Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18LF2320-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC18LF2320-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP | input | Active-low Master Clear (Reset) input to the device, which also serves as the programming voltage input (VPP). |
| 2 | RA0/AN0 | bidirectional | Digital I/O with TTL input buffer that can also serve as analog input 0. |
| 3 | RA1/AN1 | bidirectional | Digital I/O with TTL input buffer that can also serve as analog input 1. |
| 4 | RA2/AN2/VREF-/CVREF | bidirectional | Digital I/O that can also serve as analog input 2, the A/D reference voltage (low) input, or the comparator reference voltage output. |
| 5 | RA3/AN3/VREF+ | bidirectional | Digital I/O that can also serve as analog input 3 or the A/D reference voltage (high) input. |
| 6 | RA4/T0CKI/C1OUT | bidirectional | Digital I/O (Schmitt Trigger input, open-drain when configured as output) that can also serve as the Timer0 external clock input or the Comparator 1 output. |
| 7 | RA5/AN4/SS/LVDIN/C2OUT | bidirectional | Digital I/O that can also serve as analog input 4, the SPI slave select input, the Low-Voltage Detect input, or the Comparator 2 output. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input (ST buffer in RC mode, CMOS otherwise), and can alternatively be general-purpose I/O RA7 in INTIO modes. |
| 10 | OSC2/CLKO/RA6 | output | Oscillator crystal output, or CLKO at 1/4 the OSC1 frequency in RC mode, and can alternatively be general-purpose I/O RA6 (TTL). |
| 11 | RC0/T1OSO/T1CKI | bidirectional | Digital I/O (Schmitt Trigger input) that can also serve as the Timer1 oscillator output or the Timer1/Timer3 external clock input. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O that can also serve as the Timer1 oscillator input or the CCP2 capture input, compare output, or PWM2 output. |
| 13 | RC2/CCP1/P1A | bidirectional | Digital I/O that can also serve as the CCP1 capture input, compare output, or PWM1 output, or the enhanced CCP1 output P1A. |
| 14 | RC3/SCK/SCL | bidirectional | Digital I/O that can also serve as the synchronous serial clock input/output for SPI mode or for I2C mode (SCL). |
| 15 | RC4/SDI/SDA | bidirectional | Digital I/O that can also serve as the SPI data input or the I2C data I/O (SDA). |
| 16 | RC5/SDO | bidirectional | Digital I/O that can also serve as the SPI data output. |
| 17 | RC6/TX/CK | bidirectional | Digital I/O that can also serve as the USART asynchronous transmit output or the USART synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | Digital I/O that can also serve as the USART asynchronous receive input or the USART synchronous data. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/AN12/INT0 | bidirectional | Digital I/O with TTL input buffer and programmable weak pull-up that can also serve as analog input 12 or external interrupt 0 (ST input). |
| 22 | RB1/AN10/INT1 | bidirectional | Digital I/O with TTL input buffer and programmable weak pull-up that can also serve as analog input 10 or external interrupt 1 (ST input). |
| 23 | RB2/AN8/INT2 | bidirectional | Digital I/O with TTL input buffer and programmable weak pull-up that can also serve as analog input 8 or external interrupt 2 (ST input). |
| 24 | RB3/AN9/CCP2 | bidirectional | Digital I/O with TTL input buffer and programmable weak pull-up that can also serve as analog input 9 or the CCP2 capture input, compare output, or PWM2 output. |
