← Commit history
Publish 0.1.1
8 files changed
+951−952
README.md+84−84@@ -8,34 +8,34 @@ PIC18F26K42T-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descript | Pin | Name | Type | Function | |---|---|---|---|-| 1 | RA2 | bidirectional | PORTA I/O pin RA2 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability. |-| 2 | RA3 | bidirectional | PORTA I/O pin RA3 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability. |-| 3 | RA4 | bidirectional | PORTA I/O pin RA4 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability. |-| 4 | RA5 | bidirectional | PORTA I/O pin RA5 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability. |-| 5 | VSS | power_in | Ground reference pin; all VDD and VSS pins must always be connected. |-| 6 | RA7 | bidirectional | PORTA I/O pin RA7 (also OSC1/CLKIN external oscillator input function) with programmable direction, open-drain, slew rate and weak pull-up control. |-| 7 | RA6 | bidirectional | PORTA I/O pin RA6 (also OSC2/CLKOUT function, FOSC/4 when CLKOUTEN is enabled) with programmable direction, open-drain, slew rate and weak pull-up control. |-| 8 | RC0 | bidirectional | PORTC I/O pin RC0 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability. |-| 9 | RC1 | bidirectional | PORTC I/O pin RC1 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability. |-| 10 | RC2 | bidirectional | PORTC I/O pin RC2 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability. |-| 11 | RC3 | bidirectional | PORTC I/O pin RC3 with I2C-specific pad option (RC3I2C register) and programmable direction, open-drain, slew rate and weak pull-up control. |-| 12 | RC4 | bidirectional | PORTC I/O pin RC4 with I2C-specific pad option (RC4I2C register) and programmable direction, open-drain, slew rate and weak pull-up control. |-| 13 | RC5 | bidirectional | PORTC I/O pin RC5 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability. |-| 14 | RC6 | bidirectional | PORTC I/O pin RC6 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability. |-| 15 | RC7 | bidirectional | PORTC I/O pin RC7 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability. |-| 16 | VSS | power_in | Ground reference pin; all VDD and VSS pins must always be connected. |-| 17 | VDD | power_in | Positive supply, 2.3V to 5.5V for PIC18F26K42; a 0.1 uF decoupling capacitor is recommended on every VDD/VSS pair. |-| 18 | RB0 | bidirectional | PORTB I/O pin RB0 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability. |-| 19 | RB1 | bidirectional | PORTB I/O pin RB1 with I2C-specific pad option (RB1I2C register) and programmable direction, open-drain, slew rate and weak pull-up control. |-| 20 | RB2 | bidirectional | PORTB I/O pin RB2 with I2C-specific pad option (RB2I2C register) and programmable direction, open-drain, slew rate and weak pull-up control. |-| 21 | RB3 | bidirectional | PORTB I/O pin RB3 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability. |-| 22 | RB4 | bidirectional | PORTB I/O pin RB4 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability. |-| 23 | RB5 | bidirectional | PORTB I/O pin RB5 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability. |-| 24 | RB6/ICSPCLK | bidirectional | PORTB I/O pin RB6 that is also the ICSP programming and debugging clock input; pull-ups, series diodes and capacitors are not recommended on it. |-| 25 | RB7/ICSPDAT | bidirectional | PORTB I/O pin RB7 that is also the ICSP bidirectional serial data pin for programming and debugging; pull-ups, series diodes and capacitors are not recommended on it. |-| 26 | RE3/MCLR/VPP | input | Input-only pin RE3 that serves as active-low Master Clear reset (internal weak pull-up to VDD when MCLR is enabled) and as programming voltage input VPP. |-| 27 | RA0 | bidirectional | PORTA I/O pin RA0 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability. |-| 28 | RA1 | bidirectional | PORTA I/O pin RA1 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability. |+| 1 | RA2 | bidirectional | PORTA bit 2 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions. |+| 2 | RA3 | bidirectional | PORTA bit 3 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions. |+| 3 | RA4 | bidirectional | PORTA bit 4 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions. |+| 4 | RA5 | bidirectional | PORTA bit 5 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions. |+| 5 | VSS | power_in | Ground reference; all VDD and VSS pins must always be connected. |+| 6 | RA7 | bidirectional | PORTA bit 7 general-purpose I/O (shares OSC1/CLKIN function) with interrupt-on-change and PPS-mapped digital functions. |+| 7 | RA6 | bidirectional | PORTA bit 6 general-purpose I/O (shares OSC2/CLKOUT function) with interrupt-on-change and PPS-mapped digital functions. |+| 8 | RC0 | bidirectional | PORTC bit 0 general-purpose I/O with analog input via ANSELC, interrupt-on-change and PPS-mapped digital functions. |+| 9 | RC1 | bidirectional | PORTC bit 1 general-purpose I/O with analog input via ANSELC, interrupt-on-change and PPS-mapped digital functions. |+| 10 | RC2 | bidirectional | PORTC bit 2 general-purpose I/O with analog input via ANSELC, interrupt-on-change and PPS-mapped digital functions. |+| 11 | RC3 | bidirectional | PORTC bit 3 general-purpose I/O with I2C-specific pad (RC3I2C control), interrupt-on-change and PPS-mapped digital functions. |+| 12 | RC4 | bidirectional | PORTC bit 4 general-purpose I/O with I2C-specific pad (RC4I2C control), interrupt-on-change and PPS-mapped digital functions. |+| 13 | RC5 | bidirectional | PORTC bit 5 general-purpose I/O with analog input via ANSELC, interrupt-on-change and PPS-mapped digital functions. |+| 14 | RC6 | bidirectional | PORTC bit 6 general-purpose I/O with interrupt-on-change and PPS-mapped digital functions (e.g. UART1 TX output via RC6PPS). |+| 15 | RC7 | bidirectional | PORTC bit 7 general-purpose I/O with interrupt-on-change and PPS-mapped digital functions (e.g. UART1 RX input via U1RXPPS). |+| 16 | VSS | power_in | Ground reference; all VDD and VSS pins must always be connected. |+| 17 | VDD | power_in | Positive supply, 2.3V to 5.5V for PIC18F26K42; requires a 0.1 uF decoupling capacitor and must always be connected. |+| 18 | RB0 | bidirectional | PORTB bit 0 general-purpose I/O with analog input via ANSELB, interrupt-on-change and PPS-mapped digital functions. |+| 19 | RB1 | bidirectional | PORTB bit 1 general-purpose I/O with I2C-specific pad (RB1I2C control), interrupt-on-change and PPS-mapped digital functions. |+| 20 | RB2 | bidirectional | PORTB bit 2 general-purpose I/O with I2C-specific pad (RB2I2C control), interrupt-on-change and PPS-mapped digital functions. |+| 21 | RB3 | bidirectional | PORTB bit 3 general-purpose I/O with analog input via ANSELB, interrupt-on-change and PPS-mapped digital functions. |+| 22 | RB4 | bidirectional | PORTB bit 4 general-purpose I/O with analog input via ANSELB, interrupt-on-change and PPS-mapped digital functions. |+| 23 | RB5 | bidirectional | PORTB bit 5 general-purpose I/O with analog input via ANSELB, interrupt-on-change and PPS-mapped digital functions. |+| 24 | RB6/ICSPCLK | bidirectional | PORTB bit 6 I/O, also the In-Circuit Serial Programming clock input; reads '1' in Debug mode. |+| 25 | RB7/ICSPDAT | bidirectional | PORTB bit 7 I/O, also the bidirectional In-Circuit Serial Programming data pin; reads '1' in Debug mode. |+| 26 | RE3/MCLR/VPP | input | Input-only pin RE3 that functions as Master Clear (Reset) input when MCLR is enabled (always when LVP = 1) and as programming voltage input; has an internal weak pull-up when MCLR is enabled. |+| 27 | RA0 | bidirectional | PORTA bit 0 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions. |+| 28 | RA1 | bidirectional | PORTA bit 1 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions. | | 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). | ## Key specifications@@ -55,77 +55,77 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries |---|---|---|---|---|---|---|---| | Ambient temperature under bias | | -40 | | 125 | °C | | 738 | | Storage temperature | | -65 | | 150 | °C | | 738 |-| Voltage on VDD pin with respect to VSS | VDD | -0.3 | | 6.5 | V | PIC18F26/27/45/46/47/55/56/57K42 | 738 |+| Voltage on VDD pin with respect to VSS | | -0.3 | | 6.5 | V | PIC18F (non-LF) device | 738 | | Voltage on MCLR pin with respect to VSS | | -0.3 | | 9 | V | | 738 |-| Maximum current on VSS pin | | | | 350 | mA | -40°C TA +85°C | 738 |-| Maximum current on VSS pin | | | | 120 | mA | +85°C TA +125°C | 738 |-| Maximum current on VDD pin for 28-Pin devices | | | | 250 | mA | -40°C TA +85°C | 738 |-| Maximum current on VDD pin for 28-Pin devices | | | | 85 | mA | +85°C TA +125°C | 738 |+| Voltage on all other pins with respect to VSS | | -0.3 | | | V | upper limit printed as VDD + 0.3V | 738 |+| Maximum current on VSS pin | | | | 350 | mA | -40°C ≤ TA ≤ +85°C | 738 |+| Maximum current on VDD pin (28-pin devices) | | | | 250 | mA | -40°C ≤ TA ≤ +85°C | 738 | | Maximum current on any standard I/O pin | | | | 50 | mA | | 738 | | Clamp current | IK | | | 20 | mA | VPIN < 0 or VPIN > VDD | 738 | | Total power dissipation | | | | 800 | mW | | 738 |-| Operating supply voltage VDDMIN | VDDMIN | 2.3 | | | V | Fosc 16 MHz | 739 |-| Operating supply voltage VDDMIN | VDDMIN | 2.5 | | | V | Fosc 32 MHz | 739 |-| Operating supply voltage VDDMIN | VDDMIN | 2.7 | | | V | Fosc 64 MHz | 739 |-| Operating supply voltage VDDMAX | VDDMAX | | | 5.5 | V | | 739 |-| Operating ambient temperature TA_MIN (industrial) | TA_MIN | -40 | | | °C | Industrial temperature | 739 |-| Operating ambient temperature TA_MAX (industrial) | TA_MAX | | | 85 | °C | Industrial temperature | 739 |-| RAM Data Retention voltage | VDR | 1.7 | | | V | Device in Sleep mode | 741 |-| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | | | V/ms | BOR or LPBOR disabled | 741 |-| Supply current XT = 4 MHz | IDDXT4 | | 680 | 1100 | µA | 3.0V | 743 |-| Supply current HFINTOSC = 16 MHz | IDDHFO16 | | 3 | 4.2 | mA | 3.0V | 743 |-| Supply current HFINTOSC = 64 MHz (PLL) | IDDHFOPLL | | 11.6 | 14 | mA | 3.0V | 743 |-| Supply current HS+PLL = 64 MHz | IDDHSPLL64 | | 9.9 | 13 | mA | 3.0V | 743 |-| Supply current Idle mode, HFINTOSC = 16 MHz | IDDIDLE | | 1.9 | 2.9 | mA | 3.0V | 743 |-| Power-down current IPD Base | IPD | | 0.4 | 4 | µA | VREGPM = 1, Max +85°C, 3.0V | 745 |-| Power-down current IPD with VREGPM = 0 | IPD | | 20 | 32 | µA | VREGPM = 0, Max +85°C, 3.0V | 745 |-| Power-down current Low-Frequency Internal Oscillator/WDT | IPD_WDT | | 1 | 4.8 | µA | Max +85°C, 3.0V | 745 |-| Power-down current Secondary Oscillator (SOSC) | IPD_SOSC | | 1 | 6 | µA | LP mode, Max +85°C, 3.0V | 745 |-| Power-down current FVR | IPD_FVR | | 33 | 76 | µA | FVRCON = 0x81 or 0x84, Max +85°C, 3.0V | 745 |-| Power-down current Brown-out Reset (BOR) | IPD_BOR | | 9.8 | 16 | µA | Max +85°C, 3.0V | 745 |-| Power-down current Low-Power Brown-out Reset (LPBOR) | IPD_LPBOR | | 0.1 | 3 | µA | Max +85°C, 3.0V | 745 |-| Power-down current High/Low Voltage Detect (HLVD) | IPD_HLVD | | 9.5 | 14 | µA | Max +85°C, 3.0V | 745 |-| Power-down current ADC Nonconverting | IPD_ADCA | | 0.4 | 4 | µA | ADC not converting, Max +85°C, 3.0V | 745 |-| Power-down current Comparator | IPD_CMP | | 26 | 49 | µA | Max +85°C, 3.0V | 745 |-| Input Low Voltage, I/O port with TTL buffer | VIL | | | 0.8 | V | 4.5V VDD 5.5V | 746 |-| Input Low Voltage, I/O port | VIL | | | 0.15 | xVDD | 1.8V VDD < 4.5V | 746 |-| Input Low Voltage, I/O port with Schmitt Trigger buffer | VIL | | | 0.2 | xVDD | 2.0V VDD 5.5V | 746 |-| Input Low Voltage, I/O port with I2C levels | VIL | | | 0.3 | xVDD | 2.0V VDD 5.5V | 746 |-| Input Low Voltage, I/O port with SMBus 2.0 | VIL | | | 0.8 | V | 2.7V VDD 5.5V | 746 |-| Input Low Voltage, I/O port with SMBus 3.0 | VIL | | | 0.8 | V | 1.8V VDD 5.5V | 746 |-| Input Low Voltage, MCLR | VIL | | | 0.2 | xVDD | | 746 |-| Input High Voltage, I/O port with TTL buffer | VIH | 2 | | | V | 4.5V VDD 5.5V | 746 |-| Input High Voltage, I/O port with Schmitt Trigger buffer | VIH | 0.8 | | | xVDD | 2.0V VDD 5.5V | 746 |-| Input High Voltage, I/O port with I2C levels | VIH | 0.7 | | | xVDD | | 746 |-| Input High Voltage, I/O port with SMBus 2.0 | VIH | 2.1 | | | V | 2.7V VDD 5.5V | 746 |-| Input High Voltage, I/O port with SMBus 3.0 | VIH | 1.35 | | | V | 1.8V VDD 5.5V | 746 |-| Input High Voltage, MCLR | VIH | 0.7 | | | xVDD | | 746 |-| Input Leakage Current, I/O ports | IIL | -125 | | 125 | nA | VSS VPIN VDD, Pin at high-impedance, 85°C | 746 |-| Input Leakage Current, MCLR | IIL | -200 | | 200 | nA | VSS VPIN VDD, Pin at high-impedance, 85°C | 746 |-| Weak Pull-up Current | IPUR | 25 | 120 | 200 | µA | VDD = 3.0V, VPIN = VSS | 746 |-| Output Low Voltage, I/O ports | VOL | | | 0.6 | V | IOL = 10.0 mA, VDD = 3.0V | 746 |-| Capacitance, All I/O pins | CIO | | 5 | 50 | pF | | 746 |-| Data EEPROM Byte Endurance | ED | 100 | | | kE/W | -40°C TA +85°C | 747 |-| Program Flash Memory Cell Endurance | EP | 10 | | | kE/W | -40°C TA +85°C | 747 |-| Data EEPROM Byte Erase and Write Cycle Time | TD_BEW | | 4 | 5 | ms | | 747 |-| Program Flash Self-Timed Row Erase or Self-Timed Write | TP_REW | | 2 | 2.5 | ms | | 747 |-| Secondary Oscillator Clock Frequency | FSEC | 32.4 | 32.768 | 33.1 | kHz | | 750 |-| PLL Input Frequency Range | FPLLIN | 4 | | 16 | MHz | VDD 2.5V | 753 |-| Thermal Resistance Junction to Ambient | θJA | | 27.5 | | °C/W | 28-pin QFN 6x6mm package | 748 |-| Thermal Resistance Junction to Case | θJC | | 24 | | °C/W | 28-pin QFN 6x6mm package | 748 |+| Operating ambient temperature, minimum (industrial) | TA_MIN | -40 | | | °C | Industrial temperature (-I) | 739 |+| Operating ambient temperature, maximum (industrial) | TA_MAX | | | 85 | °C | Industrial temperature (-I) | 739 |+| Supply voltage VDD | VDD | 2.3 | | 5.5 | V | FOSC 16 MHz | 741 |+| Supply voltage VDD | VDD | 2.5 | | 5.5 | V | FOSC 16 MHz | 741 |+| Supply voltage VDD | VDD | 2.7 | | 5.5 | V | FOSC 32 MHz | 741 |+| RAM data retention voltage | VDR | 1.7 | | | V | Device in Sleep mode | 741 |+| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | | | V/ms | BOR or LPBOR disabled | 741 |+| Supply current, XT = 4 MHz | IDDXT4 | | 680 | 1100 | µA | XT = 4 MHz, VDD 3.0V | 743 |+| Supply current, HFINTOSC = 16 MHz | IDDHFO16 | | 3 | 4.2 | mA | HFINTOSC = 16 MHz, VDD 3.0V | 743 |+| Supply current, HFINTOSC = 64 MHz | IDDHFOPLL | | 11.6 | 14 | mA | HFINTOSC = 64 MHz, VDD 3.0V | 743 |+| Supply current, HS+PLL = 64 MHz | IDDHSPLL64 | | 9.9 | 13 | mA | HS+PLL = 64 MHz, VDD 3.0V | 743 |+| Supply current, Idle mode | IDDIDLE | | 1.9 | 2.9 | mA | Idle mode, HFINTOSC = 16 MHz, VDD 3.0V | 743 |+| Power-down current, IPD base | IPD | | 0.4 | 4 | µA | VREGPM = 1, +85°C, VDD 3.0V | 745 |+| Power-down current, IPD base | IPD | | 0.4 | 14 | µA | VREGPM = 1, +125°C, VDD 3.0V | 745 |+| Power-down current, IPD base (VREGPM = 0) | IPD | | 20 | 32 | µA | VREGPM = 0, +85°C, VDD 3.0V | 745 |+| Power-down current, IPD base (VREGPM = 0) | IPD | | 20 | 42 | µA | VREGPM = 0, +125°C, VDD 3.0V | 745 |+| Power-down current, FVR | IPD_FVR | | 33 | 76 | µA | FVRCON = 0x81 or 0x84, +85°C, VDD 3.0V | 745 |+| Power-down current, BOR | IPD_BOR | | 9.8 | 16 | µA | +85°C, VDD 3.0V | 745 |+| Power-down current, LPBOR | IPD_LPBOR | | 0.1 | 3 | µA | +85°C, VDD 3.0V | 745 |+| Power-down current, HLVD | IPD_HLVD | | 9.5 | 14 | µA | +85°C, VDD 3.0V | 745 |+| Power-down current, comparator | IPD_CMP | | 26 | 49 | µA | +85°C, VDD 3.0V | 745 |+| Input low voltage, TTL buffer | VIL | | | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 746 |+| Input low voltage, I/O port | VIL | | | 0.15 | × VDD | 1.8V ≤ VDD < 4.5V | 746 |+| Input low voltage, Schmitt Trigger buffer | VIL | | | 0.2 | × VDD | 2.0V ≤ VDD ≤ 5.5V | 746 |+| Input low voltage, I2C levels | VIL | | | 0.3 | × VDD | 2.0V ≤ VDD ≤ 5.5V | 746 |+| Input low voltage, SMBus 2.0 | VIL | | | 0.8 | V | 2.7V ≤ VDD ≤ 5.5V | 746 |+| Input low voltage, SMBus 3.0 | VIL | | | 0.8 | V | 1.8V ≤ VDD ≤ 5.5V | 746 |+| Input low voltage, MCLR | VIL | | | 0.2 | × VDD | | 746 |+| Input high voltage, TTL buffer | VIH | 2 | | | V | 4.5V ≤ VDD ≤ 5.5V | 746 |+| Input high voltage, I/O port | VIH | 0.8 | | | V + 0.25 × VDD | 1.8V ≤ VDD < 4.5V | 746 |+| Input high voltage, Schmitt Trigger buffer | VIH | 0.8 | | | × VDD | 2.0V ≤ VDD ≤ 5.5V | 746 |+| Input high voltage, I2C levels | VIH | 0.7 | | | × VDD | | 746 |+| Input high voltage, SMBus 2.0 | VIH | 2.1 | | | V | 2.7V ≤ VDD ≤ 5.5V | 746 |+| Input high voltage, SMBus 3.0 | VIH | 1.35 | | | V | 1.8V ≤ VDD ≤ 5.5V | 746 |+| Input high voltage, MCLR | VIH | 0.7 | | | × VDD | | 746 |+| Input leakage current, I/O ports | IIL | -125 | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin high-impedance, 85°C | 746 |+| Input leakage current, MCLR | IIL | -200 | 50 | 200 | nA | VSS ≤ VPIN ≤ VDD, pin high-impedance, 85°C | 746 |+| Weak pull-up current | IPUR | 25 | 120 | 200 | µA | VDD = 3.0V, VPIN = VSS | 746 |+| Output low voltage, I/O ports | VOL | | | 0.6 | V | IOL = 10.0 mA, VDD = 3.0V | 746 |+| Output high voltage, I/O ports | VOH | 0.7 | | | V below VDD | IOH = 6.0 mA, VDD = 3.0V | 746 |+| Pin capacitance, all I/O pins | CIO | | 5 | 50 | pF | | 746 |+| Data EEPROM byte endurance | ED | 100 | | | k E/W | -40°C ≤ TA ≤ +85°C | 747 |+| Byte erase and write cycle time | TD_BEW | | 4 | 5 | ms | | 747 |+| Program Flash memory cell endurance | EP | 10 | | | k E/W | -40°C ≤ TA ≤ +85°C | 747 |+| Self-timed row erase or self-timed write time | TP_REW | | 2 | 2.5 | ms | | 747 |+| Maximum junction temperature | TJMAX | | | 150 | °C | | 748 |+| Secondary oscillator clock frequency | FSEC | 32.4 | 32.768 | 33.1 | kHz | Secondary oscillator | 750 |+| System clock frequency | FOSC | | | 64 | MHz | Notes 2, 3 | 750 |+| Thermal resistance junction to ambient | JA | | 27.5 | | °C/W | 28-pin QFN 6x6mm package | 748 |+| Thermal resistance junction to case | JC | | 24 | | °C/W | 28-pin QFN 6x6mm package | 748 | ## CAD (land: KiCad; 3D: generated from the datasheet) - Symbol: `PIC18F26K42T-I` - Footprint: `Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm`-- 3D model: QFN-28-EP(6x6), generated on the KiCad land (body 6 x 6 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)+- 3D model: QFN-28-EP(6x6), generated on the KiCad land (body 6 x 6 mm, terminals on the pads, 0.5 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP) - 3D model files: `pic18f26k42t-i-ml-etched.step` / `pic18f26k42t-i-ml-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic18f26k42t-i-ml.step` / `pic18f26k42t-i-ml.glb` are the bare package body. ## Provenance Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/PIC18(L)F26-27-45-46-47-55-56-57K42-Data-Sheet-40001919G.pdf) (841 pp, sha256 `dc561c5218c927f3`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/PIC18(L)F26-27-45-46-47-55-56-57K42-Data-Sheet-40001919G.pdf) (841 pp, sha256 `dc561c5218c927f3`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
docs/hero.png⋯ 1 unchanged line ⋯
package.json+44−43@@ -1,6 +1,6 @@ { "slug": "pic18f26k42t-i-ml",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), QFN-28-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,7 +53,7 @@ "mouser": "579-PIC18F26K42T-IML" }, "distributor_check": {- "checked_at": "2026-11-12T22:23:00Z",+ "checked_at": "2026-11-13T02:53:04Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "PIC18F26K42T-I/MLCT-ND",@@ -70,169 +70,169 @@ "number": "1", "name": "RA2", "type": "bidirectional",- "description": "PORTA I/O pin RA2 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability."+ "description": "PORTA bit 2 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions." }, { "number": "2", "name": "RA3", "type": "bidirectional",- "description": "PORTA I/O pin RA3 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability."+ "description": "PORTA bit 3 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions." }, { "number": "3", "name": "RA4", "type": "bidirectional",- "description": "PORTA I/O pin RA4 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability."+ "description": "PORTA bit 4 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions." }, { "number": "4", "name": "RA5", "type": "bidirectional",- "description": "PORTA I/O pin RA5 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability."+ "description": "PORTA bit 5 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions." }, { "number": "5", "name": "VSS", "type": "power_in",- "description": "Ground reference pin; all VDD and VSS pins must always be connected."+ "description": "Ground reference; all VDD and VSS pins must always be connected." }, { "number": "6", "name": "RA7", "type": "bidirectional",- "description": "PORTA I/O pin RA7 (also OSC1/CLKIN external oscillator input function) with programmable direction, open-drain, slew rate and weak pull-up control."+ "description": "PORTA bit 7 general-purpose I/O (shares OSC1/CLKIN function) with interrupt-on-change and PPS-mapped digital functions." }, { "number": "7", "name": "RA6", "type": "bidirectional",- "description": "PORTA I/O pin RA6 (also OSC2/CLKOUT function, FOSC/4 when CLKOUTEN is enabled) with programmable direction, open-drain, slew rate and weak pull-up control."+ "description": "PORTA bit 6 general-purpose I/O (shares OSC2/CLKOUT function) with interrupt-on-change and PPS-mapped digital functions." }, { "number": "8", "name": "RC0", "type": "bidirectional",- "description": "PORTC I/O pin RC0 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTC bit 0 general-purpose I/O with analog input via ANSELC, interrupt-on-change and PPS-mapped digital functions." }, { "number": "9", "name": "RC1", "type": "bidirectional",- "description": "PORTC I/O pin RC1 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTC bit 1 general-purpose I/O with analog input via ANSELC, interrupt-on-change and PPS-mapped digital functions." }, { "number": "10", "name": "RC2", "type": "bidirectional",- "description": "PORTC I/O pin RC2 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTC bit 2 general-purpose I/O with analog input via ANSELC, interrupt-on-change and PPS-mapped digital functions." }, { "number": "11", "name": "RC3", "type": "bidirectional",- "description": "PORTC I/O pin RC3 with I2C-specific pad option (RC3I2C register) and programmable direction, open-drain, slew rate and weak pull-up control."+ "description": "PORTC bit 3 general-purpose I/O with I2C-specific pad (RC3I2C control), interrupt-on-change and PPS-mapped digital functions." }, { "number": "12", "name": "RC4", "type": "bidirectional",- "description": "PORTC I/O pin RC4 with I2C-specific pad option (RC4I2C register) and programmable direction, open-drain, slew rate and weak pull-up control."+ "description": "PORTC bit 4 general-purpose I/O with I2C-specific pad (RC4I2C control), interrupt-on-change and PPS-mapped digital functions." }, { "number": "13", "name": "RC5", "type": "bidirectional",- "description": "PORTC I/O pin RC5 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTC bit 5 general-purpose I/O with analog input via ANSELC, interrupt-on-change and PPS-mapped digital functions." }, { "number": "14", "name": "RC6", "type": "bidirectional",- "description": "PORTC I/O pin RC6 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTC bit 6 general-purpose I/O with interrupt-on-change and PPS-mapped digital functions (e.g. UART1 TX output via RC6PPS)." }, { "number": "15", "name": "RC7", "type": "bidirectional",- "description": "PORTC I/O pin RC7 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTC bit 7 general-purpose I/O with interrupt-on-change and PPS-mapped digital functions (e.g. UART1 RX input via U1RXPPS)." }, { "number": "16", "name": "VSS", "type": "power_in",- "description": "Ground reference pin; all VDD and VSS pins must always be connected."+ "description": "Ground reference; all VDD and VSS pins must always be connected." }, { "number": "17", "name": "VDD", "type": "power_in",- "description": "Positive supply, 2.3V to 5.5V for PIC18F26K42; a 0.1 uF decoupling capacitor is recommended on every VDD/VSS pair."+ "description": "Positive supply, 2.3V to 5.5V for PIC18F26K42; requires a 0.1 uF decoupling capacitor and must always be connected." }, { "number": "18", "name": "RB0", "type": "bidirectional",- "description": "PORTB I/O pin RB0 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTB bit 0 general-purpose I/O with analog input via ANSELB, interrupt-on-change and PPS-mapped digital functions." }, { "number": "19", "name": "RB1", "type": "bidirectional",- "description": "PORTB I/O pin RB1 with I2C-specific pad option (RB1I2C register) and programmable direction, open-drain, slew rate and weak pull-up control."+ "description": "PORTB bit 1 general-purpose I/O with I2C-specific pad (RB1I2C control), interrupt-on-change and PPS-mapped digital functions." }, { "number": "20", "name": "RB2", "type": "bidirectional",- "description": "PORTB I/O pin RB2 with I2C-specific pad option (RB2I2C register) and programmable direction, open-drain, slew rate and weak pull-up control."+ "description": "PORTB bit 2 general-purpose I/O with I2C-specific pad (RB2I2C control), interrupt-on-change and PPS-mapped digital functions." }, { "number": "21", "name": "RB3", "type": "bidirectional",- "description": "PORTB I/O pin RB3 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTB bit 3 general-purpose I/O with analog input via ANSELB, interrupt-on-change and PPS-mapped digital functions." }, { "number": "22", "name": "RB4", "type": "bidirectional",- "description": "PORTB I/O pin RB4 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTB bit 4 general-purpose I/O with analog input via ANSELB, interrupt-on-change and PPS-mapped digital functions." }, { "number": "23", "name": "RB5", "type": "bidirectional",- "description": "PORTB I/O pin RB5 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTB bit 5 general-purpose I/O with analog input via ANSELB, interrupt-on-change and PPS-mapped digital functions." }, { "number": "24", "name": "RB6/ICSPCLK", "type": "bidirectional",- "description": "PORTB I/O pin RB6 that is also the ICSP programming and debugging clock input; pull-ups, series diodes and capacitors are not recommended on it."+ "description": "PORTB bit 6 I/O, also the In-Circuit Serial Programming clock input; reads '1' in Debug mode." }, { "number": "25", "name": "RB7/ICSPDAT", "type": "bidirectional",- "description": "PORTB I/O pin RB7 that is also the ICSP bidirectional serial data pin for programming and debugging; pull-ups, series diodes and capacitors are not recommended on it."+ "description": "PORTB bit 7 I/O, also the bidirectional In-Circuit Serial Programming data pin; reads '1' in Debug mode." }, { "number": "26", "name": "RE3/MCLR/VPP", "type": "input",- "description": "Input-only pin RE3 that serves as active-low Master Clear reset (internal weak pull-up to VDD when MCLR is enabled) and as programming voltage input VPP."+ "description": "Input-only pin RE3 that functions as Master Clear (Reset) input when MCLR is enabled (always when LVP = 1) and as programming voltage input; has an internal weak pull-up when MCLR is enabled." }, { "number": "27", "name": "RA0", "type": "bidirectional",- "description": "PORTA I/O pin RA0 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability."+ "description": "PORTA bit 0 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions." }, { "number": "28", "name": "RA1", "type": "bidirectional",- "description": "PORTA I/O pin RA1 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability."+ "description": "PORTA bit 1 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions." }, { "number": "29",@@ -252,12 +252,13 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The exposed pad has no printed pin number on the pinout diagram; it is listed as 'EP' and typed pass; The 28-pin QFN package drawing (ML) is not in the supplied pages (only the UQFN MX drawing and marki; The OSC1/CLKIN and OSC2/CLKOUT functions of RA7 and RA6 are inferred from the oscillator section tex",+ "extractor flagged: The 28-pin QFN diagram shows an exposed bottom pad with no pin number printed. Note 2 says to connec; The text states no electrical limits per pin. Pin descriptions use only the general port, PPS and I2; The MPN suffix 'T-I/ML' is read as tape-and-reel, industrial temperature, QFN. The datasheet marks t",+ "exposed pad 29 added from the footprint", "vision extraction: provenance cannot be text-verified; needs consensus" ], "pages_sent": 91,- "cost_usd": 0.5108,- "at": "2026-11-12T22:22:46"+ "cost_usd": 0.4943,+ "at": "2026-11-13T02:52:49" }, "datasheet": { "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/PIC18(L)F26-27-45-46-47-55-56-57K42-Data-Sheet-40001919G.pdf",@@ -269,7 +270,7 @@ "model_3d_generated": { "generator": "factory/gen_pkg3d.py", "family": "QFN",- "height_mm": 0.55,+ "height_mm": 0.5, "height_basis": "datasheet A, nominal", "standoff_mm": 0.0 },@@ -295,13 +296,13 @@ "extents_mm": [ 6.02, 6.02,- 0.55+ 0.5 ], "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "83d054965d0b88068c7c7f93ce0d6b1ffe84e3594dee81263a044330a57bab66",- "checked": "2026-11-12",+ "sha256": "5c01246b2f80028272af936260d957902303e0ad5aae31823b825b66fa940193",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -314,18 +315,18 @@ "extents_mm": [ 6.02, 6.02,- 0.55+ 0.5 ], "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "78f045d68dfbb7652df1b18821997bce14ed0d37dca3e7252544fb4a08f169c9",- "checked": "2026-11-12",+ "sha256": "b82a455b95b4ad8275d87c93b0cf01291f24e00f65b79b80a90a93c05b6343a0",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": {- "package_code": "MX (28-Lead UQFN 6x6x0.5 mm, C04-0209)",+ "package_code": "MX (28-Lead UQFN 6x6x0.5 mm, Drawing C04-0209)", "source_page": 813, "D": { "nom_mm": 6.0,@@ -349,9 +350,9 @@ ] }, "A": {- "nom_mm": 0.55,+ "nom_mm": 0.5, "range_mm": [- 0.5,+ 0.4, 0.6 ] },
page.json+47−44@@ -4,7 +4,7 @@ "slug": "pic18f26k42t-i-ml", "title": "PIC18F26K42T-I/ML", "brief": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), QFN-28-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "579-PIC18F26K42T-IML" }, "distributor_check": {- "checked_at": "2026-11-12T22:23:00Z",+ "checked_at": "2026-11-13T02:53:04Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "PIC18F26K42T-I/MLCT-ND",@@ -53,169 +53,169 @@ "number": "1", "name": "RA2", "type": "bidirectional",- "description": "PORTA I/O pin RA2 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability."+ "description": "PORTA bit 2 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions." }, { "number": "2", "name": "RA3", "type": "bidirectional",- "description": "PORTA I/O pin RA3 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability."+ "description": "PORTA bit 3 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions." }, { "number": "3", "name": "RA4", "type": "bidirectional",- "description": "PORTA I/O pin RA4 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability."+ "description": "PORTA bit 4 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions." }, { "number": "4", "name": "RA5", "type": "bidirectional",- "description": "PORTA I/O pin RA5 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability."+ "description": "PORTA bit 5 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions." }, { "number": "5", "name": "VSS", "type": "power_in",- "description": "Ground reference pin; all VDD and VSS pins must always be connected."+ "description": "Ground reference; all VDD and VSS pins must always be connected." }, { "number": "6", "name": "RA7", "type": "bidirectional",- "description": "PORTA I/O pin RA7 (also OSC1/CLKIN external oscillator input function) with programmable direction, open-drain, slew rate and weak pull-up control."+ "description": "PORTA bit 7 general-purpose I/O (shares OSC1/CLKIN function) with interrupt-on-change and PPS-mapped digital functions." }, { "number": "7", "name": "RA6", "type": "bidirectional",- "description": "PORTA I/O pin RA6 (also OSC2/CLKOUT function, FOSC/4 when CLKOUTEN is enabled) with programmable direction, open-drain, slew rate and weak pull-up control."+ "description": "PORTA bit 6 general-purpose I/O (shares OSC2/CLKOUT function) with interrupt-on-change and PPS-mapped digital functions." }, { "number": "8", "name": "RC0", "type": "bidirectional",- "description": "PORTC I/O pin RC0 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTC bit 0 general-purpose I/O with analog input via ANSELC, interrupt-on-change and PPS-mapped digital functions." }, { "number": "9", "name": "RC1", "type": "bidirectional",- "description": "PORTC I/O pin RC1 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTC bit 1 general-purpose I/O with analog input via ANSELC, interrupt-on-change and PPS-mapped digital functions." }, { "number": "10", "name": "RC2", "type": "bidirectional",- "description": "PORTC I/O pin RC2 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTC bit 2 general-purpose I/O with analog input via ANSELC, interrupt-on-change and PPS-mapped digital functions." }, { "number": "11", "name": "RC3", "type": "bidirectional",- "description": "PORTC I/O pin RC3 with I2C-specific pad option (RC3I2C register) and programmable direction, open-drain, slew rate and weak pull-up control."+ "description": "PORTC bit 3 general-purpose I/O with I2C-specific pad (RC3I2C control), interrupt-on-change and PPS-mapped digital functions." }, { "number": "12", "name": "RC4", "type": "bidirectional",- "description": "PORTC I/O pin RC4 with I2C-specific pad option (RC4I2C register) and programmable direction, open-drain, slew rate and weak pull-up control."+ "description": "PORTC bit 4 general-purpose I/O with I2C-specific pad (RC4I2C control), interrupt-on-change and PPS-mapped digital functions." }, { "number": "13", "name": "RC5", "type": "bidirectional",- "description": "PORTC I/O pin RC5 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTC bit 5 general-purpose I/O with analog input via ANSELC, interrupt-on-change and PPS-mapped digital functions." }, { "number": "14", "name": "RC6", "type": "bidirectional",- "description": "PORTC I/O pin RC6 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTC bit 6 general-purpose I/O with interrupt-on-change and PPS-mapped digital functions (e.g. UART1 TX output via RC6PPS)." }, { "number": "15", "name": "RC7", "type": "bidirectional",- "description": "PORTC I/O pin RC7 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTC bit 7 general-purpose I/O with interrupt-on-change and PPS-mapped digital functions (e.g. UART1 RX input via U1RXPPS)." }, { "number": "16", "name": "VSS", "type": "power_in",- "description": "Ground reference pin; all VDD and VSS pins must always be connected."+ "description": "Ground reference; all VDD and VSS pins must always be connected." }, { "number": "17", "name": "VDD", "type": "power_in",- "description": "Positive supply, 2.3V to 5.5V for PIC18F26K42; a 0.1 uF decoupling capacitor is recommended on every VDD/VSS pair."+ "description": "Positive supply, 2.3V to 5.5V for PIC18F26K42; requires a 0.1 uF decoupling capacitor and must always be connected." }, { "number": "18", "name": "RB0", "type": "bidirectional",- "description": "PORTB I/O pin RB0 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTB bit 0 general-purpose I/O with analog input via ANSELB, interrupt-on-change and PPS-mapped digital functions." }, { "number": "19", "name": "RB1", "type": "bidirectional",- "description": "PORTB I/O pin RB1 with I2C-specific pad option (RB1I2C register) and programmable direction, open-drain, slew rate and weak pull-up control."+ "description": "PORTB bit 1 general-purpose I/O with I2C-specific pad (RB1I2C control), interrupt-on-change and PPS-mapped digital functions." }, { "number": "20", "name": "RB2", "type": "bidirectional",- "description": "PORTB I/O pin RB2 with I2C-specific pad option (RB2I2C register) and programmable direction, open-drain, slew rate and weak pull-up control."+ "description": "PORTB bit 2 general-purpose I/O with I2C-specific pad (RB2I2C control), interrupt-on-change and PPS-mapped digital functions." }, { "number": "21", "name": "RB3", "type": "bidirectional",- "description": "PORTB I/O pin RB3 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTB bit 3 general-purpose I/O with analog input via ANSELB, interrupt-on-change and PPS-mapped digital functions." }, { "number": "22", "name": "RB4", "type": "bidirectional",- "description": "PORTB I/O pin RB4 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTB bit 4 general-purpose I/O with analog input via ANSELB, interrupt-on-change and PPS-mapped digital functions." }, { "number": "23", "name": "RB5", "type": "bidirectional",- "description": "PORTB I/O pin RB5 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus interrupt-on-change capability."+ "description": "PORTB bit 5 general-purpose I/O with analog input via ANSELB, interrupt-on-change and PPS-mapped digital functions." }, { "number": "24", "name": "RB6/ICSPCLK", "type": "bidirectional",- "description": "PORTB I/O pin RB6 that is also the ICSP programming and debugging clock input; pull-ups, series diodes and capacitors are not recommended on it."