main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pic18f65j11-i: symbol viewer · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
pic18f65j11-i-etched.glb Publish 0.1.0 · Ray
pic18f65j11-i-etched.step pic18f65j11-i: factory component page (tier=mfr) · Ray
pic18f65j11-i-hero.glb pic18f65j11-i: hero GLB from the etched model (keeps the MPN mark) · Ray
pic18f65j11-i-hero.overlay.json Publish 0.1.0 · Ray
pic18f65j11-i.glb Publish 0.1.0 · Ray
pic18f65j11-i.kicad_mod Publish 0.1.0 · Ray
pic18f65j11-i.kicad_sym pic18f65j11-i: symbol repaired (body fitted to the names) · Ray
pic18f65j11-i.lbr pic18f65j11-i: symbol repaired (body fitted to the names) · Ray
pic18f65j11-i.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 64 pins · Ray

PIC18F65J11-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)

PIC18F65J11-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE1/WR bidirectional Digital I/O (PORTE<1>) that serves as the Parallel Slave Port write enable control input (WR), with input tolerance limited to VDD.
2 RE0/RD bidirectional Digital I/O (PORTE<0>) that serves as the Parallel Slave Port read enable control input (RD), with input tolerance limited to VDD.
3 RG0 bidirectional Digital I/O (PORTG<0>) with Schmitt Trigger input, with input tolerance limited to VDD.
4 RG1/TX2/CK2 bidirectional Digital I/O (PORTG<1>), or AUSART asynchronous transmit (TX2) or synchronous clock (CK2).
5 RG2/RX2/DT2 bidirectional Digital I/O (PORTG<2>), or AUSART asynchronous receive (RX2) or synchronous data (DT2), with input tolerance limited to VDD.
6 RG3 bidirectional Digital I/O (PORTG<3>) with Schmitt Trigger input, with input tolerance limited to VDD.
7 MCLR input Master Clear input or programming voltage input; this pin is an active-low Reset to the device.
8 RG4 bidirectional Digital I/O (PORTG<4>) with Schmitt Trigger input that tolerates voltages up to 5.5V.
9 VSS power_in Ground reference for logic and I/O pins.
10 VDDCORE/VCAP power_in Core logic power supply (VDDCORE) when the regulator is disabled, or external filter capacitor connection (VCAP) when the regulator is enabled.
11 RF7/AN5/SS bidirectional Digital I/O (PORTF<7>), analog input 5, or SPI slave select input (SS) for the MSSP module.
12 RF6/AN11 bidirectional Digital I/O (PORTF<6>) or analog input 11.
13 RF5/AN10/CVREF bidirectional Digital I/O (PORTF<5>), analog input 10, or comparator voltage reference output (CVREF).
14 RF4/AN9 bidirectional Digital I/O (PORTF<4>) or analog input 9.
15 RF3/AN8 bidirectional Digital I/O (PORTF<3>) or analog input 8.
16 RF2/AN7/C1OUT bidirectional Digital I/O (PORTF<2>), analog input 7, or comparator 1 output (C1OUT).
17 RF1/AN6/C2OUT bidirectional Digital I/O (PORTF<1>), analog input 6, or comparator 2 output (C2OUT).
18 ENVREG input Enable for the on-chip voltage regulator; tying it to VDD enables the regulator and tying it to ground disables it.
19 AVDD power_in Positive supply for analog modules.
20 AVSS power_in Ground reference for analog modules.
21 RA3/AN3/VREF+ bidirectional Digital I/O (PORTA<3>), analog input 3, or A/D high reference voltage input (VREF+).
22 RA2/AN2/VREF- bidirectional Digital I/O (PORTA<2>), analog input 2, or A/D low reference voltage input (VREF-).
23 RA1/AN1 bidirectional Digital I/O (PORTA<1>) or analog input 1.
24 RA0/AN0 bidirectional Digital I/O (PORTA<0>) or analog input 0.
25 VSS power_in Ground reference for logic and I/O pins.
26 VDD power_in Positive supply for logic and I/O pins.
27 RA5/AN4 bidirectional Digital I/O (PORTA<5>) or analog input 4.
28 RA4/T0CKI bidirectional Digital I/O (PORTA<4>), open-drain when configured as output, or Timer0 external clock input (T0CKI) with Schmitt Trigger input.
29 RC1/T1OSI/CCP2 bidirectional Digital I/O (PORTC<1>), Timer1 oscillator input (T1OSI), or CCP2 capture input / compare and PWM output (default CCP2 assignment when CCP2MX is set).
30 RC0/T1OSO/T13CKI bidirectional Digital I/O (PORTC<0>), Timer1 oscillator output (T1OSO), or Timer1/Timer3 external clock input (T13CKI).
