main
Ray pic18f47k40-i-pt: renamed from pic18f47k40-i, the part it was built from (PIC18F47K40-I/PT); family listed 81a4d84

PIC18F47K40-I/PT

Microchip Tech · MICROCHIP · TQFP-44(10x10)

PIC18F47K40-I from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RC7 bidirectional PORTC bit 7 general-purpose I/O with analog input ANC7, interrupt-on-change IOCC7 and weak pull-up; default EUSART1 RX1/DT1 input.
2 RD4 bidirectional PORTD bit 4 general-purpose I/O pin.
3 RD5 bidirectional PORTD bit 5 general-purpose I/O pin.
4 RD6 bidirectional PORTD bit 6 general-purpose I/O pin.
5 RD7 bidirectional PORTD bit 7 general-purpose I/O pin.
6 VSS power_in Ground reference; all VDD and VSS pins must always be connected.
7 VDD power_in Positive supply, 2.3V to 5.5V for PIC18F47K40 (1.8V to 3.6V for the LF part); all VDD and VSS pins must be connected and decoupled with 0.1 uF.
8 RB0 bidirectional PORTB bit 0 general-purpose I/O with analog input ANB0, comparator input C2IN1+, ZCDIN, INT0 and interrupt-on-change IOCB0.
9 RB1 bidirectional PORTB bit 1 general-purpose I/O with analog input ANB1, comparator inputs C1IN3-/C2IN3-, INT1 and interrupt-on-change IOCB1.
10 RB2 bidirectional PORTB bit 2 general-purpose I/O with analog input ANB2, INT2 and interrupt-on-change IOCB2.
11 RB3 bidirectional PORTB bit 3 general-purpose I/O with analog input ANB3, comparator inputs C1IN2-/C2IN2- and interrupt-on-change IOCB3.
12 NC unconnected No connect on the 44-pin TQFP package.
13 NC unconnected No connect on the 44-pin TQFP package.
14 RB4 bidirectional PORTB bit 4 general-purpose I/O with analog input ANB4, interrupt-on-change IOCB4 and Timer5 gate T5G input (PPS).
15 RB5 bidirectional PORTB bit 5 general-purpose I/O with analog input ANB5, interrupt-on-change IOCB5 and Timer1 gate T1G input (PPS).
16 RB6/ICSPCLK bidirectional PORTB bit 6 I/O with analog input ANB6 and interrupt-on-change; ICSPCLK is the in-circuit serial programming/debug clock input.
17 RB7/ICSPDAT bidirectional PORTB bit 7 I/O with analog input ANB7, DAC1OUT2 and interrupt-on-change; ICSPDAT is the bidirectional in-circuit serial programming/debug data pin.
18 RE3/MCLR/VPP input Input-only RE3 with interrupt-on-change; functions as the active-low master clear (MCLR) Reset input and VPP high-voltage programming input, and must be connected.
19 RA0 bidirectional PORTA bit 0 general-purpose I/O with analog input ANA0, comparator inputs C1IN0-/C2IN0- and interrupt-on-change IOCA0.
20 RA1 bidirectional PORTA bit 1 general-purpose I/O with analog input ANA1, comparator inputs C1IN1-/C2IN1- and interrupt-on-change IOCA1.
