Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18LF13K22-I/SS
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-20-208mil
PIC18LF13K22-I from Microchip Tech, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply for logic and I/O pins; Table 1-1 gives 1.8V-3.6V for the PIC18LF13K22 (2.3V-5.5V for PIC18F13K22). |
| 2 | RA5/OSC1/CLKIN/T13CKI | bidirectional | Digital I/O (TTL input, programmable weak pull-up) multiplexed with the oscillator crystal or external clock input OSC1/CLKIN and the Timer1/Timer3 external clock input T13CKI. |
| 3 | RA4/AN3/OSC2/CLKOUT | bidirectional | Digital I/O (TTL input, programmable weak pull-up) multiplexed with ADC channel 3, the crystal oscillator output OSC2 in crystal modes, or CLKOUT (FOSC/4) in RC mode. |
| 4 | RA3/MCLR/VPP | input | Input-only pin that serves as RA3 only when MCLR is disabled, or as the active-low Master Clear MCLR with internal pull-up, or as the high-voltage programming input VPP. |
| 5 | RC5/CCP1/P1A | bidirectional | Digital I/O (Schmitt Trigger input) multiplexed with ECCP1 capture input or compare/PWM output CCP1 and the enhanced PWM output P1A. |
| 6 | RC4/C2OUT/P1B/SRNQ | bidirectional | Digital I/O (Schmitt Trigger input) multiplexed with the Comparator C2 output C2OUT, the enhanced PWM output P1B and the SR latch inverted output SRNQ. |
| 7 | RC3/AN7/C12IN3-/P1C/PGM | bidirectional | Digital I/O (Schmitt Trigger input) multiplexed with ADC channel 7, Comparator C1/C2 inverting input channel 3, enhanced PWM output P1C and low-voltage ICSP programming enable PGM. |
| 8 | RC6/AN8/SS | bidirectional | Digital I/O (Schmitt Trigger input) multiplexed with ADC channel 8 and the SPI slave select input SS (TTL input). |
| 9 | RC7/AN9/SDO | bidirectional | Digital I/O (Schmitt Trigger input) multiplexed with ADC channel 9 and the SPI data output SDO. |
| 10 | RB7/TX/CK | bidirectional | Digital I/O (TTL input, programmable weak pull-up) multiplexed with the EUSART asynchronous transmit output TX and the synchronous clock CK. |
| 11 | RB6/SCK/SCL | bidirectional | Digital I/O (TTL input, programmable weak pull-up) multiplexed with the SPI clock SCK and the I2C clock SCL. |
| 12 | RB5/AN11/RX/DT | bidirectional | Digital I/O (TTL input, programmable weak pull-up) multiplexed with ADC channel 11, the EUSART asynchronous receive RX and the synchronous data DT. |
| 13 | RB4/AN10/SDI/SDA | bidirectional | Digital I/O (TTL input, programmable weak pull-up) multiplexed with ADC channel 10, the SPI data input SDI and the I2C data SDA. |
| 14 | RC2/AN6/C12IN2-/P1D | bidirectional | Digital I/O (Schmitt Trigger input) multiplexed with ADC channel 6, Comparator C1/C2 inverting input channel 2 and the enhanced PWM output P1D. |
| 15 | RC1/AN5/C12IN1- | bidirectional | Digital I/O (Schmitt Trigger input) multiplexed with ADC channel 5 and Comparator C1/C2 inverting input channel 1. |
| 16 | RC0/AN4/C2IN+ | bidirectional | Digital I/O (Schmitt Trigger input) multiplexed with ADC channel 4 and the Comparator C2 noninverting input C2IN+. |
| 17 | RA2/AN2/C1OUT/T0CKI/INT2/SRQ | bidirectional | Digital I/O (TTL input, programmable weak pull-up) multiplexed with ADC channel 2, Comparator C1 output C1OUT, Timer0 external clock T0CKI, external interrupt INT2 and the SR latch output SRQ. |
