main
Ray
Publish 0.1.0
27deba1
PIC18F4321-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-44(10x10)
PIC18F4321-I from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC7 | bidirectional | PORTC I/O pin RC7; no programming function is given for it. |
| 2 | RD4 | bidirectional | PORTD I/O pin RD4; no programming function is given for it. |
| 3 | RD5 | bidirectional | PORTD I/O pin RD5; no programming function is given for it. |
| 4 | RD6 | bidirectional | PORTD I/O pin RD6; no programming function is given for it. |
| 5 | RD7 | bidirectional | PORTD I/O pin RD7; no programming function is given for it. |
| 6 | VSS | power_in | Ground; all VSS pins must be connected. |
| 7 | VDD | power_in | Power supply, 2.00 V to 5.50 V during programming (3.0 V to 5.50 V for Bulk Erase); all VDD pins must be connected. |
| 8 | RB0 | bidirectional | PORTB I/O pin RB0; no programming function is given for it. |
| 9 | RB1 | bidirectional | PORTB I/O pin RB1; no programming function is given for it. |
| 10 | RB2 | bidirectional | PORTB I/O pin RB2; no programming function is given for it. |
| 11 | RB3 | bidirectional | PORTB I/O pin RB3; no programming function is given for it. |
| 12 | NC/ICPGC | unconnected | No connect on the PIC18F4321; the ICPGC dedicated-port function applies only to the PIC18F4450/4455/4458/4553. |
| 13 | NC/ICPGD | unconnected | No connect on the PIC18F4321; the ICPGD dedicated-port function applies only to the PIC18F4450/4455/4458/4553. |
| 14 | RB4 | bidirectional | PORTB I/O pin RB4; no programming function is given for it. |
| 15 | RB5/PGM | bidirectional | PGM is the low-voltage ICSP input when the LVP configuration bit equals 1; the pin ceases to be a general-purpose I/O in that mode. |
| 16 | RB6/PGC | input | PGC is the serial clock input for ICSP programming; commands and data are latched on its falling edge. |
| 17 | RB7/PGD | bidirectional | PGD is the serial data pin for ICSP, carrying command bits and data in and out, LSb first. |
| 18 | MCLR/VPP/RE3 | input | Programming enable pin (VPP); raised to VIHH (VDD + 4.0 V min, 12.5 V max) to enter high-voltage ICSP mode, or to VIH (2.00 V to 5.50 V) in low-voltage ICSP mode. |
| 19 | RA0 | bidirectional | PORTA I/O pin RA0; no programming function is given for it. |
| 20 | RA1 | bidirectional | PORTA I/O pin RA1; no programming function is given for it. |
| 21 | RA2 | bidirectional | PORTA I/O pin RA2; no programming function is given for it. |
| 22 | RA3 | bidirectional | PORTA I/O pin RA3; no programming function is given for it. |
| 23 | RA4 | bidirectional | PORTA I/O pin RA4; no programming function is given for it. |
| 24 | RA5 | bidirectional | PORTA I/O pin RA5; no programming function is given for it. |
| 25 | RE0 | bidirectional | PORTE I/O pin RE0; no programming function is given for it. |
| 26 | RE1 | bidirectional | PORTE I/O pin RE1; no programming function is given for it. |
| 27 | RE2 | bidirectional | PORTE I/O pin RE2; no programming function is given for it. |
| 28 | VDD | power_in | Power supply, 2.00 V to 5.50 V during programming (3.0 V to 5.50 V for Bulk Erase); all VDD pins must be connected. |
| 29 | VSS | power_in | Ground; all VSS pins must be connected. |
| 30 | OSC1 | input | Oscillator pin OSC1; no programming function is given for it. |
| 31 | OSC2 | output | Oscillator pin OSC2; no programming function is given for it. |
| 32 | RC0 | bidirectional | PORTC I/O pin RC0; no programming function is given for it. |
| 33 | NC/ICVPP | unconnected | No connect on the PIC18F4321; the ICVPP dedicated-port function applies only to the PIC18F4450/4455/4458/4553. |
| 34 | NC/ICPORTS | unconnected | No connect on the PIC18F4321; the ICPORTS function applies only to the PIC18F4450/4455/4458/4553. |
| 35 | RC1 | bidirectional | PORTC I/O pin RC1; no programming function is given for it. |
