main
Ray
Publish 0.1.0
1f66639
PIC18F63J11-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC18F63J11-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE1/WR | bidirectional | Digital I/O (PORTE<1>) with Schmitt Trigger input; serves as the Parallel Slave Port write enable control input (WR) when PSP is active. |
| 2 | RE0/RD | bidirectional | Digital I/O (PORTE<0>) with Schmitt Trigger input; serves as the Parallel Slave Port read enable control input (RD) when PSP is active. |
| 3 | RG0 | bidirectional | Digital I/O (PORTG<0>) with Schmitt Trigger input; input voltage must not exceed VDD. |
| 4 | RG1/TX2/CK2 | bidirectional | Digital I/O (PORTG<1>) with Schmitt Trigger input; AUSART2 asynchronous transmit (TX2) or synchronous clock (CK2) alternate function; tolerates input levels up to 5.5V. |
| 5 | RG2/RX2/DT2 | bidirectional | Digital I/O (PORTG<2>) with Schmitt Trigger input; AUSART2 asynchronous receive (RX2) or synchronous data (DT2) alternate function; input voltage must not exceed VDD. |
| 6 | RG3 | bidirectional | Digital I/O (PORTG<3>) with Schmitt Trigger input; input voltage must not exceed VDD. |
| 7 | MCLR | input | Active-low Master Clear Reset input, or programming voltage input, to the device. |
| 8 | RG4 | bidirectional | Digital I/O (PORTG<4>) with Schmitt Trigger input; tolerates input levels up to 5.5V. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDDCORE/VCAP | power_in | Core logic supply (VDDCORE) when the regulator is disabled; when the regulator is enabled, external filter capacitor connection, which must not be connected to VDD and must use a 10 µF capacitor to ground. |
| 11 | RF7/AN5/SS | bidirectional | Digital I/O (PORTF<7>) multiplexed with Analog Input 5 and MSSP SPI slave select input (SS); analog-capable pin, input must not exceed VDD. |
| 12 | RF6/AN11 | bidirectional | Digital I/O (PORTF<6>) multiplexed with Analog Input 11 and Comparator C1- input; analog-capable pin, input must not exceed VDD. |
| 13 | RF5/AN10/CVREF | bidirectional | Digital I/O (PORTF<5>) multiplexed with Analog Input 10, Comparator C1+ input, and comparator voltage reference output CVREF; analog-capable pin, input must not exceed VDD. |
| 14 | RF4/AN9 | bidirectional | Digital I/O (PORTF<4>) multiplexed with Analog Input 9 and Comparator C2- input; analog-capable pin, input must not exceed VDD. |
| 15 | RF3/AN8 | bidirectional | Digital I/O (PORTF<3>) multiplexed with Analog Input 8 and Comparator C2+ input; analog-capable pin, input must not exceed VDD. |
| 16 | RF2/AN7/C1OUT | bidirectional | Digital I/O (PORTF<2>) multiplexed with Analog Input 7 and Comparator 1 output (C1OUT); analog-capable pin, input must not exceed VDD. |
| 17 | RF1/AN6/C2OUT | bidirectional | Digital I/O (PORTF<1>) multiplexed with Analog Input 6 and Comparator 2 output (C2OUT); analog-capable pin, input must not exceed VDD. |
| 18 | ENVREG | input | Enable for the on-chip voltage regulator; tie to VDD to enable the regulator or to ground to disable it. |
| 19 | AVDD | power_in | Positive supply for analog modules; must always be connected, regardless of whether the analog modules are used. |
| 20 | AVSS | power_in | Ground reference for analog modules; must always be connected, regardless of whether the analog modules are used. |
| 21 | RA3/AN3/VREF+ | bidirectional | Digital I/O (PORTA<3>) multiplexed with Analog Input 3 and A/D high reference voltage input (VREF+); input must not exceed VDD. |
| 22 | RA2/AN2/VREF- | bidirectional | Digital I/O (PORTA<2>) multiplexed with Analog Input 2 and A/D/comparator low reference voltage input (VREF-); input must not exceed VDD. |
| 23 | RA1/AN1 | bidirectional | Digital I/O (PORTA<1>) multiplexed with Analog Input 1; input must not exceed VDD. |
