Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18F8390-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-80(12x12)
PIC18F8390-I from Microchip Tech, in a TQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RH2/SEG45 | bidirectional | Digital I/O pin RH2 (PORTH), also LCD segment 45 analog output; PORTH is available only on 80-pin devices. |
| 2 | RH3/SEG44 | bidirectional | Digital I/O pin RH3 (PORTH), also LCD segment 44 analog output. |
| 3 | LCDBIAS2 | input | Analog BIAS2 input for the LCD resistor ladder. |
| 4 | LCDBIAS1 | input | Analog BIAS1 input for the LCD resistor ladder. |
| 5 | RG0/SEG30 | bidirectional | Digital I/O pin RG0 with Schmitt Trigger input, also LCD segment 30 analog output. |
| 6 | RG1/TX2/CK2/SEG29 | bidirectional | Digital I/O pin RG1, also AUSART2 asynchronous transmit or synchronous clock and LCD segment 29 output. |
| 7 | RG2/RX2/DT2/SEG28 | bidirectional | Digital I/O pin RG2, also AUSART2 asynchronous receive or synchronous data and LCD segment 28 output. |
| 8 | RG3/SEG27 | bidirectional | Digital I/O pin RG3 with Schmitt Trigger input, also LCD segment 27 analog output. |
| 9 | MCLR/VPP/RG5 | input | Active-low Master Clear (Reset) input, programming voltage input VPP, or digital input RG5 when MCLR is disabled. |
| 10 | RG4/SEG26 | bidirectional | Digital I/O pin RG4 with Schmitt Trigger input, also LCD segment 26 analog output. |
| 11 | VSS | power_in | Ground reference for logic and I/O pins. |
| 12 | VDD | power_in | Positive supply for logic and I/O pins. |
| 13 | RF7/SS/SEG25 | bidirectional | Digital I/O pin RF7, also SPI slave select input (TTL) and LCD segment 25 output. |
| 14 | RF6/AN11/SEG24 | bidirectional | Digital I/O pin RF6, also A/D analog input channel 11 and LCD segment 24 output. |
| 15 | RF5/AN10/CVREF/SEG23 | bidirectional | Digital I/O pin RF5, also A/D analog input channel 10, comparator voltage reference output CVREF and LCD segment 23 output. |
| 16 | RF4/AN9/SEG22 | bidirectional | Digital I/O pin RF4, also A/D analog input channel 9 and LCD segment 22 output. |
| 17 | RF3/AN8/SEG21 | bidirectional | Digital I/O pin RF3, also A/D analog input channel 8 and LCD segment 21 output. |
| 18 | RF2/AN7/C1OUT/SEG20 | bidirectional | Digital I/O pin RF2, also A/D analog input channel 7, comparator 1 output C1OUT and LCD segment 20 output. |
| 19 | RH7/SEG43 | bidirectional | Digital I/O pin RH7 (PORTH), also LCD segment 43 analog output. |
| 20 | RH6/SEG42 | bidirectional | Digital I/O pin RH6 (PORTH), also LCD segment 42 analog output. |
| 21 | RH5/SEG41 | bidirectional | Digital I/O pin RH5 (PORTH), also LCD segment 41 analog output. |
| 22 | RH4/SEG40 | bidirectional | Digital I/O pin RH4 (PORTH), also LCD segment 40 analog output. |
| 23 | RF1/AN6/C2OUT/SEG19 | bidirectional | Digital I/O pin RF1, also A/D analog input channel 6, comparator 2 output C2OUT and LCD segment 19 output. |
| 24 | RF0/AN5/SEG18 | bidirectional | Digital I/O pin RF0, also A/D analog input channel 5 and LCD segment 18 output. |
| 25 | AVDD | power_in | Positive supply for analog modules. |
| 26 | AVSS | power_in | Ground reference for analog modules. |
| 27 | RA3/AN3/VREF+/SEG17 | bidirectional | Digital I/O pin RA3, also A/D analog input channel 3, A/D reference voltage high input VREF+ and LCD segment 17 output. |
| 28 | RA2/AN2/VREF-/SEG16 | bidirectional | Digital I/O pin RA2, also A/D analog input channel 2, A/D reference voltage low input VREF- and LCD segment 16 output. |
| 29 | RA1/AN1 | bidirectional | Digital I/O pin RA1 with TTL input, also A/D analog input channel 1. |
| 30 | RA0/AN0 | bidirectional | Digital I/O pin RA0 with TTL input, also A/D analog input channel 0. |
| 31 | VSS | power_in | Ground reference for logic and I/O pins. |
