main
Ray
Publish 0.1.0
7a1c663
PIC18F67K22-I
Microchip Tech · MICROCHIP · TQFP-64(10x10)
PIC18F67K22-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE1/WR/P2C | bidirectional | Digital I/O with Parallel Slave Port write strobe, ECCP2 PWM output C, and external input levels per the ST/TTL buffer rating. |
| 2 | RE0/RD/P2D | bidirectional | Digital I/O with Parallel Slave Port read strobe and ECCP2 PWM output D. |
| 3 | RG0/ECCP3/P3A | bidirectional | Digital I/O with ECCP3 capture/compare input and ECCP3 PWM output A. |
| 4 | RG1/TX2/CK2/AN19/C3OUT | bidirectional | Digital I/O with EUSART2 asynchronous transmit, synchronous clock, analog input 19 and comparator 3 output. |
| 5 | RG2/RX2/DT2/AN18/C3INA | bidirectional | Digital I/O with EUSART2 receive and synchronous data, analog input 18 and comparator 3 input A. |
| 6 | RG3/CCP4/AN17/P3D/C3INB | bidirectional | Digital I/O with CCP4 capture/compare/PWM, analog input 17, ECCP3 PWM output D and comparator 3 input B. |
| 7 | MCLR/RG5 | input | Master Clear input (active-low Reset) or programming voltage input; when MCLR is disabled this pin is general purpose input-only RG5. |
| 8 | RG4/RTCC/T7CKI/T5G/CCP5/AN16/P1D/C3INC | bidirectional | Digital I/O with RTCC output, Timer7 clock input, Timer5 gate input, CCP5, analog input 16, ECCP1 PWM output D and comparator 3 input C. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDDCORE/VCAP | power_in | Core logic power or external filter capacitor connection; the capacitor on this pin is 10 µF when the regulator is enabled. |
| 11 | RF7/AN5/SS1 | bidirectional | Digital I/O with analog input 5 and SPI1 slave select input. |
| 12 | RF6/AN11/C1INA | bidirectional | Digital I/O with analog input 11 and comparator 1 input A. |
| 13 | RF5/AN10/CVREF/C1INB | bidirectional | Digital I/O with analog input 10, comparator voltage reference output CVREF and comparator 1 input B. |
| 14 | RF4/AN9/C2INA | bidirectional | Digital I/O with analog input 9 and comparator 2 input A. |
| 15 | RF3/AN8/C2INB/CTMUI | bidirectional | Digital I/O with analog input 8, comparator 2 input B and CTMU pulse generator charger output. |
| 16 | RF2/AN7/C1OUT | bidirectional | Digital I/O with analog input 7 and comparator 1 output. |
| 17 | RF1/AN6/C2OUT/CTDIN | bidirectional | Digital I/O with analog input 6, comparator 2 output and CTMU pulse delay input. |
| 18 | ENVREG | input | Enable for on-chip voltage regulator; must be tied to VDD to enable or to VSS to disable. |
| 19 | AVDD | power_in | Positive supply for analog modules; must always be connected. |
| 20 | AVSS | power_in | Ground reference for analog modules; must always be connected. |
| 21 | RA3/AN3/VREF+ | bidirectional | Digital I/O with analog input 3 and A/D reference voltage (high) input. |
| 22 | RA2/AN2/VREF- | bidirectional | Digital I/O with analog input 2 and A/D reference voltage (low) input. |
| 23 | RA1/AN1 | bidirectional | Digital I/O with analog input 1. |
| 24 | RA0/AN0/ULPWU | bidirectional | Digital I/O with analog input 0 and Ultra Low-Power Wake-up input. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for logic and I/O pins. |
| 27 | RA5/AN4/T1CKI/T3G/HLVDIN | bidirectional | Digital I/O with analog input 4, Timer1 clock input, Timer3 gate input and High/Low-Voltage Detect input. |