| 24 | RA0/AN0 | bidirectional | Digital I/O (PORTA<0>) multiplexed with Analog Input 0; input must not exceed VDD. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for logic and I/O pins. |
| 27 | RA5/AN4 | bidirectional | Digital I/O (PORTA<5>) multiplexed with Analog Input 4; input must not exceed VDD. |
| 28 | RA4/T0CKI | bidirectional | Digital I/O (PORTA<4>) with Schmitt Trigger input, open-drain when configured as output; Timer0 external clock input (T0CKI). |
| 29 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O (PORTC<1>) with Schmitt Trigger input; Timer1 oscillator input (T1OSI) and CCP2 capture input / compare-PWM output (default CCP2 assignment when CCP2MX is set). |
| 30 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O (PORTC<0>) with Schmitt Trigger input; Timer1 oscillator output (T1OSO) and Timer1/Timer3 external clock input (T13CKI). |
| 31 | RC6/TX1/CK1 | bidirectional | Digital I/O (PORTC<6>) with Schmitt Trigger input; EUSART asynchronous transmit (TX1) or synchronous clock (CK1). |
| 32 | RC7/RX1/DT1 | bidirectional | Digital I/O (PORTC<7>) with Schmitt Trigger input; EUSART asynchronous receive (RX1) or synchronous data (DT1). |
| 33 | RC2/CCP1 | bidirectional | Digital I/O (PORTC<2>) with Schmitt Trigger input; Capture 1 input, Compare 1 output or PWM1 output (CCP1). |
| 34 | RC3/SCK/SCL | bidirectional | Digital I/O (PORTC<3>) with Schmitt Trigger input; MSSP serial clock for SPI (SCK) or I2C (SCL). |
| 35 | RC4/SDI/SDA | bidirectional | Digital I/O (PORTC<4>) with Schmitt Trigger input; MSSP SPI data input (SDI) or I2C data I/O (SDA). |
| 36 | RC5/SDO | bidirectional | Digital I/O (PORTC<5>) with Schmitt Trigger input; MSSP SPI data output (SDO). |
| 37 | RB7/KBI3/PGD | bidirectional | Digital I/O (PORTB<7>) with weak pull-up and interrupt-on-change input KBI3; ICSP/ICD serial data pin (PGD). |
| 38 | VDD | power_in | Positive supply for logic and I/O pins. |
| 39 | RA7/OSC1/CLKI | bidirectional | Oscillator crystal input or external clock source input (OSC1/CLKI); becomes general purpose digital I/O RA7 when the internal oscillator is the default clock source. |
| 40 | RA6/OSC2/CLKO | bidirectional | Oscillator crystal output (OSC2) or FOSC/4 clock output (CLKO) in EC modes; becomes general purpose digital I/O RA6 when the internal oscillator is the default clock source. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RB6/KBI2/PGC | bidirectional | Digital I/O (PORTB<6>) with weak pull-up and interrupt-on-change input KBI2; ICSP/ICD serial clock input (PGC). |
| 43 | RB5/KBI1 | bidirectional | Digital I/O (PORTB<5>) with weak pull-up and interrupt-on-change input KBI1. |
| 44 | RB4/KBI0 | bidirectional | Digital I/O (PORTB<4>) with weak pull-up and interrupt-on-change input KBI0. |
| 45 | RB3/INT3 | bidirectional | Digital I/O (PORTB<3>) with weak pull-up; External Interrupt 3 input (INT3). |
| 46 | RB2/INT2 | bidirectional | Digital I/O (PORTB<2>) with weak pull-up; External Interrupt 2 input (INT2). |
| 47 | RB1/INT1 | bidirectional | Digital I/O (PORTB<1>) with weak pull-up; External Interrupt 1 input (INT1). |
| 48 | RB0/INT0 | bidirectional | Digital I/O (PORTB<0>) with weak pull-up; External Interrupt 0 input (INT0). |
| 49 | RD7/PSP7 | bidirectional | Digital I/O (PORTD<7>) with Schmitt Trigger input, tolerates up to 5.5V; Parallel Slave Port data bit 7 (PSP7). |
| 50 | RD6/PSP6 | bidirectional | Digital I/O (PORTD<6>) with Schmitt Trigger input, tolerates up to 5.5V; Parallel Slave Port data bit 6 (PSP6). |
| 51 | RD5/PSP5 | bidirectional | Digital I/O (PORTD<5>) with Schmitt Trigger input, tolerates up to 5.5V; Parallel Slave Port data bit 5 (PSP5). |
| 52 | RD4/PSP4 | bidirectional | Digital I/O (PORTD<4>) with Schmitt Trigger input, tolerates up to 5.5V; Parallel Slave Port data bit 4 (PSP4). |
| 53 | RD3/PSP3 | bidirectional | Digital I/O (PORTD<3>) with Schmitt Trigger input, tolerates up to 5.5V; Parallel Slave Port data bit 3 (PSP3). |
| 54 | RD2/PSP2 | bidirectional | Digital I/O (PORTD<2>) with Schmitt Trigger input, tolerates up to 5.5V; Parallel Slave Port data bit 2 (PSP2). |
| 55 | RD1/PSP1 | bidirectional | Digital I/O (PORTD<1>) with Schmitt Trigger input, tolerates up to 5.5V; Parallel Slave Port data bit 1 (PSP1). |
| 56 | VSS | power_in | Ground reference for logic and I/O pins. |
| 57 | VDD | power_in | Positive supply for logic and I/O pins. |
| 58 | RD0/PSP0 | bidirectional | Digital I/O (PORTD<0>) with Schmitt Trigger input, tolerates up to 5.5V; Parallel Slave Port data bit 0 (PSP0). |
| 59 | RE7/CCP2 | bidirectional | Digital I/O (PORTE<7>) with Schmitt Trigger input; CCP2 capture input / compare-PWM output as the alternate CCP2 assignment when the CCP2MX Configuration bit is cleared. |
| 60 | RE6 | bidirectional | Digital I/O (PORTE<6>) with Schmitt Trigger input; tolerates input levels up to 5.5V. |
| 61 | RE5 | bidirectional | Digital I/O (PORTE<5>) with Schmitt Trigger input; tolerates input levels up to 5.5V. |
| 62 | RE4 | bidirectional | Digital I/O (PORTE<4>) with Schmitt Trigger input; tolerates input levels up to 5.5V. |
| 63 | RE3 | bidirectional | Digital I/O (PORTE<3>) with Schmitt Trigger input; tolerates input levels up to 5.5V. |
| 64 | RE2/CS | bidirectional | Digital I/O (PORTE<2>) with Schmitt Trigger input; input must not exceed VDD; Parallel Slave Port chip select control input (CS). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage range | 2 | 3.6 | V | 3 | |||
| Digital-only input tolerance (5.5V tolerant) | 5.5 | V | Digital-only pins; pins with analog functions tolerate only VDD (page 129) | 3 | |||
| Device operating frequency | 40 | MHz | Operating Frequency DC to 40 MHz (Table 1-1) | 11 | |||
| Crystal oscillator frequency (HS/HSPLL modes) | 4 | 25 | MHz | Two crystal modes, 4-25 MHz | 3 | ||
| Internal oscillator (INTOSC 8 MHz) frequency accuracy | -2 | 2 | % | 8 MHz internal oscillator, printed as ±2% accuracy | 9 | ||
| Maximum recommended source impedance for analog inputs | 2.5 | kΩ | Maximum recommended impedance for analog sources (A/D) | 264 | |||
| VCAP/VDDCORE capacitor ESR (regulator enabled) | 5 | Ω | Low-ESR capacitor required on VCAP/VDDCORE when regulator is enabled | 33 | |||
| VCAP/VDDCORE capacitor value (regulator enabled) | 10 | µF | Connected to ground; ceramic or tantalum | 33 | |||
| Run mode current | 7 | µA | 3 | ||||
| Idle mode current | 2.5 | µA | 3 | ||||
| Sleep mode current | 100 | nA | 3 | ||||
| High-current sink capability (PORTB and PORTC) | 25 | mA | PORTB and PORTC high-current sink | 3 | |||
| High-current source capability (PORTB and PORTC) | 25 | mA | PORTB and PORTC high-current source | 3 | |||
| INTRC internal RC oscillator frequency | 31 | kHz | Nominal (approximately), stable over temperature and VDD | 9 | |||
| Power-up Timer (PWRT) period | 65.6 | ms | Approximate, 2048 x 32 µs | 53 | |||
| A/D TAD with RC clock source | 4 | µs | RC source typical TAD time | 265 |
CAD (KiCad official)
- Symbol:
PIC18F63J11-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic18f63j11-i-etched.step/pic18f63j11-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f63j11-i.step/pic18f63j11-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (408 pp, sha256
7edd0fa5dc6a1855, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC18F63J11-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC18F63J11-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE1/WR | bidirectional | Digital I/O (PORTE<1>) with Schmitt Trigger input; serves as the Parallel Slave Port write enable control input (WR) when PSP is active. |