+ "description": "PORTB bit 6 I/O, also the In-Circuit Serial Programming clock input; reads '1' in Debug mode." }, { "number": "25", "name": "RB7/ICSPDAT", "type": "bidirectional",- "description": "PORTB I/O pin RB7 that is also the ICSP bidirectional serial data pin for programming and debugging; pull-ups, series diodes and capacitors are not recommended on it."+ "description": "PORTB bit 7 I/O, also the bidirectional In-Circuit Serial Programming data pin; reads '1' in Debug mode." }, { "number": "26", "name": "RE3/MCLR/VPP", "type": "input",- "description": "Input-only pin RE3 that serves as active-low Master Clear reset (internal weak pull-up to VDD when MCLR is enabled) and as programming voltage input VPP."+ "description": "Input-only pin RE3 that functions as Master Clear (Reset) input when MCLR is enabled (always when LVP = 1) and as programming voltage input; has an internal weak pull-up when MCLR is enabled." }, { "number": "27", "name": "RA0", "type": "bidirectional",- "description": "PORTA I/O pin RA0 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability."+ "description": "PORTA bit 0 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions." }, { "number": "28", "name": "RA1", "type": "bidirectional",- "description": "PORTA I/O pin RA1 with individually programmable direction, open-drain, slew rate and weak pull-up control, plus analog input and interrupt-on-change capability."+ "description": "PORTA bit 1 general-purpose I/O with analog input via ANSELA, interrupt-on-change and PPS-mapped digital functions." }, { "number": "29",@@ -235,12 +235,13 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The exposed pad has no printed pin number on the pinout diagram; it is listed as 'EP' and typed pass; The 28-pin QFN package drawing (ML) is not in the supplied pages (only the UQFN MX drawing and marki; The OSC1/CLKIN and OSC2/CLKOUT functions of RA7 and RA6 are inferred from the oscillator section tex",+ "extractor flagged: The 28-pin QFN diagram shows an exposed bottom pad with no pin number printed. Note 2 says to connec; The text states no electrical limits per pin. Pin descriptions use only the general port, PPS and I2; The MPN suffix 'T-I/ML' is read as tape-and-reel, industrial temperature, QFN. The datasheet marks t",+ "exposed pad 29 added from the footprint", "vision extraction: provenance cannot be text-verified; needs consensus" ], "pages_sent": 91,- "cost_usd": 0.5108,- "at": "2026-11-12T22:22:46"+ "cost_usd": 0.4943,+ "at": "2026-11-13T02:52:49" }, "datasheet": { "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/PIC18(L)F26-27-45-46-47-55-56-57K42-Data-Sheet-40001919G.pdf",@@ -252,7 +253,7 @@ "model_3d_generated": { "generator": "factory/gen_pkg3d.py", "family": "QFN",- "height_mm": 0.55,+ "height_mm": 0.5, "height_basis": "datasheet A, nominal", "standoff_mm": 0 },@@ -278,13 +279,13 @@ "extents_mm": [ 6.02, 6.02,- 0.55+ 0.5 ], "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "83d054965d0b88068c7c7f93ce0d6b1ffe84e3594dee81263a044330a57bab66",- "checked": "2026-11-12",+ "sha256": "5c01246b2f80028272af936260d957902303e0ad5aae31823b825b66fa940193",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -297,18 +298,18 @@ "extents_mm": [ 6.02, 6.02,- 0.55+ 0.5 ], "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "78f045d68dfbb7652df1b18821997bce14ed0d37dca3e7252544fb4a08f169c9",- "checked": "2026-11-12",+ "sha256": "b82a455b95b4ad8275d87c93b0cf01291f24e00f65b79b80a90a93c05b6343a0",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": {- "package_code": "MX (28-Lead UQFN 6x6x0.5 mm, C04-0209)",+ "package_code": "MX (28-Lead UQFN 6x6x0.5 mm, Drawing C04-0209)", "source_page": 813, "D": { "nom_mm": 6,@@ -332,9 +333,9 @@ ] }, "A": {- "nom_mm": 0.55,+ "nom_mm": 0.5, "range_mm": [- 0.5,+ 0.4, 0.6 ] },@@ -1122,5 +1123,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), QFN-28-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }
pic18f26k42t-i-ml-hero.glb⋯ 1 unchanged line ⋯
pic18f26k42t-i-ml-hero.overlay.json+711−716@@ -1,718 +1,713 @@ {- "spec": "adom-hero 1.4",- "mpn": "PIC18F26K42T-I",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {- "pad_outlines": {- "material": "Footprint pads - teal dashed outlines - 50 percent opacity",- "rgba": [- 0.0,- 0.902,- 0.863,- 0.5- ],- "pads": 29,- "span_mm": 10.775,- "dash_mm": 0.2694,- "gap_mm": 0.1616,- "pad_stroke_mm": 0.0646- },- "silkscreen": {- "material": "Silkscreen reference lines - 30 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.3- ],- "footprint_items": 9,- "pin1": {- "source": "footprint silkscreen",- "pad": "1"- }- },- "signal_names": {- "material": "Signal names - 50 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.5- ],- "font": "DejaVu Sans Mono",- "labels": 28,- "sides": "top + mirrored underside (single-sided)",- "omitted": null,- "fallback_to_pad_number": 0- }- },- "align": {- "ok": true,- "board_underside": true,- "electrical_pads_without_contact": [],- "mounting_pads_left_out": [],- "centre_offset_mm": 0.0,- "over_pads": false,- "tolerance_mm": 0.54,- "orientation_flipped": false,- "contacts_bbox_mm": [- -3.01,- 3.01,- -3.01,- 3.01+ "spec": "adom-hero 1.4",+ "mpn": "PIC18F26K42T-I/ML",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 29,+ "span_mm": 10.775,+ "dash_mm": 0.2694,+ "gap_mm": 0.1616,+ "pad_stroke_mm": 0.0646+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 9,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 28,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.54,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.01,+ 3.01,+ -3.01,+ 3.01+ ],+ "pads_bbox_mm": [+ -3.375,+ 3.375,+ -3.375,+ 3.375+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "pic18f26k42t-i-ml-etched.glb",+ "glb_sha256": "cce426c06357e3992080a7d8d6dd4387dd3049f61df857f8e89a79cf6f006e87",+ "footprint": "pic18f26k42t-i-ml.kicad_mod",+ "footprint_sha256": "d1fae1483a64403f441325e79ad8229c98594aec1689ef1ec634af25644c1049",+ "pins": "page.json component.pins",+ "pins_sha256": "0f4e14cf4bcd36ed8506b46575ebb15f325904c75a1142980f7c61812f03a94a"+ },+ "generator": "adom-wiki 1.8.24 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "RA2",+ "x": -4.07,+ "y": -1.95,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "2",+ "text": "RA3",+ "x": -3.475,+ "y": -1.3,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "RA4",+ "x": -3.475,+ "y": -0.65,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "RA5",+ "x": -3.475,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "5",+ "text": "VSS",+ "x": -3.475,+ "y": 0.65,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "6",+ "text": "RA7",+ "x": -3.475,+ "y": 1.3,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "7",+ "text": "RA6",+ "x": -3.475,+ "y": 1.95,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "8",+ "text": "RC0",+ "x": -1.95,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "9",+ "text": "RC1",+ "x": -1.3,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "10",+ "text": "RC2",+ "x": -0.65,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "11",+ "text": "RC3",+ "x": 0.0,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "12",+ "text": "RC4",+ "x": 0.65,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "13",+ "text": "RC5",+ "x": 1.3,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "14",+ "text": "RC6",+ "x": 1.95,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "15",+ "text": "RC7",+ "x": 3.475,+ "y": 1.95,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "16",+ "text": "VSS",+ "x": 3.475,+ "y": 1.3,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "17",+ "text": "VDD",+ "x": 3.475,+ "y": 0.65,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "18",+ "text": "RB0",+ "x": 3.475,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "19",+ "text": "RB1",+ "x": 3.475,+ "y": -0.65,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "20",+ "text": "RB2",+ "x": 3.475,+ "y": -1.3,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "21",+ "text": "RB3",+ "x": 3.475,+ "y": -1.95,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "22",+ "text": "RB4",+ "x": 1.95,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "23",+ "text": "RB5",+ "x": 1.3,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "24",+ "text": "RB6/ICSPCLK",+ "x": 0.65,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "25",+ "text": "RB7/ICSPDAT",+ "x": 0.0,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "26",+ "text": "RE3/MCLR/VPP",+ "x": -0.65,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "27",+ "text": "RA0",+ "x": -1.3,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.325+ },+ {+ "pad": "28",+ "text": "RA1",+ "x": -1.95,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.325+ } ],- "pads_bbox_mm": [- -3.375,- 3.375,- -3.375,- 3.375- ],- "seating_z_mm": 0.0- },- "sources": {- "glb": "pic18f26k42t-i-ml-etched.glb",- "glb_sha256": "146a290717260b34018566f1f15d11bb352335dd141ad4de7fc38abe4eccdff6",- "footprint": "pic18f26k42t-i-ml.kicad_mod",- "footprint_sha256": "d1fae1483a64403f441325e79ad8229c98594aec1689ef1ec634af25644c1049",- "pins": "page.json component.pins",- "pins_sha256": "0f4e14cf4bcd36ed8506b46575ebb15f325904c75a1142980f7c61812f03a94a"- },- "generator": "factory/hero_glb.py",- "labels": [- {- "pad": "1",- "text": "RA2",- "x": -4.07,- "y": -1.95,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "2",- "text": "RA3",- "x": -3.475,- "y": -1.3,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "3",- "text": "RA4",- "x": -3.475,- "y": -0.65,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "4",- "text": "RA5",- "x": -3.475,- "y": 