| 18 | RA1/AN1/C12IN0-/VREF+/INT1/PGC | bidirectional | Digital I/O (TTL input, programmable weak pull-up) multiplexed with ADC channel 1, Comparator C1/C2 inverting input channel 0, the ADC/DAC high reference input VREF+, external interrupt INT1 and the ICSP programming clock PGC. |
| 19 | RA0/AN0/CVREF/VREF-/C1IN+/INT0/PGD | bidirectional | Digital I/O (TTL input, programmable weak pull-up) multiplexed with ADC channel 0, the DAC reference voltage output CVREF/DAC1OUT, the ADC/DAC low reference input VREF-, Comparator C1 noninverting input C1IN+, external interrupt INT0 and the ICSP programming data PGD. |
| 20 | VSS | power_in | Ground reference for logic and I/O pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-20-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 319 | |||
| Storage temperature | -65 | 150 | °C | 319 | |||
| Voltage on VDD pin with respect to VSS (PIC18LF1XK22) | VDD | -0.3 | 4 | V | PIC18LF1XK22 | 319 | |
| Voltage on MCLR pin with respect to VSS | -0.3 | 9 | V | 319 | |||
| Voltage on all other pins with respect to VSS | -0.3 | V | maximum printed as (VDD + 0.3V) | 319 | |||
| Maximum current on VSS pin | 250 | mA | -40°C ≤ TA ≤ +85°C, Industrial | 319 | |||
| Maximum current on VDD pin | 250 | mA | -40°C ≤ TA ≤ +85°C, Industrial | 319 | |||
| Maximum current sunk by all ports | 250 | mA | 319 | ||||
| Maximum current sourced by all ports | 250 | mA | 319 | ||||
| Maximum output current sunk by any I/O pin | 50 | mA | 319 | ||||
| Maximum output current sourced by any I/O pin | 50 | mA | 319 | ||||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 319 | ||
| VDD operating supply voltage (PIC18LF1XK22) | VDDMIN | 1.8 | V | Fosc ≤ 16 MHz | 320 | ||
| VDD operating supply voltage (PIC18LF1XK22) | VDDMIN | 2 | V | Fosc ≤ 20 MHz | 320 | ||
| VDD operating supply voltage (PIC18LF1XK22) | VDDMIN | 3 | V | Fosc ≤ 64 MHz | 320 | ||
| VDD operating supply voltage maximum (PIC18LF1XK22) | VDDMAX | 3.6 | V | PIC18LF1XK22 | 320 | ||
| Operating ambient temperature range, industrial | TA | -40 | 85 | °C | Industrial temperature | 320 | |
| Supply voltage VDD (PIC18LF1XK22) | VDD | 1.8 | 3.6 | V | FOSC ≤ 16 MHz | 324 | |
| Supply voltage VDD (PIC18LF1XK22) | VDD | 2 | 3.6 | V | FOSC ≤ 20 MHz | 324 | |
| Supply voltage VDD (PIC18LF1XK22) | VDD | 3 | 3.6 | V | FOSC ≤ 64 MHz, +85°C | 324 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | PIC18LF1XK22; device in Sleep mode | 324 | ||
| Power-on Reset Release Voltage | VPOR | 1.6 | V | 324 | |||
| Power-on Reset Rearm Voltage | VPORR | 0.8 | V | 324 | |||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | 324 | |||
| Supply current IDD, RC_RUN, HFINTOSC 1 MHz | IDD | 0.4 | 0.5 | mA | -40°C to +125°C; VDD = 1.8V; FOSC = 1 MHz | 326 | |
| Supply current IDD, RC_RUN, HF-INTOSC 16 MHz | IDD | 3.5 | 4.4 | mA | -40°C to +125°C; VDD = 3.0V | 326 | |
| Supply current IDD, RC_IDLE, HF-INTOSC 16 MHz | IDD | 0.89 | 1.2 | mA | -40°C to +125°C; VDD = 1.8V; FOSC = 16 MHz | 327 | |
| Primary run supply current IDD, EC High Osc 64 MHz | IDD | 11.5 | 14 | mA | -40°C to +125°C; VDD = 3.0V; FOSC = 64 MHz | 328 | |
