main
Ray
Publish 0.1.0
b12c10c
PIC18F86J15-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-80(12x12)
PIC18F86J15-I from Microchip Tech, in a TQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RH2/A18 | bidirectional | Digital I/O with 5.5V-tolerant input, or external memory address line A18 when the external bus is enabled. |
| 2 | RH3/A19 | bidirectional | Digital I/O with 5.5V-tolerant input, or external memory address line A19 when the external bus is enabled. |
| 3 | RE1/AD9/WR/P2C | bidirectional | Digital I/O (5.5V tolerant); external memory AD9, Parallel Slave Port write control input WR, or ECCP2 PWM output C. |
| 4 | RE0/AD8/RD/P2D | bidirectional | Digital I/O (5.5V tolerant); external memory AD8, Parallel Slave Port read control input RD, or ECCP2 PWM output D. |
| 5 | RG0/ECCP3/P3A | bidirectional | Digital I/O (5.5V tolerant); ECCP3 capture input/compare output/PWM output, or ECCP3 PWM output A. |
| 6 | RG1/TX2/CK2 | bidirectional | Digital I/O (5.5V tolerant); EUSART2 asynchronous transmit or synchronous clock. |
| 7 | RG2/RX2/DT2 | bidirectional | Digital I/O (5.5V tolerant); EUSART2 asynchronous receive or synchronous data. |
| 8 | RG3/CCP4/P3D | bidirectional | Digital I/O (5.5V tolerant); CCP4 capture/compare/PWM output, or ECCP3 PWM output D. |
| 9 | MCLR | input | Master Clear (Reset) input; active-low Reset to the device. |
| 10 | RG4/CCP5/P1D | bidirectional | Digital I/O (5.5V tolerant); CCP5 capture/compare/PWM output, or ECCP1 PWM output D. |
| 11 | VSS | power_in | Ground reference for logic and I/O pins. |
| 12 | VDDCORE/VCAP | power_in | Core logic power supply when the regulator is disabled (VDDCORE); external filter capacitor connection, 10 µF to ground, when the regulator is enabled (VCAP). |
| 13 | RF7/SS1 | bidirectional | Digital I/O (5.5V tolerant); SPI slave select input for MSSP1. |
| 14 | RF6/AN11 | bidirectional | Digital I/O (input limited to VDD); analog input 11 (A/D and Comparator C1-). |
| 15 | RF5/AN10/CVREF | bidirectional | Digital I/O (input limited to VDD); analog input 10 (A/D and Comparator C1+) or comparator voltage reference output CVREF. |
| 16 | RF4/AN9 | bidirectional | Digital I/O (input limited to VDD); analog input 9 (Comparator C2-). |
| 17 | RF3/AN8 | bidirectional | Digital I/O (input limited to VDD); analog input 8 (Comparator C2+). |
| 18 | RF2/AN7/C1OUT | bidirectional | Digital I/O (input limited to VDD); analog input 7 or Comparator 1 output. |
| 19 | RH7/AN15/P1B | bidirectional | Digital I/O (input limited to VDD); analog input 15 or alternate ECCP1 PWM output B (when ECCPMX is cleared). |
| 20 | RH6/AN14/P1C | bidirectional | Digital I/O (input limited to VDD); analog input 14 or alternate ECCP1 PWM output C (when ECCPMX is cleared). |
| 21 | RH5/AN13/P3B | bidirectional | Digital I/O (input limited to VDD); analog input 13 or alternate ECCP3 PWM output B (when ECCPMX is cleared). |
| 22 | RH4/AN12/P3C | bidirectional | Digital I/O (input limited to VDD); analog input 12 or alternate ECCP3 PWM output C (when ECCPMX is cleared). |
| 23 | RF1/AN6/C2OUT | bidirectional | Digital I/O (input limited to VDD); analog input 6 or Comparator 2 output. |
| 24 | ENVREG | input | Enable for the on-chip voltage regulator; must be tied directly to VDD to enable or to ground to disable. |
