Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18F27K40T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil

PIC18F27K40T-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE3/MCLR/VPP input Input-only pin RE3 that serves as the MCLR/VPP function (device Reset when MCLR is enabled) and as an interrupt-on-change input (IOCE3).
2 RA0 bidirectional PORTA bit 0 with analog input ANA0, comparator inputs C1IN0-/C2IN0-, and interrupt-on-change IOCA0, with a weak pull-up available.
3 RA1 bidirectional PORTA bit 1 with analog input ANA1, comparator inputs C1IN1-/C2IN1-, and interrupt-on-change IOCA1, with a weak pull-up available.
4 RA2 bidirectional PORTA bit 2 with analog input ANA2, DAC1OUT1, Vref- (DAC and ADC), comparator inputs C1IN0+/C2IN0+, and interrupt-on-change IOCA2.
5 RA3 bidirectional PORTA bit 3 with analog input ANA3, Vref+ (DAC and ADC), comparator input C1IN1+, DSM carrier-low output MDCARL, and interrupt-on-change IOCA3.
6 RA4 bidirectional PORTA bit 4 with analog input ANA4, Timer0 clock input T0CKI, DSM carrier-high output MDCARH, and interrupt-on-change IOCA4.
7 RA5 bidirectional PORTA bit 5 with analog input ANA5, DSM source input MDSRC, MSSP slave select SS1, and interrupt-on-change IOCA5.
8 VSS power_in Ground reference pin for the device.
9 RA7/CLKIN/OSC1 bidirectional PORTA bit 7 with analog input ANA7, interrupt-on-change IOCA7, and the OSC1/CLKIN oscillator input in the oscillator modes that use it.
10 RA6/CLKOUT/OSC2 bidirectional PORTA bit 6 with analog input ANA6, interrupt-on-change IOCA6, and the OSC2/CLKOUT pin, which carries the clock output when enabled by CLKOUTEN.
11 RC0/SOSCO bidirectional PORTC bit 0 with analog input ANC0, Timer1/Timer3 clock and gate inputs (T1CKI, T3CKI, T3G), interrupt-on-change IOCC0, and the secondary oscillator output SOSCO.
12 RC1/SOSCI bidirectional PORTC bit 1 with analog input ANC1, CCP2 output, interrupt-on-change IOCC1, and the secondary oscillator input SOSCI/SOSCIN.
13 RC2 bidirectional PORTC bit 2 with analog input ANC2, Timer5 clock input T5CKI, CCP1 input/output, and interrupt-on-change IOCC2.
14 RC3 bidirectional PORTC bit 3 with analog input ANC3, Timer2 input T2IN, interrupt-on-change IOCC3, and MSSP1 SCK1/SCL1 which uses I2C logic levels when assigned to this pin.
15 RC4 bidirectional PORTC bit 4 with analog input ANC4, interrupt-on-change IOCC4, and MSSP1 SDI1/SDA1 which uses I2C logic levels when assigned to this pin.
16 RC5 bidirectional PORTC bit 5 with analog input ANC5, Timer4 input T4IN, and interrupt-on-change IOCC5.
17 RC6 bidirectional PORTC bit 6 with analog input ANC6, interrupt-on-change IOCC6, and the EUSART1 clock CK1 (TX1/CK1 output).
18 RC7 bidirectional PORTC bit 7 with analog input ANC7, interrupt-on-change IOCC7, and the EUSART1 receive/data input RX1/DT1.
19 VSS power_in Ground reference pin for the device.
20 VDD power_in Positive supply pin for the device; the supply voltage limits are not stated in the extracted text.
21 RB0 bidirectional PORTB bit 0 with analog input ANB0, comparator input C2IN1+, CWG1 input, ZCD input ZCDIN, interrupt-on-change IOCB0, and external interrupt INT0.
22 RB1 bidirectional PORTB bit 1 with analog input ANB1, comparator inputs C1IN3-/C2IN3-, interrupt-on-change IOCB1, and external interrupt INT1.