| 36 | RC2 | bidirectional | PORTC I/O pin RC2; no programming function is given for it. |
| 37 | RC3 | bidirectional | PORTC I/O pin RC3; no programming function is given for it. |
| 38 | RD0 | bidirectional | PORTD I/O pin RD0; no programming function is given for it. |
| 39 | RD1 | bidirectional | PORTD I/O pin RD1; no programming function is given for it. |
| 40 | RD2 | bidirectional | PORTD I/O pin RD2; no programming function is given for it. |
| 41 | RD3 | bidirectional | PORTD I/O pin RD3; no programming function is given for it. |
| 42 | RC4 | bidirectional | PORTC I/O pin RC4; no programming function is given for it. |
| 43 | RC5 | bidirectional | PORTC I/O pin RC5; no programming function is given for it. |
| 44 | RC6 | bidirectional | PORTC I/O pin RC6; no programming function is given for it. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-44(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Low-Voltage Programming Voltage on MCLR/VPP/RE3 | VIHL | 2 | 5.5 | V | Note 2 | 53 | |
| High-Voltage Programming Voltage on MCLR/VPP/RE3 (max; min is VDD + 4.0) | VIHH | 12.5 | V | Note 2 | 53 | ||
| Supply Voltage During Programming, externally timed | VDD | 2 | 5.5 | V | Externally timed, Row Erases and all writes | 53 | |
| Supply Voltage During Programming, self-timed bulk erase | VDD | 3 | 5.5 | V | Self-timed, Bulk Erases only (Note 3); at 0°C-50°C | 53 | |
| Programming Current on MCLR/VPP/RE3 | IPP | 300 | µA | Note 2 | 53 | ||
| Supply Current During Programming | IDDP | 10 | mA | 53 | |||
| Output Low Voltage | VOL | 0.6 | V | IOL = 8.5 mA @ 4.5V | 53 | ||
| Capacitive Loading on I/O pin (PGD) | CIO | 50 | pF | To meet AC specifications | 53 | ||
| MCLR/VPP/RE3 Rise Time to Enter Program/Verify mode | TR | 1 | µs | Notes 1, 2 | 53 | ||
| Serial Clock (PGC) Period | TPGC | 100 | ns | VDD = 5.0V | 53 | ||
| Serial Clock (PGC) Period | TPGC | 1 | µs | VDD = 2.0V | 53 | ||
| Serial Clock (PGC) Low Time | TPGCL | 40 | ns | VDD = 5.0V | 53 | ||
| Serial Clock (PGC) Low Time | TPGCL | 400 | ns | VDD = 2.0V | 53 | ||
| Serial Clock (PGC) High Time | TPGCH | 40 | ns | VDD = 5.0V | 53 | ||
| Serial Clock (PGC) High Time | TPGCH | 400 | ns | VDD = 2.0V | 53 | ||
| Input Data Setup Time to Serial Clock | TSET1 | 15 | ns | 53 | |||
| Input Data Hold Time from PGC | THLD1 | 15 | ns | 53 | |||
| Delay Between 4-Bit Command and Command Operand | TDLY1 | 40 | ns | 53 | |||
| Delay Between 4-Bit Command Operand and Next 4-Bit Command | TDLY1A | 40 | ns | 53 | |||
| Delay Between Last PGC of Command Byte to First PGC of Read of Data Word | TDLY2 | 20 | ns | 53 | |||
| PGC High Time (minimum programming time) | TDLY5 | 1 | ms | Externally timed | 53 | ||
| PGC Low Time After Programming (high-voltage discharge time) | TDLY6 | 100 | µs | 53 | |||
| Delay to Allow Self-Timed Data Write or Bulk Erase to Occur | TDLY7 | 5 | ms | 53 | |||
| Data Write Polling Time | TDRWT | 4 | ms | 54 | |||
| Input Data Hold Time from MCLR/VPP/RE3 | THLD2 | 2 | µs | 54 | |||
| VDD Setup Time to MCLR/VPP/RE3 | TSET2 | 100 | ns | Note 2 | 54 | ||
| Data Out Valid from PGC | TVALID | 10 | ns | 54 | |||
| PGM Setup Time to MCLR/VPP/RE3 | TSET3 | 2 | µs | Note 2 | 54 | ||
| Delay Between Last PGC and MCLR/VPP/RE3 | TDLY8 | 0 | µs | 54 | |||
| MCLR/VPP/RE3 to VDD | THLD3 | 100 | ns | 54 | |||
| MCLR/VPP/RE3 to PGM | THLD4 | 0 | µs | 54 |
CAD (KiCad official)
- Symbol:
PIC18F4321-I - Footprint:
Package_QFP:TQFP-44_10x10mm_P0.8mm - 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic18f4321-i-etched.step/pic18f4321-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f4321-i.step/pic18f4321-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (56 pp, sha256
ed6e6cfccd29be7f, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC18F4321-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-44(10x10)
PIC18F4321-I from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RC7 | bidirectional | PORTC I/O pin RC7; no programming function is given for it. |
| 2 | RD4 | bidirectional | PORTD I/O pin RD4; no programming function is given for it. |
| 3 | RD5 | bidirectional | PORTD I/O pin RD5; no programming function is given for it. |
| 4 | RD6 | bidirectional | PORTD I/O pin RD6; no programming function is given for it. |
| 5 | RD7 | bidirectional | PORTD I/O pin RD7; no programming function is given for it. |
| 6 | VSS | power_in | Ground; all VSS pins must be connected. |
| 7 | VDD | power_in | Power supply, 2.00 V to 5.50 V during programming (3.0 V to 5.50 V for Bulk Erase); all VDD pins must be connected. |
| 8 | RB0 | bidirectional | PORTB I/O pin RB0; no programming function is given for it. |
| 9 | RB1 | bidirectional | PORTB I/O pin RB1; no programming function is given for it. |
| 10 | RB2 | bidirectional | PORTB I/O pin RB2; no programming function is given for it. |
| 11 | RB3 | bidirectional | PORTB I/O pin RB3; no programming function is given for it. |
| 12 | NC/ICPGC | unconnected | No connect on the PIC18F4321; the ICPGC dedicated-port function applies only to the PIC18F4450/4455/4458/4553. |
| 13 | NC/ICPGD | unconnected | No connect on the PIC18F4321; the ICPGD dedicated-port function applies only to the PIC18F4450/4455/4458/4553. |
| 14 | RB4 | bidirectional | PORTB I/O pin RB4; no programming function is given for it. |
| 15 | RB5/PGM | bidirectional | PGM is the low-voltage ICSP input when the LVP configuration bit equals 1; the pin ceases to be a general-purpose I/O in that mode. |
| 16 | RB6/PGC | input | PGC is the serial clock input for ICSP programming; commands and data are latched on its falling edge. |
| 17 | RB7/PGD | bidirectional | PGD is the serial data pin for ICSP, carrying command bits and data in and out, LSb first. |
| 18 | MCLR/VPP/RE3 | input | Programming enable pin (VPP); raised to VIHH (VDD + 4.0 V min, 12.5 V max) to enter high-voltage ICSP mode, or to VIH (2.00 V to 5.50 V) in low-voltage ICSP mode. |
| 19 | RA0 | bidirectional | PORTA I/O pin RA0; no programming function is given for it. |
| 20 | RA1 | bidirectional | PORTA I/O pin RA1; no programming function is given for it. |
| 21 | RA2 | bidirectional | PORTA I/O pin RA2; no programming function is given for it. |
| 22 | RA3 | bidirectional | PORTA I/O pin RA3; no programming function is given for it. |
| 23 | RA4 | bidirectional | PORTA I/O pin RA4; no programming function is given for it. |
| 24 | RA5 | bidirectional | PORTA I/O pin RA5; no programming function is given for it. |
| 25 | RE0 | bidirectional | PORTE I/O pin RE0; no programming function is given for it. |
| 26 | RE1 | bidirectional | PORTE I/O pin RE1; no programming function is given for it. |
| 27 | RE2 | bidirectional | PORTE I/O pin RE2; no programming function is given for it. |
| 28 | VDD | power_in | Power supply, 2.00 V to 5.50 V during programming (3.0 V to 5.50 V for Bulk Erase); all VDD pins must be connected. |
| 29 | VSS | power_in | Ground; all VSS pins must be connected. |
| 30 | OSC1 | input | Oscillator pin OSC1; no programming function is given for it. |
| 31 | OSC2 | output | Oscillator pin OSC2; no programming function is given for it. |
| 32 | RC0 | bidirectional | PORTC I/O pin RC0; no programming function is given for it. |
| 33 | NC/ICVPP | unconnected | No connect on the PIC18F4321; the ICVPP dedicated-port function applies only to the PIC18F4450/4455/4458/4553. |
| 34 | NC/ICPORTS | unconnected | No connect on the PIC18F4321; the ICPORTS function applies only to the PIC18F4450/4455/4458/4553. |
| 35 | RC1 | bidirectional | PORTC I/O pin RC1; no programming function is given for it. |
| 36 | RC2 | bidirectional | PORTC I/O pin RC2; no programming function is given for it. |