| 25 | AVDD | power_in | Positive supply for analog modules; must always be connected. |
| 26 | AVSS | power_in | Ground reference for analog modules; must always be connected. |
| 27 | RA3/AN3/VREF+ | bidirectional | Digital I/O (input limited to VDD); analog input 3 or A/D high reference voltage input VREF+. |
| 28 | RA2/AN2/VREF- | bidirectional | Digital I/O (input limited to VDD); analog input 2 or A/D and comparator low reference voltage input VREF-. |
| 29 | RA1/AN1 | bidirectional | Digital I/O (input limited to VDD); analog input 1. |
| 30 | RA0/AN0 | bidirectional | Digital I/O (input limited to VDD); analog input 0. |
| 31 | VSS | power_in | Ground reference for logic and I/O pins. |
| 32 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 33 | RA5/AN4 | bidirectional | Digital I/O (input limited to VDD); analog input 4. |
| 34 | RA4/T0CKI | bidirectional | Digital I/O with Schmitt Trigger input; Timer0 external clock input. |
| 35 | RC1/T1OSI/ECCP2/P2A | bidirectional | Digital I/O (input limited to VDD); Timer1 oscillator input, or ECCP2 capture/compare/PWM output A (default ECCP2 pin when CCP2MX is set). |
| 36 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O (input limited to VDD); Timer1 oscillator output or Timer1/Timer3 external clock input. |
| 37 | RC6/TX1/CK1 | bidirectional | Digital I/O (5.5V tolerant); EUSART1 asynchronous transmit or synchronous clock. |
| 38 | RC7/RX1/DT1 | bidirectional | Digital I/O (5.5V tolerant); EUSART1 asynchronous receive or synchronous data. |
| 39 | RJ4/BA0 | bidirectional | Digital I/O (5.5V tolerant); external memory byte address 0 control output. |
| 40 | RJ5/CE | bidirectional | Digital I/O (5.5V tolerant); external memory chip enable control output. |
| 41 | RJ6/LB | bidirectional | Digital I/O (5.5V tolerant); external memory lower byte enable control output. |
| 42 | RJ7/UB | bidirectional | Digital I/O (5.5V tolerant); external memory upper byte enable control output. |
| 43 | RC2/ECCP1/P1A | bidirectional | Digital I/O (5.5V tolerant); ECCP1 capture/compare/PWM output or ECCP1 PWM output A. |
| 44 | RC3/SCK1/SCL1 | bidirectional | Digital I/O (5.5V tolerant); MSSP1 SPI clock or I2C clock. |
| 45 | RC4/SDI1/SDA1 | bidirectional | Digital I/O (5.5V tolerant); MSSP1 SPI data input or I2C data. |
| 46 | RC5/SDO1 | bidirectional | Digital I/O (5.5V tolerant); MSSP1 SPI data output. |
| 47 | RB7/KBI3/PGD | bidirectional | Digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared); interrupt-on-change KBI3 and ICSP/ICD data pin PGD. |
| 48 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 49 | OSC1/CLKI | input | Oscillator crystal or external clock source input. |
| 50 | OSC2/CLKO | output | Oscillator crystal output connecting to the crystal or resonator; in EC mode it outputs the OSC1 frequency divided by 4 (CLKO). |
| 51 | VSS | power_in | Ground reference for logic and I/O pins. |
| 52 | RB6/KBI2/PGC | bidirectional | Digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared); interrupt-on-change KBI2 and ICSP/ICD clock pin PGC. |
| 53 | RB5/KBI1 | bidirectional | Digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared); interrupt-on-change KBI1. |
| 54 | RB4/KBI0 | bidirectional | Digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared); interrupt-on-change KBI0. |