| 32 | VDD | power_in | Positive supply for logic and I/O pins. |
| 33 | RA5/AN4/HLVDIN/SEG15 | bidirectional | Digital I/O pin RA5, also A/D analog input channel 4, high/low-voltage detect input HLVDIN and LCD segment 15 output. |
| 34 | RA4/T0CKI/SEG14 | bidirectional | Digital I/O pin RA4 with Schmitt Trigger input and open-drain output when configured as output, also Timer0 clock input T0CKI and LCD segment 14 output. |
| 35 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O pin RC1, also Timer1 oscillator input T1OSI and CCP2 capture input or compare/PWM output (default assignment when CCP2MX is set). |
| 36 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O pin RC0 with Schmitt Trigger input, also Timer1 oscillator output T1OSO and Timer1/Timer3 external clock input T13CKI. |
| 37 | RC6/TX1/CK1 | bidirectional | Digital I/O pin RC6, also EUSART1 asynchronous transmit TX1 or synchronous clock CK1. |
| 38 | RC7/RX1/DT1 | bidirectional | Digital I/O pin RC7, also EUSART1 asynchronous receive RX1 or synchronous data DT1. |
| 39 | RJ4/SEG39 | bidirectional | Digital I/O pin RJ4 (PORTJ), also LCD segment 39 analog output. |
| 40 | RJ5/SEG38 | bidirectional | Digital I/O pin RJ5 (PORTJ), also LCD segment 38 analog output. |
| 41 | RJ6/SEG37 | bidirectional | Digital I/O pin RJ6 (PORTJ), also LCD segment 37 analog output. |
| 42 | RJ7/SEG36 | bidirectional | Digital I/O pin RJ7 (PORTJ), also LCD segment 36 analog output. |
| 43 | RC2/CCP1/SEG13 | bidirectional | Digital I/O pin RC2 with Schmitt Trigger input, also CCP1 capture input or compare/PWM output and LCD segment 13 output. |
| 44 | RC3/SCK/SCL | bidirectional | Digital I/O pin RC3 with Schmitt Trigger input, also MSSP SPI serial clock or I2C serial clock SCL. |
| 45 | RC4/SDI/SDA | bidirectional | Digital I/O pin RC4 with Schmitt Trigger input, also MSSP SPI data input SDI or I2C data SDA. |
| 46 | RC5/SDO/SEG12 | bidirectional | Digital I/O pin RC5, also MSSP SPI data output SDO and LCD segment 12 output. |
| 47 | RB7/KBI3/PGD | bidirectional | Digital I/O pin RB7 with interrupt-on-change KBI3 and ICSP programming data PGD. |
| 48 | VDD | power_in | Positive supply for logic and I/O pins. |
| 49 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input OSC1/CLKI, also digital I/O RA7 in INTIO modes. |
| 50 | OSC2/CLKO/RA6 | output | Oscillator crystal or clock output OSC2/CLKO, also digital I/O RA6 in RCIO, INTIO2 and ECIO modes. |
| 51 | VSS | power_in | Ground reference for logic and I/O pins. |
| 52 | RB6/KBI2/PGC | bidirectional | Digital I/O pin RB6 with interrupt-on-change KBI2 and ICSP programming clock PGC. |
| 53 | RB5/KBI1 | bidirectional | Digital I/O pin RB5 with interrupt-on-change KBI1. |
| 54 | RB4/KBI0/SEG11 | bidirectional | Digital I/O pin RB4 with interrupt-on-change KBI0 and LCD segment 11 output. |
| 55 | RB3/INT3/SEG10 | bidirectional | Digital I/O pin RB3 with external interrupt 3 INT3 and LCD segment 10 output. |
| 56 | RB2/INT2/SEG9 | bidirectional | Digital I/O pin RB2 with external interrupt 2 INT2 and LCD segment 9 output. |
| 57 | RB1/INT1/SEG8 | bidirectional | Digital I/O pin RB1 with external interrupt 1 INT1 and LCD segment 8 output. |
| 58 | RB0/INT0 | bidirectional | Digital I/O pin RB0 with external interrupt 0 INT0. |
| 59 | RJ3/SEG35 | bidirectional | Digital I/O pin RJ3 (PORTJ), also LCD segment 35 analog output. |
| 60 | RJ2/SEG34 | bidirectional | Digital I/O pin RJ2 (PORTJ), also LCD segment 34 analog output. |
| 61 | RJ1/SEG33 | bidirectional | Digital I/O pin RJ1 (PORTJ), also LCD segment 33 analog output. |
| 62 | RJ0/SEG32 | bidirectional | Digital I/O pin RJ0 (PORTJ), also LCD segment 32 analog output. |
