main
Ray
pic18f27j53-i-so: renamed from pic18f27j53-i, the part it was built from (PIC18F27J53-I/SO); family listed
85d10ff
PIC18F27J53-I/SO
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC18F27J53-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Master Clear (Reset) input; active-low Reset to the device, with ST input buffer and 5.5V tolerance. |
| 2 | RA0/AN0/C1INA/ULPWU/RP0 | bidirectional | Digital I/O (TTL/DIG) that also serves as analog input AN0, Comparator 1 input A, ultra low-power wake-up input and remappable pin RP0. |
| 3 | RA1/AN1/C2INA/VBG/RP1 | bidirectional | Digital I/O that also serves as analog input AN1, Comparator 2 input A, band gap reference voltage (VBG) output and remappable pin RP1. |
| 4 | RA2/AN2/C2INB/C1IND/C3INB/VREF-/CVREF | bidirectional | Digital I/O that also serves as analog input AN2, Comparator inputs C2INB, C1IND and C3INB, A/D reference voltage (low) input VREF-, and comparator reference voltage output CVREF. |
| 5 | RA3/AN3/C1INB/VREF+ | bidirectional | Digital I/O that also serves as analog input AN3, Comparator 1 input B and A/D reference voltage (high) input VREF+. |
| 6 | VDDCORE/VCAP | power_in | Positive supply for core logic when the regulator is disabled, or external filter capacitor connection when the on-chip regulator is enabled. |
| 7 | RA5/AN4/C1INC/SS1/HLVDIN/RCV/RP2 | bidirectional | Digital I/O that also serves as analog input AN4, Comparator 1 input C, MSSP1 SPI slave select SS1, High/Low-Voltage Detect input, external USB transceiver RCV input and remappable pin RP2. |
| 8 | VSS1 | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input (ST buffer in RC mode, CMOS otherwise); RA7 is disabled when OSC1 is used for the clock function. |
| 10 | OSC2/CLKO/RA6 | output | Oscillator crystal output or CLKO (FOSC/4, instruction-cycle clock in RC mode); RA6 is disabled when OSC2 is used for the clock function. |
| 11 | RC0/T1OSO/T1CKI/RP11 | bidirectional | Digital I/O that also serves as Timer1 oscillator output T1OSO, Timer1 external digital clock input T1CKI and remappable pin RP11. |
| 12 | RC1/CCP8/T1OSI/UOE/RP12 | bidirectional | Digital I/O that also serves as CCP8 capture/compare/PWM input/output, Timer1 oscillator input T1OSI, external USB transceiver NOE output and remappable pin RP12. |
| 13 | RC2/AN11/C2IND/CTPLS/RP13 | bidirectional | Digital I/O that also serves as analog input AN11, Comparator 2 input D, CTMU pulse generator output CTPLS and remappable pin RP13. |
| 14 | VUSB | power_in | USB voltage input pin. |
| 15 | RC4/D-/VM | input | Digital input (ST) that is also the USB bus minus line (D-) and external USB transceiver VM input; its input buffer level follows VUSB rather than VDD. |
| 16 | RC5/D+/VP | input | Digital input (ST) that is also the USB bus plus line (D+) and external USB transceiver VP input; its input buffer level follows VUSB rather than VDD. |
| 17 | RC6/CCP9/TX1/CK1/RP17 | bidirectional | Digital I/O, 5.5V tolerant, that also serves as CCP9 input/output, EUSART1 asynchronous transmit TX1, synchronous clock CK1 and remappable pin RP17. |
| 18 | RC7/CCP10/RX1/DT1/SDO1/RP18 | bidirectional | Digital I/O, 5.5V tolerant, that also serves as EUSART1 asynchronous receive RX1, CCP10 input/output, synchronous data DT1, SPI data output SDO1 and remappable pin RP18. |
| 19 | VSS2 | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 21 | RB0/AN12/C3IND/INT0/RP3 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared; also analog input AN12, Comparator 3 input D, external interrupt INT0 and remappable pin RP3. |
| 22 | RB1/AN10/C3INC/RTCC/RP4 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared; also analog input AN10, Comparator 3 input C, RTCC output and remappable pin RP4. |