| 55 | RB3/INT3/ECCP2/P2A | bidirectional | Digital I/O (5.5V tolerant); external interrupt 3, or alternate ECCP2 capture/compare/PWM output A when CCP2MX is cleared in Extended Microcontroller mode. |
| 56 | RB2/INT2 | bidirectional | Digital I/O (5.5V tolerant); external interrupt 2. |
| 57 | RB1/INT1 | bidirectional | Digital I/O (5.5V tolerant); external interrupt 1. |
| 58 | RB0/INT0/FLT0 | bidirectional | Digital I/O (5.5V tolerant); external interrupt 0 or ECCP1/2/3 Fault input. |
| 59 | RJ3/WRH | bidirectional | Digital I/O (5.5V tolerant); external memory write high byte control output. |
| 60 | RJ2/WRL | bidirectional | Digital I/O (5.5V tolerant); external memory write low byte control output. |
| 61 | RJ1/OE | bidirectional | Digital I/O (5.5V tolerant); external memory output enable control output. |
| 62 | RJ0/ALE | bidirectional | Digital I/O (5.5V tolerant); external memory address latch enable control output. |
| 63 | RD7/AD7/PSP7/SS2 | bidirectional | Digital I/O (5.5V tolerant); external memory AD7, Parallel Slave Port data, or MSSP2 SPI slave select input. |
| 64 | RD6/AD6/PSP6/SCK2/SCL2 | bidirectional | Digital I/O (5.5V tolerant); external memory AD6, Parallel Slave Port data, or MSSP2 SPI/I2C clock. |
| 65 | RD5/AD5/PSP5/SDI2/SDA2 | bidirectional | Digital I/O (5.5V tolerant); external memory AD5, Parallel Slave Port data, or MSSP2 SPI data input / I2C data. |
| 66 | RD4/AD4/PSP4/SDO2 | bidirectional | Digital I/O (5.5V tolerant); external memory AD4, Parallel Slave Port data, or MSSP2 SPI data output. |
| 67 | RD3/AD3/PSP3 | bidirectional | Digital I/O (5.5V tolerant); external memory AD3 or Parallel Slave Port data. |
| 68 | RD2/AD2/PSP2 | bidirectional | Digital I/O (5.5V tolerant); external memory AD2 or Parallel Slave Port data. |
| 69 | RD1/AD1/PSP1 | bidirectional | Digital I/O (5.5V tolerant); external memory AD1 or Parallel Slave Port data. |
| 70 | VSS | power_in | Ground reference for logic and I/O pins. |
| 71 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 72 | RD0/AD0/PSP0 | bidirectional | Digital I/O (5.5V tolerant); external memory AD0 or Parallel Slave Port data. |
| 73 | RE7/AD15/ECCP2/P2A | bidirectional | Digital I/O (5.5V tolerant); external memory AD15, ECCP2 capture/compare output, or ECCP2 PWM output A (alternate when CCP2MX is cleared). |
| 74 | RE6/AD14/P1B | bidirectional | Digital I/O (5.5V tolerant); external memory AD14 or ECCP1 PWM output B (default assignment when ECCPMX is set). |
| 75 | RE5/AD13/P1C | bidirectional | Digital I/O (5.5V tolerant); external memory AD13 or ECCP1 PWM output C (default assignment when ECCPMX is set). |
| 76 | RE4/AD12/P3B | bidirectional | Digital I/O (5.5V tolerant); external memory AD12 or ECCP3 PWM output B (default assignment when ECCPMX is set). |
| 77 | RE3/AD11/P3C | bidirectional | Digital I/O (5.5V tolerant); external memory AD11 or ECCP3 PWM output C (default assignment when ECCPMX is set). |
| 78 | RE2/AD10/CS/P2B | bidirectional | Digital I/O (5.5V tolerant); external memory AD10, Parallel Slave Port chip select input CS, or ECCP2 PWM output B. |
| 79 | RH0/A16 | bidirectional | Digital I/O with 5.5V-tolerant input, or external memory address line A16 when the external bus is enabled. |