| 2 | RE0/RD | bidirectional | Digital I/O (PORTE<0>) with Schmitt Trigger input; serves as the Parallel Slave Port read enable control input (RD) when PSP is active. |
| 3 | RG0 | bidirectional | Digital I/O (PORTG<0>) with Schmitt Trigger input; input voltage must not exceed VDD. |
| 4 | RG1/TX2/CK2 | bidirectional | Digital I/O (PORTG<1>) with Schmitt Trigger input; AUSART2 asynchronous transmit (TX2) or synchronous clock (CK2) alternate function; tolerates input levels up to 5.5V. |
| 5 | RG2/RX2/DT2 | bidirectional | Digital I/O (PORTG<2>) with Schmitt Trigger input; AUSART2 asynchronous receive (RX2) or synchronous data (DT2) alternate function; input voltage must not exceed VDD. |
| 6 | RG3 | bidirectional | Digital I/O (PORTG<3>) with Schmitt Trigger input; input voltage must not exceed VDD. |
| 7 | MCLR | input | Active-low Master Clear Reset input, or programming voltage input, to the device. |
| 8 | RG4 | bidirectional | Digital I/O (PORTG<4>) with Schmitt Trigger input; tolerates input levels up to 5.5V. |
| 9 | VSS | power_in | Ground reference for logic and I/O pins. |
| 10 | VDDCORE/VCAP | power_in | Core logic supply (VDDCORE) when the regulator is disabled; when the regulator is enabled, external filter capacitor connection, which must not be connected to VDD and must use a 10 µF capacitor to ground. |
| 11 | RF7/AN5/SS | bidirectional | Digital I/O (PORTF<7>) multiplexed with Analog Input 5 and MSSP SPI slave select input (SS); analog-capable pin, input must not exceed VDD. |
| 12 | RF6/AN11 | bidirectional | Digital I/O (PORTF<6>) multiplexed with Analog Input 11 and Comparator C1- input; analog-capable pin, input must not exceed VDD. |
| 13 | RF5/AN10/CVREF | bidirectional | Digital I/O (PORTF<5>) multiplexed with Analog Input 10, Comparator C1+ input, and comparator voltage reference output CVREF; analog-capable pin, input must not exceed VDD. |
| 14 | RF4/AN9 | bidirectional | Digital I/O (PORTF<4>) multiplexed with Analog Input 9 and Comparator C2- input; analog-capable pin, input must not exceed VDD. |
| 15 | RF3/AN8 | bidirectional | Digital I/O (PORTF<3>) multiplexed with Analog Input 8 and Comparator C2+ input; analog-capable pin, input must not exceed VDD. |
| 16 | RF2/AN7/C1OUT | bidirectional | Digital I/O (PORTF<2>) multiplexed with Analog Input 7 and Comparator 1 output (C1OUT); analog-capable pin, input must not exceed VDD. |
| 17 | RF1/AN6/C2OUT | bidirectional | Digital I/O (PORTF<1>) multiplexed with Analog Input 6 and Comparator 2 output (C2OUT); analog-capable pin, input must not exceed VDD. |
| 18 | ENVREG | input | Enable for the on-chip voltage regulator; tie to VDD to enable the regulator or to ground to disable it. |
| 19 | AVDD | power_in | Positive supply for analog modules; must always be connected, regardless of whether the analog modules are used. |
| 20 | AVSS | power_in | Ground reference for analog modules; must always be connected, regardless of whether the analog modules are used. |
| 21 | RA3/AN3/VREF+ | bidirectional | Digital I/O (PORTA<3>) multiplexed with Analog Input 3 and A/D high reference voltage input (VREF+); input must not exceed VDD. |
| 22 | RA2/AN2/VREF- | bidirectional | Digital I/O (PORTA<2>) multiplexed with Analog Input 2 and A/D/comparator low reference voltage input (VREF-); input must not exceed VDD. |
| 23 | RA1/AN1 | bidirectional | Digital I/O (PORTA<1>) multiplexed with Analog Input 1; input must not exceed VDD. |
| 24 | RA0/AN0 | bidirectional | Digital I/O (PORTA<0>) multiplexed with Analog Input 0; input must not exceed VDD. |