0.0,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "5",- "text": "VSS",- "x": -3.475,- "y": 0.65,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "6",- "text": "RA7",- "x": -3.475,- "y": 1.3,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "7",- "text": "RA6",- "x": -3.475,- "y": 1.95,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "8",- "text": "RC0",- "x": -1.95,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.325- },- {- "pad": "9",- "text": "RC1",- "x": -1.3,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.325- },- {- "pad": "10",- "text": "RC2",- "x": -0.65,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.325- },- {- "pad": "11",- "text": "RC3",- "x": 0.0,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.325- },- {- "pad": "12",- "text": "RC4",- "x": 0.65,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.325- },- {- "pad": "13",- "text": "RC5",- "x": 1.3,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.325- },- {- "pad": "14",- "text": "RC6",- "x": 1.95,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.325- },- {- "pad": "15",- "text": "RC7",- "x": 3.475,- "y": 1.95,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "16",- "text": "VSS",- "x": 3.475,- "y": 1.3,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "17",- "text": "VDD",- "x": 3.475,- "y": 0.65,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "18",- "text": "RB0",- "x": 3.475,- "y": 0.0,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "19",- "text": "RB1",- "x": 3.475,- "y": -0.65,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "20",- "text": "RB2",- "x": 3.475,- "y": -1.3,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "21",- "text": "RB3",- "x": 3.475,- "y": -1.95,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "22",- "text": "RB4",- "x": 1.95,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.325- },- {- "pad": "23",- "text": "RB5",- "x": 1.3,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.325- },- {- "pad": "24",- "text": "RB6/ICSPCLK",- "x": 0.65,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.325- },- {- "pad": "25",- "text": "RB7/ICSPDAT",- "x": 0.0,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.325- },- {- "pad": "26",- "text": "RE3/MCLR/VPP",- "x": -0.65,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.325- },- {- "pad": "27",- "text": "RA0",- "x": -1.3,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.325- },- {- "pad": "28",- "text": "RA1",- "x": -1.95,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.325- }- ],- "pads": [- {- "number": "1",- "shape": "roundrect",- "center_mm": [- -2.9875,- -1.95- ],- "size_mm": [- 0.775,- 0.3- ],- "rot": 0.0- },- {- "number": "2",- "shape": "roundrect",- "center_mm": [- -2.9875,- -1.3- ],- "size_mm": [- 0.775,- 0.3- ],- "rot": 0.0- },- {- "number": "3",- "shape": "roundrect",- "center_mm": [- -2.9875,- -0.65- ],- "size_mm": [- 0.775,- 0.3- ],- "rot": 0.0- },- {- "number": "4",- "shape": "roundrect",- "center_mm": [- -2.9875,- 0.0- ],- "size_mm": [- 0.775,- 0.3- ],- "rot": 0.0- },- {- "number": "5",- "shape": "roundrect",- "center_mm": [- -2.9875,- 0.65- ],- "size_mm": [- 0.775,- 0.3- ],- "rot": 0.0- },- {- "number": "6",- "shape": "roundrect",- "center_mm": [- -2.9875,- 1.3- ],- "size_mm": [- 0.775,- 0.3- ],- "rot": 0.0- },- {- "number": "7",- "shape": "roundrect",- "center_mm": [- -2.9875,- 1.95- ],- "size_mm": [- 0.775,- 0.3- ],- "rot": 0.0- },- {- "number": "8",- "shape": "roundrect",- "center_mm": [- -1.95,- 2.9875- ],- "size_mm": [- 0.3,- 0.775- ],- "rot": 0.0- },- {- "number": "9",- "shape": "roundrect",- "center_mm": [- -1.3,- 2.9875- ],- "size_mm": [- 0.3,- 0.775- ],- "rot": 0.0- },- {- "number": "10",- "shape": "roundrect",- "center_mm": [- -0.65,- 2.9875- ],- "size_mm": [- 0.3,- 0.775- ],- "rot": 0.0- },- {- "number": "11",- "shape": "roundrect",- "center_mm": [- 0.0,- 2.9875- ],- "size_mm": [- 0.3,- 0.775- ],- "rot": 0.0- },- {- "number": "12",- "shape": "roundrect",- "center_mm": [- 0.65,- 2.9875- ],- "size_mm": [- 0.3,- 0.775- ],- "rot": 0.0- },- {- "number": "13",- "shape": "roundrect",- "center_mm": [- 1.3,- 2.9875- ],- "size_mm": [- 0.3,- 0.775- ],- "rot": 0.0- },- {- "number": "14",- "shape": "roundrect",- "center_mm": [- 1.95,- 2.9875- ],- "size_mm": [- 0.3,- 0.775- ],- "rot": 0.0- },- {- "number": "15",- "shape": "roundrect",- "center_mm": [- 2.9875,- 1.95- ],- "size_mm": [- 0.775,- 0.3- ],- "rot": 0.0- },- {- "number": "16",- "shape": "roundrect",- "center_mm": [- 2.9875,- 1.3- ],- "size_mm": [- 0.775,- 0.3- ],- "rot": 0.0- },- {- "number": "17",- "shape": "roundrect",- "center_mm": [- 2.9875,- 0.65- ],- "size_mm": [- 0.775,- 0.3- ],- "rot": 0.0- },- {- "number": "18",- "shape": "roundrect",- "center_mm": [- 2.9875,- 0.0- ],- "size_mm": [- 0.775,- 0.3- ],- "rot": 0.0- },- {- "number": "19",- "shape": "roundrect",- "center_mm": [- 2.9875,- -0.65- ],- "size_mm": [- 0.775,- 0.3- ],- "rot": 0.0- },- {- "number": "20",- "shape": "roundrect",- "center_mm": [- 2.9875,- -1.3- ],- "size_mm": [- 0.775,- 0.3- ],- "rot": 0.0- },- {- "number": "21",- "shape": "roundrect",- "center_mm": [- 2.9875,- -1.95- ],- "size_mm": [- 0.775,- 0.3- ],- "rot": 0.0- },- {- "number": "22",- "shape": "roundrect",- "center_mm": [- 1.95,- -2.9875- ],- "size_mm": [- 0.3,- 0.775- ],- "rot": 0.0- },- {- "number": "23",- "shape": "roundrect",- "center_mm": [- 1.3,- -2.9875- ],- "size_mm": [- 0.3,- 0.775- ],- "rot": 0.0- },- {- "number": "24",- "shape": "roundrect",- "center_mm": [- 0.65,- -2.9875- ],- "size_mm": [- 0.3,- 0.775- ],- "rot": 0.0- },- {- "number": "25",- "shape": "roundrect",- "center_mm": [- 0.0,- -2.9875- ],- "size_mm": [- 0.3,- 0.775- ],- "rot": 0.0- },- {- "number": "26",- "shape": "roundrect",- "center_mm": [- -0.65,- -2.9875- ],- "size_mm": [- 0.3,- 0.775- ],- "rot": 0.0- },- {- "number": "27",- "shape": "roundrect",- "center_mm": [- -1.3,- -2.9875- ],- "size_mm": [- 0.3,- 0.775- ],- "rot": 0.0- },- {- "number": "28",- "shape": "roundrect",- "center_mm": [- -1.95,- -2.9875- ],- "size_mm": [- 0.3,- 0.775- ],- "rot": 0.0- },- {- "number": "29",- "shape": "rect",- "center_mm": [- 0.0,- 0.0- ],- "size_mm": [- 4.8,- 4.8- ],- "rot": 0.0- }- ]-}+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.9875,+ -1.95+ ],+ "size_mm": [+ 0.775,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.9875,+ -1.3+ ],+ "size_mm": [+ 0.775,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.9875,+ -0.65+ ],+ "size_mm": [+ 0.775,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.9875,+ 0.0+ ],+ "size_mm": [+ 0.775,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -2.9875,+ 0.65+ ],+ "size_mm": [+ 0.775,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -2.9875,+ 1.3+ ],+ "size_mm": [+ 0.775,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -2.9875,+ 1.95+ ],+ "size_mm": [+ 0.775,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ -1.95,+ 2.9875+ ],+ "size_mm": [+ 0.3,+ 0.775+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ -1.3,+ 2.9875+ ],+ "size_mm": [+ 0.3,+ 0.775+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ -0.65,+ 2.9875+ ],+ "size_mm": [+ 0.3,+ 0.775+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ 0.0,+ 2.9875+ ],+ "size_mm": [+ 0.3,+ 0.775+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ 0.65,+ 2.9875+ ],+ "size_mm": [+ 0.3,+ 0.775+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ 1.3,+ 2.9875+ ],+ "size_mm": [+ 0.3,+ 0.775+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ 1.95,+ 2.9875+ ],+ "size_mm": [+ 0.3,+ 0.775+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ 2.9875,+ 1.95+ ],+ "size_mm": [+ 0.775,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ 2.9875,+ 1.3+ ],+ "size_mm": [+ 0.775,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "roundrect",+ "center_mm": [+ 2.9875,+ 0.65+ ],+ "size_mm": [+ 0.775,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "18",+ "shape": "roundrect",+ "center_mm": [+ 2.9875,+ 0.0+ ],+ "size_mm": [+ 0.775,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "19",+ "shape": "roundrect",+ "center_mm": [+ 2.9875,+ -0.65+ ],+ "size_mm": [+ 0.775,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "20",+ "shape": "roundrect",+ "center_mm": [+ 2.9875,+ -1.3+ ],+ "size_mm": [+ 0.775,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "21",+ "shape": "roundrect",+ "center_mm": [+ 2.9875,+ -1.95+ ],+ "size_mm": [+ 0.775,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "22",+ "shape": "roundrect",+ "center_mm": [+ 1.95,+ -2.9875+ ],+ "size_mm": [+ 0.3,+ 0.775+ ],+ "rot": 0.0+ },+ {+ "number": "23",+ "shape": "roundrect",+ "center_mm": [+ 1.3,+ -2.9875+ ],+ "size_mm": [+ 0.3,+ 0.775+ ],+ "rot": 0.0+ },+ {+ "number": "24",+ "shape": "roundrect",+ "center_mm": [+ 0.65,+ -2.9875+ ],+ "size_mm": [+ 0.3,+ 0.775+ ],+ "rot": 0.0+ },+ {+ "number": "25",+ "shape": "roundrect",+ "center_mm": [+ 0.0,+ -2.9875+ ],+ "size_mm": [+ 0.3,+ 0.775+ ],+ "rot": 0.0+ },+ {+ "number": "26",+ "shape": "roundrect",+ "center_mm": [+ -0.65,+ -2.9875+ ],+ "size_mm": [+ 0.3,+ 0.775+ ],+ "rot": 0.0+ },+ {+ "number": "27",+ "shape": "roundrect",+ "center_mm": [+ -1.3,+ -2.9875+ ],+ "size_mm": [+ 0.3,+ 0.775+ ],+ "rot": 0.0+ },+ {+ "number": "28",+ "shape": "roundrect",+ "center_mm": [+ -1.95,+ -2.9875+ ],+ "size_mm": [+ 0.3,+ 0.775+ ],+ "rot": 0.0+ },+ {+ "number": "29",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 4.8,+ 4.8+ ],+ "rot": 0.0+ }+ ]+}