| 80 | RH1/A17 | bidirectional | Digital I/O with 5.5V-tolerant input, or external memory address line A17 when the external bus is enabled. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-80(12x12) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 80 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | 2 | 3.6 | V | 3 | |||
| Operating frequency (DC, 40 MHz, 80-pin TQFP device column) | 40 | MHz | Lower bound printed as DC; left null | 9 | |||
| Input voltage tolerated on digital-only pins | 5.5 | V | PORTB<7:0>, PORTC<7:2>, PORTD<7:0>, PORTE<7:0>, PORTF<7>, PORTG<4:0>, PORTH<3:0>, PORTJ<7:0> | 128 | |||
| VCAP/VDDCORE capacitor (regulator enabled) | 10 | µF | Regulator enabled; ceramic or tantalum from VCAP/VDDCORE to ground; must not be tied to VDD | 31 | |||
| VCAP/VDDCORE capacitor ESR | 5 | Ω | Regulator enabled; low-ESR capacitor required (<5 Ω) | 31 | |||
| MCLR series resistor R1 | R1 | 10 | kΩ | Recommended; suggested starting value 10 kΩ; MCLR VIH/VIL must still be met | 30 | ||
| MCLR current-limit resistor R2 | R2 | 470 | Ω | Limits current from external capacitor into MCLR in ESD/EOS event; MCLR VIH/VIL must still be met | 30 |
CAD (KiCad official)
- Symbol:
PIC18F86J15-I - Footprint:
Package_QFP:TQFP-80_12x12mm_P0.5mm - 3D model: TQFP-80(12x12) (KiCad packages3D, STEP)
- 3D model files:
pic18f86j15-i-etched.step/pic18f86j15-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f86j15-i.step/pic18f86j15-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (410 pp, sha256
eade6a1496f93bf6, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC18F86J15-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-80(12x12)
PIC18F86J15-I from Microchip Tech, in a TQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RH2/A18 | bidirectional | Digital I/O with 5.5V-tolerant input, or external memory address line A18 when the external bus is enabled. |
| 2 | RH3/A19 | bidirectional | Digital I/O with 5.5V-tolerant input, or external memory address line A19 when the external bus is enabled. |
| 3 | RE1/AD9/WR/P2C | bidirectional | Digital I/O (5.5V tolerant); external memory AD9, Parallel Slave Port write control input WR, or ECCP2 PWM output C. |
| 4 | RE0/AD8/RD/P2D | bidirectional | Digital I/O (5.5V tolerant); external memory AD8, Parallel Slave Port read control input RD, or ECCP2 PWM output D. |
| 5 | RG0/ECCP3/P3A | bidirectional | Digital I/O (5.5V tolerant); ECCP3 capture input/compare output/PWM output, or ECCP3 PWM output A. |
| 6 | RG1/TX2/CK2 | bidirectional | Digital I/O (5.5V tolerant); EUSART2 asynchronous transmit or synchronous clock. |
| 7 | RG2/RX2/DT2 | bidirectional | Digital I/O (5.5V tolerant); EUSART2 asynchronous receive or synchronous data. |
| 8 | RG3/CCP4/P3D | bidirectional | Digital I/O (5.5V tolerant); CCP4 capture/compare/PWM output, or ECCP3 PWM output D. |
| 9 | MCLR | input | Master Clear (Reset) input; active-low Reset to the device. |
| 10 | RG4/CCP5/P1D | bidirectional | Digital I/O (5.5V tolerant); CCP5 capture/compare/PWM output, or ECCP1 PWM output D. |
| 11 | VSS | power_in | Ground reference for logic and I/O pins. |
| 12 | VDDCORE/VCAP | power_in | Core logic power supply when the regulator is disabled (VDDCORE); external filter capacitor connection, 10 µF to ground, when the regulator is enabled (VCAP). |