| 25 | VSS | power_in | Ground reference for logic and I/O pins. |
| 26 | VDD | power_in | Positive supply for logic and I/O pins. |
| 27 | RA5/AN4 | bidirectional | Digital I/O (PORTA<5>) multiplexed with Analog Input 4; input must not exceed VDD. |
| 28 | RA4/T0CKI | bidirectional | Digital I/O (PORTA<4>) with Schmitt Trigger input, open-drain when configured as output; Timer0 external clock input (T0CKI). |
| 29 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O (PORTC<1>) with Schmitt Trigger input; Timer1 oscillator input (T1OSI) and CCP2 capture input / compare-PWM output (default CCP2 assignment when CCP2MX is set). |
| 30 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O (PORTC<0>) with Schmitt Trigger input; Timer1 oscillator output (T1OSO) and Timer1/Timer3 external clock input (T13CKI). |
| 31 | RC6/TX1/CK1 | bidirectional | Digital I/O (PORTC<6>) with Schmitt Trigger input; EUSART asynchronous transmit (TX1) or synchronous clock (CK1). |
| 32 | RC7/RX1/DT1 | bidirectional | Digital I/O (PORTC<7>) with Schmitt Trigger input; EUSART asynchronous receive (RX1) or synchronous data (DT1). |
| 33 | RC2/CCP1 | bidirectional | Digital I/O (PORTC<2>) with Schmitt Trigger input; Capture 1 input, Compare 1 output or PWM1 output (CCP1). |
| 34 | RC3/SCK/SCL | bidirectional | Digital I/O (PORTC<3>) with Schmitt Trigger input; MSSP serial clock for SPI (SCK) or I2C (SCL). |
| 35 | RC4/SDI/SDA | bidirectional | Digital I/O (PORTC<4>) with Schmitt Trigger input; MSSP SPI data input (SDI) or I2C data I/O (SDA). |
| 36 | RC5/SDO | bidirectional | Digital I/O (PORTC<5>) with Schmitt Trigger input; MSSP SPI data output (SDO). |
| 37 | RB7/KBI3/PGD | bidirectional | Digital I/O (PORTB<7>) with weak pull-up and interrupt-on-change input KBI3; ICSP/ICD serial data pin (PGD). |
| 38 | VDD | power_in | Positive supply for logic and I/O pins. |
| 39 | RA7/OSC1/CLKI | bidirectional | Oscillator crystal input or external clock source input (OSC1/CLKI); becomes general purpose digital I/O RA7 when the internal oscillator is the default clock source. |
| 40 | RA6/OSC2/CLKO | bidirectional | Oscillator crystal output (OSC2) or FOSC/4 clock output (CLKO) in EC modes; becomes general purpose digital I/O RA6 when the internal oscillator is the default clock source. |
| 41 | VSS | power_in | Ground reference for logic and I/O pins. |
| 42 | RB6/KBI2/PGC | bidirectional | Digital I/O (PORTB<6>) with weak pull-up and interrupt-on-change input KBI2; ICSP/ICD serial clock input (PGC). |
| 43 | RB5/KBI1 | bidirectional | Digital I/O (PORTB<5>) with weak pull-up and interrupt-on-change input KBI1. |
| 44 | RB4/KBI0 | bidirectional | Digital I/O (PORTB<4>) with weak pull-up and interrupt-on-change input KBI0. |
| 45 | RB3/INT3 | bidirectional | Digital I/O (PORTB<3>) with weak pull-up; External Interrupt 3 input (INT3). |
| 46 | RB2/INT2 | bidirectional | Digital I/O (PORTB<2>) with weak pull-up; External Interrupt 2 input (INT2). |
| 47 | RB1/INT1 | bidirectional | Digital I/O (PORTB<1>) with weak pull-up; External Interrupt 1 input (INT1). |
| 48 | RB0/INT0 | bidirectional | Digital I/O (PORTB<0>) with weak pull-up; External Interrupt 0 input (INT0). |
| 49 | RD7/PSP7 | bidirectional | Digital I/O (PORTD<7>) with Schmitt Trigger input, tolerates up to 5.5V; Parallel Slave Port data bit 7 (PSP7). |
| 50 | RD6/PSP6 | bidirectional | Digital I/O (PORTD<6>) with Schmitt Trigger input, tolerates up to 5.5V; Parallel Slave Port data bit 6 (PSP6). |
| 51 | RD5/PSP5 | bidirectional | Digital I/O (PORTD<5>) with Schmitt Trigger input, tolerates up to 5.5V; Parallel Slave Port data bit 5 (PSP5). |
