3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18F85K22-I
Microchip Tech · Pre-ordered MCUs · TQFP-80(12x12)
PIC18F85K22-I from Microchip Tech, in a TQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RH2/AN21/A18 | bidirectional | Digital I/O, Analog Input 21 and External Address/Data 18 (multiplexed). |
| 2 | RH3/AN20/A19 | bidirectional | Digital I/O, Analog Input 20 and External Address/Data 19 (multiplexed). |
| 3 | RE1/P2C/WR/AD9 | bidirectional | Digital I/O, ECCP2 PWM Output C, Parallel Slave Port write strobe and External Memory Address/Data 9. |
| 4 | RE0/P2D/RD/AD8 | bidirectional | Digital I/O, ECCP2 PWM Output D, Parallel Slave Port read strobe and External Memory Address/Data 8. |
| 5 | RG0/ECCP3/P3A | bidirectional | Digital I/O, ECCP3 capture/compare input or output and ECCP3 PWM Output A. |
| 6 | RG1/TX2/CK2/AN19/C3OUT | bidirectional | Digital I/O, EUSART2 asynchronous transmit or synchronous clock, Analog Input 19 and Comparator 3 output. |
| 7 | RG2/RX2/DT2/AN18/C3INA | bidirectional | Digital I/O, EUSART2 asynchronous receive or synchronous data, Analog Input 18 and Comparator 3 Input A. |
| 8 | RG3/CCP4/AN17/P3D/C3INB | bidirectional | Digital I/O, CCP4 capture/compare/PWM, Analog Input 17, ECCP3 PWM Output D and Comparator 3 Input B. |
| 9 | MCLR/RG5 | input | Master Clear input or programming voltage input, active-low Reset to the device; RG5 is general purpose input-only when MCLR is disabled. |
| 10 | RG4/RTCC/T7CKI/T5G/CCP5/AN16/P1D/C3INC | bidirectional | Digital I/O, RTCC output, Timer7 clock input, Timer5 gate input, CCP5, Analog Input 16, ECCP1 PWM Output D and Comparator 3 Input C. |
| 11 | VSS | power_in | Ground reference for logic and I/O pins. |
| 12 | VDDCORE/VCAP | power_in | Core logic power or external filter capacitor connection; a 10 µF capacitor to ground is required when the regulator is enabled. |
| 13 | RF7/AN5/SS1 | bidirectional | Digital I/O, Analog Input 5 and SPI1 slave select input. |
| 14 | RF6/AN11/C1INA | bidirectional | Digital I/O, Analog Input 11 and Comparator 1 Input A. |
| 15 | RF5/AN10/C1INB | bidirectional | Digital I/O, Analog Input 10 and Comparator 1 Input B. |
| 16 | RF4/AN9/C2INA | bidirectional | Digital I/O, Analog Input 9 and Comparator 2 Input A. |
| 17 | RF3/AN8/C2INB/CTMUI | bidirectional | Digital I/O, Analog Input 8, Comparator 2 Input B and CTMU pulse generator charger for the C2INB input. |
| 18 | RF2/AN7/C1OUT | bidirectional | Digital I/O, Analog Input 7 and Comparator 1 output. |
| 19 | RH7/CCP6/P1B/AN15 | bidirectional | Digital I/O, CCP6 capture/compare/PWM, ECCP1 PWM Output B and Analog Input 15. |
| 20 | RH6/CCP7/P1C/AN14/C1INC | bidirectional | Digital I/O, CCP7 capture/compare/PWM, ECCP1 PWM Output C, Analog Input 14 and Comparator 1 Input C. |
| 21 | RH5/CCP8/P3B/AN13/C2IND | bidirectional | Digital I/O, CCP8 capture/compare/PWM, ECCP3 PWM Output B, Analog Input 13 and Comparator 2 Input D. |
| 22 | RH4/CCP9/P3C/AN12/C2INC | bidirectional | Digital I/O, CCP9 capture/compare/PWM, ECCP3 PWM Output C, Analog Input 12 and Comparator 2 Input C. |
| 23 | RF1/AN6/C2OUT/CTDIN | bidirectional | Digital I/O, Analog Input 6, Comparator 2 output and CTMU pulse delay input. |
| 24 | ENVREG | input | Enable for on-chip voltage regulator, tied to VDD to enable or to ground to disable. |
| 25 | AVDD | power_in | Positive supply for analog modules. |
| 26 | AVSS | power_in | Ground reference for analog modules. |
