Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18F87J90-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-80(12x12)
PIC18F87J90-I from Microchip Tech, in a TQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RH2/SEG45 | bidirectional | PORTH digital I/O pin RH2 (Schmitt Trigger input) that is multiplexed with LCD segment output SEG45; I/O function is only available when the segment is disabled. |
| 2 | RH3/SEG44 | bidirectional | PORTH digital I/O pin RH3 (Schmitt Trigger input) that is multiplexed with LCD segment output SEG44; I/O function is only available when the segment is disabled. |
| 3 | RE1/LCDBIAS2 | bidirectional | PORTE digital I/O pin RE1 that doubles as LCD module bias voltage input LCDBIAS2 and cannot be used as digital I/O when LCD bias generation is required. |
| 4 | RE0/LCDBIAS1 | bidirectional | PORTE digital I/O pin RE0 that doubles as LCD module bias voltage input LCDBIAS1 and cannot be used as digital I/O when LCD bias generation is required. |
| 5 | RG0/LCDBIAS0 | bidirectional | PORTG digital I/O pin RG0 that doubles as LCD module bias voltage input LCDBIAS0. |
| 6 | RG1/TX2/CK2 | bidirectional | PORTG digital I/O pin RG1 that is multiplexed with AUSART asynchronous transmit TX2 and synchronous clock CK2; open-drain option via U2OD. |
| 7 | RG2/RX2/DT2/VLCAP1 | bidirectional | PORTG digital I/O pin RG2 that is multiplexed with AUSART receive RX2, synchronous data DT2 and LCD charge pump capacitor input VLCAP1. |
| 8 | RG3/VLCAP2 | bidirectional | PORTG digital I/O pin RG3 that doubles as LCD charge pump capacitor input VLCAP2. |
| 9 | MCLR | input | Master Clear input (active-low) that resets the device, or programming voltage input. |
| 10 | RG4/SEG26/RTCC | bidirectional | PORTG digital I/O pin RG4 that is multiplexed with LCD segment output SEG26 and RTCC output. |
| 11 | VSS | power_in | Ground reference for logic and I/O pins. |
| 12 | VDDCORE/VCAP | power_in | Core logic power supply (regulator disabled) or external filter capacitor connection (regulator enabled). |
| 13 | RF7/AN5/SS/SEG25 | bidirectional | PORTF digital I/O pin RF7 that is multiplexed with analog input AN5, SPI slave select input SS and LCD segment output SEG25. |
| 14 | RF6/AN11/SEG24/C1INA | bidirectional | PORTF digital I/O pin RF6 that is multiplexed with analog input AN11, LCD segment output SEG24 and Comparator 1 input A. |
| 15 | RF5/AN10/CVREF/SEG23/C1INB | bidirectional | PORTF digital I/O pin RF5 that is multiplexed with analog input AN10, comparator voltage reference output CVREF, LCD segment output SEG23 and Comparator 1 input B. |
| 16 | RF4/AN9/SEG22/C2INA | bidirectional | PORTF digital I/O pin RF4 that is multiplexed with analog input AN9, LCD segment output SEG22 and Comparator 2 input A. |
| 17 | RF3/AN8/SEG21/C2INB | bidirectional | PORTF digital I/O pin RF3 that is multiplexed with analog input AN8, LCD segment output SEG21 and Comparator 2 input B. |
| 18 | RF2/AN7/C1OUT/SEG20 | bidirectional | PORTF digital I/O pin RF2 that is multiplexed with analog input AN7, Comparator 1 output C1OUT and LCD segment output SEG20. |
| 19 | RH7/SEG43 | bidirectional | PORTH digital I/O pin RH7 (Schmitt Trigger input) that is multiplexed with LCD segment output SEG43. |
| 20 | RH6/SEG42 | bidirectional | PORTH digital I/O pin RH6 (Schmitt Trigger input) that is multiplexed with LCD segment output SEG42. |
| 21 | RH5/SEG41 | bidirectional | PORTH digital I/O pin RH5 (Schmitt Trigger input) that is multiplexed with LCD segment output SEG41. |
| 22 | RH4/SEG40 | bidirectional | PORTH digital I/O pin RH4 (Schmitt Trigger input) that is multiplexed with LCD segment output SEG40. |
| 23 | RF1/AN6/C2OUT/SEG19 | bidirectional | PORTF digital I/O pin RF1 that is multiplexed with analog input AN6, Comparator 2 output C2OUT and LCD segment output SEG19. |
| 24 | ENVREG | input | Enable input for the on-chip voltage regulator; tie to VDD to enable the regulator or to ground to disable it. |
| 25 | AVDD | power_in | Positive supply for analog modules. |
| 26 | AVSS | power_in | Ground reference for analog modules. |