| Primary idle supply current IDD, EC Med Osc 1 MHz | IDD | 70 | 105 | µA | -40°C to +125°C; VDD = 1.8V; FOSC = 1 MHz | 329 | |
| Primary idle supply current IDD, EC High Osc 64 MHz | IDD | 5 | 7 | mA | -40°C to +125°C; VDD = 3.0V; FOSC = 64 MHz | 329 | |
| Power-down Base Current IPD (max +85°C) | IPD | 0.034 | 1 | µA | WDT, BOR, FVR, T1OSC disabled, all peripherals inactive; VDD = 1.8V | 332 | |
| Power-down Base Current IPD (max +85°C) | IPD | 0.071 | 2 | µA | WDT, BOR, FVR, T1OSC disabled, all peripherals inactive; VDD = 3.0V | 332 | |
| Input Low Voltage, I/O with Schmitt Trigger buffer | VIL | 0.2 | VDD | 1.8V ≤ VDD ≤ 5.5V; limit printed as 0.2 VDD | 334 | ||
| Input Low Voltage, I/O with TTL buffer | VIL | 0.15 | VDD | 1.8V ≤ VDD ≤ 4.5V; limit printed as 0.15 VDD | 334 | ||
| Input Low Voltage, I/O ports | VIL | 0.2 | VDD | 2.0V ≤ VDD ≤ 5.5V; limit printed as 0.2 VDD | 334 | ||
| Input High Voltage, I/O with Schmitt Trigger buffer | VIH | 0.8 | VDD | 1.8V ≤ VDD ≤ 5.5V; limit printed as 0.8 VDD | 334 | ||
| Input Low Voltage, MCLR | VIL | 0.2 | VDD | limit printed as 0.2 VDD | 334 | ||
| Input High Voltage, MCLR | VIH | 0.8 | VDD | limit printed as 0.8 VDD | 334 | ||
| Input High Voltage, OSC1 in XT, LP modes | VIH | 1.6 | V | XT, LP modes | 334 | ||
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 3 mA, VDD = VDDMIN | 335 | ||
| Pin capacitance, all I/O pins | CIO | 50 | pF | 336 | |||
| Byte Endurance, Data EEPROM | ED | 100 | K E/W | -40°C to +85°C | 337 | ||
| Cell Endurance, Program Flash | EP | 10 | k E/W | Temperature during programming: 10°C ≤ TA ≤ 40°C | 337 | ||
| Characteristic Retention | TRETD | 40 | Year | Provided no other specifications are violated | 337 | ||
| Oscillator frequency range, PLL input | FOSC | 4 | 5 | MHz | VDD = 1.8-3.0V | 342 | |
| On-Chip VCO System Frequency | FSYS | 16 | 20 | MHz | VDD = 1.8-3.0V | 342 | |
| PLL Start-up Time (Lock Time) | trc | 2 | ms | 342 | |||
| CLKOUT Stability (Jitter) | CLK | -0.25 | 0.25 | % | 342 | ||
| Brown-out Reset Voltage, BORV = 1.9V | VBOR | 1.75 | 1.9 | 2.05 | V | BORV = 1.9V (PIC18LF1XK22 only) | 345 |
| Brown-out Reset Voltage, BORV = 2.2V | VBOR | 2.05 | 2.2 | 2.35 | V | BORV = 2.2V (PIC18LF1XK22 only) | 345 |
| Brown-out Reset Voltage, BORV = 2.7V | VBOR | 2.35 | 2.5 | 2.65 | V | BORV = 2.7V | 345 |
| Brown-out Reset Voltage, BORV = 2.85V | VBOR | 2.65 | 2.85 | 3.05 | V | BORV = 2.85V | 345 |
| Thermal Resistance Junction to Ambient, 20-pin SSOP | JA | 89.3 | °C/W | 20-pin SSOP package | 338 | ||
| Thermal Resistance Junction to Case, 20-pin SSOP | JC | 31.1 | °C/W | 20-pin SSOP package | 338 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 338 |
CAD (KiCad official)
- Symbol:
PIC18LF13K22-I - Footprint:
Package_SO:SSOP-20_5.3x7.2mm_P0.65mm - 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
- 3D model files:
pic18lf13k22-i-etched.step/pic18lf13k22-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18lf13k22-i.step/pic18lf13k22-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (387 pp, sha256
21f69d409798287f, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC18LF13K22-I/SS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC18LF13K22-I/SO