main
Ray
pic18f4680-i-ml: renamed from pic18f4680-i, the part it was built from (PIC18F4680-I/ML); family listed
4100b44
PIC18F4680-I/ML
Microchip Tech · Pre-ordered MCUs · QFN-44-EP(8x8)
PIC18F4680-I from Microchip Tech, in a QFN-44-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC7/RX/DT | bidirectional | Digital I/O with Schmitt Trigger input, also the EUSART asynchronous receive (RX) or synchronous data (DT) pin. |
| 2 | RD4/PSP4/ECCP1/P1A | bidirectional | Digital I/O, also Parallel Slave Port data bit 4 and ECCP1 Enhanced PWM output channel A (P1A). |
| 3 | RD5/PSP5/P1B | bidirectional | Digital I/O, also Parallel Slave Port data bit 5 and ECCP1 Enhanced PWM output channel B (P1B). |
| 4 | RD6/PSP6/P1C | bidirectional | Digital I/O, also Parallel Slave Port data bit 6 and ECCP1 Enhanced PWM output channel C (P1C). |
| 5 | RD7/PSP7/P1D | bidirectional | Digital I/O, also Parallel Slave Port data bit 7 and ECCP1 Enhanced PWM output channel D (P1D). |
| 6 | VSS | power_in | Ground reference for logic and I/O pins. |
| 7 | VDD | power_in | Positive supply for logic and I/O pins. |
| 8 | VDD | power_in | Positive supply for logic and I/O pins. |
| 9 | RB0/INT0/FLT0/AN10 | bidirectional | Digital I/O with weak pull-up, external interrupt 0, ECCP1 Enhanced PWM Fault input and analog input 10. |
| 10 | RB1/INT1/AN8 | bidirectional | Digital I/O with weak pull-up, external interrupt 1 and analog input 8. |
| 11 | RB2/INT2/CANTX | bidirectional | Digital I/O with weak pull-up, external interrupt 2 and CAN bus transmit output. |
| 12 | RB3/CANRX | bidirectional | Digital I/O with weak pull-up and CAN bus receive input. |
| 13 | NC | unconnected | No connect; not connected internally. |
| 14 | RB4/KBI0/AN9 | bidirectional | Digital I/O with weak pull-up, interrupt-on-pin change KBI0 and analog input 9. |
| 15 | RB5/KBI1/PGM | bidirectional | Digital I/O with weak pull-up, interrupt-on-pin change KBI1 and Low-Voltage ICSP programming enable pin. |
| 16 | RB6/KBI2/PGC | bidirectional | Digital I/O with weak pull-up, interrupt-on-pin change KBI2 and In-Circuit Debugger and ICSP programming clock pin. |
| 17 | RB7/KBI3/PGD | bidirectional | Digital I/O with weak pull-up, interrupt-on-pin change KBI3 and In-Circuit Debugger and ICSP programming data pin. |
| 18 | MCLR/VPP/RE3 | input | Master Clear (Reset) input, an active-low Reset to the device; also programming voltage input VPP, and RE3 digital input when MCLR is disabled. |
| 19 | RA0/AN0/CVREF | bidirectional | Digital I/O, analog input 0 and analog comparator reference output (CVREF). |
| 20 | RA1/AN1 | bidirectional | Digital I/O and analog input 1. |
| 21 | RA2/AN2/VREF- | bidirectional | Digital I/O, analog input 2 and A/D reference voltage (low) input. |
| 22 | RA3/AN3/VREF+ | bidirectional | Digital I/O, analog input 3 and A/D reference voltage (high) input. |
| 23 | RA4/T0CKI | bidirectional | Digital I/O and Timer0 external clock input. |
| 24 | RA5/AN4/SS/HLVDIN | bidirectional | Digital I/O, analog input 4, SPI slave select input and High/Low-Voltage Detect input. |
| 25 | RE0/RD/AN5 | bidirectional | Digital I/O, Parallel Slave Port read control input and analog input 5. |
| 26 | RE1/WR/AN6/C1OUT | bidirectional | Digital I/O, Parallel Slave Port write control input, analog input 6 and Comparator 1 output. |
| 27 | RE2/CS/AN7/C2OUT | bidirectional | Digital I/O, Parallel Slave Port chip select input, analog input 7 and Comparator 2 output. |
| 28 | VDD | power_in | Positive supply for logic and I/O pins. |
| 29 | VDD | power_in | Positive supply for logic and I/O pins. |
| 30 | VSS | power_in | Ground reference for logic and I/O pins. |
| 31 | VSS | power_in | Ground reference for logic and I/O pins. |
| 32 | OSC1/CLKI/RA7 | bidirectional | Oscillator crystal or external clock input; RA7 digital I/O when not used as an oscillator pin. |