| 27 | RA3/AN3/VREF+ | bidirectional | PORTA digital I/O pin RA3 that is multiplexed with analog input AN3 and A/D reference voltage (high) input VREF+. |
| 28 | RA2/AN2/VREF- | bidirectional | PORTA digital I/O pin RA2 that is multiplexed with analog input AN2 and A/D reference voltage (low) input VREF-. |
| 29 | RA1/AN1/SEG18 | bidirectional | PORTA digital I/O pin RA1 that is multiplexed with analog input AN1 and LCD segment output SEG18. |
| 30 | RA0/AN0 | bidirectional | PORTA digital I/O pin RA0 that is multiplexed with analog input AN0. |
| 31 | VSS | power_in | Ground reference for logic and I/O pins. |
| 32 | VDD | power_in | Positive supply for logic and I/O pins. |
| 33 | RA5/AN4/SEG15 | bidirectional | PORTA digital I/O pin RA5 that is multiplexed with analog input AN4 and LCD segment output SEG15. |
| 34 | RA4/T0CKI/SEG14 | bidirectional | PORTA digital I/O pin RA4 (Schmitt Trigger input) that is multiplexed with Timer0 external clock input T0CKI and LCD segment output SEG14. |
| 35 | RC1/T1OSI/CCP2/SEG32 | bidirectional | PORTC digital I/O pin RC1 that is multiplexed with Timer1 oscillator input T1OSI, CCP2 (default assignment) and LCD segment output SEG32. |
| 36 | RC0/T1OSO/T13CKI | bidirectional | PORTC digital I/O pin RC0 that is multiplexed with Timer1 oscillator output T1OSO and Timer1/Timer3 external clock input T13CKI. |
| 37 | RC6/TX1/CK1/SEG27 | bidirectional | PORTC digital I/O pin RC6 that is multiplexed with EUSART asynchronous transmit TX1, synchronous clock CK1 and LCD segment output SEG27. |
| 38 | RC7/RX1/DT1/SEG28 | bidirectional | PORTC digital I/O pin RC7 that is multiplexed with EUSART asynchronous receive RX1, synchronous data DT1 and LCD segment output SEG28. |
| 39 | RJ4/SEG39 | bidirectional | PORTJ digital I/O pin RJ4 that is multiplexed with LCD segment output SEG39. |
| 40 | RJ5/SEG38 | bidirectional | PORTJ digital I/O pin RJ5 that is multiplexed with LCD segment output SEG38. |
| 41 | RJ6/SEG37 | bidirectional | PORTJ digital I/O pin RJ6 that is multiplexed with LCD segment output SEG37. |
| 42 | RJ7/SEG36 | bidirectional | PORTJ digital I/O pin RJ7 that is multiplexed with LCD segment output SEG36. |
| 43 | RC2/CCP1/SEG13 | bidirectional | PORTC digital I/O pin RC2 (Schmitt Trigger input) that is multiplexed with CCP1 capture input/compare and PWM output and LCD segment output SEG13. |
| 44 | RC3/SCK/SCL/SEG17 | bidirectional | PORTC digital I/O pin RC3 that is multiplexed with MSSP SPI clock SCK, I2C clock SCL and LCD segment output SEG17. |
| 45 | RC4/SDI/SDA/SEG16 | bidirectional | PORTC digital I/O pin RC4 that is multiplexed with MSSP SPI data input SDI, I2C data SDA and LCD segment output SEG16. |
| 46 | RC5/SDO/SEG12 | bidirectional | PORTC digital I/O pin RC5 that is multiplexed with MSSP SPI data output SDO and LCD segment output SEG12. |
| 47 | RB7/KBI3/PGD | bidirectional | PORTB digital I/O pin RB7 with weak pull-up control and interrupt-on-change input KBI3, also the ICSP/ICD programming data pin PGD. |
| 48 | VDD | power_in | Positive supply for logic and I/O pins. |
| 49 | OSC1/CLKI/RA7 | input | Oscillator crystal input (HS mode) or external clock input (EC mode); also general purpose I/O pin RA7 when not used as oscillator. |
| 50 | OSC2/CLKO/RA6 | output | Oscillator crystal output (HS mode) or CLKO output at FOSC/4 (EC mode); also general purpose I/O pin RA6 when not used as oscillator. |
| 51 | VSS | power_in | Ground reference for logic and I/O pins. |
| 52 | RB6/KBI2/PGC | bidirectional | PORTB digital I/O pin RB6 with weak pull-up control and interrupt-on-change input KBI2, also the ICSP/ICD programming clock pin PGC. |
| 53 | RB5/KBI1/SEG29 | bidirectional | PORTB digital I/O pin RB5 with weak pull-up control, interrupt-on-change input KBI1 and LCD segment output SEG29. |
| 54 | RB4/KBI0/SEG11 | bidirectional | PORTB digital I/O pin RB4 with weak pull-up control, interrupt-on-change input KBI0 and LCD segment output SEG11. |
| 55 | RB3/INT3/SEG10/CTED2 | bidirectional | PORTB digital I/O pin RB3 with weak pull-up control that is multiplexed with external interrupt INT3, LCD segment output SEG10 and CTMU Edge 2 input. |
| 56 | RB2/INT2/SEG9/CTED1 | bidirectional | PORTB digital I/O pin RB2 with weak pull-up control that is multiplexed with external interrupt INT2, LCD segment output SEG9 and CTMU Edge 1 input. |
| 57 | RB1/INT1/SEG8 | bidirectional | PORTB digital I/O pin RB1 with weak pull-up control that is multiplexed with external interrupt INT1 and LCD segment output SEG8. |
| 58 | RB0/INT0/SEG30 | bidirectional | PORTB digital I/O pin RB0 with weak pull-up control that is multiplexed with external interrupt INT0 and LCD segment output SEG30. |
| 59 | RJ3/SEG35 | bidirectional | PORTJ digital I/O pin RJ3 that is multiplexed with LCD segment output SEG35. |
| 60 | RJ2/SEG34 | bidirectional | PORTJ digital I/O pin RJ2 that is multiplexed with LCD segment output SEG34. |
| 61 | RJ1/SEG33 | bidirectional | PORTJ digital I/O pin RJ1 that is multiplexed with LCD segment output SEG33. |
| 62 | RJ0 | bidirectional | PORTJ digital I/O pin RJ0 (Schmitt Trigger input) with weak pull-up control; digital only. |
| 63 | RD7/SEG7 | bidirectional | PORTD digital I/O pin RD7 (Schmitt Trigger input) that is multiplexed with LCD segment output SEG7. |
| 64 | RD6/SEG6 | bidirectional | PORTD digital I/O pin RD6 (Schmitt Trigger input) that is multiplexed with LCD segment output SEG6. |
| 65 | RD5/SEG5 | bidirectional | PORTD digital I/O pin RD5 (Schmitt Trigger input) that is multiplexed with LCD segment output SEG5. |
| 66 | RD4/SEG4 | bidirectional | PORTD digital I/O pin RD4 (Schmitt Trigger input) that is multiplexed with LCD segment output SEG4. |
| 67 | RD3/SEG3 | bidirectional | PORTD digital I/O pin RD3 (Schmitt Trigger input) that is multiplexed with LCD segment output SEG3. |
| 68 | RD2/SEG2 | bidirectional | PORTD digital I/O pin RD2 (Schmitt Trigger input) that is multiplexed with LCD segment output SEG2. |
| 69 | RD1/SEG1 | bidirectional | PORTD digital I/O pin RD1 (Schmitt Trigger input) that is multiplexed with LCD segment output SEG1. |
| 70 | VSS | power_in | Ground reference for logic and I/O pins. |
| 71 | VDD | power_in | Positive supply for logic and I/O pins. |
| 72 | RD0/SEG0/CTPLS | bidirectional | PORTD digital I/O pin RD0 (Schmitt Trigger input) that is multiplexed with LCD segment output SEG0 and CTMU pulse generator output CTPLS. |
| 73 | RE7/CCP2/SEG31 | bidirectional | PORTE digital I/O pin RE7 (Schmitt Trigger input) that is multiplexed with CCP2 alternate assignment (when CCP2MX is cleared) and LCD segment output SEG31. |
| 74 | RE6/COM3 | bidirectional | PORTE digital I/O pin RE6 (Schmitt Trigger input) that is multiplexed with LCD common output COM3. |
| 75 | RE5/COM2 | bidirectional | PORTE digital I/O pin RE5 (Schmitt Trigger input) that is multiplexed with LCD common output COM2. |
| 76 | RE4/COM1 | bidirectional | PORTE digital I/O pin RE4 (Schmitt Trigger input) that is multiplexed with LCD common output COM1. |
| 77 | RE3/COM0 | bidirectional | PORTE digital I/O pin RE3 (Schmitt Trigger input) that is multiplexed with LCD common output COM0. |
| 78 | LCDBIAS3 | input | BIAS3 analog input for the LCD module. |
| 79 | RH0/SEG47 | bidirectional | PORTH digital I/O pin RH0 (Schmitt Trigger input) that is multiplexed with LCD segment output SEG47. |
| 80 | RH1/SEG46 | bidirectional | PORTH digital I/O pin RH1 (Schmitt Trigger input) that is multiplexed with LCD segment output SEG46. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-80(12x12) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 80 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | 2 | 3.6 | V | 4 |
CAD (KiCad official)
- Symbol:
PIC18F87J90-I - Footprint:
Package_QFP:TQFP-80_12x12mm_P0.5mm - 3D model: TQFP-80(12x12) (KiCad packages3D, STEP)
- 3D model files:
pic18f87j90-i-etched.step/pic18f87j90-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f87j90-i.step/pic18f87j90-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (450 pp, sha256
877c4ea4fe624689, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).