3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18F26K83-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC18F26K83-E from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VPP/MCLR/RE3 | input | Input-only pin RE3 that serves as Master Clear (MCLR) reset with internal weak pull-up to VDD, or as the high-voltage programming VPP input. |
| 2 | RA0 | bidirectional | PORTA bit 0 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 3 | RA1 | bidirectional | PORTA bit 1 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 4 | RA2 | bidirectional | PORTA bit 2 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 5 | RA3 | bidirectional | PORTA bit 3 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 6 | RA4 | bidirectional | PORTA bit 4 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 7 | RA5 | bidirectional | PORTA bit 5 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 8 | VSS | power_in | Ground reference; all VDD and VSS pins must always be connected. |
| 9 | RA7 | bidirectional | PORTA bit 7 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 10 | RA6 | bidirectional | PORTA bit 6 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 11 | RC0 | bidirectional | PORTC bit 0 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 12 | RC1 | bidirectional | PORTC bit 1 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 13 | RC2 | bidirectional | PORTC bit 2 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 14 | RC3 | bidirectional | PORTC bit 3 general-purpose I/O with I2C-specific pad option, programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 15 | RC4 | bidirectional | PORTC bit 4 general-purpose I/O with I2C-specific pad option, programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 16 | RC5 | bidirectional | PORTC bit 5 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 17 | RC6 | bidirectional | PORTC bit 6 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 18 | RC7 | bidirectional | PORTC bit 7 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 19 | VSS | power_in | Ground reference; all VDD and VSS pins must always be connected. |
| 20 | VDD | power_in | Positive supply, 2.3V to 5.5V for PIC18F26K83, with a 0.1 uF decoupling capacitor required close to the VDD/VSS pair. |
| 21 | RB0 | bidirectional | PORTB bit 0 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 22 | RB1 | bidirectional | PORTB bit 1 general-purpose I/O with I2C-specific pad option, programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 23 | RB2 | bidirectional | PORTB bit 2 general-purpose I/O with I2C-specific pad option, programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 24 | RB3 | bidirectional | PORTB bit 3 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 25 | RB4 | bidirectional | PORTB bit 4 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 26 | RB5 | bidirectional | PORTB bit 5 general-purpose I/O with individually programmable direction, open-drain, slew rate and weak pull-up, and interrupt-on-change. |
| 27 | RB6/ICSPCLK | bidirectional | PORTB bit 6 general-purpose I/O that is also the ICSP programming and debug clock input (ICSPCLK). |
| 28 | RB7/ICSPDAT | bidirectional | PORTB bit 7 general-purpose I/O that is also the bidirectional ICSP programming and debug data pin (ICSPDAT). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating supply voltage (FOSC 16 MHz) | VDD | 2.3 | 5.5 | V | VDDMIN for FOSC 16 MHz, PIC18F25/26K83 | 795 | |
| Operating supply voltage (FOSC 32 MHz) | VDD | 2.5 | 5.5 | V | VDDMIN for FOSC 32 MHz, PIC18F25/26K83 | 795 | |
| Operating supply voltage (FOSC 64 MHz) | VDD | 3 | 5.5 | V | VDDMIN for FOSC 64 MHz, PIC18F25/26K83 | 795 | |
| Industrial operating ambient temperature | TA | -40 | 85 | °C | Industrial temperature range | 795 | |
| Extended operating ambient temperature | TA | -40 | 125 | °C | Extended temperature range | 795 | |
| RAM data retention voltage | VDR | 1.7 | V | Device in Sleep mode | 797 | ||
| Power-on Reset release voltage | VPOR | 1.6 | V | BOR or LPBOR disabled | 797 | ||
| Power-on Reset rearm voltage | VPORR | 1.5 | V | BOR or LPBOR disabled | 797 | ||
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | BOR or LPBOR disabled | 797 | ||
| Supply current XT 4 MHz | IDDXT4 | 1004 | 1300 | µA | XT = 4 MHz, 3.0V | 799 | |
| Supply current HFINTOSC 16 MHz | IDDHFO16 | 4.1 | 5.1 | mA | HFINTOSC = 16 MHz, 3.0V | 799 | |
| Supply current HFINTOSC PLL 64 MHz | IDDHFOPLL | 16.7 | 19 | mA | HFINTOSC = 64 MHz, 3.0V | 799 | |
| Supply current IDLE mode | IDDIDLE | 2.9 | 4.5 | mA | IDLE mode, HFINTOSC = 16 MHz, 3.0V | 799 | |
| Power-down current IPD base at +85°C | IPD | 0.4 | 2.5 | µA | IPD Base, VREGPM = 1, +85°C, 3.0V | 800 | |
| Power-down current IPD base at +125°C | IPD | 0.4 | 8 | µA | IPD Base, VREGPM = 1, +125°C, 3.0V | 800 | |
| Input low voltage TTL buffer | VIL | 0.8 | V | I/O port with TTL buffer, 4.5V VDD 5.5V | 801 | ||
| Input high voltage TTL buffer | VIH | 2 | V | I/O port with TTL buffer, 4.5V VDD 5.5V | 801 | ||
| Input leakage current I/O ports | IIL | -125 | 5 | 125 | nA | VSS VPIN VDD, pin at high-impedance, 85°C | 801 |
| Weak pull-up current | IPUR | 25 | 120 | 200 | µA | VDD = 3.0V, VPIN = VSS | 801 |
| Output low voltage I/O ports | VOL | 0.6 | V | IOL = 10.0 mA, VDD = 3.0V | 801 | ||
| All I/O pin capacitance | CIO | 5 | 50 | pF | 801 | ||
| Absolute maximum VDD pin voltage PIC18F | VDD | -0.3 | 6.5 | V | Voltage on VDD pin with respect to VSS, PIC18F25/26K83 | 794 | |
| Absolute maximum MCLR pin voltage | VMCLR | -0.3 | 9 | V | Voltage on MCLR pin with respect to VSS | 794 | |
| Ambient temperature under bias | TA | -40 | 125 | °C | Ambient temperature under bias | 794 | |
| Storage temperature | TSTG | -65 | 150 | °C | Storage temperature | 794 | |
| Maximum current on VSS pin -40°C to +85°C | IVSS | 350 | mA | -40°C TA +85°C | 794 | ||
| Maximum current on VSS pin 85°C to +125°C | IVSS | 120 | mA | 85°C TA +125°C | 794 | ||
| Maximum current on VDD pin for 28-pin devices -40°C to +85°C | IVDD | 250 | mA | -40°C TA +85°C | 794 | ||
| Maximum current on VDD pin for 28-pin devices 85°C to +125°C | IVDD | 85 | mA | 85°C TA +125°C | 794 | ||
| Maximum current on any standard I/O pin | IIO | 50 | mA | 794 | |||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 794 | ||
| Total power dissipation | PD | 800 | mW | 794 | |||
| Thermal resistance junction to ambient SSOP-28 | θJA | 90 | °C/W | 28-pin SSOP package | 803 | ||
| Thermal resistance junction to case SSOP-28 | θJC | 24 | °C/W | 28-pin SSOP package | 803 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 803 | |||
| Fixed voltage reference accuracy 1x gain | VFVR1 | -4 | 4 | % | VDD 2.5V, -40°C to 85°C | 815 | |
| Fixed voltage reference accuracy 2x gain | VFVR2 | -4 | 4 | % | VDD 2.5V, -40°C to 85°C | 815 | |
| Fixed voltage reference accuracy 4x gain | VFVR4 | -5 | 5 | % | VDD 4.75V, -40°C to 85°C | 815 | |
| Brown-out low-power reset voltage | VLPBOR | 1.8 | 1.9 | 2.2 | V | 811 | |
| LFINTOSC frequency | FLFOSC | 31 | kHz | 807 | |||
| Comparator input offset voltage | CM01 | -40 | 40 | mV | VICM = VDD/2, VDD = 3.0V, TA = 25°C | 815 | |
| Comparator hysteresis | VHYST | 10 | 25 | 40 | mV | VDD = 3.0V, TA = 25°C | 815 |
| Zero cross detect maximum source or sink current | IZCD_MAX | 600 | µA | VDD = 3.0V, TA = 25°C | 815 |
CAD (KiCad official)
- Symbol:
PIC18F26K83-E - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic18f26k83-e-etched.step/pic18f26k83-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f26k83-e.step/pic18f26k83-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (870 pp, sha256
c232365457565675, retrieved 2026-11-09, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).