| 25 | RB4/AN11/KBI0 | bidirectional | Digital I/O with TTL input buffer and programmable weak pull-up that can also serve as analog input 11 or an interrupt-on-change pin. |
| 26 | RB5/KBI1/PGM | bidirectional | Digital I/O with TTL input buffer and programmable weak pull-up that can also serve as an interrupt-on-change pin or the low-voltage ICSP programming enable pin. |
| 27 | RB6/KBI2/PGC | bidirectional | Digital I/O with TTL input buffer and programmable weak pull-up that can also serve as an interrupt-on-change pin or the In-Circuit Debugger and ICSP programming clock pin. |
| 28 | RB7/KBI3/PGD | bidirectional | Digital I/O with TTL input buffer and programmable weak pull-up that can also serve as an interrupt-on-change pin or the In-Circuit Debugger and ICSP programming data pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature (industrial) | TA | -40 | 85 | °C | Industrial | 310 | |
| VDD Supply Voltage | VDD | 2 | 5.5 | V | HS, XT, RC and LP Osc mode | 310 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | 310 | |||
| VDD Start Voltage to ensure internal Power-on Reset signal | VPOR | 0.7 | V | 310 | |||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | 310 | |||
| Brown-out Reset Voltage (BORV1:BORV0 = 10) | VBOR | 2.45 | 2.72 | 2.99 | V | BORV1:BORV0 = 10; date codes 0351xxx to 0417xxx | 310 |
| Brown-out Reset Voltage (BORV1:BORV0 = 01) | VBOR | 3.8 | 4.22 | 4.64 | V | BORV1:BORV0 = 01; date codes 0351xxx to 0417xxx | 310 |
| Brown-out Reset Voltage (BORV1:BORV0 = 00) | VBOR | 4.09 | 4.54 | 4.99 | V | BORV1:BORV0 = 00; date codes 0351xxx to 0417xxx | 310 |
| Brown-out Reset Voltage (BORV1:BORV0 = 10) | VBOR | 2.5 | 2.72 | 2.94 | V | BORV1:BORV0 = 10; date codes above 0417xxx; -10°C to +85°C | 311 |
| Brown-out Reset Voltage (BORV1:BORV0 = 01) | VBOR | 3.88 | 4.22 | 4.56 | V | BORV1:BORV0 = 01; date codes above 0417xxx; -10°C to +85°C | 311 |
| Brown-out Reset Voltage (BORV1:BORV0 = 00) | VBOR | 4.18 | 4.54 | 4.9 | V | BORV1:BORV0 = 00; date codes above 0417xxx; -10°C to +85°C | 311 |
| Brown-out Reset Voltage (BORV1:BORV0 = 10) | VBOR | 2.34 | 2.72 | 3.1 | V | BORV1:BORV0 = 10; date codes above 0417xxx; -40°C to -10°C | 311 |
| Brown-out Reset Voltage (BORV1:BORV0 = 01) | VBOR | 3.63 | 4.22 | 4.81 | V | BORV1:BORV0 = 01; date codes above 0417xxx; -40°C to -10°C | 311 |
| Brown-out Reset Voltage (BORV1:BORV0 = 00) | VBOR | 3.9 | 4.54 | 5.18 | V | BORV1:BORV0 = 00; date codes above 0417xxx; -40°C to -10°C | 311 |
| Power-down Current (Sleep mode), VDD = 2.0 V, -40°C | IPD | 0.1 | 0.5 | μA | VDD = 2.0V; Sleep mode; -40°C | 312 | |
| Power-down Current (Sleep mode), VDD = 2.0 V, +25°C | IPD | 0.1 | 0.5 | μA | VDD = 2.0V; Sleep mode; +25°C | 312 | |
| Power-down Current (Sleep mode), VDD = 2.0 V, +85°C | IPD | 0.2 | 1.7 | μA | VDD = 2.0V; Sleep mode; +85°C | 312 | |
| Power-down Current (Sleep mode), VDD = 3.0 V, -40°C | IPD | 0.1 | 0.5 | μA | VDD = 3.0V; Sleep mode; -40°C | 312 | |
| Power-down Current (Sleep mode), VDD = 3.0 V, +25°C | IPD | 0.1 | 0.5 | μA | VDD = 3.0V; Sleep mode; +25°C | 312 | |
| Power-down Current (Sleep mode), VDD = 3.0 V, +85°C | IPD | 0.3 | 1.7 | μA | VDD = 3.0V; Sleep mode; +85°C | 312 | |
| Power-down Current (Sleep mode), VDD = 5.0 V, -40°C | IPD | 0.1 | 2 | μA | VDD = 5.0V; Sleep mode; -40°C | 312 | |
| Power-down Current (Sleep mode), VDD = 5.0 V, +25°C | IPD | 0.1 | 2 | μA | VDD = 5.0V; Sleep mode; +25°C | 312 | |