| 13 | RF7/SS1 | bidirectional | Digital I/O (5.5V tolerant); SPI slave select input for MSSP1. |
| 14 | RF6/AN11 | bidirectional | Digital I/O (input limited to VDD); analog input 11 (A/D and Comparator C1-). |
| 15 | RF5/AN10/CVREF | bidirectional | Digital I/O (input limited to VDD); analog input 10 (A/D and Comparator C1+) or comparator voltage reference output CVREF. |
| 16 | RF4/AN9 | bidirectional | Digital I/O (input limited to VDD); analog input 9 (Comparator C2-). |
| 17 | RF3/AN8 | bidirectional | Digital I/O (input limited to VDD); analog input 8 (Comparator C2+). |
| 18 | RF2/AN7/C1OUT | bidirectional | Digital I/O (input limited to VDD); analog input 7 or Comparator 1 output. |
| 19 | RH7/AN15/P1B | bidirectional | Digital I/O (input limited to VDD); analog input 15 or alternate ECCP1 PWM output B (when ECCPMX is cleared). |
| 20 | RH6/AN14/P1C | bidirectional | Digital I/O (input limited to VDD); analog input 14 or alternate ECCP1 PWM output C (when ECCPMX is cleared). |
| 21 | RH5/AN13/P3B | bidirectional | Digital I/O (input limited to VDD); analog input 13 or alternate ECCP3 PWM output B (when ECCPMX is cleared). |
| 22 | RH4/AN12/P3C | bidirectional | Digital I/O (input limited to VDD); analog input 12 or alternate ECCP3 PWM output C (when ECCPMX is cleared). |
| 23 | RF1/AN6/C2OUT | bidirectional | Digital I/O (input limited to VDD); analog input 6 or Comparator 2 output. |
| 24 | ENVREG | input | Enable for the on-chip voltage regulator; must be tied directly to VDD to enable or to ground to disable. |
| 25 | AVDD | power_in | Positive supply for analog modules; must always be connected. |
| 26 | AVSS | power_in | Ground reference for analog modules; must always be connected. |
| 27 | RA3/AN3/VREF+ | bidirectional | Digital I/O (input limited to VDD); analog input 3 or A/D high reference voltage input VREF+. |
| 28 | RA2/AN2/VREF- | bidirectional | Digital I/O (input limited to VDD); analog input 2 or A/D and comparator low reference voltage input VREF-. |
| 29 | RA1/AN1 | bidirectional | Digital I/O (input limited to VDD); analog input 1. |
| 30 | RA0/AN0 | bidirectional | Digital I/O (input limited to VDD); analog input 0. |
| 31 | VSS | power_in | Ground reference for logic and I/O pins. |
| 32 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 33 | RA5/AN4 | bidirectional | Digital I/O (input limited to VDD); analog input 4. |
| 34 | RA4/T0CKI | bidirectional | Digital I/O with Schmitt Trigger input; Timer0 external clock input. |
| 35 | RC1/T1OSI/ECCP2/P2A | bidirectional | Digital I/O (input limited to VDD); Timer1 oscillator input, or ECCP2 capture/compare/PWM output A (default ECCP2 pin when CCP2MX is set). |
| 36 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O (input limited to VDD); Timer1 oscillator output or Timer1/Timer3 external clock input. |
| 37 | RC6/TX1/CK1 | bidirectional | Digital I/O (5.5V tolerant); EUSART1 asynchronous transmit or synchronous clock. |
| 38 | RC7/RX1/DT1 | bidirectional | Digital I/O (5.5V tolerant); EUSART1 asynchronous receive or synchronous data. |
| 39 | RJ4/BA0 | bidirectional | Digital I/O (5.5V tolerant); external memory byte address 0 control output. |