31 RC6/TX1/CK1 bidirectional Digital I/O (PORTC<6>), EUSART asynchronous transmit (TX1), or EUSART synchronous clock (CK1).
32 RC7/RX1/DT1 bidirectional Digital I/O (PORTC<7>), EUSART asynchronous receive (RX1), or EUSART synchronous data (DT1).
33 RC2/CCP1 bidirectional Digital I/O (PORTC<2>), or CCP1 capture input / compare output / PWM output.
34 RC3/SCK/SCL bidirectional Digital I/O (PORTC<3>), MSSP SPI clock input/output (SCK), or I2C clock input/output (SCL).
35 RC4/SDI/SDA bidirectional Digital I/O (PORTC<4>), MSSP SPI data input (SDI), or I2C data I/O (SDA).
36 RC5/SDO bidirectional Digital I/O (PORTC<5>) or MSSP SPI data output (SDO).
37 RB7/KBI3/PGD bidirectional Digital I/O (PORTB<7>) with weak pull-up, interrupt-on-change pin (KBI3), or ICSP/ICD serial data pin (PGD).
38 VDD power_in Positive supply for logic and I/O pins.
39 RA7/OSC1/CLKI bidirectional General purpose I/O pin RA7, or oscillator crystal input / external clock source input (OSC1/CLKI); RA7 is only available as digital I/O in select oscillator modes.
40 RA6/OSC2/CLKO bidirectional General purpose I/O pin RA6, or oscillator crystal output (OSC2) or CLKO at 1/4 the OSC1 frequency in EC modes; RA6 is only available as digital I/O in select oscillator modes.
41 VSS power_in Ground reference for logic and I/O pins.
42 RB6/KBI2/PGC bidirectional Digital I/O (PORTB<6>) with weak pull-up, interrupt-on-change pin (KBI2), or ICSP/ICD clock pin (PGC).
43 RB5/KBI1 bidirectional Digital I/O (PORTB<5>) with weak pull-up, or interrupt-on-change pin (KBI1).
44 RB4/KBI0 bidirectional Digital I/O (PORTB<4>) with weak pull-up, or interrupt-on-change pin (KBI0).
45 RB3/INT3 bidirectional Digital I/O (PORTB<3>) with weak pull-up, or external interrupt 3 input (INT3).
46 RB2/INT2 bidirectional Digital I/O (PORTB<2>) with weak pull-up, or external interrupt 2 input (INT2).
47 RB1/INT1 bidirectional Digital I/O (PORTB<1>) with weak pull-up, or external interrupt 1 input (INT1).
48 RB0/INT0 bidirectional Digital I/O (PORTB<0>) with weak pull-up, or external interrupt 0 input (INT0).
49 RD7/PSP7 bidirectional Digital I/O (PORTD<7>) or Parallel Slave Port data bit 7 (PSP7).
50 RD6/PSP6 bidirectional Digital I/O (PORTD<6>) or Parallel Slave Port data bit 6 (PSP6).
51 RD5/PSP5 bidirectional Digital I/O (PORTD<5>) or Parallel Slave Port data bit 5 (PSP5).
52 RD4/PSP4 bidirectional Digital I/O (PORTD<4>) or Parallel Slave Port data bit 4 (PSP4).
53 RD3/PSP3 bidirectional Digital I/O (PORTD<3>) or Parallel Slave Port data bit 3 (PSP3).
54 RD2/PSP2 bidirectional Digital I/O (PORTD<2>) or Parallel Slave Port data bit 2 (PSP2).
55 RD1/PSP1 bidirectional Digital I/O (PORTD<1>) or Parallel Slave Port data bit 1 (PSP1).
56 VSS power_in Ground reference for logic and I/O pins.
57 VDD power_in Positive supply for logic and I/O pins.
58 RD0/PSP0 bidirectional Digital I/O (PORTD<0>) or Parallel Slave Port data bit 0 (PSP0).
59 RE7/CCP2 bidirectional Digital I/O (PORTE<7>) or alternate CCP2 capture input / compare and PWM output, selected when the CCP2MX Configuration bit is cleared.
60 RE6 bidirectional Digital I/O (PORTE<6>), with input tolerance limited to VDD.
61 RE5 bidirectional Digital I/O (PORTE<5>), with input tolerance limited to VDD.
62 RE4 bidirectional Digital I/O (PORTE<4>), with input tolerance limited to VDD.
63 RE3 bidirectional Digital I/O (PORTE<3>), with input tolerance limited to VDD.
64 RE2/CS bidirectional Digital I/O (PORTE<2>) or Parallel Slave Port chip select control input (CS), with input tolerance limited to VDD.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-64(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 64

CAD (KiCad official)

  • Symbol: PIC18F65J11-I
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic18f65j11-i-etched.step / pic18f65j11-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f65j11-i.step / pic18f65j11-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (408 pp, sha256 7edd0fa5dc6a1855, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF