main
Ray
Publish 0.1.3
f7a685d
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302
{
"slug": "pic18f26k83-i-ss",
"version": "0.1.3",
"type": "component",
"description": "Microchip Microcontrollers (MCU/MPU/SOC), SSOP-28-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"mcu",
"pic18f26k83-i"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"pic18f26k83-i.kicad_sym",
"pic18f26k83-i.kicad_mod",
"pic18f26k83-i.glb",
"pic18f26k83-i.step",
"pic18f26k83-i.lbr",
"docs/hero.png",
"docs/pic18f26k83-i-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"pic18f26k83-i-etched.step",
"pic18f26k83-i-etched.glb",
"pic18f26k83-i-ss-hero.glb",
"pic18f26k83-i-ss-hero.overlay.json"
],
"visibility": "public",
"author": {
"name": "Ray"
},
"component": {
"mpn": "PIC18F26K83-I/SS",
"manufacturer": "Microchip",
"package": "SSOP-28-208mil",
"pin_count": 28,
"category": "Microcontrollers (MCU/MPU/SOC)",
"parts": {
"symbol": "pic18f26k83-i.kicad_sym",
"footprint": "pic18f26k83-i.kicad_mod",
"model_3d": "pic18f26k83-i-ss-hero.glb",
"model_3d_plain": "pic18f26k83-i.glb",
"model_3d_step": "pic18f26k83-i-etched.step",
"model_3d_step_plain": "pic18f26k83-i.step",
"lbr": "pic18f26k83-i.lbr"
},
"pins": [
{
"number": "1",
"name": "MCLR/VPP/RE3",
"type": "input",
"description": "Active-low master clear (device reset) input with internal weak pull-up; also high-voltage programming supply (VPP) during ICSP. May be repurposed as digital input-only RE3 when MCLR is disabled in configuration."
},
{
"number": "2",
"name": "RA0",
"type": "bidirectional",
"description": "PORTA bit 0 general-purpose I/O with IOC. Analog channel ANA0 and comparator C1IN0-/C2IN0- inverting inputs. 5 V-tolerant per device family (F: 5.5 V max VDD)."
},
{
"number": "3",
"name": "RA1",
"type": "bidirectional",
"description": "PORTA bit 1 GPIO with IOC. Analog channel ANA1 and comparator C1IN1-/C2IN1- inverting inputs."
},
{
"number": "4",
"name": "RA2",
"type": "bidirectional",
"description": "PORTA bit 2 GPIO with IOC. Analog channel ANA2, external voltage-reference negative input (VREF-), DAC1OUT1 output, and comparator C1IN0+/C2IN0+ non-inverting inputs."
},
{
"number": "5",
"name": "RA3",
"type": "bidirectional",
"description": "PORTA bit 3 GPIO with IOC. Analog channel ANA3, external voltage-reference positive input (VREF+), comparator C1IN1+ non-inverting input, and DSM MD1CARL PPS input."
},
{
"number": "6",
"name": "RA4",
"type": "bidirectional",
"description": "PORTA bit 4 GPIO with IOC. Analog channel ANA4, Timer0 clock input T0CKI (PPS) and DSM MD1CARH PPS input."
},
{
"number": "7",
"name": "RA5",
"type": "bidirectional",
"description": "PORTA bit 5 GPIO with IOC. Analog channel ANA5, SPI slave-select SS1 (PPS) and DSM MD1SRC PPS input."
},
{
"number": "8",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic and I/O. Connect to system 0 V. This is one of two VSS pins on the 28-pin SPDIP/SOIC/SSOP package (pins 8 and 19)."
},
{
"number": "9",
"name": "RA7/OSC1/CLKIN",
"type": "bidirectional",
"description": "PORTA bit 7 GPIO with IOC. Also primary oscillator input (OSC1) or external clock input (CLKIN), and analog channel ANA7."
},
{
"number": "10",
"name": "RA6/OSC2/CLKOUT",
"type": "bidirectional",
"description": "PORTA bit 6 GPIO with IOC. Also primary oscillator output (OSC2) or FOSC/4 clock output (CLKOUT), and analog channel ANA6."
},
{
"number": "11",
"name": "RC0/SOSCO",
"type": "bidirectional",
"description": "PORTC bit 0 GPIO with IOC. Secondary oscillator output SOSCO, analog channel ANC0, Timer1/3 clock/gate inputs T1CKI/T3CKI/T3G (PPS) and SMT1WIN PPS input."
},
{
"number": "12",
"name": "RC1/SOSCI",
"type": "bidirectional",
"description": "PORTC bit 1 GPIO with IOC. Secondary oscillator input SOSCI, analog channel ANC1, SMT1SIG and CCP2 PPS inputs."
},
{
"number": "13",
"name": "RC2",
"type": "bidirectional",
"description": "PORTC bit 2 GPIO with IOC. Analog channel ANC2, Timer5 clock T5CKI (PPS) and CCP1 (PPS) inputs."