| 27 | RA3/AN3/VREF+ | bidirectional | Digital I/O, Analog Input 3 and A/D reference voltage (high) input. |
| 28 | RA2/AN2/VREF- | bidirectional | Digital I/O, Analog Input 2 and A/D reference voltage (low) input. |
| 29 | RA1/AN1 | bidirectional | Digital I/O and Analog Input 1. |
| 30 | RA0/AN0/ULPWU | bidirectional | Digital I/O, Analog Input 0 and Ultra Low-Power Wake-up input. |
| 31 | VSS | power_in | Ground reference for logic and I/O pins. |
| 32 | VDD | power_in | Positive supply for logic and I/O pins. |
| 33 | RA5/AN4/T1CKI/T3G/HLVDIN | bidirectional | Digital I/O, Analog Input 4, Timer1 clock input, Timer3 gate input and High/Low-Voltage Detect input. |
| 34 | RA4/T0CKI | bidirectional | Digital I/O and Timer0 external clock input. |
| 35 | RC1/SOSCI/ECCP2/P2A | bidirectional | Digital I/O, SOSC oscillator input, ECCP2 capture/compare/PWM and Enhanced PWM Output A. |
| 36 | RC0/SOSCO/SCKLI | bidirectional | Digital I/O, SOSC oscillator output and digital SOSC clock input. |
| 37 | RC6/TX1/CK1 | bidirectional | Digital I/O, EUSART1 asynchronous transmit or synchronous clock. |
| 38 | RC7/RX1/DT1 | bidirectional | Digital I/O, EUSART1 asynchronous receive or synchronous data. |
| 39 | RJ4/BA0 | bidirectional | Digital I/O and External Memory Byte Address 0 control output. |
| 40 | RJ5/CE | bidirectional | Digital I/O and External memory chip enable control output. |
| 41 | RJ6/LB | bidirectional | Digital I/O and External memory lower byte enable control output. |
| 42 | RJ7/UB | bidirectional | Digital I/O and External memory upper byte enable control output. |
| 43 | RC2/ECCP1/P1A | bidirectional | Digital I/O, ECCP1 capture/compare/PWM and Enhanced PWM1 Output A. |
| 44 | RC3/SCK1/SCL1 | bidirectional | Digital I/O, MSSP1 SPI clock input/output and I2C clock input/output. |
| 45 | RC4/SDI1/SDA1 | bidirectional | Digital I/O, MSSP1 SPI data input and I2C data I/O. |
| 46 | RC5/SDO1 | bidirectional | Digital I/O and MSSP1 SPI data output. |
| 47 | RB7/KBI3/PGD | bidirectional | Digital I/O, interrupt-on-change pin and ICSP/ICD data pin. |
| 48 | VDD | power_in | Positive supply for logic and I/O pins. |
| 49 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input, or general purpose I/O pin RA7 in internal oscillator modes. |
| 50 | OSC2/CLKO/RA6 | output | Oscillator crystal or clock output (CLKO at FOSC/4), or general purpose I/O pin RA6 in internal oscillator modes. |
| 51 | VSS | power_in | Ground reference for logic and I/O pins. |
| 52 | RB6/KBI2/PGC | bidirectional | Digital I/O, interrupt-on-change pin and ICSP/ICD programming clock pin. |
| 53 | RB5/KBI1/T3CKI/T1G | bidirectional | Digital I/O, interrupt-on-change pin, Timer3 clock input and Timer1 external clock gate input. |
| 54 | RB4/KBI0 | bidirectional | Digital I/O and interrupt-on-pin change input. |
| 55 | RB3/INT3/CTED2/ECCP2/P2A | bidirectional | Digital I/O, External Interrupt 3, CTMU Edge 2 input, ECCP2 capture/compare/PWM and Enhanced PWM Output A. |
| 56 | RB2/INT2/CTED1 | bidirectional | Digital I/O, External Interrupt 2 and CTMU Edge 1 input. |
| 57 | RB1/INT1 | bidirectional | Digital I/O and External Interrupt 1 input. |
| 58 | RB0/INT0/FLT0 | bidirectional | Digital I/O, External Interrupt 0 and Enhanced PWM Fault input for ECCP1/2/3. |
| 59 | RJ3/WRH | bidirectional | Digital I/O and External memory high-byte write control. |
| 60 | RJ2/WRL | bidirectional | Digital I/O and External Memory Bus write low-byte control. |
| 61 | RJ1/OE | bidirectional | Digital I/O and External memory output enable control output. |
| 62 | RJ0/ALE | bidirectional | Digital I/O and External memory address latch enable control output. |
| 63 | RD7/SS2/PSP7/AD7 | bidirectional | Digital I/O, SPI2 slave select input, Parallel Slave Port data and External Memory Address/Data 7. |
| 64 | RD6/SCK2/SCL2/PSP6/AD6 | bidirectional | Digital I/O, SPI2 clock, I2C2 clock, Parallel Slave Port data and External Memory Address/Data 6. |
| 65 | RD5/SDI2/SDA2/PSP5/AD5 | bidirectional | Digital I/O, SPI2 data input, I2C2 data I/O, Parallel Slave Port data and External Memory Address/Data 5. |
| 66 | RD4/SDO2/PSP4/AD4 | bidirectional | Digital I/O, SPI2 data output, Parallel Slave Port data and External Memory Address/Data 4. |
| 67 | RD3/PSP3/AD3 | bidirectional | Digital I/O, Parallel Slave Port data and External Memory Address/Data 3. |
| 68 | RD2/PSP2/AD2 | bidirectional | Digital I/O, Parallel Slave Port data and External Memory Address/Data 2. |
| 69 | RD1/T5CKI/T7G/PSP1/AD1 | bidirectional | Digital I/O, Timer5 clock input, Timer7 gate input, Parallel Slave Port data and External Memory Address/Data 1. |
| 70 | VSS | power_in | Ground reference for logic and I/O pins. |
| 71 | VDD | power_in | Positive supply for logic and I/O pins. |
| 72 | RD0/PSP0/CTPLS/AD0 | bidirectional | Digital I/O, Parallel Slave Port data, CTMU pulse generator output and External Memory Address/Data 0. |
| 73 | RE7/ECCP2/P2A/AD15 | bidirectional | Digital I/O, ECCP2 capture/compare/PWM, ECCP2 PWM Output A and External Memory Address/Data 15. |
| 74 | RE6/P1B/CCP6/AD14 | bidirectional | Digital I/O, ECCP1 PWM Output B, CCP6 capture/compare/PWM and External Memory Address/Data 14. |
| 75 | RE5/P1C/CCP7/AD13 | bidirectional | Digital I/O, ECCP1 PWM Output C, CCP7 capture/compare/PWM and External Memory Address/Data 13. |
| 76 | RE4/P3B/CCP8/AD12 | bidirectional | Digital I/O, ECCP3 PWM Output B, CCP8 capture/compare/PWM and External Memory Address/Data 12. |
| 77 | RE3/P3C/CCP9/REFO/AD11 | bidirectional | Digital I/O, ECCP3 PWM Output C, CCP9 capture/compare/PWM, reference clock output and External Memory Address/Data 11. |
| 78 | RE2/P2B/CCP10/CS/AD10 | bidirectional | Digital I/O, ECCP2 PWM Output B, CCP10 capture/compare/PWM, Parallel Slave Port chip select and External Memory Address/Data 10. |
| 79 | RH0/AN23/A16 | bidirectional | Digital I/O, Analog Input 23 and External Memory Address line 16. |
| 80 | RH1/AN22/A17 | bidirectional | Digital I/O, Analog Input 22 and External Address/Data line 17. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-80(12x12) |
| Category | Embedded Processors & Controllers |
| Pins | 80 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | 1.8 | 5.5 | V | 1 | |||
| Operating Speed | 64 | MHz | up to, using PLL with external or internal oscillator | 1 | |||
| Internal Oscillator Block 16 MHz Accuracy | -2 | 2 | % | 16 MHz HF-INTOSC clock | 7 |
CAD (KiCad official)
- Symbol:
PIC18F85K22-I - Footprint:
Package_QFP:TQFP-80_12x12mm_P0.5mm - 3D model: TQFP-80(12x12) (KiCad packages3D, STEP)
- 3D model files:
pic18f85k22-i-etched.step/pic18f85k22-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f85k22-i.step/pic18f85k22-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (530 pp, sha256
1983a9feb3e07767, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).