23 RB2 bidirectional PORTB bit 2 with analog input ANB2, interrupt-on-change IOCB2, and external interrupt INT2.
24 RB3 bidirectional PORTB bit 3 with analog input ANB3, comparator inputs C1IN2-/C2IN2-, and interrupt-on-change IOCB3.
25 RB4 bidirectional PORTB bit 4 with analog input ANB4, Timer5 gate input T5G, and interrupt-on-change IOCB4.
26 RB5 bidirectional PORTB bit 5 with analog input ANB5, Timer1 gate input T1G, and interrupt-on-change IOCB5.
27 RB6/ICSPCLK bidirectional PORTB bit 6 with analog input ANB6, interrupt-on-change IOCB6, and the ICSPCLK In-Circuit Serial Programming clock pin.
28 RB7/ICSPDAT bidirectional PORTB bit 7 with analog input ANB7, DAC1OUT2 output, Timer6 input T6IN, interrupt-on-change IOCB7, and the ICSPDAT In-Circuit Serial Programming data pin.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28-208mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD (FOSC ≤ 16 MHz) VDD 2.3 5.5 V FOSC ≤ 16 MHz 647
Supply voltage VDD (FOSC > 16 MHz) VDD 2.5 5.5 V FOSC > 16 MHz 647
Supply voltage VDD (FOSC > 32 MHz) VDD 3 5.5 V FOSC > 32 MHz 647
RAM data retention voltage VDR VDR 1.7 V Device in Sleep mode 647
VDD rise rate to ensure internal POR signal SVDD 0.05 V/ms BOR or LPBOR disabled 648
Operating ambient temperature range (Industrial) TA -40 85 °C Industrial temperature range 646
Ambient temperature under bias TA -40 125 °C 645
Storage temperature -65 150 °C 645
Voltage on VDD pin with respect to VSS (PIC18F) VDD -0.3 6.5 V PIC18F24/25K40 645
Voltage on MCLR pin with respect to VSS -0.3 9 V 645
Voltage on all other pins with respect to VSS -0.3 V Upper limit printed as VDD + 0.3V 645
Maximum current on VSS pin 350 mA -40°C ≤ TA ≤ +85°C 645
Maximum current on VDD pin (28-pin device) VDD 250 mA -40°C ≤ TA ≤ +85°C 645
Maximum current on any standard I/O pin -50 50 mA 645
Clamp current IK IK -20 20 mA VPIN < 0 or VPIN > VDD 645
Total power dissipation 800 mW 645
Supply current IDD, XT = 4 MHz IDDXT4 550 750 μA XT = 4 MHz, 3.0V 649
Supply current IDD, HFINTOSC = 16 MHz IDDHFO16 2 2.7 mA HFINTOSC = 16 MHz, 3.0V 649
Supply current IDD, HFINTOSC = 64 MHz with PLL IDDHFOPLL 7.5 9.5 mA HFINTOSC = 64 MHz, 3.0V 649
Supply current IDD, HS+PLL = 64 MHz IDDHSPLL64 7 9 mA HS+PLL = 64 MHz, 3.0V 649
Power-down current IPD base IPD 0.4 4 μA 3.0V; Max column at +85°C 651
Power-down current IPD, Low-Frequency INTOSC/WDT IPD_WDT 0.6 5 μA 3.0V; Max column at +85°C 651
Power-down current IPD, Secondary Oscillator (SOSC) IPD_SOSC 0.8 8.5 μA 3.0V; Max column at +85°C 651
Power-down current IPD, Low-Power BOR (LPBOR) IPD_LPBOR 0.7 5 μA 3.0V; Max column at +85°C 651
Power-down current IPD, FVR IPD_FVR 32 53 μA 3.0V; FVRCON = 0x81 or 0x84; Max at +85°C 651
Power-down current IPD, Brown-out Reset (BOR) IPD_BOR 14 19 μA 3.0V; Max column at +85°C 651
Power-down current IPD, Comparator IPD_CMP 31 47 μA 3.0V; Max column at +85°C 651
