main
Ray
Publish 0.1.0
c8795bb
PIC18F87K22-I
Microchip Tech · MICROCHIP · TQFP-80(12x12)
PIC18F87K22-I from Microchip Tech, in a TQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RH2/AN21/A18 | bidirectional | Digital I/O with analog input AN21 and external address/data line A18 on the 80-pin device. |
| 2 | RH3/AN20/A19 | bidirectional | Digital I/O with analog input AN20 and external address/data line A19 on the 80-pin device. |
| 3 | RE1/P2C/WR/AD9 | bidirectional | Digital I/O that also carries ECCP2 PWM output C, the Parallel Slave Port write strobe and external address/data bit 9. |
| 4 | RE0/P2D/RD/AD8 | bidirectional | Digital I/O that also carries ECCP2 PWM output D, the Parallel Slave Port read strobe and external address/data bit 8. |
| 5 | RG0/ECCP3/P3A | bidirectional | Digital I/O with Schmitt Trigger input that also carries ECCP3 capture/compare and PWM output A. |
| 6 | RG1/TX2/CK2/AN19/C3OUT | bidirectional | Digital I/O that also carries EUSART2 asynchronous transmit or synchronous clock, analog input AN19 and comparator 3 output. |
| 7 | RG2/RX2/DT2/AN18/C3INA | bidirectional | Digital I/O that also carries EUSART2 receive or synchronous data, analog input AN18 and comparator 3 input A. |
| 8 | RG3/CCP4/AN17/P3D/C3INB | bidirectional | Digital I/O that also carries CCP4 capture/compare/PWM, analog input AN17, ECCP3 PWM output D and comparator 3 input B. |
| 9 | MCLR/RG5 | input | Active-low Master Clear Reset input or programming voltage input; when MCLR is disabled this pin is a general purpose input-only pin RG5. |
| 10 | RG4/RTCC/T7CKI/T5G/CCP5/AN16/P1D/C3INC | bidirectional | Digital I/O that also carries RTCC output, Timer7 clock input, Timer5 gate input, CCP5, analog input AN16, ECCP1 PWM output D and comparator 3 input C. |
| 11 | VSS | power_in | Ground reference for logic and I/O pins. |
| 12 | VDDCORE/VCAP | power_in | Core logic power supply or external filter capacitor connection for the on-chip regulator; the datasheet specifies a 10 µF capacitor when the regulator is enabled. |
| 13 | RF7/AN5/SS1 | bidirectional | Digital I/O with analog input AN5 and SPI1 slave select input. |
| 14 | RF6/AN11/C1INA | bidirectional | Digital I/O with analog input AN11 and comparator 1 input A. |
| 15 | RF5/AN10/C1INB | bidirectional | Digital I/O with analog input AN10 and comparator 1 input B. |
| 16 | RF4/AN9/C2INA | bidirectional | Digital I/O with analog input AN9 and comparator 2 input A. |
| 17 | RF3/AN8/C2INB/CTMUI | bidirectional | Digital I/O with analog input AN8, comparator 2 input B and CTMU pulse generator charger output for C2INB. |
| 18 | RF2/AN7/C1OUT | bidirectional | Digital I/O with analog input AN7 and comparator 1 output. |
| 19 | RH7/CCP6/P1B/AN15 | bidirectional | Digital I/O that also carries CCP6 capture/compare/PWM, ECCP1 PWM output B and analog input AN15. |
| 20 | RH6/CCP7/P1C/AN14/C1INC | bidirectional | Digital I/O that also carries CCP7 capture/compare/PWM, ECCP1 PWM output C, analog input AN14 and comparator 1 input C. |
| 21 | RH5/CCP8/P3B/AN13/C2IND | bidirectional | Digital I/O that also carries CCP8 capture/compare/PWM, ECCP3 PWM output B, analog input AN13 and comparator 2 input D. |
| 22 | RH4/CCP9/P3C/AN12/C2INC | bidirectional | Digital I/O that also carries CCP9 capture/compare/PWM, ECCP3 PWM output C, analog input AN12 and comparator 2 input C. |
