← Commit history
README.md+53−58
@@ -8,50 +8,50 @@ PIC18F4685-I from Microchip Tech, in a QFN-44-EP(8x8). Pinout and pin descriptio  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | RC7/RX/DT | bidirectional | Digital I/O with Schmitt Trigger input; EUSART asynchronous receive (RX) or synchronous data (DT) function. |-| 2 | RD4/PSP4/ECCP1/P1A | bidirectional | Digital I/O; Parallel Slave Port data, ECCP1 capture/compare, and ECCP1 Enhanced PWM output channel A (P1A). |-| 3 | RD5/PSP5/P1B | bidirectional | Digital I/O; Parallel Slave Port data and ECCP1 Enhanced PWM output channel B (P1B). |-| 4 | RD6/PSP6/P1C | bidirectional | Digital I/O; Parallel Slave Port data and ECCP1 Enhanced PWM output channel C (P1C). |-| 5 | RD7/PSP7/P1D | bidirectional | Digital I/O; Parallel Slave Port data and ECCP1 Enhanced PWM output channel D (P1D). |+| 1 | RC7/RX/DT | bidirectional | Digital I/O with Schmitt Trigger input; serves as EUSART asynchronous receive input or synchronous data I/O. |+| 2 | RD4/PSP4/ECCP1/P1A | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data (TTL inputs when PSP enabled), ECCP1 capture/compare, and ECCP1 PWM output channel A. |+| 3 | RD5/PSP5/P1B | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data or ECCP1 Enhanced PWM output channel B. |+| 4 | RD6/PSP6/P1C | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data or ECCP1 Enhanced PWM output channel C. |+| 5 | RD7/PSP7/P1D | bidirectional | Digital I/O with Schmitt Trigger input; also Parallel Slave Port data or ECCP1 Enhanced PWM output channel D. | | 6 | VSS | power_in | Ground reference for logic and I/O pins. | | 7 | VDD | power_in | Positive supply for logic and I/O pins. | | 8 | VDD | power_in | Positive supply for logic and I/O pins. |-| 9 | RB0/INT0/FLT0/AN10 | bidirectional | Digital I/O with weak pull-up; external interrupt 0, ECCP1 Enhanced PWM Fault input, and analog input 10. |-| 10 | RB1/INT1/AN8 | bidirectional | Digital I/O with weak pull-up; external interrupt 1 and analog input 8. |-| 11 | RB2/INT2/CANTX | bidirectional | Digital I/O with weak pull-up; external interrupt 2 and CAN bus transmit output (CANTX). |-| 12 | RB3/CANRX | bidirectional | Digital I/O with weak pull-up; CAN bus receive input, which requires TRISB<3> set to 1 when CAN is enabled. |+| 9 | RB0/INT0/FLT0/AN10 | bidirectional | Digital I/O with weak pull-up available in input mode; external interrupt 0, ECCP1 Enhanced PWM Fault input, or analog input 10. |+| 10 | RB1/INT1/AN8 | bidirectional | Digital I/O with weak pull-up available in input mode; external interrupt 1 or analog input 8. |+| 11 | RB2/INT2/CANTX | bidirectional | Digital I/O with weak pull-up available in input mode; external interrupt 2 or CAN bus transmit output. |+| 12 | RB3/CANRX | bidirectional | Digital I/O with weak pull-up available in input mode; CAN bus receive input, which must be configured as a digital input (TRISB<3> set) when CAN is enabled. | | 13 | NC | unconnected | No connect. |-| 14 | RB4/KBI0/AN9 | bidirectional | Digital I/O with weak pull-up; interrupt-on-pin change KBI0 and analog input 9. |-| 15 | RB5/KBI1/PGM | bidirectional | Digital I/O with weak pull-up; interrupt-on-pin change KBI1 and low-voltage ICSP programming enable (PGM). |-| 16 | RB6/KBI2/PGC | bidirectional | Digital I/O with weak pull-up; interrupt-on-pin change KBI2 and In-Circuit Debugger / ICSP programming clock (PGC). |-| 17 | RB7/KBI3/PGD | bidirectional | Digital I/O with weak pull-up; interrupt-on-pin change KBI3 and In-Circuit Debugger / ICSP programming data (PGD). |-| 18 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input, or programming voltage input (VPP) for ICSP; RE3 is a digital input when MCLR is disabled. |-| 19 | RA0/AN0/CVREF | bidirectional | Digital I/O; analog input 0 and analog comparator reference output (CVREF). |+| 14 | RB4/KBI0/AN9 | bidirectional | Digital I/O with weak pull-up available in input mode; interrupt-on-pin-change input or analog input 9. |+| 15 | RB5/KBI1/PGM | bidirectional | Digital I/O with weak pull-up available in input mode; interrupt-on-pin-change input or Low-Voltage ICSP programming enable pin. |+| 16 | RB6/KBI2/PGC | bidirectional | Digital I/O with weak pull-up available in input mode; interrupt-on-pin-change input or In-Circuit Debugger and ICSP programming clock pin. |+| 17 | RB7/KBI3/PGD | bidirectional | Digital I/O with weak pull-up available in input mode; interrupt-on-pin-change input or In-Circuit Debugger and ICSP programming data pin. |+| 18 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input when MCLR is enabled; programming voltage input for ICSP; becomes digital input RE3 when MCLR is disabled. |+| 19 | RA0/AN0/CVREF | bidirectional | Digital I/O; analog input 0 or analog comparator reference voltage output. | | 20 | RA1/AN1 | bidirectional | Digital I/O; analog input 1. |-| 21 | RA2/AN2/VREF- | bidirectional | Digital I/O; analog input 2 and A/D reference voltage (low) input (VREF-). |-| 22 | RA3/AN3/VREF+ | bidirectional | Digital I/O; analog input 3 and A/D reference voltage (high) input (VREF+). |-| 23 | RA4/T0CKI | bidirectional | Digital I/O; Timer0 external clock input (Schmitt Trigger). |-| 24 | RA5/AN4/SS/HLVDIN | bidirectional | Digital I/O; analog input 4, MSSP SPI slave select input, and High/Low-Voltage Detect external trip point input (HLVDIN). |-| 25 | RE0/RD/AN5 | bidirectional | Digital I/O; Parallel Slave Port read enable input (RD) and analog input 5. |-| 26 | RE1/WR/AN6/C1OUT | bidirectional | Digital I/O; Parallel Slave Port write enable input (WR), analog input 6, and Comparator 1 output (C1OUT). |-| 27 | RE2/CS/AN7/C2OUT | bidirectional | Digital I/O; Parallel Slave Port chip select input (CS), analog input 7, and Comparator 2 output (C2OUT). |+| 21 | RA2/AN2/VREF- | bidirectional | Digital I/O; analog input 2 or A/D reference voltage (low) input. |+| 22 | RA3/AN3/VREF+ | bidirectional | Digital I/O; analog input 3 or A/D reference voltage (high) input. |+| 23 | RA4/T0CKI | bidirectional | Digital I/O with Schmitt Trigger input; Timer0 external clock input. |+| 24 | RA5/AN4/SS/HLVDIN | bidirectional | Digital I/O; analog input 4, SPI slave select input, or High/Low-Voltage Detect external trip point input. |+| 25 | RE0/RD/AN5 | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port read enable input or analog input 5. |+| 26 | RE1/WR/AN6/C1OUT | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port write enable input, analog input 6, or Comparator 1 output. |+| 27 | RE2/CS/AN7/C2OUT | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port chip select input, analog input 7, or Comparator 2 output. | | 28 | VDD | power_in | Positive supply for logic and I/O pins. | | 29 | VDD | power_in | Positive supply for logic and I/O pins. | | 30 | VSS | power_in | Ground reference for logic and I/O pins. | | 31 | VSS | power_in | Ground reference for logic and I/O pins. |-| 32 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input (CLKI) in oscillator modes; general purpose I/O RA7 when not used as oscillator input. |-| 33 | OSC2/CLKO/RA6 | output | Oscillator crystal output or CLKO (FOSC/4) output in RC/EC modes; general purpose I/O RA6 when not used as oscillator output. |-| 34 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O with Schmitt Trigger input; Timer1 oscillator output (T1OSO) and Timer1/Timer3 external clock input (T13CKI). |-| 35 | RC1/T1OSI | bidirectional | Digital I/O with Schmitt Trigger input; Timer1 oscillator input (T1OSI). |+| 32 | OSC1/CLKI/RA7 | bidirectional | Oscillator crystal or external clock input in oscillator modes; becomes general purpose I/O RA7 when not used by the oscillator. |+| 33 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output or CLKO (FOSC/4) output in RC mode; becomes general purpose I/O RA6 when not used by the oscillator. |+| 34 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O with Schmitt Trigger input; Timer1 oscillator output or Timer1/Timer3 external clock input. |+| 35 | RC1/T1OSI | bidirectional | Digital I/O with Schmitt Trigger input; Timer1 oscillator input. | | 36 | RC2/CCP1 | bidirectional | Digital I/O with Schmitt Trigger input; CCP1 capture input, compare output, or PWM output. |-| 37 | RC3/SCK/SCL | bidirectional | Digital I/O with Schmitt Trigger input; MSSP SPI serial clock input/output (SCK) or I2C serial clock (SCL). |-| 38 | RD0/PSP0/C1IN+ | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port data and Comparator 1 positive input (C1IN+). |-| 39 | RD1/PSP1/C1IN- | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port data and Comparator 1 negative input (C1IN-). |-| 40 | RD2/PSP2/C2IN+ | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port data and Comparator 2 positive input (C2IN+). |-| 41 | RD3/PSP3/C2IN- | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port data and Comparator 2 negative input (C2IN-). |-| 42 | RC4/SDI/SDA | bidirectional | Digital I/O with Schmitt Trigger input; MSSP SPI data input (SDI) or I2C data I/O (SDA). |-| 43 | RC5/SDO | bidirectional | Digital I/O with Schmitt Trigger input; MSSP SPI data output (SDO). |-| 44 | RC6/TX/CK | bidirectional | Digital I/O with Schmitt Trigger input; EUSART asynchronous transmit (TX) or synchronous clock (CK). |+| 37 | RC3/SCK/SCL | bidirectional | Digital I/O with Schmitt Trigger input; synchronous serial clock input/output for SPI mode or I2C mode. |+| 38 | RD0/PSP0/C1IN+ | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port data or Comparator 1 positive input (B). |+| 39 | RD1/PSP1/C1IN- | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port data or Comparator 1 negative input. |+| 40 | RD2/PSP2/C2IN+ | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port data or Comparator 2 positive input. |+| 41 | RD3/PSP3/C2IN- | bidirectional | Digital I/O with Schmitt Trigger input; Parallel Slave Port data or Comparator 2 negative input. |+| 42 | RC4/SDI/SDA | bidirectional | Digital I/O with Schmitt Trigger input; SPI data input or I2C data I/O. |+| 43 | RC5/SDO | bidirectional | Digital I/O with Schmitt Trigger input; SPI data output. |+| 44 | RC6/TX/CK | bidirectional | Digital I/O with Schmitt Trigger input; EUSART asynchronous transmit or synchronous clock. | | 45 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |  ## Key specifications@@ -69,29 +69,24 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| HLVD trip point VDD high-to-low, HLVDL<3:0> = 0000 (D420) | VLVD | 2.12 | 2.17 | 2.22 | V | HLVDL<3:0> = 0000 | 434 |-| HLVD trip point VDD high-to-low, HLVDL<3:0> = 0001 (D420) | VLVD | 2.18 | 2.23 | 2.28 | V | HLVDL<3:0> = 0001 | 434 |-| HLVD trip point VDD high-to-low, HLVDL<3:0> = 0010 (D420) | VLVD | 2.31 | 2.36 | 2.42 | V | HLVDL<3:0> = 0010 | 434 |-| HLVD trip point VDD high-to-low, HLVDL<3:0> = 0011 (D420) | VLVD | 2.38 | 2.44 | 2.49 | V | HLVDL<3:0> = 0011 | 434 |-| HLVD trip point VDD high-to-low, HLVDL<3:0> = 0100 (D420) | VLVD | 2.54 | 2.6 | 2.66 | V | HLVDL<3:0> = 0100 | 434 |-| HLVD trip point VDD high-to-low, HLVDL<3:0> = 0101 (D420) | VLVD | 2.72 | 2.79 | 2.85 | V | HLVDL<3:0> = 0101 | 434 |-| HLVD trip point VDD high-to-low, HLVDL<3:0> = 0110 (D420) | VLVD | 2.82 | 2.89 | 2.95 | V | HLVDL<3:0> = 0110 | 434 |-| HLVD trip point VDD high-to-low, HLVDL<3:0> = 0111 (D420) | VLVD | 3.05 | 3.12 | 3.19 | V | HLVDL<3:0> = 0111 | 434 |-| HLVD trip point VDD high-to-low, HLVDL<3:0> = 1000 (D420) | VLVD | 3.31 | 3.39 | 3.47 | V | HLVDL<3:0> = 1000 | 434 |-| HLVD trip point VDD high-to-low, HLVDL<3:0> = 1001 (D420) | VLVD | 3.46 | 3.55 | 3.63 | V | HLVDL<3:0> = 1001 | 434 |-| HLVD trip point VDD high-to-low, HLVDL<3:0> = 1010 (D420) | VLVD | 3.63 | 3.71 | 3.8 | V | HLVDL<3:0> = 1010 | 434 |-| HLVD trip point VDD high-to-low, HLVDL<3:0> = 1011 (D420) | VLVD | 3.81 | 3.9 | 3.99 | V | HLVDL<3:0> = 1011 | 434 |-| HLVD trip point VDD high-to-low, HLVDL<3:0> = 1100 (D420) | VLVD | 4.01 | 4.11 | 4.2 | V | HLVDL<3:0> = 1100 | 434 |-| HLVD trip point VDD high-to-low, HLVDL<3:0> = 1101 (D420) | VLVD | 4.23 | 4.33 | 4.43 | V | HLVDL<3:0> = 1101 | 434 |-| HLVD trip point VDD high-to-low, HLVDL<3:0> = 1110 (D420) | VLVD | 4.48 | 4.59 | 4.69 | V | HLVDL<3:0> = 1110 | 434 |-| HLVD trip point VDD high-to-low, HLVDL<3:0> = 1111 (D420) | VLVD | 1.14 | 1.2 | 1.26 | V | HLVDL<3:0> = 1111 | 434 |-| Device VDD range, standard voltage (F) device | VDD | 4.2 |  | 5.5 | V | PIC18F device (no LF suffix), per product identification system | 483 |-| Operating temperature, industrial (-I) | TA | -40 |  | 85 | °C | Industrial temperature range (-I suffix) | 483 |-| Maximum operating frequency | FMAX |  |  | 40 | MHz | Voltage-frequency graph (Figure 27-1), PIC18F268X/468X, industrial | 420 |-| External RC oscillator resistor REXT | REXT | 3 |  | 100 | kΩ | RC / RCIO oscillator mode, recommended values | 27 |-| External RC oscillator capacitor CEXT | CEXT | 20 |  |  | pF | RC / RCIO oscillator mode, CEXT > 20 pF recommended | 27 |-| Maximum recommended analog source impedance |  |  |  | 2.5 | kΩ | A/D analog input source impedance, maximum recommended | 254 |-| MCLR pull-up resistor to VDD |  | 1 |  | 10 | kΩ | Recommended resistor from MCLR to VDD for Power-on Reset | 45 |+| HLVD trip voltage, VDD high-to-low (HLVDL<3:0>=0000) | VLVD | 2.12 | 2.17 | 2.22 | V | D420, HLVDL<3:0> = 0000; standard operating conditions, -40°C ≤ TA ≤ +85°C | 434 |+| HLVD trip voltage, VDD high-to-low (HLVDL<3:0>=0001) | VLVD | 2.18 | 2.23 | 2.28 | V | D420, HLVDL<3:0> = 0001; standard operating conditions, -40°C ≤ TA ≤ +85°C | 434 |+| HLVD trip voltage, VDD high-to-low (HLVDL<3:0>=0010) | VLVD | 2.31 | 2.36 | 2.42 | V | D420, HLVDL<3:0> = 0010; standard operating conditions, -40°C ≤ TA ≤ +85°C | 434 |+| HLVD trip voltage, VDD high-to-low (HLVDL<3:0>=0011) | VLVD | 2.38 | 2.44 | 2.49 | V | D420, HLVDL<3:0> = 0011; standard operating conditions, -40°C ≤ TA ≤ +85°C | 434 |+| HLVD trip voltage, VDD high-to-low (HLVDL<3:0>=0100) | VLVD | 2.54 | 2.6 | 2.66 | V | D420, HLVDL<3:0> = 0100; standard operating conditions, -40°C ≤ TA ≤ +85°C | 434 |+| HLVD trip voltage, VDD high-to-low (HLVDL<3:0>=0101) | VLVD | 2.72 | 2.79 | 2.85 | V | D420, HLVDL<3:0> = 0101; standard operating conditions, -40°C ≤ TA ≤ +85°C | 434 |+| HLVD trip voltage, VDD high-to-low (HLVDL<3:0>=0110) | VLVD | 2.82 | 2.89 | 2.95 | V | D420, HLVDL<3:0> = 0110; standard operating conditions, -40°C ≤ TA ≤ +85°C | 434 |+| HLVD trip voltage, VDD high-to-low (HLVDL<3:0>=0111) | VLVD | 3.05 | 3.12 | 3.19 | V | D420, HLVDL<3:0> = 0111; standard operating conditions, -40°C ≤ TA ≤ +85°C | 434 |+| HLVD trip voltage, VDD high-to-low (HLVDL<3:0>=1000) | VLVD | 3.31 | 3.39 | 3.47 | V | D420, HLVDL<3:0> = 1000; standard operating conditions, -40°C ≤ TA ≤ +85°C | 434 |+| HLVD trip voltage, VDD high-to-low (HLVDL<3:0>=1001) | VLVD | 3.46 | 3.55 | 3.63 | V | D420, HLVDL<3:0> = 1001; standard operating conditions, -40°C ≤ TA ≤ +85°C | 434 |+| HLVD trip voltage, VDD high-to-low (HLVDL<3:0>=1010) | VLVD | 3.63 | 3.71 | 3.8 | V | D420, HLVDL<3:0> = 1010; standard operating conditions, -40°C ≤ TA ≤ +85°C | 434 |+| HLVD trip voltage, VDD high-to-low (HLVDL<3:0>=1011) | VLVD | 3.81 | 3.9 | 3.99 | V | D420, HLVDL<3:0> = 1011; standard operating conditions, -40°C ≤ TA ≤ +85°C | 434 |+| HLVD trip voltage, VDD high-to-low (HLVDL<3:0>=1100) | VLVD | 4.01 | 4.11 | 4.2 | V | D420, HLVDL<3:0> = 1100; standard operating conditions, -40°C ≤ TA ≤ +85°C | 434 |+| HLVD trip voltage, VDD high-to-low (HLVDL<3:0>=1101) | VLVD | 4.23 | 4.33 | 4.43 | V | D420, HLVDL<3:0> = 1101; standard operating conditions, -40°C ≤ TA ≤ +85°C | 434 |+| HLVD trip voltage, VDD high-to-low (HLVDL<3:0>=1110) | VLVD | 4.48 | 4.59 | 4.69 | V | D420, HLVDL<3:0> = 1110; standard operating conditions, -40°C ≤ TA ≤ +85°C | 434 |+| HLVD trip voltage, VDD high-to-low (HLVDL<3:0>=1111, external HLVDIN) | VLVD | 1.14 | 1.2 | 1.26 | V | D420, HLVDL<3:0> = 1111; standard operating conditions, -40°C ≤ TA ≤ +85°C | 434 |+| Operating temperature range (industrial) | TA | -40 |  | 85 | °C | Industrial range (suffix -I); standard operating conditions | 434 |+| Supply voltage VDD (standard voltage range, F device) | VDD | 4.2 |  | 5.5 | V | PIC18F4685 standard voltage range (F, not LF); as stated in the part-number description | 483 |  ## CAD (land: KiCad; 3D: generated from the datasheet) @@ -104,7 +99,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/39761c.pdf) (484 pp, sha256 `2430cb8c5a6c7676`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/39761c.pdf) (484 pp, sha256 `2430cb8c5a6c7676`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated). 
package.json+46−45