| 28 | RA4/T0CKI | bidirectional | Digital I/O with Schmitt Trigger input and Timer0 external clock input. |
| 29 | RC1/SOSCI/ECCP2/P2A | bidirectional | Digital I/O with SOSC oscillator input, ECCP2 capture/compare/PWM and ECCP2 PWM output A. |
| 30 | RC0/SOSCO/SCLKI | bidirectional | Digital I/O with SOSC oscillator output and digital SOSC clock input. |
| 31 | RC6/TX1/CK1 | bidirectional | Digital I/O with EUSART1 asynchronous transmit and synchronous clock. |
| 32 | RC7/RX1/DT1 | bidirectional | Digital I/O with EUSART1 asynchronous receive and synchronous data. |
| 33 | RC2/ECCP1/P1A | bidirectional | Digital I/O with ECCP1 capture/compare/PWM output and ECCP1 PWM output A. |
| 34 | RC3/SCK1/SCL1 | bidirectional | Digital I/O with MSSP1 SPI clock input/output and I2C clock. |
| 35 | RC4/SDI1/SDA1 | bidirectional | Digital I/O with MSSP1 SPI data input and I2C data I/O. |
| 36 | RC5/SDO1 | bidirectional | Digital I/O with MSSP1 SPI data output. |
| 37 | RB7/KBI3/PGD | bidirectional | Digital I/O with interrupt-on-change and ICSP/ICD programming data pin. |
| 38 | VDD | power_in | Positive supply for logic and I/O pins. |
| 39 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input; RA7 digital I/O when internal oscillator modes are used. |
| 40 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal or clock output (CLKO = FOSC/4); RA6 digital I/O in internal oscillator modes. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RB6/KBI2/PGC | bidirectional | Digital I/O with interrupt-on-change and ICSP/ICD programming clock pin. |
| 43 | RB5/KBI1/T3CKI/T1G | bidirectional | Digital I/O with interrupt-on-change, Timer3 clock input and Timer1 external clock gate input. |
| 44 | RB4/KBI0 | bidirectional | Digital I/O with interrupt-on-change. |
| 45 | RB3/INT3/CTED2/ECCP2/P2A | bidirectional | Digital I/O with external interrupt 3, CTMU edge 2 input, ECCP2 capture/compare and PWM output A. |
| 46 | RB2/INT2/CTED1 | bidirectional | Digital I/O with external interrupt 2 and CTMU edge 1 input. |
| 47 | RB1/INT1 | bidirectional | Digital I/O with external interrupt 1. |
| 48 | RB0/INT0/FLT0 | bidirectional | Digital I/O with external interrupt 0 and Enhanced PWM Fault input for ECCP1/2/3. |
| 49 | RD7/PSP7/SS2 | bidirectional | Digital I/O with Parallel Slave Port data bit 7 and MSSP2 SPI slave select input. |
| 50 | RD6/PSP6/SCK2/SCL2 | bidirectional | Digital I/O with Parallel Slave Port data bit 6, MSSP2 SPI clock and I2C clock. |
| 51 | RD5/PSP5/SDI2/SDA2 | bidirectional | Digital I/O with Parallel Slave Port data bit 5, MSSP2 SPI data input and I2C data. |
| 52 | RD4/PSP4/SDO2 | bidirectional | Digital I/O with Parallel Slave Port data bit 4 and MSSP2 SPI data output. |
| 53 | RD3/PSP3 | bidirectional | Digital I/O with Parallel Slave Port data bit 3. |
| 54 | RD2/PSP2 | bidirectional | Digital I/O with Parallel Slave Port data bit 2. |
| 55 | RD1/PSP1/T5CKI/T7G | bidirectional | Digital I/O with Parallel Slave Port data bit 1, Timer5 clock input and Timer7 gate input. |
| 56 | VSS | power_in | Ground reference for logic and I/O pins. |
| 57 | VDD | power_in | Positive supply for logic and I/O pins. |
| 58 | RD0/PSP0/CTPLS | bidirectional | Digital I/O with Parallel Slave Port data bit 0 and CTMU pulse generator output. |