| 40 | RJ5/CE | bidirectional | Digital I/O (5.5V tolerant); external memory chip enable control output. |
| 41 | RJ6/LB | bidirectional | Digital I/O (5.5V tolerant); external memory lower byte enable control output. |
| 42 | RJ7/UB | bidirectional | Digital I/O (5.5V tolerant); external memory upper byte enable control output. |
| 43 | RC2/ECCP1/P1A | bidirectional | Digital I/O (5.5V tolerant); ECCP1 capture/compare/PWM output or ECCP1 PWM output A. |
| 44 | RC3/SCK1/SCL1 | bidirectional | Digital I/O (5.5V tolerant); MSSP1 SPI clock or I2C clock. |
| 45 | RC4/SDI1/SDA1 | bidirectional | Digital I/O (5.5V tolerant); MSSP1 SPI data input or I2C data. |
| 46 | RC5/SDO1 | bidirectional | Digital I/O (5.5V tolerant); MSSP1 SPI data output. |
| 47 | RB7/KBI3/PGD | bidirectional | Digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared); interrupt-on-change KBI3 and ICSP/ICD data pin PGD. |
| 48 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 49 | OSC1/CLKI | input | Oscillator crystal or external clock source input. |
| 50 | OSC2/CLKO | output | Oscillator crystal output connecting to the crystal or resonator; in EC mode it outputs the OSC1 frequency divided by 4 (CLKO). |
| 51 | VSS | power_in | Ground reference for logic and I/O pins. |
| 52 | RB6/KBI2/PGC | bidirectional | Digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared); interrupt-on-change KBI2 and ICSP/ICD clock pin PGC. |
| 53 | RB5/KBI1 | bidirectional | Digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared); interrupt-on-change KBI1. |
| 54 | RB4/KBI0 | bidirectional | Digital I/O (5.5V tolerant, weak pull-up when RBPU is cleared); interrupt-on-change KBI0. |
| 55 | RB3/INT3/ECCP2/P2A | bidirectional | Digital I/O (5.5V tolerant); external interrupt 3, or alternate ECCP2 capture/compare/PWM output A when CCP2MX is cleared in Extended Microcontroller mode. |
| 56 | RB2/INT2 | bidirectional | Digital I/O (5.5V tolerant); external interrupt 2. |
| 57 | RB1/INT1 | bidirectional | Digital I/O (5.5V tolerant); external interrupt 1. |
| 58 | RB0/INT0/FLT0 | bidirectional | Digital I/O (5.5V tolerant); external interrupt 0 or ECCP1/2/3 Fault input. |
| 59 | RJ3/WRH | bidirectional | Digital I/O (5.5V tolerant); external memory write high byte control output. |
| 60 | RJ2/WRL | bidirectional | Digital I/O (5.5V tolerant); external memory write low byte control output. |
| 61 | RJ1/OE | bidirectional | Digital I/O (5.5V tolerant); external memory output enable control output. |
| 62 | RJ0/ALE | bidirectional | Digital I/O (5.5V tolerant); external memory address latch enable control output. |
| 63 | RD7/AD7/PSP7/SS2 | bidirectional | Digital I/O (5.5V tolerant); external memory AD7, Parallel Slave Port data, or MSSP2 SPI slave select input. |
| 64 | RD6/AD6/PSP6/SCK2/SCL2 | bidirectional | Digital I/O (5.5V tolerant); external memory AD6, Parallel Slave Port data, or MSSP2 SPI/I2C clock. |
| 65 | RD5/AD5/PSP5/SDI2/SDA2 | bidirectional | Digital I/O (5.5V tolerant); external memory AD5, Parallel Slave Port data, or MSSP2 SPI data input / I2C data. |
| 66 | RD4/AD4/PSP4/SDO2 | bidirectional | Digital I/O (5.5V tolerant); external memory AD4, Parallel Slave Port data, or MSSP2 SPI data output. |
| 67 | RD3/AD3/PSP3 | bidirectional | Digital I/O (5.5V tolerant); external memory AD3 or Parallel Slave Port data. |