| 63 | RD7/SEG7 | bidirectional | Digital I/O pin RD7 with Schmitt Trigger input, also LCD segment 7 analog output. |
| 64 | RD6/SEG6 | bidirectional | Digital I/O pin RD6 with Schmitt Trigger input, also LCD segment 6 analog output. |
| 65 | RD5/SEG5 | bidirectional | Digital I/O pin RD5 with Schmitt Trigger input, also LCD segment 5 analog output. |
| 66 | RD4/SEG4 | bidirectional | Digital I/O pin RD4 with Schmitt Trigger input, also LCD segment 4 analog output. |
| 67 | RD3/SEG3 | bidirectional | Digital I/O pin RD3 with Schmitt Trigger input, also LCD segment 3 analog output. |
| 68 | RD2/SEG2 | bidirectional | Digital I/O pin RD2 with Schmitt Trigger input, also LCD segment 2 analog output. |
| 69 | RD1/SEG1 | bidirectional | Digital I/O pin RD1 with Schmitt Trigger input, also LCD segment 1 analog output. |
| 70 | VSS | power_in | Ground reference for logic and I/O pins. |
| 71 | VDD | power_in | Positive supply for logic and I/O pins. |
| 72 | RD0/SEG0 | bidirectional | Digital I/O pin RD0 with Schmitt Trigger input, also LCD segment 0 analog output. |
| 73 | RE7/CCP2/SEG31 | bidirectional | Digital I/O pin RE7, also CCP2 capture input or compare/PWM output (alternate assignment when CCP2MX is cleared) and LCD segment 31 output. |
| 74 | RE6/COM3 | bidirectional | Digital I/O pin RE6 with Schmitt Trigger input, also LCD COM3 driver output. |
| 75 | RE5/COM2 | bidirectional | Digital I/O pin RE5 with Schmitt Trigger input, also LCD COM2 driver output. |
| 76 | RE4/COM1 | bidirectional | Digital I/O pin RE4 with Schmitt Trigger input, also LCD COM1 driver output. |
| 77 | COM0 | output | Analog COM0 output for the LCD driver. |
| 78 | LCDBIAS3 | input | Analog BIAS3 input for the LCD resistor ladder; AVDD should also be connected to this pin. |
| 79 | RH0/SEG47 | bidirectional | Digital I/O pin RH0 (PORTH), also LCD segment 47 analog output. |
| 80 | RH1/SEG46 | bidirectional | Digital I/O pin RH1 (PORTH), also LCD segment 46 analog output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-80(12x12) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 80 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 4.2 | 5.5 | V | 353 | ||
| RAM Data Retention Voltage | VDR | 1.5 | V | 353 | |||
| VDD Start Voltage to Ensure Internal Power-on Reset Signal | VPOR | 0.7 | V | 353 | |||
| VDD Rise Rate to Ensure Internal Power-on Reset Signal | SVDD | 0.05 | V/ms | 353 | |||
| Brown-out Reset Voltage | VBOR | 4.11 | 4.33 | 4.55 | V | BORV1:BORV0 = 01 | 353 |
| Brown-out Reset Voltage | VBOR | 4.36 | 4.59 | 4.82 | V | BORV1:BORV0 = 00 | 353 |
| Power-Down Current (Sleep mode) | IPD | 0.1 | 2 | μA | -40°C, VDD = 5.0V | 354 | |
| Power-Down Current (Sleep mode) | IPD | 0.4 | 15 | μA | +85°C, VDD = 5.0V | 354 | |
| Ambient temperature under bias | TA | -40 | 125 | °C | 351 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 351 | ||
| Voltage on any pin with respect to VSS | -0.3 | V | Except VDD and MCLR; max is VDD + 0.3V | 351 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 7.5 | V | 351 | ||
| Voltage on MCLR with respect to VSS | VMCLR | 0 | 13.25 | V | Note 2 | 351 | |
| Total power dissipation | Pdis | 1 | W | Note 1 | 351 | ||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VDD | 351 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 351 | |
| Operating temperature | TA | -40 | 85 | °C | Industrial | 353 |
CAD (KiCad official)
- Symbol:
PIC18F8390-I - Footprint:
Package_QFP:TQFP-80_12x12mm_P0.5mm - 3D model: TQFP-80(12x12) (KiCad packages3D, STEP)
- 3D model files:
pic18f8390-i-etched.step/pic18f8390-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f8390-i.step/pic18f8390-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (414 pp, sha256
cc9530ea073f8aed, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).