@@ -1,6 +1,6 @@ {   "slug": "pic18f4685-i-ml",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Microchip Tech Pre-ordered MCUs, QFN-44-EP(8x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -53,7 +53,7 @@       "mouser": "579-PIC18F4685-I/ML"     },     "distributor_check": {-      "checked_at": "2026-11-12T22:07:45Z",+      "checked_at": "2026-11-13T02:37:45Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC18F4685-I/ML-ND",@@ -70,31 +70,31 @@         "number": "1",         "name": "RC7/RX/DT",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; EUSART asynchronous receive (RX) or synchronous data (DT) function."+        "description": "Digital I/O with Schmitt Trigger input; serves as EUSART asynchronous receive input or synchronous data I/O."       },       {         "number": "2",         "name": "RD4/PSP4/ECCP1/P1A",         "type": "bidirectional",-        "description": "Digital I/O; Parallel Slave Port data, ECCP1 capture/compare, and ECCP1 Enhanced PWM output channel A (P1A)."+        "description": "Digital I/O with Schmitt Trigger input; also Parallel Slave Port data (TTL inputs when PSP enabled), ECCP1 capture/compare, and ECCP1 PWM output channel A."       },       {         "number": "3",         "name": "RD5/PSP5/P1B",         "type": "bidirectional",-        "description": "Digital I/O; Parallel Slave Port data and ECCP1 Enhanced PWM output channel B (P1B)."+        "description": "Digital I/O with Schmitt Trigger input; also Parallel Slave Port data or ECCP1 Enhanced PWM output channel B."       },       {         "number": "4",         "name": "RD6/PSP6/P1C",         "type": "bidirectional",-        "description": "Digital I/O; Parallel Slave Port data and ECCP1 Enhanced PWM output channel C (P1C)."+        "description": "Digital I/O with Schmitt Trigger input; also Parallel Slave Port data or ECCP1 Enhanced PWM output channel C."       },       {         "number": "5",         "name": "RD7/PSP7/P1D",         "type": "bidirectional",-        "description": "Digital I/O; Parallel Slave Port data and ECCP1 Enhanced PWM output channel D (P1D)."+        "description": "Digital I/O with Schmitt Trigger input; also Parallel Slave Port data or ECCP1 Enhanced PWM output channel D."       },       {         "number": "6",@@ -118,25 +118,25 @@         "number": "9",         "name": "RB0/INT0/FLT0/AN10",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up; external interrupt 0, ECCP1 Enhanced PWM Fault input, and analog input 10."+        "description": "Digital I/O with weak pull-up available in input mode; external interrupt 0, ECCP1 Enhanced PWM Fault input, or analog input 10."       },       {         "number": "10",         "name": "RB1/INT1/AN8",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up; external interrupt 1 and analog input 8."+        "description": "Digital I/O with weak pull-up available in input mode; external interrupt 1 or analog input 8."       },       {         "number": "11",         "name": "RB2/INT2/CANTX",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up; external interrupt 2 and CAN bus transmit output (CANTX)."+        "description": "Digital I/O with weak pull-up available in input mode; external interrupt 2 or CAN bus transmit output."       },       {         "number": "12",         "name": "RB3/CANRX",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up; CAN bus receive input, which requires TRISB<3> set to 1 when CAN is enabled."+        "description": "Digital I/O with weak pull-up available in input mode; CAN bus receive input, which must be configured as a digital input (TRISB<3> set) when CAN is enabled."       },       {         "number": "13",@@ -148,37 +148,37 @@         "number": "14",         "name": "RB4/KBI0/AN9",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up; interrupt-on-pin change KBI0 and analog input 9."+        "description": "Digital I/O with weak pull-up available in input mode; interrupt-on-pin-change input or analog input 9."       },       {         "number": "15",         "name": "RB5/KBI1/PGM",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up; interrupt-on-pin change KBI1 and low-voltage ICSP programming enable (PGM)."+        "description": "Digital I/O with weak pull-up available in input mode; interrupt-on-pin-change input or Low-Voltage ICSP programming enable pin."       },       {         "number": "16",         "name": "RB6/KBI2/PGC",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up; interrupt-on-pin change KBI2 and In-Circuit Debugger / ICSP programming clock (PGC)."+        "description": "Digital I/O with weak pull-up available in input mode; interrupt-on-pin-change input or In-Circuit Debugger and ICSP programming clock pin."       },       {         "number": "17",         "name": "RB7/KBI3/PGD",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up; interrupt-on-pin change KBI3 and In-Circuit Debugger / ICSP programming data (PGD)."+        "description": "Digital I/O with weak pull-up available in input mode; interrupt-on-pin-change input or In-Circuit Debugger and ICSP programming data pin."       },       {         "number": "18",         "name": "MCLR/VPP/RE3",         "type": "input",-        "description": "Active-low Master Clear (Reset) input, or programming voltage input (VPP) for ICSP; RE3 is a digital input when MCLR is disabled."+        "description": "Active-low Master Clear (Reset) input when MCLR is enabled; programming voltage input for ICSP; becomes digital input RE3 when MCLR is disabled."       },       {         "number": "19",         "name": "RA0/AN0/CVREF",         "type": "bidirectional",-        "description": "Digital I/O; analog input 0 and analog comparator reference output (CVREF)."+        "description": "Digital I/O; analog input 0 or analog comparator reference voltage output."       },       {         "number": "20",@@ -190,43 +190,43 @@         "number": "21",         "name": "RA2/AN2/VREF-",         "type": "bidirectional",-        "description": "Digital I/O; analog input 2 and A/D reference voltage (low) input (VREF-)."+        "description": "Digital I/O; analog input 2 or A/D reference voltage (low) input."       },       {         "number": "22",         "name": "RA3/AN3/VREF+",         "type": "bidirectional",-        "description": "Digital I/O; analog input 3 and A/D reference voltage (high) input (VREF+)."+        "description": "Digital I/O; analog input 3 or A/D reference voltage (high) input."       },       {         "number": "23",         "name": "RA4/T0CKI",         "type": "bidirectional",-        "description": "Digital I/O; Timer0 external clock input (Schmitt Trigger)."+        "description": "Digital I/O with Schmitt Trigger input; Timer0 external clock input."       },       {         "number": "24",         "name": "RA5/AN4/SS/HLVDIN",         "type": "bidirectional",-        "description": "Digital I/O; analog input 4, MSSP SPI slave select input, and High/Low-Voltage Detect external trip point input (HLVDIN)."+        "description": "Digital I/O; analog input 4, SPI slave select input, or High/Low-Voltage Detect external trip point input."       },       {         "number": "25",         "name": "RE0/RD/AN5",         "type": "bidirectional",-        "description": "Digital I/O; Parallel Slave Port read enable input (RD) and analog input 5."+        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port read enable input or analog input 5."       },       {         "number": "26",         "name": "RE1/WR/AN6/C1OUT",         "type": "bidirectional",-        "description": "Digital I/O; Parallel Slave Port write enable input (WR), analog input 6, and Comparator 1 output (C1OUT)."+        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port write enable input, analog input 6, or Comparator 1 output."       },       {         "number": "27",         "name": "RE2/CS/AN7/C2OUT",         "type": "bidirectional",-        "description": "Digital I/O; Parallel Slave Port chip select input (CS), analog input 7, and Comparator 2 output (C2OUT)."+        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port chip select input, analog input 7, or Comparator 2 output."       },       {         "number": "28",@@ -255,26 +255,26 @@       {         "number": "32",         "name": "OSC1/CLKI/RA7",-        "type": "input",-        "description": "Oscillator crystal or external clock input (CLKI) in oscillator modes; general purpose I/O RA7 when not used as oscillator input."+        "type": "bidirectional",+        "description": "Oscillator crystal or external clock input in oscillator modes; becomes general purpose I/O RA7 when not used by the oscillator."       },       {         "number": "33",         "name": "OSC2/CLKO/RA6",-        "type": "output",-        "description": "Oscillator crystal output or CLKO (FOSC/4) output in RC/EC modes; general purpose I/O RA6 when not used as oscillator output."+        "type": "bidirectional",+        "description": "Oscillator crystal output or CLKO (FOSC/4) output in RC mode; becomes general purpose I/O RA6 when not used by the oscillator."       },       {         "number": "34",         "name": "RC0/T1OSO/T13CKI",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Timer1 oscillator output (T1OSO) and Timer1/Timer3 external clock input (T13CKI)."+        "description": "Digital I/O with Schmitt Trigger input; Timer1 oscillator output or Timer1/Timer3 external clock input."       },       {         "number": "35",         "name": "RC1/T1OSI",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Timer1 oscillator input (T1OSI)."+        "description": "Digital I/O with Schmitt Trigger input; Timer1 oscillator input."       },       {         "number": "36",@@ -286,49 +286,49 @@         "number": "37",         "name": "RC3/SCK/SCL",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; MSSP SPI serial clock input/output (SCK) or I2C serial clock (SCL)."+        "description": "Digital I/O with Schmitt Trigger input; synchronous serial clock input/output for SPI mode or I2C mode."       },       {         "number": "38",         "name": "RD0/PSP0/C1IN+",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port data and Comparator 1 positive input (C1IN+)."+        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port data or Comparator 1 positive input (B)."       },       {         "number": "39",         "name": "RD1/PSP1/C1IN-",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port data and Comparator 1 negative input (C1IN-)."+        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port data or Comparator 1 negative input."       },       {         "number": "40",         "name": "RD2/PSP2/C2IN+",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port data and Comparator 2 positive input (C2IN+)."+        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port data or Comparator 2 positive input."       },       {         "number": "41",         "name": "RD3/PSP3/C2IN-",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port data and Comparator 2 negative input (C2IN-)."+        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port data or Comparator 2 negative input."       },       {         "number": "42",         "name": "RC4/SDI/SDA",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; MSSP SPI data input (SDI) or I2C data I/O (SDA)."+        "description": "Digital I/O with Schmitt Trigger input; SPI data input or I2C data I/O."       },       {         "number": "43",         "name": "RC5/SDO",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; MSSP SPI data output (SDO)."+        "description": "Digital I/O with Schmitt Trigger input; SPI data output."       },       {         "number": "44",         "name": "RC6/TX/CK",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; EUSART asynchronous transmit (TX) or synchronous clock (CK)."+        "description": "Digital I/O with Schmitt Trigger input; EUSART asynchronous transmit or synchronous clock."       },       {         "number": "45",@@ -348,11 +348,12 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet text gives no pin number for the QFN exposed thermal pad (EP) and does not state how i; The QFN pin numbers come from the PIC18F4682/4685 column of Table 1-3 (page 18-23), and the QFN pin ; The schema has no field for electrical specifications, so no spec values (supply range, currents, te"+          "extractor flagged: The exposed thermal pad of the QFN-44-EP(8x8) package is not given a pin number anywhere in the extr; Pins with multiple functions are typed by their primary I/O function (bidirectional). MCLR/VPP/RE3 i; Pin numbers come from the 44-pin QFN column of Table 1-3 (pages 18-23). The datasheet notes 'Pinouts",+          "exposed pad 45 added from the footprint"         ],         "pages_sent": 70,-        "cost_usd": 0.0728,-        "at": "2026-11-12T22:07:29"+        "cost_usd": 0.0582,+        "at": "2026-11-13T02:37:29"       },       "datasheet": {         "url": "https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/39761c.pdf",@@ -395,8 +396,8 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "51bddd8ccc7c3911119802324a6204df301a87bbb2b7b85ef761c9b55bde7b4c",-        "checked": "2026-11-12",+        "sha256": "9534b4927e055385e152d193a8949c0803aed8ba235367fee0efb7030727232e",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -414,8 +415,8 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "f82b8d9c065717c688d5d5118ca2244a732245a80d90eb94a53cfb00eb1c8cf9",-        "checked": "2026-11-12",+        "sha256": "3b785170e485a71a318d0bd0b878e1bafe184b89b5eaa413f0c1a88ff2120870",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+49−46
@@ -4,7 +4,7 @@   "slug": "pic18f4685-i-ml",   "title": "PIC18F4685-I/ML",   "brief": "Microchip Tech Pre-ordered MCUs, QFN-44-EP(8x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "579-PIC18F4685-I/ML"     },     "distributor_check": {-      "checked_at": "2026-11-12T22:07:45Z",+      "checked_at": "2026-11-13T02:37:45Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC18F4685-I/ML-ND",@@ -53,31 +53,31 @@         "number": "1",         "name": "RC7/RX/DT",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; EUSART asynchronous receive (RX) or synchronous data (DT) function."+        "description": "Digital I/O with Schmitt Trigger input; serves as EUSART asynchronous receive input or synchronous data I/O."       },       {         "number": "2",         "name": "RD4/PSP4/ECCP1/P1A",         "type": "bidirectional",-        "description": "Digital I/O; Parallel Slave Port data, ECCP1 capture/compare, and ECCP1 Enhanced PWM output channel A (P1A)."+        "description": "Digital I/O with Schmitt Trigger input; also Parallel Slave Port data (TTL inputs when PSP enabled), ECCP1 capture/compare, and ECCP1 PWM output channel A."       },       {         "number": "3",         "name": "RD5/PSP5/P1B",         "type": "bidirectional",-        "description": "Digital I/O; Parallel Slave Port data and ECCP1 Enhanced PWM output channel B (P1B)."+        "description": "Digital I/O with Schmitt Trigger input; also Parallel Slave Port data or ECCP1 Enhanced PWM output channel B."       },       {         "number": "4",         "name": "RD6/PSP6/P1C",         "type": "bidirectional",-        "description": "Digital I/O; Parallel Slave Port data and ECCP1 Enhanced PWM output channel C (P1C)."+        "description": "Digital I/O with Schmitt Trigger input; also Parallel Slave Port data or ECCP1 Enhanced PWM output channel C."       },       {         "number": "5",         "name": "RD7/PSP7/P1D",         "type": "bidirectional",-        "description": "Digital I/O; Parallel Slave Port data and ECCP1 Enhanced PWM output channel D (P1D)."+        "description": "Digital I/O with Schmitt Trigger input; also Parallel Slave Port data or ECCP1 Enhanced PWM output channel D."       },       {         "number": "6",@@ -101,25 +101,25 @@         "number": "9",         "name": "RB0/INT0/FLT0/AN10",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up; external interrupt 0, ECCP1 Enhanced PWM Fault input, and analog input 10."+        "description": "Digital I/O with weak pull-up available in input mode; external interrupt 0, ECCP1 Enhanced PWM Fault input, or analog input 10."       },       {         "number": "10",         "name": "RB1/INT1/AN8",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up; external interrupt 1 and analog input 8."+        "description": "Digital I/O with weak pull-up available in input mode; external interrupt 1 or analog input 8."       },       {         "number": "11",         "name": "RB2/INT2/CANTX",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up; external interrupt 2 and CAN bus transmit output (CANTX)."+        "description": "Digital I/O with weak pull-up available in input mode; external interrupt 2 or CAN bus transmit output."       },       {         "number": "12",         "name": "RB3/CANRX",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up; CAN bus receive input, which requires TRISB<3> set to 1 when CAN is enabled."+        "description": "Digital I/O with weak pull-up available in input mode; CAN bus receive input, which must be configured as a digital input (TRISB<3> set) when CAN is enabled."       },       {         "number": "13",@@ -131,37 +131,37 @@         "number": "14",         "name": "RB4/KBI0/AN9",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up; interrupt-on-pin change KBI0 and analog input 9."+        "description": "Digital I/O with weak pull-up available in input mode; interrupt-on-pin-change input or analog input 9."       },       {         "number": "15",         "name": "RB5/KBI1/PGM",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up; interrupt-on-pin change KBI1 and low-voltage ICSP programming enable (PGM)."+        "description": "Digital I/O with weak pull-up available in input mode; interrupt-on-pin-change input or Low-Voltage ICSP programming enable pin."       },       {         "number": "16",         "name": "RB6/KBI2/PGC",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up; interrupt-on-pin change KBI2 and In-Circuit Debugger / ICSP programming clock (PGC)."+        "description": "Digital I/O with weak pull-up available in input mode; interrupt-on-pin-change input or In-Circuit Debugger and ICSP programming clock pin."       },       {         "number": "17",         "name": "RB7/KBI3/PGD",         "type": "bidirectional",-        "description": "Digital I/O with weak pull-up; interrupt-on-pin change KBI3 and In-Circuit Debugger / ICSP programming data (PGD)."+        "description": "Digital I/O with weak pull-up available in input mode; interrupt-on-pin-change input or In-Circuit Debugger and ICSP programming data pin."       },       {         "number": "18",         "name": "MCLR/VPP/RE3",         "type": "input",-        "description": "Active-low Master Clear (Reset) input, or programming voltage input (VPP) for ICSP; RE3 is a digital input when MCLR is disabled."+        "description": "Active-low Master Clear (Reset) input when MCLR is enabled; programming voltage input for ICSP; becomes digital input RE3 when MCLR is disabled."       },       {         "number": "19",         "name": "RA0/AN0/CVREF",         "type": "bidirectional",-        "description": "Digital I/O; analog input 0 and analog comparator reference output (CVREF)."+        "description": "Digital I/O; analog input 0 or analog comparator reference voltage output."       },       {         "number": "20",@@ -173,43 +173,43 @@         "number": "21",         "name": "RA2/AN2/VREF-",         "type": "bidirectional",-        "description": "Digital I/O; analog input 2 and A/D reference voltage (low) input (VREF-)."+        "description": "Digital I/O; analog input 2 or A/D reference voltage (low) input."       },       {         "number": "22",         "name": "RA3/AN3/VREF+",         "type": "bidirectional",-        "description": "Digital I/O; analog input 3 and A/D reference voltage (high) input (VREF+)."+        "description": "Digital I/O; analog input 3 or A/D reference voltage (high) input."       },       {         "number": "23",         "name": "RA4/T0CKI",         "type": "bidirectional",-        "description": "Digital I/O; Timer0 external clock input (Schmitt Trigger)."+        "description": "Digital I/O with Schmitt Trigger input; Timer0 external clock input."       },       {         "number": "24",         "name": "RA5/AN4/SS/HLVDIN",         "type": "bidirectional",-        "description": "Digital I/O; analog input 4, MSSP SPI slave select input, and High/Low-Voltage Detect external trip point input (HLVDIN)."+        "description": "Digital I/O; analog input 4, SPI slave select input, or High/Low-Voltage Detect external trip point input."       },       {         "number": "25",         "name": "RE0/RD/AN5",         "type": "bidirectional",-        "description": "Digital I/O; Parallel Slave Port read enable input (RD) and analog input 5."+        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port read enable input or analog input 5."       },       {         "number": "26",         "name": "RE1/WR/AN6/C1OUT",         "type": "bidirectional",-        "description": "Digital I/O; Parallel Slave Port write enable input (WR), analog input 6, and Comparator 1 output (C1OUT)."+        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port write enable input, analog input 6, or Comparator 1 output."       },       {         "number": "27",         "name": "RE2/CS/AN7/C2OUT",         "type": "bidirectional",-        "description": "Digital I/O; Parallel Slave Port chip select input (CS), analog input 7, and Comparator 2 output (C2OUT)."+        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port chip select input, analog input 7, or Comparator 2 output."       },       {         "number": "28",@@ -238,26 +238,26 @@       {         "number": "32",         "name": "OSC1/CLKI/RA7",-        "type": "input",-        "description": "Oscillator crystal or external clock input (CLKI) in oscillator modes; general purpose I/O RA7 when not used as oscillator input."+        "type": "bidirectional",+        "description": "Oscillator crystal or external clock input in oscillator modes; becomes general purpose I/O RA7 when not used by the oscillator."       },       {         "number": "33",         "name": "OSC2/CLKO/RA6",-        "type": "output",-        "description": "Oscillator crystal output or CLKO (FOSC/4) output in RC/EC modes; general purpose I/O RA6 when not used as oscillator output."+        "type": "bidirectional",+        "description": "Oscillator crystal output or CLKO (FOSC/4) output in RC mode; becomes general purpose I/O RA6 when not used by the oscillator."       },       {         "number": "34",         "name": "RC0/T1OSO/T13CKI",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Timer1 oscillator output (T1OSO) and Timer1/Timer3 external clock input (T13CKI)."+        "description": "Digital I/O with Schmitt Trigger input; Timer1 oscillator output or Timer1/Timer3 external clock input."       },       {         "number": "35",         "name": "RC1/T1OSI",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Timer1 oscillator input (T1OSI)."+        "description": "Digital I/O with Schmitt Trigger input; Timer1 oscillator input."       },       {         "number": "36",@@ -269,49 +269,49 @@         "number": "37",         "name": "RC3/SCK/SCL",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; MSSP SPI serial clock input/output (SCK) or I2C serial clock (SCL)."+        "description": "Digital I/O with Schmitt Trigger input; synchronous serial clock input/output for SPI mode or I2C mode."       },       {         "number": "38",         "name": "RD0/PSP0/C1IN+",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port data and Comparator 1 positive input (C1IN+)."+        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port data or Comparator 1 positive input (B)."       },       {         "number": "39",         "name": "RD1/PSP1/C1IN-",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port data and Comparator 1 negative input (C1IN-)."+        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port data or Comparator 1 negative input."       },       {         "number": "40",         "name": "RD2/PSP2/C2IN+",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port data and Comparator 2 positive input (C2IN+)."+        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port data or Comparator 2 positive input."       },       {         "number": "41",         "name": "RD3/PSP3/C2IN-",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port data and Comparator 2 negative input (C2IN-)."+        "description": "Digital I/O with Schmitt Trigger input; Parallel Slave Port data or Comparator 2 negative input."       },       {         "number": "42",         "name": "RC4/SDI/SDA",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; MSSP SPI data input (SDI) or I2C data I/O (SDA)."+        "description": "Digital I/O with Schmitt Trigger input; SPI data input or I2C data I/O."       },       {         "number": "43",         "name": "RC5/SDO",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; MSSP SPI data output (SDO)."+        "description": "Digital I/O with Schmitt Trigger input; SPI data output."       },       {         "number": "44",         "name": "RC6/TX/CK",         "type": "bidirectional",-        "description": "Digital I/O with Schmitt Trigger input; EUSART asynchronous transmit (TX) or synchronous clock (CK)."+        "description": "Digital I/O with Schmitt Trigger input; EUSART asynchronous transmit or synchronous clock."       },       {         "number": "45",@@ -331,11 +331,12 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet text gives no pin number for the QFN exposed thermal pad (EP) and does not state how i; The QFN pin numbers come from the PIC18F4682/4685 column of Table 1-3 (page 18-23), and the QFN pin ; The schema has no field for electrical specifications, so no spec values (supply range, currents, te"+          "extractor flagged: The exposed thermal pad of the QFN-44-EP(8x8) package is not given a pin number anywhere in the extr; Pins with multiple functions are typed by their primary I/O function (bidirectional). MCLR/VPP/RE3 i; Pin numbers come from the 44-pin QFN column of Table 1-3 (pages 18-23). The datasheet notes 'Pinouts",+          "exposed pad 45 added from the footprint"         ],         "pages_sent": 70,-        "cost_usd": 0.0728,-        "at": "2026-11-12T22:07:29"+        "cost_usd": 0.0582,+        "at": "2026-11-13T02:37:29"       },       "datasheet": {         "url": "https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/39761c.pdf",@@ -378,8 +379,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "51bddd8ccc7c3911119802324a6204df301a87bbb2b7b85ef761c9b55bde7b4c",-        "checked": "2026-11-12",+        "sha256": "9534b4927e055385e152d193a8949c0803aed8ba235367fee0efb7030727232e",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -397,8 +398,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "f82b8d9c065717c688d5d5118ca2244a732245a80d90eb94a53cfb00eb1c8cf9",-        "checked": "2026-11-12",+        "sha256": "3b785170e485a71a318d0bd0b878e1bafe184b89b5eaa413f0c1a88ff2120870",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -773,5 +774,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Microchip Tech Pre-ordered MCUs, QFN-44-EP(8x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
pic18f4685-i-ml.kicad_sym+2−2
@@ -148,11 +148,11 @@       (name "RC0/T1OSO/T13CKI" (effects (font (size 1.27 1.27))))       (number "34" (effects (font (size 1.27 1.27))))     )-    (pin output line (at 27.94 -5.08 180) (length 5.08)+    (pin bidirectional line (at 27.94 -5.08 180) (length 5.08)       (name "OSC2/CLKO/RA6" (effects (font (size 1.27 1.27))))       (number "33" (effects (font (size 1.27 1.27))))     )-    (pin input line (at 27.94 -7.62 180) (length 5.08)+    (pin bidirectional line (at 27.94 -7.62 180) (length 5.08)       (name "OSC1/CLKI/RA7" (effects (font (size 1.27 1.27))))       (number "32" (effects (font (size 1.27 1.27))))     )
pic18f4685-i-ml.lbr+2−2
@@ -167,8 +167,8 @@   <pin name="RC2/CCP1" x="27.94" y="2.54" length="middle" direction="io" rot="R180"/>   <pin name="RC1/T1OSI" x="27.94" y="0" length="middle" direction="io" rot="R180"/>   <pin name="RC0/T1OSO/T13CKI" x="27.94" y="-2.54" length="middle" direction="io" rot="R180"/>-  <pin name="OSC2/CLKO/RA6" x="27.94" y="-5.08" length="middle" direction="out" rot="R180"/>-  <pin name="OSC1/CLKI/RA7" x="27.94" y="-7.62" length="middle" direction="in" rot="R180"/>+  <pin name="OSC2/CLKO/RA6" x="27.94" y="-5.08" length="middle" direction="io" rot="R180"/>+  <pin name="OSC1/CLKI/RA7" x="27.94" y="-7.62" length="middle" direction="io" rot="R180"/>   <pin name="VSS@2" x="27.94" y="-10.16" length="middle" direction="pwr" rot="R180"/>   <pin name="VSS@3" x="27.94" y="-12.7" length="middle" direction="pwr" rot="R180"/>   <pin name="VDD@3" x="27.94" y="-15.24" length="middle" direction="pwr" rot="R180"/>
pic18f4685-i-ml.step+1−1
@@ -1,7 +1,7 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-11-12T22:07:35',('Author'),(+FILE_NAME('Open CASCADE Shape Model','2026-11-13T02:37:35',('Author'),(     'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'   ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));