| 52 | RD4/PSP4 | bidirectional | Digital I/O (PORTD<4>) with Schmitt Trigger input, tolerates up to 5.5V; Parallel Slave Port data bit 4 (PSP4). |
| 53 | RD3/PSP3 | bidirectional | Digital I/O (PORTD<3>) with Schmitt Trigger input, tolerates up to 5.5V; Parallel Slave Port data bit 3 (PSP3). |
| 54 | RD2/PSP2 | bidirectional | Digital I/O (PORTD<2>) with Schmitt Trigger input, tolerates up to 5.5V; Parallel Slave Port data bit 2 (PSP2). |
| 55 | RD1/PSP1 | bidirectional | Digital I/O (PORTD<1>) with Schmitt Trigger input, tolerates up to 5.5V; Parallel Slave Port data bit 1 (PSP1). |
| 56 | VSS | power_in | Ground reference for logic and I/O pins. |
| 57 | VDD | power_in | Positive supply for logic and I/O pins. |
| 58 | RD0/PSP0 | bidirectional | Digital I/O (PORTD<0>) with Schmitt Trigger input, tolerates up to 5.5V; Parallel Slave Port data bit 0 (PSP0). |
| 59 | RE7/CCP2 | bidirectional | Digital I/O (PORTE<7>) with Schmitt Trigger input; CCP2 capture input / compare-PWM output as the alternate CCP2 assignment when the CCP2MX Configuration bit is cleared. |
| 60 | RE6 | bidirectional | Digital I/O (PORTE<6>) with Schmitt Trigger input; tolerates input levels up to 5.5V. |
| 61 | RE5 | bidirectional | Digital I/O (PORTE<5>) with Schmitt Trigger input; tolerates input levels up to 5.5V. |
| 62 | RE4 | bidirectional | Digital I/O (PORTE<4>) with Schmitt Trigger input; tolerates input levels up to 5.5V. |
| 63 | RE3 | bidirectional | Digital I/O (PORTE<3>) with Schmitt Trigger input; tolerates input levels up to 5.5V. |
| 64 | RE2/CS | bidirectional | Digital I/O (PORTE<2>) with Schmitt Trigger input; input must not exceed VDD; Parallel Slave Port chip select control input (CS). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage range | | 2 | | 3.6 | V | | 3 |
| Digital-only input tolerance (5.5V tolerant) | | | | 5.5 | V | Digital-only pins; pins with analog functions tolerate only VDD (page 129) | 3 |
| Device operating frequency | | | | 40 | MHz | Operating Frequency DC to 40 MHz (Table 1-1) | 11 |
| Crystal oscillator frequency (HS/HSPLL modes) | | 4 | | 25 | MHz | Two crystal modes, 4-25 MHz | 3 |
| Internal oscillator (INTOSC 8 MHz) frequency accuracy | | -2 | | 2 | % | 8 MHz internal oscillator, printed as ±2% accuracy | 9 |
| Maximum recommended source impedance for analog inputs | | | | 2.5 | kΩ | Maximum recommended impedance for analog sources (A/D) | 264 |
| VCAP/VDDCORE capacitor ESR (regulator enabled) | | | | 5 | Ω | Low-ESR capacitor required on VCAP/VDDCORE when regulator is enabled | 33 |
| VCAP/VDDCORE capacitor value (regulator enabled) | | | 10 | | µF | Connected to ground; ceramic or tantalum | 33 |
| Run mode current | | | 7 | | µA | | 3 |
| Idle mode current | | | 2.5 | | µA | | 3 |
| Sleep mode current | | | 100 | | nA | | 3 |
| High-current sink capability (PORTB and PORTC) | | | | 25 | mA | PORTB and PORTC high-current sink | 3 |
| High-current source capability (PORTB and PORTC) | | | | 25 | mA | PORTB and PORTC high-current source | 3 |
| INTRC internal RC oscillator frequency | | | 31 | | kHz | Nominal (approximately), stable over temperature and VDD | 9 |
| Power-up Timer (PWRT) period | | | 65.6 | | ms | Approximate, 2048 x 32 µs | 53 |
| A/D TAD with RC clock source | | | 4 | | µs | RC source typical TAD time | 265 |
## CAD (KiCad official)
- Symbol: `PIC18F63J11-I`
- Footprint: `Package_QFP:TQFP-64_10x10mm_P0.5mm`
- 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `pic18f63j11-i-etched.step` / `pic18f63j11-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic18f63j11-i.step` / `pic18f63j11-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic18f63j11-i-datasheet.pdf) (408 pp, sha256 `7edd0fa5dc6a1855`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic18f63j11-i-datasheet.pdf)