Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18F87J10T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-80(12x12)
PIC18F87J10T-I from Microchip Tech, in a TQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RH2/A18 | bidirectional | Digital I/O with Schmitt Trigger input; external memory address line A18 when the external bus is enabled. |
| 2 | RH3/A19 | bidirectional | Digital I/O with Schmitt Trigger input; external memory address line A19 when the external bus is enabled. |
| 3 | RE1/AD9/WR/P2C | bidirectional | Digital I/O with Schmitt Trigger input; external memory AD9, Parallel Slave Port write control input, or ECCP2 PWM output C. |
| 4 | RE0/AD8/RD/P2D | bidirectional | Digital I/O with Schmitt Trigger input; external memory AD8, Parallel Slave Port read control input, or ECCP2 PWM output D. |
| 5 | RG0/ECCP3/P3A | bidirectional | Digital I/O, tolerates 5.5V; ECCP3 capture input, compare output or PWM output, or ECCP3 PWM output A. |
| 6 | RG1/TX2/CK2 | bidirectional | Digital I/O, tolerates 5.5V; EUSART2 asynchronous transmit or synchronous clock. |
| 7 | RG2/RX2/DT2 | bidirectional | Digital I/O, tolerates 5.5V; EUSART2 asynchronous receive or synchronous data. |
| 8 | RG3/CCP4/P3D | bidirectional | Digital I/O, tolerates 5.5V; CCP4 capture/compare/PWM output or ECCP3 PWM output D. |
| 9 | MCLR | input | Master Clear (Reset) input; active-low Reset to the device. |
| 10 | RG4/CCP5/P1D | bidirectional | Digital I/O, tolerates 5.5V; CCP5 capture/compare/PWM output or ECCP1 PWM output D. |
| 11 | VSS | power_in | Ground reference for logic and I/O pins. |
| 12 | VDDCORE/VCAP | power_in | Core logic power supply when the regulator is disabled, or external filter capacitor connection when the regulator is enabled. |
| 13 | RF7/SS1 | bidirectional | Digital I/O, tolerates 5.5V; SPI slave select input for MSSP1. |
| 14 | RF6/AN11 | bidirectional | Digital I/O with Schmitt Trigger input; analog input channel 11 and Comparator C1- input. |
| 15 | RF5/AN10/CVREF | bidirectional | Digital I/O with Schmitt Trigger input; analog input channel 10 and Comparator C1+ input, or comparator reference voltage output CVREF. |
| 16 | RF4/AN9 | bidirectional | Digital I/O with Schmitt Trigger input; analog input channel 9 and Comparator C2- input. |
| 17 | RF3/AN8 | bidirectional | Digital I/O with Schmitt Trigger input; analog input channel 8 and Comparator C2+ input. |
| 18 | RF2/AN7/C1OUT | bidirectional | Digital I/O with Schmitt Trigger input; analog input channel 7, or Comparator 1 output. |
| 19 | RH7/AN15/P1B | bidirectional | Digital I/O with Schmitt Trigger input; analog input channel 15, or ECCP1 PWM output B in the alternate assignment. |
| 20 | RH6/AN14/P1C | bidirectional | Digital I/O with Schmitt Trigger input; analog input channel 14, or ECCP1 PWM output C in the alternate assignment. |
| 21 | RH5/AN13/P3B | bidirectional | Digital I/O with Schmitt Trigger input; analog input channel 13, or ECCP3 PWM output B in the alternate assignment. |
| 22 | RH4/AN12/P3C | bidirectional | Digital I/O with Schmitt Trigger input; analog input channel 12, or ECCP3 PWM output C in the alternate assignment. |
| 23 | RF1/AN6/C2OUT | bidirectional | Digital I/O with Schmitt Trigger input; analog input channel 6, or Comparator 2 output. |
| 24 | ENVREG | input | Enable for the on-chip voltage regulator; tie to VDD to enable the regulator or to VSS to disable it. |
| 25 | AVDD | power_in | Positive supply for analog modules; must always be connected. |
| 26 | AVSS | power_in | Ground reference for analog modules; must always be connected. |