| 59 | RE7/ECCP2/P2A | bidirectional | Digital I/O with ECCP2 capture/compare/PWM output and ECCP2 PWM output A. |
| 60 | RE6/P1B/CCP6 | bidirectional | Digital I/O with ECCP1 PWM output B and CCP6 capture/compare/PWM. |
| 61 | RE5/P1C/CCP7 | bidirectional | Digital I/O with ECCP1 PWM output C and CCP7 capture/compare/PWM. |
| 62 | RE4/P3B/CCP8 | bidirectional | Digital I/O with ECCP3 PWM output B and CCP8 capture/compare/PWM. |
| 63 | RE3/P3C/CCP9/REFO | bidirectional | Digital I/O with ECCP3 PWM output C, CCP9 capture/compare/PWM and reference clock output REFO. |
| 64 | RE2/CS/P2B/CCP10 | bidirectional | Digital I/O with Parallel Slave Port chip select, ECCP2 PWM output B and CCP10 capture/compare/PWM. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage range | 1.8 | 5.5 | V | 1 | |||
| Operating frequency, EC (external clock) mode | 0 | 64 | MHz | EC mode (external clock) | 45 | ||
| Operating frequency, HS mode | 4 | 25 | MHz | HS mode, crystal or ceramic resonator | 45 | ||
| Operating frequency, LP mode | 31.25 | 100 | kHz | LP mode | 45 | ||
| Operating frequency, XT mode (lower limit) | 100 | kHz | XT mode | 45 | |||
| Operating frequency, XT mode (upper limit) | 4 | MHz | XT mode | 45 | |||
| Operating frequency, EXTRC mode | 0 | 4 | MHz | EXTRC mode (external RC) | 45 | ||
| PLL input frequency range | 4 | 16 | MHz | PLL enabled, HS or EC oscillator input frequency | 47 | ||
| RC oscillator external resistor | REXT | 3 | 100 | kΩ | RC and RCIO oscillator modes, recommended values | 46 | |
| RC oscillator external capacitor | CEXT | 20 | 300 | pF | RC and RCIO oscillator modes, recommended values | 46 | |
| HF-INTOSC 16 MHz clock accuracy | -2 | 2 | % | 16 MHz HF-INTOSC block | 7 | ||
| VCAP/VDDCORE capacitor ESR | ESR | 5 | Ω | Low-ESR capacitor on VCAP/VDDCORE, regulator enabled | 37 | ||
| Program Flash erase/write endurance | 10000 | erase/write cycles | Program Flash, minimum | 1 | |||
| Flash data retention | 40 | years | Flash retention, minimum | 1 | |||
| Real-time clock error with periodic auto-adjust calibration | 3 | s per month | RTCC with periodic auto-adjust calibration | 232 | |||
| Digital I/O input tolerance | 5.5 | V | All digital ports, 5.5V input tolerant | 160 | |||
| Recommended decoupling capacitor rated voltage | 10 | 20 | V | Recommended 100 nF decoupling capacitor on each power pin pair | 36 | ||
| VCAP/VDDCORE external capacitor | 10 | µF | Regulator enabled; connected to ground; ceramic or tantalum | 37 | |||
| Decoupling capacitor (recommended) | 100 | nF | Recommended on each VDD/VSS and AVDD/AVSS pair | 36 | |||
| LF-INTRC internal oscillator frequency | 31 | kHz | LF-INTRC, approximate, stable over temperature and VDD | 7 | |||
| Power-up Timer (PWRT) delay | 1 | ms | Fixed power-up delay, about 1 ms (see Parameter 33) | 53 |
CAD (KiCad official)
- Symbol:
PIC18F67K22-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic18f67k22-i-etched.step/pic18f67k22-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f67k22-i.step/pic18f67k22-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (530 pp, sha256
1983a9feb3e07767, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC18F67K22-I