Input low voltage, I/O with TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 652
Input low voltage, I/O port (standard) VIL 0.15 ×VDD 1.8V ≤ VDD ≤ 4.5V 652
Input low voltage, I/O with Schmitt Trigger buffer VIL 0.2 ×VDD 2.0V ≤ VDD ≤ 5.5V 652
Input low voltage, I/O with I2C levels VIL 0.3 ×VDD 2.0V ≤ VDD ≤ 5.5V 652
Input low voltage, I/O with SMBus levels VIL 0.8 V 2.7V ≤ VDD ≤ 5.5V 652
Input low voltage, MCLR VIL 0.2 ×VDD 652
Input high voltage, I/O with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 652
Input high voltage, I/O with Schmitt Trigger buffer VIH 0.8 ×VDD 2.0V ≤ VDD ≤ 5.5V 652
Input high voltage, I/O with I2C levels VIH 0.7 ×VDD 652
Input high voltage, I/O with SMBus levels VIH 2.1 V 2.7V ≤ VDD ≤ 5.5V 652
Input high voltage, MCLR VIH 0.7 ×VDD 652
Input leakage current, I/O ports (85°C) IIL -125 5 125 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C 652
Weak pull-up current IPUR 25 120 200 μA VDD=3.0V, VPIN=VSS 652
Output low voltage, I/O ports VOL 0.6 V IOL=10.0 mA, VDD=3.0V 652
I/O pin capacitance CIO 5 50 pF 652
FVR 1x gain (1.024V) output accuracy VFVR1 -4 4 % VDD ≥ 2.5V, -40°C to 85°C 663
FVR 2x gain (2.048V) output accuracy VFVR2 -4 4 % VDD ≥ 2.5V, -40°C to 85°C 663
FVR 4x gain (4.096V) output accuracy VFVR4 -5 5 % VDD ≥ 4.75V, -40°C to 85°C 663
Comparator input offset voltage VIOFF -60 60 mV VDD=3.0V, TA=25°C; VICM=VDD/2 662
Comparator hysteresis VHYST 10 25 40 mV VDD=3.0V, TA=25°C 663
Comparator response time, rising edge TRESP 300 600 ns VDD=3.0V, TA=25°C 663
ADC integral error EIL -1 0.1 1 LSb VDD=3.0V, TA=25°C, TAD=1µs; ADCREF+=3.0V, ADCREF-=0V 661
ADC differential error EDL -1 0.1 1 LSb VDD=3.0V, TA=25°C, TAD=1µs; ADCREF+=3.0V, ADCREF-=0V 661
ADC offset error EOFF -2.5 0.5 2.5 LSb VDD=3.0V, TA=25°C, TAD=1µs; ADCREF+=3.0V, ADCREF-=0V 661
ADC reference voltage (ADREF+ - ADREF-) VADREF 1.8 V Upper limit printed as VDD 661
ADC clock period TAD (FOSC-based) TAD 1 9 μs Using FOSC as ADC clock source, ADOCS = 0 661
DAC absolute accuracy VACC -5 5 LSb VDD=3.0V, TA=25°C 663
DAC settling time TST 10 μs DACR<4:0> transitions from 00000 to 01111 663
Zero-cross pin maximum source or sink current IZCD_MAX 600 μA VDD=3.0V, TA=25°C 663
Thermal resistance junction to ambient (SSOP) θJA 90 °C/W 28-pin SSOP package 653
Thermal resistance junction to case (SSOP) θJC 24 °C/W 28-pin SSOP package 654
Maximum junction temperature TJMAX 150 °C 654

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PPS body RxyPPS 276

CAD (KiCad official)

  • Symbol: PIC18F27K40T-I
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pic18f27k40t-i-ss-etched.step / pic18f27k40t-i-ss-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f27k40t-i-ss.step / pic18f27k40t-i-ss.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (720 pp, sha256 043510e914313694, retrieved 2026-11-18)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF