP2 capture/compare/PWM, MSSP2 SPI data output, comparator inverting input and analog input 9. |
| 25 | RB4/IOC0/P1D/T5G/AN11 | bidirectional | RB4 is a TTL digital I/O that also serves as interrupt-on-change pin, enhanced CCP1 PWM output, Timer5 gate input and analog input 11. |
| 26 | RB5/IOC1/P2B/P3A/CCP3/T3CKI/T1G/AN13 | bidirectional | RB5 is a TTL digital I/O that also serves as interrupt-on-change pin, enhanced CCP2 and CCP3 PWM outputs, CCP3 capture/compare/PWM, Timer3 clock input, Timer1 gate input and analog input 13. |
| 27 | RB6/IOC2/TX2/CK2/PGC | bidirectional | RB6 is a TTL digital I/O that also serves as interrupt-on-change pin, EUSART2 asynchronous transmit or synchronous clock, and the in-circuit debugger and ICSP programming clock pin. |
| 28 | RB7/IOC3/RX2/DT2/PGD | bidirectional | RB7 is a TTL digital I/O that also serves as interrupt-on-change pin, EUSART2 asynchronous receive or synchronous data, and the in-circuit debugger and ICSP programming data pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
## CAD (KiCad official)
- Symbol: `PIC18LF24K22-I`
- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`
- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files: `pic18lf24k22-i-etched.step` / `pic18lf24k22-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic18lf24k22-i.step` / `pic18lf24k22-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic18lf24k22-i-datasheet.pdf) (539 pp, sha256 `d0ba745eb6a13bdb`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic18lf24k22-i-datasheet.pdf)