| 23 | RF1/AN6/C2OUT/CTDIN | bidirectional | Digital I/O with analog input AN6, comparator 2 output and CTMU pulse delay input. |
| 24 | ENVREG | input | Enable pin for the on-chip voltage regulator; tying it to VDD enables the regulator and tying it to ground disables it. |
| 25 | AVDD | power_in | Positive supply for analog modules. |
| 26 | AVSS | power_in | Ground reference for analog modules. |
| 27 | RA3/AN3/VREF+ | bidirectional | Digital I/O with analog input AN3 and A/D high reference voltage input VREF+. |
| 28 | RA2/AN2/VREF- | bidirectional | Digital I/O with analog input AN2 and A/D low reference voltage input VREF-. |
| 29 | RA1/AN1 | bidirectional | Digital I/O with analog input AN1. |
| 30 | RA0/AN0/ULPWU | bidirectional | Digital I/O with analog input AN0 and Ultra Low-Power Wake-up input. |
| 31 | VSS | power_in | Ground reference for logic and I/O pins. |
| 32 | VDD | power_in | Positive supply for logic and I/O pins. |
| 33 | RA5/AN4/T1CKI/T3G/HLVDIN | bidirectional | Digital I/O with analog input AN4, Timer1 clock input, Timer3 gate input and high/low-voltage detect input HLVDIN. |
| 34 | RA4/T0CKI | bidirectional | Digital I/O with Schmitt Trigger input that also serves as Timer0 external clock input. |
| 35 | RC1/SOSCI/ECCP2/P2A | bidirectional | Digital I/O that also serves as SOSC oscillator input, ECCP2 capture/compare/PWM (default assignment) and ECCP2 PWM output A. |
| 36 | RC0/SOSCO/SCLKI | bidirectional | Digital I/O that also serves as SOSC oscillator output and digital SOSC clock input. |
| 37 | RC6/TX1/CK1 | bidirectional | Digital I/O that also carries EUSART1 asynchronous transmit or synchronous clock. |
| 38 | RC7/RX1/DT1 | bidirectional | Digital I/O that also carries EUSART1 asynchronous receive or synchronous data. |
| 39 | RJ4/BA0 | bidirectional | Digital I/O that becomes external memory byte address 0 control output when the external memory bus is enabled. |
| 40 | RJ5/CE | bidirectional | Digital I/O that becomes external memory chip enable control output when the external memory bus is enabled. |
| 41 | RJ6/LB | bidirectional | Digital I/O that becomes external memory lower byte enable control output when the external memory bus is enabled. |
| 42 | RJ7/UB | bidirectional | Digital I/O that becomes external memory upper byte enable control output when the external memory bus is enabled. |
| 43 | RC2/ECCP1/P1A | bidirectional | Digital I/O that also carries ECCP1 capture/compare/PWM and ECCP1 Enhanced PWM output A. |
| 44 | RC3/SCK1/SCL1 | bidirectional | Digital I/O that also carries MSSP1 SPI clock or I2C clock. |
| 45 | RC4/SDI1/SDA1 | bidirectional | Digital I/O that also carries MSSP1 SPI data input or I2C data. |
| 46 | RC5/SDO1 | bidirectional | Digital I/O that also carries MSSP1 SPI data output. |
| 47 | RB7/KBI3/PGD | bidirectional | Digital I/O with weak pull-up and interrupt-on-change that also serves as the ICSP and ICD data pin. |
| 48 | VDD | power_in | Positive supply for logic and I/O pins. |
| 49 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input; in internal oscillator modes this pin becomes general purpose I/O RA7. |
| 50 | OSC2/CLKO/RA6 | output | Oscillator crystal or clock output; in certain oscillator modes it outputs CLKO at 1/4 the OSC1 frequency, otherwise it is general purpose I/O RA6. |
| 51 | VSS | power_in | Ground reference for logic and I/O pins. |
| 52 | RB6/KBI2/PGC | bidirectional | Digital I/O with weak pull-up and interrupt-on-change that also serves as the ICSP and ICD clock pin. |
| 53 | RB5/KBI1/T3CKI/T1G | bidirectional | Digital I/O with weak pull-up and interrupt-on-change that also serves as Timer3 clock input and Timer1 gate input. |
| 54 | RB4/KBI0 | bidirectional | Digital I/O with weak pull-up and interrupt-on-change. |
| 55 | RB3/INT3/CTED2/ECCP2/P2A | bidirectional | Digital I/O with weak pull-up that also serves as external interrupt 3, CTMU edge 2 input, ECCP2 and ECCP2 PWM output A. |
| 56 | RB2/INT2/CTED1 | bidirectional | Digital I/O with weak pull-up that also serves as external interrupt 2 and CTMU edge 1 input. |
| 57 | RB1/INT1 | bidirectional | Digital I/O with weak pull-up that also serves as external interrupt 1. |
| 58 | RB0/INT0/FLT0 | bidirectional | Digital I/O with weak pull-up that also serves as external interrupt 0 and enhanced PWM fault input for ECCP1/2/3. |
| 59 | RJ3/WRH | bidirectional | Digital I/O that becomes external memory high-byte write control when the external memory bus is enabled. |
| 60 | RJ2/WRL | bidirectional | Digital I/O that becomes external memory low-byte write control when the external memory bus is enabled. |
| 61 | RJ1/OE | bidirectional | Digital I/O that becomes external memory output enable control when the external memory bus is enabled. |
| 62 | RJ0/ALE | bidirectional | Digital I/O that becomes external memory address latch enable control when the external memory bus is enabled. |
| 63 | RD7/SS2/PSP7/AD7 | bidirectional | Digital I/O that also carries Parallel Slave Port data bit 7, SPI2 slave select input and external address/data bit 7. |
| 64 | RD6/SCK2/SCL2/PSP6/AD6 | bidirectional | Digital I/O that also carries MSSP2 SPI clock or I2C clock, Parallel Slave Port data bit 6 and external address/data bit 6. |
| 65 | RD5/SDI2/SDA2/PSP5/AD5 | bidirectional | Digital I/O that also carries MSSP2 SPI data input or I2C data, Parallel Slave Port data bit 5 and external address/data bit 5. |
| 66 | RD4/SDO2/PSP4/AD4 | bidirectional | Digital I/O that also carries MSSP2 SPI data output, Parallel Slave Port data bit 4 and external address/data bit 4. |
| 67 | RD3/PSP3/AD3 | bidirectional | Digital I/O that also carries Parallel Slave Port data bit 3 and external address/data bit 3. |
| 68 | RD2/PSP2/AD2 | bidirectional | Digital I/O that also carries Parallel Slave Port data bit 2 and external address/data bit 2. |
| 69 | RD1/T5CKI/T7G/PSP1/AD1 | bidirectional | Digital I/O that also carries Timer5 clock input, Timer7 gate input, Parallel Slave Port data bit 1 and external address/data bit 1. |
| 70 | VSS | power_in | Ground reference for logic and I/O pins. |
| 71 | VDD | power_in | Positive supply for logic and I/O pins. |
| 72 | RD0/PSP0/CTPLS/AD0 | bidirectional | Digital I/O that also carries Parallel Slave Port data bit 0, CTMU pulse generator output and external address/data bit 0. |
| 73 | RE7/ECCP2/P2A/AD15 | bidirectional | Digital I/O that also carries ECCP2 capture/compare/PWM (alternate assignment), ECCP2 PWM output A and external address/data bit 15. |
| 74 | RE6/P1B/CCP6/AD14 | bidirectional | Digital I/O that also carries ECCP1 PWM output B, CCP6 capture/compare/PWM and external address/data bit 14. |
| 75 | RE5/P1C/CCP7/AD13 | bidirectional | Digital I/O that also carries ECCP1 PWM output C, CCP7 capture/compare/PWM and external address/data bit 13. |