**Microchip Tech** · MICROCHIP · TQFP-64(10x10)
PIC18F67K22-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE1/WR/P2C | bidirectional | Digital I/O with Parallel Slave Port write strobe, ECCP2 PWM output C, and external input levels per the ST/TTL buffer rating. |
| 2 | RE0/RD/P2D | bidirectional | Digital I/O with Parallel Slave Port read strobe and ECCP2 PWM output D. |
| 3 | RG0/ECCP3/P3A | bidirectional | Digital I/O with ECCP3 capture/compare input and ECCP3 PWM output A. |
| 4 | RG1/TX2/CK2/AN19/C3OUT | bidirectional | Digital I/O with EUSART2 asynchronous transmit, synchronous clock, analog input 19 and comparator 3 output. |
| 5 | RG2/RX2/DT2/AN18/C3INA | bidirectional | Digital I/O with EUSART2 receive and synchronous data, analog input 18 and comparator 3 input A. |
| 6 | RG3/CCP4/AN17/P3D/C3INB | bidirectional | Digital I/O with CCP4 capture/compare/PWM, analog input 17, ECCP3 PWM output D and comparator 3 input B. |
| 7 | MCLR/RG5 | input | Master Clear input (active-low Reset) or programming voltage input; when MCLR is disabled this pin is general purpose input-only RG5. |
| 8 | RG4/RTCC/T7CKI/T5G/CCP5/AN16/P1D/C3INC | bidirectional | Digital I/O with RTCC output, Timer7 clock input, Timer5 gate input, CCP5, analog input 16, ECCP1 PWM output D and comparator 3 input C. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDDCORE/VCAP | power_in | Core logic power or external filter capacitor connection; the capacitor on this pin is 10 µF when the regulator is enabled. |
| 11 | RF7/AN5/SS1 | bidirectional | Digital I/O with analog input 5 and SPI1 slave select input. |
| 12 | RF6/AN11/C1INA | bidirectional | Digital I/O with analog input 11 and comparator 1 input A. |
| 13 | RF5/AN10/CVREF/C1INB | bidirectional | Digital I/O with analog input 10, comparator voltage reference output CVREF and comparator 1 input B. |
| 14 | RF4/AN9/C2INA | bidirectional | Digital I/O with analog input 9 and comparator 2 input A. |
| 15 | RF3/AN8/C2INB/CTMUI | bidirectional | Digital I/O with analog input 8, comparator 2 input B and CTMU pulse generator charger output. |
| 16 | RF2/AN7/C1OUT | bidirectional | Digital I/O with analog input 7 and comparator 1 output. |
| 17 | RF1/AN6/C2OUT/CTDIN | bidirectional | Digital I/O with analog input 6, comparator 2 output and CTMU pulse delay input. |
| 18 | ENVREG | input | Enable for on-chip voltage regulator; must be tied to VDD to enable or to VSS to disable. |
| 19 | AVDD | power_in | Positive supply for analog modules; must always be connected. |
| 20 | AVSS | power_in | Ground reference for analog modules; must always be connected. |
| 21 | RA3/AN3/VREF+ | bidirectional | Digital I/O with analog input 3 and A/D reference voltage (high) input. |
| 22 | RA2/AN2/VREF- | bidirectional | Digital I/O with analog input 2 and A/D reference voltage (low) input. |
| 23 | RA1/AN1 | bidirectional | Digital I/O with analog input 1. |
| 24 | RA0/AN0/ULPWU | bidirectional | Digital I/O with analog input 0 and Ultra Low-Power Wake-up input. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for logic and I/O pins. |
| 27 | RA5/AN4/T1CKI/T3G/HLVDIN | bidirectional | Digital I/O with analog input 4, Timer1 clock input, Timer3 gate input and High/Low-Voltage Detect input. |
| 28 | RA4/T0CKI | bidirectional | Digital I/O with Schmitt Trigger input and Timer0 external clock input. |
| 29 | RC1/SOSCI/ECCP2/P2A | bidirectional | Digital I/O with SOSC oscillator input, ECCP2 capture/compare/PWM and ECCP2 PWM output A. |
| 30 | RC0/SOSCO/SCLKI | bidirectional | Digital I/O with SOSC oscillator output and digital SOSC clock input. |
| 31 | RC6/TX1/CK1 | bidirectional | Digital I/O with EUSART1 asynchronous transmit and synchronous clock. |
| 32 | RC7/RX1/DT1 | bidirectional | Digital I/O with EUSART1 asynchronous receive and synchronous data. |
| 33 | RC2/ECCP1/P1A | bidirectional | Digital I/O with ECCP1 capture/compare/PWM output and ECCP1 PWM output A. |
| 34 | RC3/SCK1/SCL1 | bidirectional | Digital I/O with MSSP1 SPI clock input/output and I2C clock. |
| 35 | RC4/SDI1/SDA1 | bidirectional | Digital I/O with MSSP1 SPI data input and I2C data I/O. |
| 36 | RC5/SDO1 | bidirectional | Digital I/O with MSSP1 SPI data output. |
| 37 | RB7/KBI3/PGD | bidirectional | Digital I/O with interrupt-on-change and ICSP/ICD programming data pin. |
| 38 | VDD | power_in | Positive supply for logic and I/O pins. |
| 39 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input; RA7 digital I/O when internal oscillator modes are used. |
| 40 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal or clock output (CLKO = FOSC/4); RA6 digital I/O in internal oscillator modes. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RB6/KBI2/PGC | bidirectional | Digital I/O with interrupt-on-change and ICSP/ICD programming clock pin. |
| 43 | RB5/KBI1/T3CKI/T1G | bidirectional | Digital I/O with interrupt-on-change, Timer3 clock input and Timer1 external clock gate input. |
| 44 | RB4/KBI0 | bidirectional | Digital I/O with interrupt-on-change. |
| 45 | RB3/INT3/CTED2/ECCP2/P2A | bidirectional | Digital I/O with external interrupt 3, CTMU edge 2 input, ECCP2 capture/compare and PWM output A. |
| 46 | RB2/INT2/CTED1 | bidirectional | Digital I/O with external interrupt 2 and CTMU edge 1 input. |
| 47 | RB1/INT1 | bidirectional | Digital I/O with external interrupt 1. |
| 48 | RB0/INT0/FLT0 | bidirectional | Digital I/O with external interrupt 0 and Enhanced PWM Fault input for ECCP1/2/3. |
| 49 | RD7/PSP7/SS2 | bidirectional | Digital I/O with Parallel Slave Port data bit 7 and MSSP2 SPI slave select input. |
| 50 | RD6/PSP6/SCK2/SCL2 | bidirectional | Digital I/O with Parallel Slave Port data bit 6, MSSP2 SPI clock and I2C clock. |
| 51 | RD5/PSP5/SDI2/SDA2 | bidirectional | Digital I/O with Parallel Slave Port data bit 5, MSSP2 SPI data input and I2C data. |
| 52 | RD4/PSP4/SDO2 | bidirectional | Digital I/O with Parallel Slave Port data bit 4 and MSSP2 SPI data output. |
| 53 | RD3/PSP3 | bidirectional | Digital I/O with Parallel Slave Port data bit 3. |
| 54 | RD2/PSP2 | bidirectional | Digital I/O with Parallel Slave Port data bit 2. |
| 55 | RD1/PSP1/T5CKI/T7G | bidirectional | Digital I/O with Parallel Slave Port data bit 1, Timer5 clock input and Timer7 gate input. |
| 56 | VSS | power_in | Ground reference for logic and I/O pins. |
| 57 | VDD | power_in | Positive supply for logic and I/O pins. |
| 58 | RD0/PSP0/CTPLS | bidirectional | Digital I/O with Parallel Slave Port data bit 0 and CTMU pulse generator output. |
| 59 | RE7/ECCP2/P2A | bidirectional | Digital I/O with ECCP2 capture/compare/PWM output and ECCP2 PWM output A. |