| 27 | RA3/AN3/VREF+ | bidirectional | Digital I/O; analog input channel 3, or A/D high reference voltage input VREF+. |
| 28 | RA2/AN2/VREF- | bidirectional | Digital I/O; analog input channel 2, or A/D and comparator low reference voltage input VREF-. |
| 29 | RA1/AN1 | bidirectional | Digital I/O; analog input channel 1. |
| 30 | RA0/AN0 | bidirectional | Digital I/O; analog input channel 0. |
| 31 | VSS | power_in | Ground reference for logic and I/O pins. |
| 32 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 33 | RA5/AN4 | bidirectional | Digital I/O; analog input channel 4. |
| 34 | RA4/T0CKI | bidirectional | Digital I/O with Schmitt Trigger input; Timer0 external clock input. |
| 35 | RC1/T1OSI/ECCP2/P2A | bidirectional | Digital I/O with Schmitt Trigger input; Timer1 oscillator input, or ECCP2 capture/compare/PWM output A in the default assignment. |
| 36 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O with Schmitt Trigger input; Timer1 oscillator output, or Timer1/Timer3 external clock input. |
| 37 | RC6/TX1/CK1 | bidirectional | Digital I/O with Schmitt Trigger input; EUSART1 asynchronous transmit or synchronous clock. |
| 38 | RC7/RX1/DT1 | bidirectional | Digital I/O with Schmitt Trigger input; EUSART1 asynchronous receive or synchronous data. |
| 39 | RJ4/BA0 | bidirectional | Digital I/O with Schmitt Trigger input; external memory byte address 0 control output. |
| 40 | RJ5/CE | bidirectional | Digital I/O with Schmitt Trigger input; external memory chip enable control output. |
| 41 | RJ6/LB | bidirectional | Digital I/O with Schmitt Trigger input; external memory lower byte enable control output. |
| 42 | RJ7/UB | bidirectional | Digital I/O with Schmitt Trigger input; external memory upper byte enable control output. |
| 43 | RC2/ECCP1/P1A | bidirectional | Digital I/O with Schmitt Trigger input; ECCP1 capture/compare/PWM output or ECCP1 PWM output A. |
| 44 | RC3/SCK1/SCL1 | bidirectional | Digital I/O with Schmitt Trigger input; MSSP1 SPI clock or I2C clock. |
| 45 | RC4/SDI1/SDA1 | bidirectional | Digital I/O with Schmitt Trigger input; MSSP1 SPI data in or I2C data. |
| 46 | RC5/SDO1 | bidirectional | Digital I/O with Schmitt Trigger input; MSSP1 SPI data out. |
| 47 | RB7/KBI3/PGD | bidirectional | Digital I/O, tolerates 5.5V; interrupt-on-change input and ICSP/ICD programming data pin. |
| 48 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 49 | OSC1/CLKI | input | Oscillator crystal input or external clock source input. |
| 50 | OSC2/CLKO | output | Oscillator crystal output; in RC mode it outputs CLKO at 1/4 the OSC1 frequency. |
| 51 | VSS | power_in | Ground reference for logic and I/O pins. |
| 52 | RB6/KBI2/PGC | bidirectional | Digital I/O, tolerates 5.5V; interrupt-on-change input and ICSP/ICD programming clock pin. |
| 53 | RB5/KBI1 | bidirectional | Digital I/O with TTL input and weak pull-up; interrupt-on-change pin. |
| 54 | RB4/KBI0 | bidirectional | Digital I/O with TTL input and weak pull-up; interrupt-on-change pin. |
| 55 | RB3/INT3/ECCP2/P2A | bidirectional | Digital I/O with TTL input; external interrupt 3, or ECCP2 PWM output A in the alternate assignment when CCP2MX is cleared. |
| 56 | RB2/INT2 | bidirectional | Digital I/O with TTL input and weak pull-up; external interrupt 2. |
| 57 | RB1/INT1 | bidirectional | Digital I/O with TTL input and weak pull-up; external interrupt 1. |
| 58 | RB0/INT0/FLT0 | bidirectional | Digital I/O with TTL input and weak pull-up; external interrupt 0, or ECCP1/2/3 Fault input. |
| 59 | RJ3/WRH | bidirectional | Digital I/O with Schmitt Trigger input; external memory write high byte control output. |
| 60 | RJ2/WRL | bidirectional | Digital I/O with Schmitt Trigger input; external memory write low byte control output. |
| 61 | RJ1/OE | bidirectional | Digital I/O with Schmitt Trigger input; external memory output enable control output. |
| 62 | RJ0/ALE | bidirectional | Digital I/O with Schmitt Trigger input; external memory address latch enable output. |
| 63 | RD7/AD7/PSP7/SS2 | bidirectional | Digital I/O with Schmitt Trigger input; external memory AD7, Parallel Slave Port data, or MSSP2 SPI slave select. |
| 64 | RD6/AD6/PSP6/SCK2/SCL2 | bidirectional | Digital I/O with Schmitt Trigger input; external memory AD6, Parallel Slave Port data, or MSSP2 SPI/I2C clock. |
| 65 | RD5/AD5/PSP5/SDI2/SDA2 | bidirectional | Digital I/O with Schmitt Trigger input; external memory AD5, Parallel Slave Port data, or MSSP2 SPI data in / I2C data. |
| 66 | RD4/AD4/PSP4/SDO2 | bidirectional | Digital I/O with Schmitt Trigger input; external memory AD4, Parallel Slave Port data, or MSSP2 SPI data out. |
| 67 | RD3/AD3/PSP3 | bidirectional | Digital I/O with Schmitt Trigger input; external memory AD3 or Parallel Slave Port data. |
| 68 | RD2/AD2/PSP2 | bidirectional | Digital I/O with Schmitt Trigger input; external memory AD2 or Parallel Slave Port data. |
| 69 | RD1/AD1/PSP1 | bidirectional | Digital I/O with Schmitt Trigger input; external memory AD1 or Parallel Slave Port data. |
| 70 | VSS | power_in | Ground reference for logic and I/O pins. |
| 71 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 72 | RD0/AD0/PSP0 | bidirectional | Digital I/O with Schmitt Trigger input; external memory AD0 or Parallel Slave Port data. |
| 73 | RE7/AD15/ECCP2/P2A | bidirectional | Digital I/O with Schmitt Trigger input; external memory AD15, or ECCP2 PWM output A in the alternate assignment when CCP2MX is cleared. |
| 74 | RE6/AD14/P1B | bidirectional | Digital I/O with Schmitt Trigger input; external memory AD14, or ECCP1 PWM output B in the default assignment. |
| 75 | RE5/AD13/P1C | bidirectional | Digital I/O with Schmitt Trigger input; external memory AD13, or ECCP1 PWM output C in the default assignment. |
| 76 | RE4/AD12/P3B | bidirectional | Digital I/O with Schmitt Trigger input; external memory AD12, or ECCP3 PWM output B in the default assignment. |
| 77 | RE3/AD11/P3C | bidirectional | Digital I/O with Schmitt Trigger input; external memory AD11, or ECCP3 PWM output C in the default assignment. |
| 78 | RE2/AD10/CS/P2B | bidirectional | Digital I/O with Schmitt Trigger input; external memory AD10, Parallel Slave Port chip select input, or ECCP2 PWM output B. |
| 79 | RH0/A16 | bidirectional | Digital I/O with Schmitt Trigger input; external memory address line A16. |
| 80 | RH1/A17 | bidirectional | Digital I/O with Schmitt Trigger input; external memory address line A17. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-80(12x12) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 80 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage range | 2 | 3.6 | V | 3 |
CAD (KiCad official)
- Symbol:
PIC18F87J10T-I - Footprint:
Package_QFP:TQFP-80_12x12mm_P0.5mm - 3D model: TQFP-80(12x12) (KiCad packages3D, STEP)
- 3D model files:
pic18f87j10t-i-etched.step/pic18f87j10t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f87j10t-i.step/pic18f87j10t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (410 pp, sha256
eade6a1496f93bf6, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).