| 68 | RD2/AD2/PSP2 | bidirectional | Digital I/O (5.5V tolerant); external memory AD2 or Parallel Slave Port data. |
| 69 | RD1/AD1/PSP1 | bidirectional | Digital I/O (5.5V tolerant); external memory AD1 or Parallel Slave Port data. |
| 70 | VSS | power_in | Ground reference for logic and I/O pins. |
| 71 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 72 | RD0/AD0/PSP0 | bidirectional | Digital I/O (5.5V tolerant); external memory AD0 or Parallel Slave Port data. |
| 73 | RE7/AD15/ECCP2/P2A | bidirectional | Digital I/O (5.5V tolerant); external memory AD15, ECCP2 capture/compare output, or ECCP2 PWM output A (alternate when CCP2MX is cleared). |
| 74 | RE6/AD14/P1B | bidirectional | Digital I/O (5.5V tolerant); external memory AD14 or ECCP1 PWM output B (default assignment when ECCPMX is set). |
| 75 | RE5/AD13/P1C | bidirectional | Digital I/O (5.5V tolerant); external memory AD13 or ECCP1 PWM output C (default assignment when ECCPMX is set). |
| 76 | RE4/AD12/P3B | bidirectional | Digital I/O (5.5V tolerant); external memory AD12 or ECCP3 PWM output B (default assignment when ECCPMX is set). |
| 77 | RE3/AD11/P3C | bidirectional | Digital I/O (5.5V tolerant); external memory AD11 or ECCP3 PWM output C (default assignment when ECCPMX is set). |
| 78 | RE2/AD10/CS/P2B | bidirectional | Digital I/O (5.5V tolerant); external memory AD10, Parallel Slave Port chip select input CS, or ECCP2 PWM output B. |
| 79 | RH0/A16 | bidirectional | Digital I/O with 5.5V-tolerant input, or external memory address line A16 when the external bus is enabled. |
| 80 | RH1/A17 | bidirectional | Digital I/O with 5.5V-tolerant input, or external memory address line A17 when the external bus is enabled. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-80(12x12) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 80 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | | 2 | | 3.6 | V | | 3 |
| Operating frequency (DC, 40 MHz, 80-pin TQFP device column) | | | | 40 | MHz | Lower bound printed as DC; left null | 9 |
| Input voltage tolerated on digital-only pins | | | | 5.5 | V | PORTB<7:0>, PORTC<7:2>, PORTD<7:0>, PORTE<7:0>, PORTF<7>, PORTG<4:0>, PORTH<3:0>, PORTJ<7:0> | 128 |
| VCAP/VDDCORE capacitor (regulator enabled) | | | 10 | | µF | Regulator enabled; ceramic or tantalum from VCAP/VDDCORE to ground; must not be tied to VDD | 31 |
| VCAP/VDDCORE capacitor ESR | | | | 5 | Ω | Regulator enabled; low-ESR capacitor required (<5 Ω) | 31 |
| MCLR series resistor R1 | R1 | | | 10 | kΩ | Recommended; suggested starting value 10 kΩ; MCLR VIH/VIL must still be met | 30 |
| MCLR current-limit resistor R2 | R2 | | | 470 | Ω | Limits current from external capacitor into MCLR in ESD/EOS event; MCLR VIH/VIL must still be met | 30 |
## CAD (KiCad official)
- Symbol: `PIC18F86J15-I`
- Footprint: `Package_QFP:TQFP-80_12x12mm_P0.5mm`
- 3D model: TQFP-80(12x12) (KiCad packages3D, STEP)
- 3D model files: `pic18f86j15-i-etched.step` / `pic18f86j15-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic18f86j15-i.step` / `pic18f86j15-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic18f86j15-i-datasheet.pdf) (410 pp, sha256 `eade6a1496f93bf6`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic18f86j15-i-datasheet.pdf)