| 60 | RE6/P1B/CCP6 | bidirectional | Digital I/O with ECCP1 PWM output B and CCP6 capture/compare/PWM. |
| 61 | RE5/P1C/CCP7 | bidirectional | Digital I/O with ECCP1 PWM output C and CCP7 capture/compare/PWM. |
| 62 | RE4/P3B/CCP8 | bidirectional | Digital I/O with ECCP3 PWM output B and CCP8 capture/compare/PWM. |
| 63 | RE3/P3C/CCP9/REFO | bidirectional | Digital I/O with ECCP3 PWM output C, CCP9 capture/compare/PWM and reference clock output REFO. |
| 64 | RE2/CS/P2B/CCP10 | bidirectional | Digital I/O with Parallel Slave Port chip select, ECCP2 PWM output B and CCP10 capture/compare/PWM. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage range | | 1.8 | | 5.5 | V | | 1 |
| Operating frequency, EC (external clock) mode | | 0 | | 64 | MHz | EC mode (external clock) | 45 |
| Operating frequency, HS mode | | 4 | | 25 | MHz | HS mode, crystal or ceramic resonator | 45 |
| Operating frequency, LP mode | | 31.25 | | 100 | kHz | LP mode | 45 |
| Operating frequency, XT mode (lower limit) | | 100 | | | kHz | XT mode | 45 |
| Operating frequency, XT mode (upper limit) | | | | 4 | MHz | XT mode | 45 |
| Operating frequency, EXTRC mode | | 0 | | 4 | MHz | EXTRC mode (external RC) | 45 |
| PLL input frequency range | | 4 | | 16 | MHz | PLL enabled, HS or EC oscillator input frequency | 47 |
| RC oscillator external resistor | REXT | 3 | | 100 | kΩ | RC and RCIO oscillator modes, recommended values | 46 |
| RC oscillator external capacitor | CEXT | 20 | | 300 | pF | RC and RCIO oscillator modes, recommended values | 46 |
| HF-INTOSC 16 MHz clock accuracy | | -2 | | 2 | % | 16 MHz HF-INTOSC block | 7 |
| VCAP/VDDCORE capacitor ESR | ESR | | | 5 | Ω | Low-ESR capacitor on VCAP/VDDCORE, regulator enabled | 37 |
| Program Flash erase/write endurance | | 10000 | | | erase/write cycles | Program Flash, minimum | 1 |
| Flash data retention | | 40 | | | years | Flash retention, minimum | 1 |
| Real-time clock error with periodic auto-adjust calibration | | | | 3 | s per month | RTCC with periodic auto-adjust calibration | 232 |
| Digital I/O input tolerance | | | | 5.5 | V | All digital ports, 5.5V input tolerant | 160 |
| Recommended decoupling capacitor rated voltage | | 10 | | 20 | V | Recommended 100 nF decoupling capacitor on each power pin pair | 36 |
| VCAP/VDDCORE external capacitor | | | 10 | | µF | Regulator enabled; connected to ground; ceramic or tantalum | 37 |
| Decoupling capacitor (recommended) | | | 100 | | nF | Recommended on each VDD/VSS and AVDD/AVSS pair | 36 |
| LF-INTRC internal oscillator frequency | | | 31 | | kHz | LF-INTRC, approximate, stable over temperature and VDD | 7 |
| Power-up Timer (PWRT) delay | | | 1 | | ms | Fixed power-up delay, about 1 ms (see Parameter 33) | 53 |
## CAD (KiCad official)
- Symbol: `PIC18F67K22-I`
- Footprint: `Package_QFP:TQFP-64_10x10mm_P0.5mm`
- 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `pic18f67k22-i-etched.step` / `pic18f67k22-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic18f67k22-i.step` / `pic18f67k22-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/PIC18F87K22-Family-Data-Sheet-30009960F.pdf) (530 pp, sha256 `1983a9feb3e07767`, retrieved 2026-11-05, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic18f67k22-i-datasheet.pdf)