| 76 | RE4/P3B/CCP8/AD12 | bidirectional | Digital I/O that also carries ECCP3 PWM output B, CCP8 capture/compare/PWM and external address/data bit 12. |
| 77 | RE3/P3C/CCP9/REFO/AD11 | bidirectional | Digital I/O that also carries ECCP3 PWM output C, CCP9 capture/compare/PWM, reference clock output REFO and external address/data bit 11. |
| 78 | RE2/P2B/CCP10/CS/AD10 | bidirectional | Digital I/O that also carries ECCP2 PWM output B, CCP10 capture/compare/PWM, Parallel Slave Port chip select and external address/data bit 10. |
| 79 | RH0/AN23/A16 | bidirectional | Digital I/O with analog input AN23 and external address line A16. |
| 80 | RH1/AN22/A17 | bidirectional | Digital I/O with analog input AN22 and external address line A17. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-80(12x12) |
| Category | Embedded Processors & Controllers |
| Pins | 80 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | 1.8 | 5.5 | V | 1 | |||
| Operating Speed | 64 | MHz | 1 | ||||
| Flash Program Memory Erase/Write Cycles | 10000 | cycles | 1 | ||||
| Flash Retention | 40 | years | 1 | ||||
| VCAP/VDDCORE Capacitor ESR | 5 | Ω | Voltage regulator enabled | 37 |
CAD (KiCad official)
- Symbol:
PIC18F87K22-I - Footprint:
Package_QFP:TQFP-80_12x12mm_P0.5mm - 3D model: TQFP-80(12x12) (KiCad packages3D, STEP)
- 3D model files:
pic18f87k22-i-etched.step/pic18f87k22-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f87k22-i.step/pic18f87k22-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (526 pp, sha256
861566b69a31c816, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC18F87K22-I
**Microchip Tech** · MICROCHIP · TQFP-80(12x12)
PIC18F87K22-I from Microchip Tech, in a TQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RH2/AN21/A18 | bidirectional | Digital I/O with analog input AN21 and external address/data line A18 on the 80-pin device. |
| 2 | RH3/AN20/A19 | bidirectional | Digital I/O with analog input AN20 and external address/data line A19 on the 80-pin device. |
| 3 | RE1/P2C/WR/AD9 | bidirectional | Digital I/O that also carries ECCP2 PWM output C, the Parallel Slave Port write strobe and external address/data bit 9. |
| 4 | RE0/P2D/RD/AD8 | bidirectional | Digital I/O that also carries ECCP2 PWM output D, the Parallel Slave Port read strobe and external address/data bit 8. |
| 5 | RG0/ECCP3/P3A | bidirectional | Digital I/O with Schmitt Trigger input that also carries ECCP3 capture/compare and PWM output A. |
| 6 | RG1/TX2/CK2/AN19/C3OUT | bidirectional | Digital I/O that also carries EUSART2 asynchronous transmit or synchronous clock, analog input AN19 and comparator 3 output. |
| 7 | RG2/RX2/DT2/AN18/C3INA | bidirectional | Digital I/O that also carries EUSART2 receive or synchronous data, analog input AN18 and comparator 3 input A. |
| 8 | RG3/CCP4/AN17/P3D/C3INB | bidirectional | Digital I/O that also carries CCP4 capture/compare/PWM, analog input AN17, ECCP3 PWM output D and comparator 3 input B. |
| 9 | MCLR/RG5 | input | Active-low Master Clear Reset input or programming voltage input; when MCLR is disabled this pin is a general purpose input-only pin RG5. |
| 10 | RG4/RTCC/T7CKI/T5G/CCP5/AN16/P1D/C3INC | bidirectional | Digital I/O that also carries RTCC output, Timer7 clock input, Timer5 gate input, CCP5, analog input AN16, ECCP1 PWM output D and comparator 3 input C. |
| 11 | VSS | power_in | Ground reference for logic and I/O pins. |
| 12 | VDDCORE/VCAP | power_in | Core logic power supply or external filter capacitor connection for the on-chip regulator; the datasheet specifies a 10 µF capacitor when the regulator is enabled. |
| 13 | RF7/AN5/SS1 | bidirectional | Digital I/O with analog input AN5 and SPI1 slave select input. |
| 14 | RF6/AN11/C1INA | bidirectional | Digital I/O with analog input AN11 and comparator 1 input A. |
| 15 | RF5/AN10/C1INB | bidirectional | Digital I/O with analog input AN10 and comparator 1 input B. |
| 16 | RF4/AN9/C2INA | bidirectional | Digital I/O with analog input AN9 and comparator 2 input A. |
| 17 | RF3/AN8/C2INB/CTMUI | bidirectional | Digital I/O with analog input AN8, comparator 2 input B and CTMU pulse generator charger output for C2INB. |
| 18 | RF2/AN7/C1OUT | bidirectional | Digital I/O with analog input AN7 and comparator 1 output. |
| 19 | RH7/CCP6/P1B/AN15 | bidirectional | Digital I/O that also carries CCP6 capture/compare/PWM, ECCP1 PWM output B and analog input AN15. |
| 20 | RH6/CCP7/P1C/AN14/C1INC | bidirectional | Digital I/O that also carries CCP7 capture/compare/PWM, ECCP1 PWM output C, analog input AN14 and comparator 1 input C. |
| 21 | RH5/CCP8/P3B/AN13/C2IND | bidirectional | Digital I/O that also carries CCP8 capture/compare/PWM, ECCP3 PWM output B, analog input AN13 and comparator 2 input D. |
| 22 | RH4/CCP9/P3C/AN12/C2INC | bidirectional | Digital I/O that also carries CCP9 capture/compare/PWM, ECCP3 PWM output C, analog input AN12 and comparator 2 input C. |
| 23 | RF1/AN6/C2OUT/CTDIN | bidirectional | Digital I/O with analog input AN6, comparator 2 output and CTMU pulse delay input. |
| 24 | ENVREG | input | Enable pin for the on-chip voltage regulator; tying it to VDD enables the regulator and tying it to ground disables it. |
| 25 | AVDD | power_in | Positive supply for analog modules. |
| 26 | AVSS | power_in | Ground reference for analog modules. |
| 27 | RA3/AN3/VREF+ | bidirectional | Digital I/O with analog input AN3 and A/D high reference voltage input VREF+. |
| 28 | RA2/AN2/VREF- | bidirectional | Digital I/O with analog input AN2 and A/D low reference voltage input VREF-. |
| 29 | RA1/AN1 | bidirectional | Digital I/O with analog input AN1. |
| 30 | RA0/AN0/ULPWU | bidirectional | Digital I/O with analog input AN0 and Ultra Low-Power Wake-up input. |
| 31 | VSS | power_in | Ground reference for logic and I/O pins. |
| 32 | VDD | power_in | Positive supply for logic and I/O pins. |
| 33 | RA5/AN4/T1CKI/T3G/HLVDIN | bidirectional | Digital I/O with analog input AN4, Timer1 clock input, Timer3 gate input and high/low-voltage detect input HLVDIN. |
| 34 | RA4/T0CKI | bidirectional | Digital I/O with Schmitt Trigger input that also serves as Timer0 external clock input. |
| 35 | RC1/SOSCI/ECCP2/P2A | bidirectional | Digital I/O that also serves as SOSC oscillator input, ECCP2 capture/compare/PWM (default assignment) and ECCP2 PWM output A. |
| 36 | RC0/SOSCO/SCLKI | bidirectional | Digital I/O that also serves as SOSC oscillator output and digital SOSC clock input. |
| 37 | RC6/TX1/CK1 | bidirectional | Digital I/O that also carries EUSART1 asynchronous transmit or synchronous clock. |
| 38 | RC7/RX1/DT1 | bidirectional | Digital I/O that also carries EUSART1 asynchronous receive or synchronous data. |
| 39 | RJ4/BA0 | bidirectional | Digital I/O that becomes external memory byte address 0 control output when the external memory bus is enabled. |
| 40 | RJ5/CE | bidirectional | Digital I/O that becomes external memory chip enable control output when the external memory bus is enabled. |
| 41 | RJ6/LB | bidirectional | Digital I/O that becomes external memory lower byte enable control output when the external memory bus is enabled. |
| 42 | RJ7/UB | bidirectional | Digital I/O that becomes external memory upper byte enable control output when the external memory bus is enabled. |
| 43 | RC2/ECCP1/P1A | bidirectional | Digital I/O that also carries ECCP1 capture/compare/PWM and ECCP1 Enhanced PWM output A. |
| 44 | RC3/SCK1/SCL1 | bidirectional | Digital I/O that also carries MSSP1 SPI clock or I2C clock. |
| 45 | RC4/SDI1/SDA1 | bidirectional | Digital I/O that also carries MSSP1 SPI data input or I2C data. |
| 46 | RC5/SDO1 | bidirectional | Digital I/O that also carries MSSP1 SPI data output. |
| 47 | RB7/KBI3/PGD | bidirectional | Digital I/O with weak pull-up and interrupt-on-change that also serves as the ICSP and ICD data pin. |
| 48 | VDD | power_in | Positive supply for logic and I/O pins. |
| 49 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input; in internal oscillator modes this pin becomes general purpose I/O RA7. |
| 50 | OSC2/CLKO/RA6 | output | Oscillator crystal or clock output; in certain oscillator modes it outputs CLKO at 1/4 the OSC1 frequency, otherwise it is general purpose I/O RA6. |
| 51 | VSS | power_in | Ground reference for logic and I/O pins. |
| 52 | RB6/KBI2/PGC | bidirectional | Digital I/O with weak pull-up and interrupt-on-change that also serves as the ICSP and ICD clock pin. |
| 53 | RB5/KBI1/T3CKI/T1G | bidirectional | Digital I/O with weak pull-up and interrupt-on-change that also serves as Timer3 clock input and Timer1 gate input. |
| 54 | RB4/KBI0 | bidirectional | Digital I/O with weak pull-up and interrupt-on-change. |
| 55 | RB3/INT3/CTED2/ECCP2/P2A | bidirectional | Digital I/O with weak pull-up that also serves as external interrupt 3, CTMU edge 2 input, ECCP2 and ECCP2 PWM output A. |
| 56 | RB2/INT2/CTED1 | bidirectional | Digital I/O with weak pull-up that also serves as external interrupt 2 and CTMU edge 1 input. |
| 57 | RB1/INT1 | bidirectional | Digital I/O with weak pull-up that also serves as external interrupt 1. |
| 58 | RB0/INT0/FLT0 | bidirectional | Digital I/O with weak pull-up that also serves as external interrupt 0 and enhanced PWM fault input for ECCP1/2/3. |
| 59 | RJ3/WRH | bidirectional | Digital I/O that becomes external memory high-byte write control when the external memory bus is enabled. |
| 60 | RJ2/WRL | bidirectional | Digital I/O that becomes external memory low-byte write control when the external memory bus is enabled. |
| 61 | RJ1/OE | bidirectional | Digital I/O that becomes external memory output enable control when the external memory bus is enabled. |
| 62 | RJ0/ALE | bidirectional | Digital I/O that becomes external memory address latch enable control when the external memory bus is enabled. |
| 63 | RD7/SS2/PSP7/AD7 | bidirectional | Digital I/O that also carries Parallel Slave Port data bit 7, SPI2 slave select input and external address/data bit 7. |
| 64 | RD6/SCK2/SCL2/PSP6/AD6 | bidirectional | Digital I/O that also carries MSSP2 SPI clock or I2C clock, Parallel Slave Port data bit 6 and external address/data bit 6. |
| 65 | RD5/SDI2/SDA2/PSP5/AD5 | bidirectional | Digital I/O that also carries MSSP2 SPI data input or I2C data, Parallel Slave Port data bit 5 and external address/data bit 5. |
| 66 | RD4/SDO2/PSP4/AD4 | bidirectional | Digital I/O that also carries MSSP2 SPI data output, Parallel Slave Port data bit 4 and external address/data bit 4. |
| 67 | RD3/PSP3/AD3 | bidirectional | Digital I/O that also carries Parallel Slave Port data bit 3 and external address/data bit 3. |
| 68 | RD2/PSP2/AD2 | bidirectional | Digital I/O that also carries Parallel Slave Port data bit 2 and external address/data bit 2. |
| 69 | RD1/T5CKI/T7G/PSP1/AD1 | bidirectional | Digital I/O that also carries Timer5 clock input, Timer7 gate input, Parallel Slave Port data bit 1 and external address/data bit 1. |
| 70 | VSS | power_in | Ground reference for logic and I/O pins. |
| 71 | VDD | power_in | Positive supply for logic and I/O pins. |
| 72 | RD0/PSP0/CTPLS/AD0 | bidirectional | Digital I/O that also carries Parallel Slave Port data bit 0, CTMU pulse generator output and external address/data bit 0. |
| 73 | RE7/ECCP2/P2A/AD15 | bidirectional | Digital I/O that also carries ECCP2 capture/compare/PWM (alternate assignment), ECCP2 PWM output A and external address/data bit 15. |
| 74 | RE6/P1B/CCP6/AD14 | bidirectional | Digital I/O that also carries ECCP1 PWM output B, CCP6 capture/compare/PWM and external address/data bit 14. |
| 75 | RE5/P1C/CCP7/AD13 | bidirectional | Digital I/O that also carries ECCP1 PWM output C, CCP7 capture/compare/PWM and external address/data bit 13. |
| 76 | RE4/P3B/CCP8/AD12 | bidirectional | Digital I/O that also carries ECCP3 PWM output B, CCP8 capture/compare/PWM and external address/data bit 12. |
| 77 | RE3/P3C/CCP9/REFO/AD11 | bidirectional | Digital I/O that also carries ECCP3 PWM output C, CCP9 capture/compare/PWM, reference clock output REFO and external address/data bit 11. |
| 78 | RE2/P2B/CCP10/CS/AD10 | bidirectional | Digital I/O that also carries ECCP2 PWM output B, CCP10 capture/compare/PWM, Parallel Slave Port chip select and external address/data bit 10. |
| 79 | RH0/AN23/A16 | bidirectional | Digital I/O with analog input AN23 and external address line A16. |
| 80 | RH1/AN22/A17 | bidirectional | Digital I/O with analog input AN22 and external address line A17. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-80(12x12) |
| Category | Embedded Processors & Controllers |
| Pins | 80 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | | 1.8 | | 5.5 | V | | 1 |
| Operating Speed | | | | 64 | MHz | | 1 |
| Flash Program Memory Erase/Write Cycles | | 10000 | | | cycles | | 1 |
| Flash Retention | | 40 | | | years | | 1 |
| VCAP/VDDCORE Capacitor ESR | | | | 5 | Ω | Voltage regulator enabled | 37 |
## CAD (KiCad official)
- Symbol: `PIC18F87K22-I`
- Footprint: `Package_QFP:TQFP-80_12x12mm_P0.5mm`
- 3D model: TQFP-80(12x12) (KiCad packages3D, STEP)
- 3D model files: `pic18f87k22-i-etched.step` / `pic18f87k22-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic18f87k22-i.step` / `pic18f87k22-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/PIC18F87K22-Family-Data-Sheet-DS30009960.pdf) (526 pp, sha256 `861566b69a31c816`, retrieved 2026-10-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic18f87k22-i-datasheet.pdf)