| 33 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output or CLKO output (FOSC/4 in RC mode); RA6 digital I/O when not used as an oscillator pin. |
| 34 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O, Timer1 oscillator output and Timer1/Timer3 external clock input. |
| 35 | RC1/T1OSI | bidirectional | Digital I/O and Timer1 oscillator input. |
| 36 | RC2/CCP1 | bidirectional | Digital I/O, CCP1 capture input, compare output or PWM output. |
| 37 | RC3/SCK/SCL | bidirectional | Digital I/O, MSSP synchronous serial clock input/output for SPI mode and I2C mode. |
| 38 | RD0/PSP0/C1IN+ | bidirectional | Digital I/O, Parallel Slave Port data bit 0 and Comparator 1 positive input. |
| 39 | RD1/PSP1/C1IN- | bidirectional | Digital I/O, Parallel Slave Port data bit 1 and Comparator 1 negative input. |
| 40 | RD2/PSP2/C2IN+ | bidirectional | Digital I/O, Parallel Slave Port data bit 2 and Comparator 2 positive input. |
| 41 | RD3/PSP3/C2IN- | bidirectional | Digital I/O, Parallel Slave Port data bit 3 and Comparator 2 negative input. |
| 42 | RC4/SDI/SDA | bidirectional | Digital I/O, MSSP SPI data input and I2C data I/O. |
| 43 | RC5/SDO | bidirectional | Digital I/O and MSSP SPI data output. |
| 44 | RC6/TX/CK | bidirectional | Digital I/O, EUSART asynchronous transmit and EUSART synchronous clock. |
| 45 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-44-EP(8x8) |
| Category | Embedded Processors & Controllers |
| Pins | 45 |
CAD (KiCad official)
- Symbol:
PIC18F4680-I - Footprint:
Package_DFN_QFN:QFN-44-1EP_8x8mm_P0.65mm_EP6.45x6.45mm - 3D model: QFN-44-EP(8x8) (KiCad packages3D, STEP)
- 3D model files:
pic18f4680-i-etched.step/pic18f4680-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f4680-i.step/pic18f4680-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (453 pp, sha256
74abd6f935fb9ac4, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC18F4680-I/ML. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC18F4680-I/PT
# PIC18F4680-I/ML
**Microchip Tech** · Pre-ordered MCUs · QFN-44-EP(8x8)
PIC18F4680-I from Microchip Tech, in a QFN-44-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC7/RX/DT | bidirectional | Digital I/O with Schmitt Trigger input, also the EUSART asynchronous receive (RX) or synchronous data (DT) pin. |
| 2 | RD4/PSP4/ECCP1/P1A | bidirectional | Digital I/O, also Parallel Slave Port data bit 4 and ECCP1 Enhanced PWM output channel A (P1A). |
| 3 | RD5/PSP5/P1B | bidirectional | Digital I/O, also Parallel Slave Port data bit 5 and ECCP1 Enhanced PWM output channel B (P1B). |
| 4 | RD6/PSP6/P1C | bidirectional | Digital I/O, also Parallel Slave Port data bit 6 and ECCP1 Enhanced PWM output channel C (P1C). |
| 5 | RD7/PSP7/P1D | bidirectional | Digital I/O, also Parallel Slave Port data bit 7 and ECCP1 Enhanced PWM output channel D (P1D). |
| 6 | VSS | power_in | Ground reference for logic and I/O pins. |
| 7 | VDD | power_in | Positive supply for logic and I/O pins. |
| 8 | VDD | power_in | Positive supply for logic and I/O pins. |
| 9 | RB0/INT0/FLT0/AN10 | bidirectional | Digital I/O with weak pull-up, external interrupt 0, ECCP1 Enhanced PWM Fault input and analog input 10. |
| 10 | RB1/INT1/AN8 | bidirectional | Digital I/O with weak pull-up, external interrupt 1 and analog input 8. |
| 11 | RB2/INT2/CANTX | bidirectional | Digital I/O with weak pull-up, external interrupt 2 and CAN bus transmit output. |
| 12 | RB3/CANRX | bidirectional | Digital I/O with weak pull-up and CAN bus receive input. |
| 13 | NC | unconnected | No connect; not connected internally. |
| 14 | RB4/KBI0/AN9 | bidirectional | Digital I/O with weak pull-up, interrupt-on-pin change KBI0 and analog input 9. |
| 15 | RB5/KBI1/PGM | bidirectional | Digital I/O with weak pull-up, interrupt-on-pin change KBI1 and Low-Voltage ICSP programming enable pin. |
| 16 | RB6/KBI2/PGC | bidirectional | Digital I/O with weak pull-up, interrupt-on-pin change KBI2 and In-Circuit Debugger and ICSP programming clock pin. |
| 17 | RB7/KBI3/PGD | bidirectional | Digital I/O with weak pull-up, interrupt-on-pin change KBI3 and In-Circuit Debugger and ICSP programming data pin. |
| 18 | MCLR/VPP/RE3 | input | Master Clear (Reset) input, an active-low Reset to the device; also programming voltage input VPP, and RE3 digital input when MCLR is disabled. |
| 19 | RA0/AN0/CVREF | bidirectional | Digital I/O, analog input 0 and analog comparator reference output (CVREF). |
| 20 | RA1/AN1 | bidirectional | Digital I/O and analog input 1. |
| 21 | RA2/AN2/VREF- | bidirectional | Digital I/O, analog input 2 and A/D reference voltage (low) input. |
| 22 | RA3/AN3/VREF+ | bidirectional | Digital I/O, analog input 3 and A/D reference voltage (high) input. |
| 23 | RA4/T0CKI | bidirectional | Digital I/O and Timer0 external clock input. |
| 24 | RA5/AN4/SS/HLVDIN | bidirectional | Digital I/O, analog input 4, SPI slave select input and High/Low-Voltage Detect input. |
| 25 | RE0/RD/AN5 | bidirectional | Digital I/O, Parallel Slave Port read control input and analog input 5. |
| 26 | RE1/WR/AN6/C1OUT | bidirectional | Digital I/O, Parallel Slave Port write control input, analog input 6 and Comparator 1 output. |
| 27 | RE2/CS/AN7/C2OUT | bidirectional | Digital I/O, Parallel Slave Port chip select input, analog input 7 and Comparator 2 output. |
| 28 | VDD | power_in | Positive supply for logic and I/O pins. |
| 29 | VDD | power_in | Positive supply for logic and I/O pins. |
| 30 | VSS | power_in | Ground reference for logic and I/O pins. |
| 31 | VSS | power_in | Ground reference for logic and I/O pins. |
| 32 | OSC1/CLKI/RA7 | bidirectional | Oscillator crystal or external clock input; RA7 digital I/O when not used as an oscillator pin. |
| 33 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output or CLKO output (FOSC/4 in RC mode); RA6 digital I/O when not used as an oscillator pin. |
| 34 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O, Timer1 oscillator output and Timer1/Timer3 external clock input. |
| 35 | RC1/T1OSI | bidirectional | Digital I/O and Timer1 oscillator input. |
| 36 | RC2/CCP1 | bidirectional | Digital I/O, CCP1 capture input, compare output or PWM output. |
| 37 | RC3/SCK/SCL | bidirectional | Digital I/O, MSSP synchronous serial clock input/output for SPI mode and I2C mode. |
| 38 | RD0/PSP0/C1IN+ | bidirectional | Digital I/O, Parallel Slave Port data bit 0 and Comparator 1 positive input. |
| 39 | RD1/PSP1/C1IN- | bidirectional | Digital I/O, Parallel Slave Port data bit 1 and Comparator 1 negative input. |
| 40 | RD2/PSP2/C2IN+ | bidirectional | Digital I/O, Parallel Slave Port data bit 2 and Comparator 2 positive input. |
| 41 | RD3/PSP3/C2IN- | bidirectional | Digital I/O, Parallel Slave Port data bit 3 and Comparator 2 negative input. |
| 42 | RC4/SDI/SDA | bidirectional | Digital I/O, MSSP SPI data input and I2C data I/O. |
| 43 | RC5/SDO | bidirectional | Digital I/O and MSSP SPI data output. |
| 44 | RC6/TX/CK | bidirectional | Digital I/O, EUSART asynchronous transmit and EUSART synchronous clock. |
| 45 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-44-EP(8x8) |
| Category | Embedded Processors & Controllers |
| Pins | 45 |
## CAD (KiCad official)
- Symbol: `PIC18F4680-I`
- Footprint: `Package_DFN_QFN:QFN-44-1EP_8x8mm_P0.65mm_EP6.45x6.45mm`
- 3D model: QFN-44-EP(8x8) (KiCad packages3D, STEP)
- 3D model files: `pic18f4680-i-etched.step` / `pic18f4680-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic18f4680-i.step` / `pic18f4680-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic18f4680-i-datasheet.pdf) (453 pp, sha256 `74abd6f935fb9ac4`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic18f4680-i-datasheet.pdf)
## Other parts in this family
This page is **PIC18F4680-I/ML**. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC18F4680-I/PT