| Power-down Current (Sleep mode), VDD = 5.0 V, +85°C | IPD | 0.4 | 6.5 | μA | VDD = 5.0V; Sleep mode; +85°C | 312 | |
| Supply Current (PRI_RUN, EC), VDD = 2.0 V, -40°C | IDD | 440 | 600 | μA | VDD = 2.0V; FOSC = 4 MHz; PRI_RUN, EC oscillator; -40°C | 316 | |
| Supply Current (PRI_RUN, EC), VDD = 2.0 V, +25°C | IDD | 450 | 600 | μA | VDD = 2.0V; FOSC = 4 MHz; PRI_RUN, EC oscillator; +25°C | 316 | |
| Supply Current (PRI_RUN, EC), VDD = 2.0 V, +85°C | IDD | 460 | 600 | μA | VDD = 2.0V; FOSC = 4 MHz; PRI_RUN, EC oscillator; +85°C | 316 | |
| Supply Current (PRI_RUN, EC), VDD = 3.0 V, -40°C | IDD | 0.8 | 1 | mA | VDD = 3.0V; FOSC = 4 MHz; PRI_RUN, EC oscillator; -40°C | 316 | |
| Supply Current (PRI_RUN, EC), VDD = 3.0 V, +25°C | IDD | 0.78 | 1 | mA | VDD = 3.0V; FOSC = 4 MHz; PRI_RUN, EC oscillator; +25°C | 316 | |
| Supply Current (PRI_RUN, EC), VDD = 3.0 V, +85°C | IDD | 0.77 | 1 | mA | VDD = 3.0V; FOSC = 4 MHz; PRI_RUN, EC oscillator; +85°C | 316 | |
| Supply Current (PRI_RUN, EC), VDD = 5.0 V, -40°C | IDD | 1.6 | 2 | mA | VDD = 5.0V; FOSC = 4 MHz; PRI_RUN, EC oscillator; -40°C | 316 | |
| Supply Current (PRI_RUN, EC), VDD = 5.0 V, +25°C | IDD | 1.5 | 2 | mA | VDD = 5.0V; FOSC = 4 MHz; PRI_RUN, EC oscillator; +25°C | 316 | |
| Supply Current (PRI_RUN, EC), VDD = 5.0 V, +85°C | IDD | 1.5 | 2 | mA | VDD = 5.0V; FOSC = 4 MHz; PRI_RUN, EC oscillator; +85°C | 316 | |
| Input Low Voltage, I/O ports (TTL/Schmitt, 4.5 V ≤ VDD ≤ 5.5 V) | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 321 | ||
| Input High Voltage, I/O ports with TTL buffer (4.5 V ≤ VDD ≤ 5.5 V) | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 321 | ||
| Input High Voltage, OSC1 and T1OSI | VIH | 1.6 | V | LP, XT, HS, HSPLL modes | 321 | ||
| Input Leakage Current, I/O ports | IIL | -0.2 | 0.2 | μA | VSS ≤ VPIN ≤ VDD, pin at high-impedance | 321 | |
| Input Leakage Current, MCLR, RA4 | IIL | -1 | 1 | μA | Vss ≤ VPIN ≤ VDD | 321 | |
| Input Leakage Current, OSC1 | IIL | -1 | 1 | μA | Vss ≤ VPIN ≤ VDD | 321 | |
| PORTB Weak Pull-up Current | IPURB | 50 | 400 | μA | VDD = 5V, VPIN = VSS | 321 | |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C | 322 | ||
| Output Low Voltage, OSC2/CLKO (RC mode) | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +85°C | 322 | ||
| Open-Drain High Voltage, RA4 pin | VOD | 8.5 | V | RA4 pin | 322 | ||
| OSC2 Pin Capacitive Loading | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 322 | ||
| All I/O Pins and OSC2 (RC mode) Capacitive Loading | CIO | 50 | pF | To meet the AC Timing Specifications | 322 | ||
| SCL, SDA Capacitive Loading | CB | 400 | pF | In I2C mode | 322 | ||
| INTOSC Accuracy, PIC18LF (+25°C) | INTOSC | -2 | 2 | % | +25°C, VDD = 2.7-3.3V; frequency calibrated at 25°C | 331 | |
| INTOSC Accuracy, PIC18LF (-10°C to +85°C) | INTOSC | -5 | 5 | % | -10°C to +85°C, VDD = 2.7-3.3V | 331 | |
| INTOSC Accuracy, PIC18LF (-40°C to +85°C) | INTOSC | -10 | 10 | % | -40°C to +85°C, VDD = 2.7-3.3V | 331 | |
| INTRC Accuracy @ 31 kHz, PIC18LF | 26.562 | 35.938 | kHz | -40°C to +85°C, VDD = 2.7-3.3V | 331 | ||
| A/D Current from VDD, PIC18LF | IAD | 90 | μA | Average current during conversion; PIC18LFXX20 | 347 |
CAD (KiCad official)
- Symbol:
PIC18LF2320-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic18lf2320-i-etched.step/pic18lf2320-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18lf2320-i.step/pic18lf2320-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (394 pp, sha256
9c1ac85d0b2048d6, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).