| 37 | RC3 | bidirectional | PORTC I/O pin RC3; no programming function is given for it. |
| 38 | RD0 | bidirectional | PORTD I/O pin RD0; no programming function is given for it. |
| 39 | RD1 | bidirectional | PORTD I/O pin RD1; no programming function is given for it. |
| 40 | RD2 | bidirectional | PORTD I/O pin RD2; no programming function is given for it. |
| 41 | RD3 | bidirectional | PORTD I/O pin RD3; no programming function is given for it. |
| 42 | RC4 | bidirectional | PORTC I/O pin RC4; no programming function is given for it. |
| 43 | RC5 | bidirectional | PORTC I/O pin RC5; no programming function is given for it. |
| 44 | RC6 | bidirectional | PORTC I/O pin RC6; no programming function is given for it. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-44(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 44 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Low-Voltage Programming Voltage on MCLR/VPP/RE3 | VIHL | 2 | | 5.5 | V | Note 2 | 53 |
| High-Voltage Programming Voltage on MCLR/VPP/RE3 (max; min is VDD + 4.0) | VIHH | | | 12.5 | V | Note 2 | 53 |
| Supply Voltage During Programming, externally timed | VDD | 2 | | 5.5 | V | Externally timed, Row Erases and all writes | 53 |
| Supply Voltage During Programming, self-timed bulk erase | VDD | 3 | | 5.5 | V | Self-timed, Bulk Erases only (Note 3); at 0°C-50°C | 53 |
| Programming Current on MCLR/VPP/RE3 | IPP | | | 300 | µA | Note 2 | 53 |
| Supply Current During Programming | IDDP | | | 10 | mA | | 53 |
| Output Low Voltage | VOL | | | 0.6 | V | IOL = 8.5 mA @ 4.5V | 53 |
| Capacitive Loading on I/O pin (PGD) | CIO | | | 50 | pF | To meet AC specifications | 53 |
| MCLR/VPP/RE3 Rise Time to Enter Program/Verify mode | TR | | | 1 | µs | Notes 1, 2 | 53 |
| Serial Clock (PGC) Period | TPGC | 100 | | | ns | VDD = 5.0V | 53 |
| Serial Clock (PGC) Period | TPGC | 1 | | | µs | VDD = 2.0V | 53 |
| Serial Clock (PGC) Low Time | TPGCL | 40 | | | ns | VDD = 5.0V | 53 |
| Serial Clock (PGC) Low Time | TPGCL | 400 | | | ns | VDD = 2.0V | 53 |
| Serial Clock (PGC) High Time | TPGCH | 40 | | | ns | VDD = 5.0V | 53 |
| Serial Clock (PGC) High Time | TPGCH | 400 | | | ns | VDD = 2.0V | 53 |
| Input Data Setup Time to Serial Clock | TSET1 | 15 | | | ns | | 53 |
| Input Data Hold Time from PGC | THLD1 | 15 | | | ns | | 53 |
| Delay Between 4-Bit Command and Command Operand | TDLY1 | 40 | | | ns | | 53 |
| Delay Between 4-Bit Command Operand and Next 4-Bit Command | TDLY1A | 40 | | | ns | | 53 |
| Delay Between Last PGC of Command Byte to First PGC of Read of Data Word | TDLY2 | 20 | | | ns | | 53 |
| PGC High Time (minimum programming time) | TDLY5 | 1 | | | ms | Externally timed | 53 |
| PGC Low Time After Programming (high-voltage discharge time) | TDLY6 | 100 | | | µs | | 53 |
| Delay to Allow Self-Timed Data Write or Bulk Erase to Occur | TDLY7 | 5 | | | ms | | 53 |
| Data Write Polling Time | TDRWT | 4 | | | ms | | 54 |
| Input Data Hold Time from MCLR/VPP/RE3 | THLD2 | 2 | | | µs | | 54 |
| VDD Setup Time to MCLR/VPP/RE3 | TSET2 | 100 | | | ns | Note 2 | 54 |
| Data Out Valid from PGC | TVALID | 10 | | | ns | | 54 |
| PGM Setup Time to MCLR/VPP/RE3 | TSET3 | 2 | | | µs | Note 2 | 54 |
| Delay Between Last PGC and MCLR/VPP/RE3 | TDLY8 | 0 | | | µs | | 54 |
| MCLR/VPP/RE3 to VDD | THLD3 | | | 100 | ns | | 54 |
| MCLR/VPP/RE3 to PGM | THLD4 | 0 | | | µs | | 54 |
## CAD (KiCad official)
- Symbol: `PIC18F4321-I`
- Footprint: `Package_QFP:TQFP-44_10x10mm_P0.8mm`
- 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files: `pic18f4321-i-etched.step` / `pic18f4321-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic18f4321-i.step` / `pic18f4321-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/30009622M.pdf) (56 pp, sha256 `ed6e6cfccd29be7f`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic18f4321-i-datasheet.pdf)