| 23 | RB2/AN8/C2INC/CTED1/VMO/REFO/RP5 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared; also analog input AN8, Comparator 2 input C, CTMU Edge 1 input CTED1, external USB transceiver D- output VMO, reference clock output REFO and remappable pin RP5. |
| 24 | RB3/AN9/C3INA/CTED2/VPO/RP6 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared; also analog input AN9, Comparator 3 input A, CTMU Edge 2 input CTED2, external USB transceiver D+ output VPO and remappable pin RP6. |
| 25 | RB4/CCP4/KBI0/SCK1/SCL1/RP7 | bidirectional | Digital I/O, 5.5V tolerant, that also serves as CCP4 input/output, interrupt-on-change pin KBI0, MSSP1 SPI clock SCK1, I2C clock SCL1 and remappable pin RP7. |
| 26 | RB5/CCP5/KBI1/SDI1/SDA1/RP8 | bidirectional | Digital I/O, 5.5V tolerant, that also serves as CCP5 input/output, interrupt-on-change pin KBI1, MSSP1 SPI data input SDI1, I2C data SDA1 and remappable pin RP8. |
| 27 | RB6/CCP6/KBI2/PGC/RP9 | bidirectional | Digital I/O, 5.5V tolerant, that also serves as CCP6 input/output, interrupt-on-change pin KBI2, ICSP clock input PGC and remappable pin RP9. |
| 28 | RB7/CCP7/KBI3/PGD/RP10 | bidirectional | Digital I/O, 5.5V tolerant, that also serves as CCP7 input/output, interrupt-on-change pin KBI3, ICSP/ICD data pin PGD and remappable pin RP10. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage on VDD (F device, regulator enabled) | VDD | 2.15 | 3.6 | V | F-part (no LF suffix); VDDCORE pin connected to VSS through a low-ESR capacitor | 9 |
CAD (KiCad official)
- Symbol:
PIC18F27J53-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic18f27j53-i-etched.step/pic18f27j53-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f27j53-i.step/pic18f27j53-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (564 pp, sha256
c6b59eb4736c4107, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC18F27J53-I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC18F27J53-I/ML
- PIC18F27J53-I/SP
# PIC18F27J53-I/SO
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC18F27J53-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Master Clear (Reset) input; active-low Reset to the device, with ST input buffer and 5.5V tolerance. |
| 2 | RA0/AN0/C1INA/ULPWU/RP0 | bidirectional | Digital I/O (TTL/DIG) that also serves as analog input AN0, Comparator 1 input A, ultra low-power wake-up input and remappable pin RP0. |
| 3 | RA1/AN1/C2INA/VBG/RP1 | bidirectional | Digital I/O that also serves as analog input AN1, Comparator 2 input A, band gap reference voltage (VBG) output and remappable pin RP1. |
| 4 | RA2/AN2/C2INB/C1IND/C3INB/VREF-/CVREF | bidirectional | Digital I/O that also serves as analog input AN2, Comparator inputs C2INB, C1IND and C3INB, A/D reference voltage (low) input VREF-, and comparator reference voltage output CVREF. |
| 5 | RA3/AN3/C1INB/VREF+ | bidirectional | Digital I/O that also serves as analog input AN3, Comparator 1 input B and A/D reference voltage (high) input VREF+. |
| 6 | VDDCORE/VCAP | power_in | Positive supply for core logic when the regulator is disabled, or external filter capacitor connection when the on-chip regulator is enabled. |
| 7 | RA5/AN4/C1INC/SS1/HLVDIN/RCV/RP2 | bidirectional | Digital I/O that also serves as analog input AN4, Comparator 1 input C, MSSP1 SPI slave select SS1, High/Low-Voltage Detect input, external USB transceiver RCV input and remappable pin RP2. |
| 8 | VSS1 | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input (ST buffer in RC mode, CMOS otherwise); RA7 is disabled when OSC1 is used for the clock function. |
| 10 | OSC2/CLKO/RA6 | output | Oscillator crystal output or CLKO (FOSC/4, instruction-cycle clock in RC mode); RA6 is disabled when OSC2 is used for the clock function. |
| 11 | RC0/T1OSO/T1CKI/RP11 | bidirectional | Digital I/O that also serves as Timer1 oscillator output T1OSO, Timer1 external digital clock input T1CKI and remappable pin RP11. |
| 12 | RC1/CCP8/T1OSI/UOE/RP12 | bidirectional | Digital I/O that also serves as CCP8 capture/compare/PWM input/output, Timer1 oscillator input T1OSI, external USB transceiver NOE output and remappable pin RP12. |
| 13 | RC2/AN11/C2IND/CTPLS/RP13 | bidirectional | Digital I/O that also serves as analog input AN11, Comparator 2 input D, CTMU pulse generator output CTPLS and remappable pin RP13. |
| 14 | VUSB | power_in | USB voltage input pin. |
| 15 | RC4/D-/VM | input | Digital input (ST) that is also the USB bus minus line (D-) and external USB transceiver VM input; its input buffer level follows VUSB rather than VDD. |
| 16 | RC5/D+/VP | input | Digital input (ST) that is also the USB bus plus line (D+) and external USB transceiver VP input; its input buffer level follows VUSB rather than VDD. |
| 17 | RC6/CCP9/TX1/CK1/RP17 | bidirectional | Digital I/O, 5.5V tolerant, that also serves as CCP9 input/output, EUSART1 asynchronous transmit TX1, synchronous clock CK1 and remappable pin RP17. |
| 18 | RC7/CCP10/RX1/DT1/SDO1/RP18 | bidirectional | Digital I/O, 5.5V tolerant, that also serves as EUSART1 asynchronous receive RX1, CCP10 input/output, synchronous data DT1, SPI data output SDO1 and remappable pin RP18. |
| 19 | VSS2 | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 21 | RB0/AN12/C3IND/INT0/RP3 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared; also analog input AN12, Comparator 3 input D, external interrupt INT0 and remappable pin RP3. |
| 22 | RB1/AN10/C3INC/RTCC/RP4 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared; also analog input AN10, Comparator 3 input C, RTCC output and remappable pin RP4. |
| 23 | RB2/AN8/C2INC/CTED1/VMO/REFO/RP5 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared; also analog input AN8, Comparator 2 input C, CTMU Edge 1 input CTED1, external USB transceiver D- output VMO, reference clock output REFO and remappable pin RP5. |
| 24 | RB3/AN9/C3INA/CTED2/VPO/RP6 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared; also analog input AN9, Comparator 3 input A, CTMU Edge 2 input CTED2, external USB transceiver D+ output VPO and remappable pin RP6. |
| 25 | RB4/CCP4/KBI0/SCK1/SCL1/RP7 | bidirectional | Digital I/O, 5.5V tolerant, that also serves as CCP4 input/output, interrupt-on-change pin KBI0, MSSP1 SPI clock SCK1, I2C clock SCL1 and remappable pin RP7. |
| 26 | RB5/CCP5/KBI1/SDI1/SDA1/RP8 | bidirectional | Digital I/O, 5.5V tolerant, that also serves as CCP5 input/output, interrupt-on-change pin KBI1, MSSP1 SPI data input SDI1, I2C data SDA1 and remappable pin RP8. |
| 27 | RB6/CCP6/KBI2/PGC/RP9 | bidirectional | Digital I/O, 5.5V tolerant, that also serves as CCP6 input/output, interrupt-on-change pin KBI2, ICSP clock input PGC and remappable pin RP9. |
| 28 | RB7/CCP7/KBI3/PGD/RP10 | bidirectional | Digital I/O, 5.5V tolerant, that also serves as CCP7 input/output, interrupt-on-change pin KBI3, ICSP/ICD data pin PGD and remappable pin RP10. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage on VDD (F device, regulator enabled) | VDD | 2.15 | | 3.6 | V | F-part (no LF suffix); VDDCORE pin connected to VSS through a low-ESR capacitor | 9 |
## CAD (KiCad official)
- Symbol: `PIC18F27J53-I`
- Footprint: `Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm`
- 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files: `pic18f27j53-i-etched.step` / `pic18f27j53-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic18f27j53-i.step` / `pic18f27j53-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic18f27j53-i-datasheet.pdf) (564 pp, sha256 `c6b59eb4736c4107`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic18f27j53-i-datasheet.pdf)
## Other parts in this family
This page is **PIC18F27J53-I/SO**. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC18F27J53-I/ML
- PIC18F27J53-I/SP