Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18F27J13-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC18F27J13-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Master Clear (Reset) input; active-low Reset to the device and 5.5V tolerant. |
| 2 | RA0 | bidirectional | Digital I/O PORTA<0> with analog input AN0, comparator C1INA, ULPWU wake-up input and remappable pin RP0; TTL input levels. |
| 3 | RA1 | bidirectional | Digital I/O PORTA<1> with analog input AN1, comparator C2INA, band gap reference VBG output, CTMU delay input CTDIN and remappable pin RP1. |
| 4 | RA2 | bidirectional | Digital I/O PORTA<2> with analog inputs AN2, C2INB, C1IND and C3INB, A/D reference low input VREF- and comparator reference output CVREF. |
| 5 | RA3 | bidirectional | Digital I/O PORTA<3> with analog input AN3, comparator C1INB and A/D reference high input VREF+. |
| 6 | VDDCORE/VCAP | power_in | Core logic supply when the voltage regulator is disabled (LF parts); external filter capacitor connection to ground when the regulator is enabled (F parts). |
| 7 | RA5 | bidirectional | Digital I/O PORTA<5> with analog input AN4, comparator C1INC, SPI slave select SS1, high/low-voltage detect input HLVDIN and remappable pin RP2. |
| 8 | VSS1 | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input (OSC1/CLKI); can instead be used as digital I/O RA7 when the oscillator is not used for clock function. |
| 10 | OSC2/CLKO/RA6 | output | Oscillator crystal output or CLKO (FOSC/4) output in RC and EC modes; can instead be used as digital I/O RA6 when the oscillator is not used for clock function. |
| 11 | RC0 | bidirectional | Digital I/O PORTC<0> with Timer1 oscillator output T1OSO, Timer1 digital clock input T1CKI and remappable pin RP11. |
| 12 | RC1 | bidirectional | Digital I/O PORTC<1> with capture/compare/PWM input/output CCP8, Timer1 oscillator input T1OSI and remappable pin RP12. |
| 13 | RC2 | bidirectional | Digital I/O PORTC<2> with analog input AN11, comparator C2IND, CTMU pulse generator output CTPLS and remappable pin RP13. |
| 14 | RC3 | bidirectional | Digital I/O PORTC<3> with SPI clock SCK1, I2C clock SCL1 (MSSP1) and remappable pin RP14. |
| 15 | RC4 | bidirectional | Digital I/O PORTC<4> with SPI data input SDI1, I2C data SDA1 (MSSP1) and remappable pin RP15. |
| 16 | RC5 | bidirectional | Digital I/O PORTC<5> with SPI data output SDO1 (MSSP1) and remappable pin RP16. |
| 17 | RC6 | bidirectional | Digital I/O PORTC<6> with capture/compare/PWM CCP9, EUSART1 asynchronous transmit TX1, synchronous clock CK1 and remappable pin RP17; 5.5V tolerant. |
| 18 | RC7 | bidirectional | Digital I/O PORTC<7> with capture/compare/PWM CCP10, EUSART1 asynchronous receive RX1, synchronous data DT1 and remappable pin RP18; 5.5V tolerant. |
| 19 | VSS2 | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 21 | RB0 | bidirectional | Digital I/O PORTB<0> with weak pull-up, analog input AN12, comparator C3IND, external interrupt INT0 and remappable pin RP3. |
| 22 | RB1 | bidirectional | Digital I/O PORTB<1> with weak pull-up, analog input AN10, comparator C3INC, Real-Time Clock Calendar output RTCC and remappable pin RP4. |
| 23 | RB2 | bidirectional | Digital I/O PORTB<2> with weak pull-up, analog input AN8, comparator C2INC, CTMU edge 1 input CTED1, reference clock output REFO and remappable pin RP5. |
| 24 | RB3 | bidirectional | Digital I/O PORTB<3> with weak pull-up, analog input AN9, comparator C3INA, CTMU edge 2 input CTED2 and remappable pin RP6. |
| 25 | RB4 | bidirectional | Digital I/O PORTB<4> with weak pull-up, capture/compare/PWM CCP4, interrupt-on-change KBI0, I2C clock SCL2 (MSSP2) and remappable pin RP7; 5.5V tolerant. |
| 26 | RB5 | bidirectional | Digital I/O PORTB<5> with weak pull-up, capture/compare/PWM CCP5, interrupt-on-change KBI1, I2C data SDA2 (MSSP2) and remappable pin RP8; 5.5V tolerant. |
| 27 | RB6 | bidirectional | Digital I/O PORTB<6> with weak pull-up, capture/compare/PWM CCP6, interrupt-on-change KBI2, ICSP clock PGC and remappable pin RP9; 5.5V tolerant. |
| 28 | RB7 | bidirectional | Digital I/O PORTB<7> with weak pull-up, capture/compare/PWM CCP7, interrupt-on-change KBI3, ICD/ICSP data PGD and remappable pin RP10; 5.5V tolerant. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD (F part, voltage regulator enabled) | VDD | 2.15 | 3.6 | V | F part number (voltage regulator enabled) | 9 |
CAD (KiCad official)
- Symbol:
PIC18F27J13-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic18f27j13-i-etched.step/pic18f27j13-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f27j13-i.step/pic18f27j13-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (537 pp, sha256
961e405e1ed75010, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).