},
{
"number": "14",
"name": "RC3",
"type": "bidirectional",
"description": "PORTC bit 3 GPIO with IOC. Analog channel ANC3, default I2C1 SCL and SPI1 SCK (both PPS, bidirectional), Timer2 input T2IN (PPS)."
},
{
"number": "15",
"name": "RC4",
"type": "bidirectional",
"description": "PORTC bit 4 GPIO with IOC. Analog channel ANC4, default I2C1 SDA (PPS, bidirectional, I2C/SMBus tolerant) and SPI1 SDI (PPS) inputs."
},
{
"number": "16",
"name": "RC5",
"type": "bidirectional",
"description": "PORTC bit 5 GPIO with IOC. Analog channel ANC5 and Timer4 input T4IN (PPS)."
},
{
"number": "17",
"name": "RC6",
"type": "bidirectional",
"description": "PORTC bit 6 GPIO with IOC. Analog channel ANC6 and UART1 CTS1 PPS input."
},
{
"number": "18",
"name": "RC7",
"type": "bidirectional",
"description": "PORTC bit 7 GPIO with IOC. Analog channel ANC7 and UART1 RX1 PPS input."
},
{
"number": "19",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for logic and I/O. Connect to system 0 V. Second VSS pin on the 28-pin SPDIP/SOIC/SSOP package."
},
{
"number": "20",
"name": "VDD",
"type": "power_in",
"description": "Positive supply. 2.3-5.5 V for PIC18F26K83 (F variant), 1.8-3.6 V for PIC18LF26K83 (LF variant). Decouple with 100 nF close to the pin."
},
{
"number": "21",
"name": "RB0",
"type": "bidirectional",
"description": "PORTB bit 0 GPIO with IOC and external interrupt INT0 (PPS). Analog channel ANB0, comparator C2IN1+ non-inverting input, Zero-Cross Detect (ZCD) input, CCP4 PPS input and CWG1 fault input."
},
{
"number": "22",
"name": "RB1",
"type": "bidirectional",
"description": "PORTB bit 1 GPIO with IOC and external interrupt INT1 (PPS). Analog channel ANB1, comparator C1IN3-/C2IN3-, default I2C2 SCL (PPS, bidirectional, I2C/SMBus tolerant) and CWG2 PPS input."
},
{
"number": "23",
"name": "RB2",
"type": "bidirectional",
"description": "PORTB bit 2 GPIO with IOC and external interrupt INT2 (PPS). Analog channel ANB2, default I2C2 SDA (PPS, bidirectional, I2C/SMBus tolerant) and CWG3 PPS input."
},
{
"number": "24",
"name": "RB3",
"type": "bidirectional",
"description": "PORTB bit 3 GPIO with IOC. Analog channel ANB3, comparator C1IN2-/C2IN2- inverting inputs and CAN receive input CANRX (PPS)."
},
{
"number": "25",
"name": "RB4",
"type": "bidirectional",
"description": "PORTB bit 4 GPIO with IOC. Analog channel ANB4, ADC external trigger ADACT (PPS), Timer5 gate T5G, SMT2WIN and CLCIN2 PPS inputs."
},
{
"number": "26",
"name": "RB5",
"type": "bidirectional",
"description": "PORTB bit 5 GPIO with IOC. Analog channel ANB5, Timer1 gate T1G, SMT2SIG, CCP3 and CLCIN3 PPS inputs."
},
{
"number": "27",
"name": "RB6/ICSPCLK",
"type": "bidirectional",
"description": "PORTB bit 6 GPIO with IOC. Also In-Circuit Serial Programming clock (ICSPCLK) and In-Circuit Debug clock. Analog channel ANB6 and UART2 CTS2 PPS input."
},
{
"number": "28",
"name": "RB7/ICSPDAT",
"type": "bidirectional",
"description": "PORTB bit 7 GPIO with IOC. Also In-Circuit Serial Programming data (ICSPDAT) and In-Circuit Debug data. Analog channel ANB7, DAC1OUT2, Timer6 input T6IN and UART2 RX2 PPS input."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
"cad": "KiCad official (CC-BY-SA 4.0)",
"cad_basis": {
"from": [
"README CAD section (factory cad_wording)"
],
"missing": []
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T19:13:42Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "pic18f26k83-i.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
10.2,
2.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "pic18f26k83-i-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
10.2,
2.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "58550d4664da8110a5aec6e16a74490c638300352cf2628ab1b1595f2e675ab4",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"family": {
"base": "PIC18F26K83-I",
"siblings": [
"PIC18F26K83-I/ML"
],
"old_slug": "pic18f26k83-i",
"note": "renamed from the cut-base slug to the part it was built from (slug collision split, 2026-11-11)"
}
},
"org": "adom"
}