21 RA2 bidirectional PORTA bit 2 general-purpose I/O with analog input ANA2, DAC1OUT1, Vref- (DAC and ADC) and comparator inputs C1IN0+/C2IN0+.
22 RA3 bidirectional PORTA bit 3 general-purpose I/O with analog input ANA3, Vref+ (DAC), comparator input C1IN1+ and DSM MDCARL input.
23 RA4 bidirectional PORTA bit 4 general-purpose I/O with analog input ANA4, Timer0 clock T0CKI and DSM MDCARH input.
24 RA5 bidirectional PORTA bit 5 general-purpose I/O with analog input ANA5, DSM MDSRC input and MSSP slave select SS1.
25 RE0 bidirectional PORTE bit 0 general-purpose I/O pin.
26 RE1 bidirectional PORTE bit 1 general-purpose I/O pin.
27 RE2 bidirectional PORTE bit 2 general-purpose I/O pin.
28 VDD power_in Positive supply, 2.3V to 5.5V for PIC18F47K40 (1.8V to 3.6V for the LF part); all VDD and VSS pins must be connected and decoupled with 0.1 uF.
29 VSS power_in Ground reference; all VDD and VSS pins must always be connected.
30 RA7 bidirectional PORTA bit 7 general-purpose I/O with analog input ANA7; OSC1/CLKIN external oscillator or clock input.
31 RA6 bidirectional PORTA bit 6 general-purpose I/O with analog input ANA6; OSC2/CLKOUT external oscillator connection or FOSC/4 clock output.
32 RC0 bidirectional PORTC bit 0 general-purpose I/O with analog input ANC0, Timer1/Timer3 clock and gate inputs and SOSCO secondary oscillator output.
33 NC unconnected No connect on the 44-pin TQFP package.
34 NC unconnected No connect on the 44-pin TQFP package.
35 RC1 bidirectional PORTC bit 1 general-purpose I/O with analog input ANC1, CCP2 input and SOSCIN/SOSCI secondary oscillator input.
36 RC2 bidirectional PORTC bit 2 general-purpose I/O with analog input ANC2, Timer5 clock T5CKI and CCP1 input.
37 RC3 bidirectional PORTC bit 3 general-purpose I/O with analog input ANC3, Timer2 input T2IN and MSSP1 SCK1/SCL1 with I2C logic levels.
38 RD0 bidirectional PORTD bit 0 general-purpose I/O pin.
39 RD1 bidirectional PORTD bit 1 general-purpose I/O pin.
40 RD2 bidirectional PORTD bit 2 general-purpose I/O pin.
41 RD3 bidirectional PORTD bit 3 general-purpose I/O pin.
42 RC4 bidirectional PORTC bit 4 general-purpose I/O with analog input ANC4 and MSSP1 SDI1/SDA1 with I2C logic levels.
43 RC5 bidirectional PORTC bit 5 general-purpose I/O with analog input ANC5 and Timer4 input T4IN.
44 RC6 bidirectional PORTC bit 6 general-purpose I/O with analog input ANC6 and EUSART1 clock CK1 (bidirectional).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-44(10x10)
Category Embedded Processors & Controllers
Pins 44

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 736
Storage temperature -65 150 °C 736
Voltage on VDD pin with respect to VSS (PIC18F) VDD -0.3 6.5 V PIC18F27/47K40 736
Voltage on MCLR pin with respect to VSS MCLR -0.3 9 V 736
Maximum current on VSS pin 350 mA -40°C ≤ TA ≤ +85°C 736
Maximum current on VSS pin 120 mA 85°C < TA ≤ +125°C 736
Maximum current on any standard I/O pin -50 50 mA 736
Clamp current IK -20 20 mA VPIN < 0 or VPIN > VDD 736
Total power dissipation 800 mW 736
Operating supply voltage VDD 2.3 5.5 V FOSC ≤ 16 MHz 737
Operating supply voltage VDD 2.5 5.5 V FOSC > 16 MHz 737
Operating supply voltage VDD 3 5.5 V FOSC > 32 MHz 737
Operating ambient temperature (industrial) TA -40 85 °C Industrial temperature range 737
VDD rise rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms BOR or LPBOR disabled 740
External clock frequency, ECH oscillator FECH 64 MHz ECH oscillator 749
External clock frequency, HS oscillator FHS 20 MHz VDD > 2.5V 749
External clock frequency, XT oscillator FXT 4 MHz XT oscillator 749
Secondary oscillator clock frequency FSEC 32.4 32.768 33.1 kHz Note 4 749
System clock frequency FOSC 64 MHz Note 2, Note 3 749
Instruction period TCY 62.5 ns 749
PLL input frequency range FPLLIN 4 16 MHz 752
PLL output frequency range FPLLOUT 16 64 MHz Note 1 752
PLL output frequency stability (jitter) FPLLJIT -0.25 0.25 % 752
Supply current, XT = 4 MHz IDDXT4 550 750 μA XT = 4 MHz, 3.0V 742
Supply current, HFINTOSC = 16 MHz IDDHFO16 2 2.7 mA HFINTOSC = 16 MHz, 3.0V 742
Supply current, HFINTOSC = 64 MHz with PLL IDDHFOPLL 7.5 9.5 mA HFINTOSC = 64 MHz, 3.0V 742
Supply current, HS+PLL = 64 MHz IDDHSPLL64 7 9 mA HS+PLL = 64 MHz, 3.0V 742
Power-down current, IPD base IPD 0.4 4 μA 3.0V, max at +85°C, VREGPM = 1 744
Power-down current, IPD base IPD 0.4 12 μA 3.0V, max at +125°C, VREGPM = 1 744
Power-down current, WDT/low-frequency oscillator IPD_WDT 0.6 5 μA 3.0V, max at +85°C 744
Power-down current, WDT/low-frequency oscillator IPD_WDT 0.6 13 μA 3.0V, max at +125°C 744
Power-down current, secondary oscillator IPD_SOSC 0.8 8.5 μA 3.0V, max at +85°C 744
Power-down current, secondary oscillator IPD_SOSC 0.8 15 μA 3.0V, max at +125°C 744
Power-down current, LPBOR IPD_LPBOR 0.7 5 μA 3.0V, max at +85°C 744
Power-down current, LPBOR IPD_LPBOR 0.7 13 μA 3.0V, max at +125°C 744
Power-down current, FVR IPD_FVR 32 53 μA 3.0V, FVRCON = 0x81 or 0x84, max at +85°C 744
Power-down current, FVR IPD_FVR 32 62 μA 3.0V, FVRCON = 0x81 or 0x84, max at +125°C 744
Power-down current, BOR IPD_BOR 14 19 μA 3.0V, max at +85°C 744
Power-down current, BOR IPD_BOR 14 21 μA 3.0V, max at +125°C 744
Power-down current, comparator IPD_CMP 31 47 μA 3.0V, max at +85°C 744
Power-down current, comparator IPD_CMP 31 50 μA 3.0V, max at +125°C 744
Input low voltage, I/O port with TTL buffer VIL 0.8 V 4.5V≤VDD≤5.5V 745
Input low voltage, I/O port with SMBus levels VIL 0.8 V 2.7V≤VDD≤5.5V 745
Input high voltage, I/O port with TTL buffer VIH 2 V 4.5V≤VDD≤5.5V 745
Input high voltage, I/O port with SMBus levels VIH 2.1 V 2.7V≤VDD≤5.5V 745
Input leakage current, I/O ports IIL -125 5 125 nA VSS≤VPIN≤VDD, pin at high-impedance, 85°C 745
Input leakage current, I/O ports IIL -1000 5 1000 nA VSS≤VPIN≤VDD, pin at high-impedance, 125°C 745
Input leakage current, MCLR IIL -200 50 200 nA VSS≤VPIN≤VDD, pin at high-impedance, 85°C 745
Weak pull-up current IPUR 25 120 200 μA VDD=3.0V, VPIN=VSS 745
Output low voltage, I/O ports VOL 0.6 V IOL=10.0 mA, VDD=3.0V 746
Pin capacitance, all I/O pins CIO 5 50 pF 746
Byte erase and write cycle time TD_BEW 4 5 ms 746
Self-timed row erase or self-timed write time TP_REW 2 2.5 ms 747
Maximum junction temperature TJMAX 150 °C 747
Thermal resistance junction to ambient, 44-pin TQFP θJA 46 °C/W 44-pin TQFP package 747
Thermal resistance junction to case, 44-pin TQFP θJC 14.5 °C/W 44-pin TQFP package 747

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PPS body RxyPPS 315

CAD (KiCad official)

  • Symbol: PIC18F47K40-I
  • Footprint: Package_QFP:TQFP-44_10x10mm_P0.8mm
  • 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic18f47k40-i-etched.step / pic18f47k40-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f47k40-i.step / pic18f47k40-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (818 pp, sha256 be4484b9e8210863, retrieved 2026-11-08, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC18F47K40-I/PT. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC18F47K40-I/MV