pic18f26k42t-i-ml.glb⋯ 1 unchanged line ⋯
pic18f26k42t-i-ml.step+65−65@@ -1,7 +1,7 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-11-12T22:22:50',('Author'),(+FILE_NAME('Open CASCADE Shape Model','2026-11-13T02:52:54',('Author'),( 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9' ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));@@ -37,7 +37,7 @@ DATA; #22 = VERTEX_POINT('',#23); #23 = CARTESIAN_POINT('',(-3.,-3.,2.E-02)); #24 = VERTEX_POINT('',#25);-#25 = CARTESIAN_POINT('',(-3.,-3.,0.484));+#25 = CARTESIAN_POINT('',(-3.,-3.,0.44)); #26 = SURFACE_CURVE('',#27,(#31,#43),.PCURVE_S1.); #27 = LINE('',#28,#29); #28 = CARTESIAN_POINT('',(-3.,-3.,2.E-02));@@ -106,7 +106,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #83 = ORIENTED_EDGE('',*,*,#84,.T.); #84 = EDGE_CURVE('',#57,#85,#87,.T.); #85 = VERTEX_POINT('',#86);-#86 = CARTESIAN_POINT('',(-3.,3.,0.484));+#86 = CARTESIAN_POINT('',(-3.,3.,0.44)); #87 = SURFACE_CURVE('',#88,(#92,#99),.PCURVE_S1.); #88 = LINE('',#89,#90); #89 = CARTESIAN_POINT('',(-3.,3.,2.E-02));@@ -139,13 +139,13 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #112 = EDGE_CURVE('',#24,#85,#113,.T.); #113 = SURFACE_CURVE('',#114,(#118,#125),.PCURVE_S1.); #114 = LINE('',#115,#116);-#115 = CARTESIAN_POINT('',(-3.,-3.,0.484));+#115 = CARTESIAN_POINT('',(-3.,-3.,0.44)); #116 = VECTOR('',#117,1.); #117 = DIRECTION('',(0.,1.,0.)); #118 = PCURVE('',#32,#119); #119 = DEFINITIONAL_REPRESENTATION('',(#120),#124); #120 = LINE('',#121,#122);-#121 = CARTESIAN_POINT('',(0.464,0.));+#121 = CARTESIAN_POINT('',(0.42,0.)); #122 = VECTOR('',#123,1.); #123 = DIRECTION('',(0.,-1.)); #124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -154,12 +154,12 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #125 = PCURVE('',#126,#131); #126 = PLANE('',#127); #127 = AXIS2_PLACEMENT_3D('',#128,#129,#130);-#128 = CARTESIAN_POINT('',(-2.967,-3.,0.517));+#128 = CARTESIAN_POINT('',(-2.97,-3.,0.47)); #129 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); #130 = DIRECTION('',(0.,1.,0.)); #131 = DEFINITIONAL_REPRESENTATION('',(#132),#136); #132 = LINE('',#133,#134);-#133 = CARTESIAN_POINT('',(0.,-4.666904755831E-02));+#133 = CARTESIAN_POINT('',(0.,-4.242640687119E-02)); #134 = VECTOR('',#135,1.); #135 = DIRECTION('',(1.,0.)); #136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -173,7 +173,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #142 = VERTEX_POINT('',#143); #143 = CARTESIAN_POINT('',(3.,-3.,2.E-02)); #144 = VERTEX_POINT('',#145);-#145 = CARTESIAN_POINT('',(3.,-3.,0.484));+#145 = CARTESIAN_POINT('',(3.,-3.,0.44)); #146 = SURFACE_CURVE('',#147,(#151,#158),.PCURVE_S1.); #147 = LINE('',#148,#149); #148 = CARTESIAN_POINT('',(3.,-3.,2.E-02));@@ -232,13 +232,13 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #193 = EDGE_CURVE('',#24,#144,#194,.T.); #194 = SURFACE_CURVE('',#195,(#199,#206),.PCURVE_S1.); #195 = LINE('',#196,#197);-#196 = CARTESIAN_POINT('',(-3.,-3.,0.484));+#196 = CARTESIAN_POINT('',(-3.,-3.,0.44)); #197 = VECTOR('',#198,1.); #198 = DIRECTION('',(1.,0.,0.)); #199 = PCURVE('',#44,#200); #200 = DEFINITIONAL_REPRESENTATION('',(#201),#205); #201 = LINE('',#202,#203);-#202 = CARTESIAN_POINT('',(0.464,0.));+#202 = CARTESIAN_POINT('',(0.42,0.)); #203 = VECTOR('',#204,1.); #204 = DIRECTION('',(0.,1.)); #205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -247,12 +247,12 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #206 = PCURVE('',#207,#212); #207 = PLANE('',#208); #208 = AXIS2_PLACEMENT_3D('',#209,#210,#211);-#209 = CARTESIAN_POINT('',(-3.,-2.967,0.517));+#209 = CARTESIAN_POINT('',(-3.,-2.97,0.47)); #210 = DIRECTION('',(0.,0.707106781187,-0.707106781187)); #211 = DIRECTION('',(-1.,0.,0.)); #212 = DEFINITIONAL_REPRESENTATION('',(#213),#217); #213 = LINE('',#214,#215);-#214 = CARTESIAN_POINT('',(0.,-4.666904755831E-02));+#214 = CARTESIAN_POINT('',(0.,-4.242640687119E-02)); #215 = VECTOR('',#216,1.); #216 = DIRECTION('',(-1.,0.)); #217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -264,16 +264,16 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #221 = ORIENTED_EDGE('',*,*,#222,.F.); #222 = EDGE_CURVE('',#24,#223,#225,.T.); #223 = VERTEX_POINT('',#224);-#224 = CARTESIAN_POINT('',(-2.934,-2.934,0.55));+#224 = CARTESIAN_POINT('',(-2.94,-2.94,0.5)); #225 = SURFACE_CURVE('',#226,(#230,#237),.PCURVE_S1.); #226 = LINE('',#227,#228);-#227 = CARTESIAN_POINT('',(-2.978,-2.978,0.506));+#227 = CARTESIAN_POINT('',(-2.98,-2.98,0.46)); #228 = VECTOR('',#229,1.); #229 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); #230 = PCURVE('',#126,#231); #231 = DEFINITIONAL_REPRESENTATION('',(#232),#236); #232 = LINE('',#233,#234);-#233 = CARTESIAN_POINT('',(2.2E-02,-1.55563491861E-02));+#233 = CARTESIAN_POINT('',(2.E-02,-1.414213562373E-02)); #234 = VECTOR('',#235,1.); #235 = DIRECTION('',(0.57735026919,0.816496580928)); #236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -282,7 +282,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #237 = PCURVE('',#207,#238); #238 = DEFINITIONAL_REPRESENTATION('',(#239),#243); #239 = LINE('',#240,#241);-#240 = CARTESIAN_POINT('',(-2.2E-02,-1.55563491861E-02));+#240 = CARTESIAN_POINT('',(-2.E-02,-1.414213562373E-02)); #241 = VECTOR('',#242,1.); #242 = DIRECTION('',(-0.57735026919,0.816496580928)); #243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -292,16 +292,16 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #245 = ORIENTED_EDGE('',*,*,#246,.T.); #246 = EDGE_CURVE('',#85,#247,#249,.T.); #247 = VERTEX_POINT('',#248);-#248 = CARTESIAN_POINT('',(-2.934,2.934,0.55));+#248 = CARTESIAN_POINT('',(-2.94,2.94,0.5)); #249 = SURFACE_CURVE('',#250,(#254,#261),.PCURVE_S1.); #250 = LINE('',#251,#252);-#251 = CARTESIAN_POINT('',(-1.978,1.978,1.506));+#251 = CARTESIAN_POINT('',(-1.98,1.98,1.46)); #252 = VECTOR('',#253,1.); #253 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); #254 = PCURVE('',#126,#255); #255 = DEFINITIONAL_REPRESENTATION('',(#256),#260); #256 = LINE('',#257,#258);-#257 = CARTESIAN_POINT('',(4.978,1.398657213187));+#257 = CARTESIAN_POINT('',(4.98,1.400071426749)); #258 = VECTOR('',#259,1.); #259 = DIRECTION('',(-0.57735026919,0.816496580928)); #260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -310,12 +310,12 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #261 = PCURVE('',#262,#267); #262 = PLANE('',#263); #263 = AXIS2_PLACEMENT_3D('',#264,#265,#266);-#264 = CARTESIAN_POINT('',(-3.,2.967,0.517));+#264 = CARTESIAN_POINT('',(-3.,2.97,0.47)); #265 = DIRECTION('',(0.,0.707106781187,0.707106781187)); #266 = DIRECTION('',(-1.,0.,0.)); #267 = DEFINITIONAL_REPRESENTATION('',(#268),#272); #268 = LINE('',#269,#270);-#269 = CARTESIAN_POINT('',(-1.022,1.398657213187));+#269 = CARTESIAN_POINT('',(-1.02,1.400071426749)); #270 = VECTOR('',#271,1.); #271 = DIRECTION('',(-0.57735026919,0.816496580928)); #272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -325,13 +325,13 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #274 = EDGE_CURVE('',#223,#247,#275,.T.); #275 = SURFACE_CURVE('',#276,(#280,#287),.PCURVE_S1.); #276 = LINE('',#277,#278);-#277 = CARTESIAN_POINT('',(-2.934,-3.,0.55));+#277 = CARTESIAN_POINT('',(-2.94,-3.,0.5)); #278 = VECTOR('',#279,1.); #279 = DIRECTION('',(0.,1.,0.)); #280 = PCURVE('',#126,#281); #281 = DEFINITIONAL_REPRESENTATION('',(#282),#286); #282 = LINE('',#283,#284);-#283 = CARTESIAN_POINT('',(0.,4.666904755831E-02));+#283 = CARTESIAN_POINT('',(0.,4.242640687119E-02)); #284 = VECTOR('',#285,1.); #285 = DIRECTION('',(1.,0.)); #286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -340,12 +340,12 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #287 = PCURVE('',#288,#293); #288 = PLANE('',#289); #289 = AXIS2_PLACEMENT_3D('',#290,#291,#292);-#290 = CARTESIAN_POINT('',(-3.,-3.,0.55));+#290 = CARTESIAN_POINT('',(-3.,-3.,0.5)); #291 = DIRECTION('',(0.,0.,1.)); #292 = DIRECTION('',(1.,0.,0.)); #293 = DEFINITIONAL_REPRESENTATION('',(#294),#298); #294 = LINE('',#295,#296);-#295 = CARTESIAN_POINT('',(6.6E-02,0.));+#295 = CARTESIAN_POINT('',(6.E-02,0.)); #296 = VECTOR('',#297,1.); #297 = DIRECTION('',(0.,1.)); #298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -414,7 +414,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #351 = ORIENTED_EDGE('',*,*,#352,.F.); #352 = EDGE_CURVE('',#306,#353,#355,.T.); #353 = VERTEX_POINT('',#354);-#354 = CARTESIAN_POINT('',(3.,3.,0.484));+#354 = CARTESIAN_POINT('',(3.,3.,0.44)); #355 = SURFACE_CURVE('',#356,(#360,#367),.PCURVE_S1.); #356 = LINE('',#357,#358); #357 = CARTESIAN_POINT('',(3.,3.,2.E-02));@@ -444,13 +444,13 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #377 = EDGE_CURVE('',#85,#353,#378,.T.); #378 = SURFACE_CURVE('',#379,(#383,#390),.PCURVE_S1.); #379 = LINE('',#380,#381);-#380 = CARTESIAN_POINT('',(-3.,3.,0.484));+#380 = CARTESIAN_POINT('',(-3.,3.,0.44)); #381 = VECTOR('',#382,1.); #382 = DIRECTION('',(1.,0.,0.)); #383 = PCURVE('',#100,#384); #384 = DEFINITIONAL_REPRESENTATION('',(#385),#389); #385 = LINE('',#386,#387);-#386 = CARTESIAN_POINT('',(0.464,0.));+#386 = CARTESIAN_POINT('',(0.42,0.)); #387 = VECTOR('',#388,1.); #388 = DIRECTION('',(0.,1.)); #389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -459,7 +459,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #390 = PCURVE('',#262,#391); #391 = DEFINITIONAL_REPRESENTATION('',(#392),#396); #392 = LINE('',#393,#394);-#393 = CARTESIAN_POINT('',(0.,-4.666904755831E-02));+#393 = CARTESIAN_POINT('',(0.,-4.242640687119E-02)); #394 = VECTOR('',#395,1.); #395 = DIRECTION('',(-1.,0.)); #396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -475,13 +475,13 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #404 = EDGE_CURVE('',#144,#353,#405,.T.); #405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.); #406 = LINE('',#407,#408);-#407 = CARTESIAN_POINT('',(3.,-3.,0.484));+#407 = CARTESIAN_POINT('',(3.,-3.,0.44)); #408 = VECTOR('',#409,1.); #409 = DIRECTION('',(0.,1.,0.)); #410 = PCURVE('',#159,#411); #411 = DEFINITIONAL_REPRESENTATION('',(#412),#416); #412 = LINE('',#413,#414);-#413 = CARTESIAN_POINT('',(0.464,0.));+#413 = CARTESIAN_POINT('',(0.42,0.)); #414 = VECTOR('',#415,1.); #415 = DIRECTION('',(0.,-1.)); #416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -490,12 +490,12 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #417 = PCURVE('',#418,#423); #418 = PLANE('',#419); #419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);-#420 = CARTESIAN_POINT('',(2.967,-3.,0.517));+#420 = CARTESIAN_POINT('',(2.97,-3.,0.47)); #421 = DIRECTION('',(0.707106781187,0.,0.707106781187)); #422 = DIRECTION('',(0.,1.,0.)); #423 = DEFINITIONAL_REPRESENTATION('',(#424),#428); #424 = LINE('',#425,#426);-#425 = CARTESIAN_POINT('',(0.,-4.666904755831E-02));+#425 = CARTESIAN_POINT('',(0.,-4.242640687119E-02)); #426 = VECTOR('',#427,1.); #427 = DIRECTION('',(1.,0.)); #428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -509,16 +509,16 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #434 = ORIENTED_EDGE('',*,*,#435,.T.); #435 = EDGE_CURVE('',#144,#436,#438,.T.); #436 = VERTEX_POINT('',#437);-#437 = CARTESIAN_POINT('',(2.934,-2.934,0.55));+#437 = CARTESIAN_POINT('',(2.94,-2.94,0.5)); #438 = SURFACE_CURVE('',#439,(#443,#450),.PCURVE_S1.); #439 = LINE('',#440,#441);-#440 = CARTESIAN_POINT('',(1.978,-1.978,1.506));+#440 = CARTESIAN_POINT('',(1.98,-1.98,1.46)); #441 = VECTOR('',#442,1.); #442 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); #443 = PCURVE('',#207,#444); #444 = DEFINITIONAL_REPRESENTATION('',(#445),#449); #445 = LINE('',#446,#447);-#446 = CARTESIAN_POINT('',(-4.978,1.398657213187));+#446 = CARTESIAN_POINT('',(-4.98,1.400071426749)); #447 = VECTOR('',#448,1.); #448 = DIRECTION('',(0.57735026919,0.816496580928)); #449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -527,7 +527,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #450 = PCURVE('',#418,#451); #451 = DEFINITIONAL_REPRESENTATION('',(#452),#456); #452 = LINE('',#453,#454);-#453 = CARTESIAN_POINT('',(1.022,1.398657213187));+#453 = CARTESIAN_POINT('',(1.02,1.400071426749)); #454 = VECTOR('',#455,1.); #455 = DIRECTION('',(0.57735026919,0.816496580928)); #456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -537,13 +537,13 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #458 = EDGE_CURVE('',#223,#436,#459,.T.); #459 = SURFACE_CURVE('',#460,(#464,#471),.PCURVE_S1.); #460 = LINE('',#461,#462);-#461 = CARTESIAN_POINT('',(-3.,-2.934,0.55));+#461 = CARTESIAN_POINT('',(-3.,-2.94,0.5)); #462 = VECTOR('',#463,1.); #463 = DIRECTION('',(1.,0.,0.)); #464 = PCURVE('',#207,#465); #465 = DEFINITIONAL_REPRESENTATION('',(#466),#470); #466 = LINE('',#467,#468);-#467 = CARTESIAN_POINT('',(0.,4.666904755831E-02));+#467 = CARTESIAN_POINT('',(0.,4.242640687119E-02)); #468 = VECTOR('',#469,1.); #469 = DIRECTION('',(-1.,0.)); #470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -552,7 +552,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #471 = PCURVE('',#288,#472); #472 = DEFINITIONAL_REPRESENTATION('',(#473),#477); #473 = LINE('',#474,#475);-#474 = CARTESIAN_POINT('',(0.,6.6E-02));+#474 = CARTESIAN_POINT('',(0.,6.E-02)); #475 = VECTOR('',#476,1.); #476 = DIRECTION('',(1.,0.)); #477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -566,16 +566,16 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #483 = ORIENTED_EDGE('',*,*,#484,.T.); #484 = EDGE_CURVE('',#436,#485,#487,.T.); #485 = VERTEX_POINT('',#486);-#486 = CARTESIAN_POINT('',(2.934,2.934,0.55));+#486 = CARTESIAN_POINT('',(2.94,2.94,0.5)); #487 = SURFACE_CURVE('',#488,(#492,#499),.PCURVE_S1.); #488 = LINE('',#489,#490);-#489 = CARTESIAN_POINT('',(2.934,-3.,0.55));+#489 = CARTESIAN_POINT('',(2.94,-3.,0.5)); #490 = VECTOR('',#491,1.); #491 = DIRECTION('',(0.,1.,0.)); #492 = PCURVE('',#288,#493); #493 = DEFINITIONAL_REPRESENTATION('',(#494),#498); #494 = LINE('',#495,#496);-#495 = CARTESIAN_POINT('',(5.934,0.));+#495 = CARTESIAN_POINT('',(5.94,0.)); #496 = VECTOR('',#497,1.); #497 = DIRECTION('',(0.,1.)); #498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -584,7 +584,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #499 = PCURVE('',#418,#500); #500 = DEFINITIONAL_REPRESENTATION('',(#501),#505); #501 = LINE('',#502,#503);-#502 = CARTESIAN_POINT('',(0.,4.666904755831E-02));+#502 = CARTESIAN_POINT('',(0.,4.242640687119E-02)); #503 = VECTOR('',#504,1.); #504 = DIRECTION('',(1.,0.)); #505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -594,13 +594,13 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #507 = EDGE_CURVE('',#247,#485,#508,.T.); #508 = SURFACE_CURVE('',#509,(#513,#520),.PCURVE_S1.); #509 = LINE('',#510,#511);-#510 = CARTESIAN_POINT('',(-3.,2.934,0.55));+#510 = CARTESIAN_POINT('',(-3.,2.94,0.5)); #511 = VECTOR('',#512,1.); #512 = DIRECTION('',(1.,0.,0.)); #513 = PCURVE('',#288,#514); #514 = DEFINITIONAL_REPRESENTATION('',(#515),#519); #515 = LINE('',#516,#517);-#516 = CARTESIAN_POINT('',(0.,5.934));+#516 = CARTESIAN_POINT('',(0.,5.94)); #517 = VECTOR('',#518,1.); #518 = DIRECTION('',(1.,0.)); #519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -609,7 +609,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #520 = PCURVE('',#262,#521); #521 = DEFINITIONAL_REPRESENTATION('',(#522),#526); #522 = LINE('',#523,#524);-#523 = CARTESIAN_POINT('',(0.,4.666904755831E-02));+#523 = CARTESIAN_POINT('',(0.,4.242640687119E-02)); #524 = VECTOR('',#525,1.); #525 = DIRECTION('',(-1.,0.)); #526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -620,11 +620,11 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #529 = ORIENTED_EDGE('',*,*,#530,.T.); #530 = EDGE_CURVE('',#531,#531,#533,.T.); #531 = VERTEX_POINT('',#532);-#532 = CARTESIAN_POINT('',(-2.04,2.34,0.55));+#532 = CARTESIAN_POINT('',(-2.04,2.34,0.5)); #533 = SURFACE_CURVE('',#534,(#539,#550),.PCURVE_S1.); #534 = CIRCLE('',#535,0.3); #535 = AXIS2_PLACEMENT_3D('',#536,#537,#538);-#536 = CARTESIAN_POINT('',(-2.34,2.34,0.55));+#536 = CARTESIAN_POINT('',(-2.34,2.34,0.5)); #537 = DIRECTION('',(0.,0.,-1.)); #538 = DIRECTION('',(1.,0.,0.)); #539 = PCURVE('',#288,#540);@@ -648,7 +648,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #550 = PCURVE('',#551,#556); #551 = CYLINDRICAL_SURFACE('',#552,0.3); #552 = AXIS2_PLACEMENT_3D('',#553,#554,#555);-#553 = CARTESIAN_POINT('',(-2.34,2.34,0.5));+#553 = CARTESIAN_POINT('',(-2.34,2.34,0.45)); #554 = DIRECTION('',(-0.,-0.,-1.)); #555 = DIRECTION('',(1.,0.,0.)); #556 = DEFINITIONAL_REPRESENTATION('',(#557),#561);@@ -668,13 +668,13 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #568 = EDGE_CURVE('',#353,#485,#569,.T.); #569 = SURFACE_CURVE('',#570,(#574,#581),.PCURVE_S1.); #570 = LINE('',#571,#572);-#571 = CARTESIAN_POINT('',(0.978,0.978,2.506));+#571 = CARTESIAN_POINT('',(0.98,0.98,2.46)); #572 = VECTOR('',#573,1.); #573 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); #574 = PCURVE('',#262,#575); #575 = DEFINITIONAL_REPRESENTATION('',(#576),#580); #576 = LINE('',#577,#578);-#577 = CARTESIAN_POINT('',(-3.978,2.81287077556));+#577 = CARTESIAN_POINT('',(-3.98,2.814284989122)); #578 = VECTOR('',#579,1.); #579 = DIRECTION('',(0.57735026919,0.816496580928)); #580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -683,7 +683,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #581 = PCURVE('',#418,#582); #582 = DEFINITIONAL_REPRESENTATION('',(#583),#587); #583 = LINE('',#584,#585);-#584 = CARTESIAN_POINT('',(3.978,2.81287077556));+#584 = CARTESIAN_POINT('',(3.98,2.814284989122)); #585 = VECTOR('',#586,1.); #586 = DIRECTION('',(-0.57735026919,0.816496580928)); #587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -703,10 +703,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #599 = ORIENTED_EDGE('',*,*,#600,.T.); #600 = EDGE_CURVE('',#601,#531,#603,.T.); #601 = VERTEX_POINT('',#602);-#602 = CARTESIAN_POINT('',(-2.04,2.34,0.5));+#602 = CARTESIAN_POINT('',(-2.04,2.34,0.45)); #603 = SEAM_CURVE('',#604,(#608,#615),.PCURVE_S1.); #604 = LINE('',#605,#606);-#605 = CARTESIAN_POINT('',(-2.04,2.34,0.5));+#605 = CARTESIAN_POINT('',(-2.04,2.34,0.45)); #606 = VECTOR('',#607,1.); #607 = DIRECTION('',(0.,0.,1.)); #608 = PCURVE('',#551,#609);@@ -734,7 +734,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #626 = SURFACE_CURVE('',#627,(#632,#639),.PCURVE_S1.); #627 = CIRCLE('',#628,0.3); #628 = AXIS2_PLACEMENT_3D('',#629,#630,#631);-#629 = CARTESIAN_POINT('',(-2.34,2.34,0.5));+#629 = CARTESIAN_POINT('',(-2.34,2.34,0.45)); #630 = DIRECTION('',(0.,0.,1.)); #631 = DIRECTION('',(1.,0.,0.)); #632 = PCURVE('',#551,#633);@@ -749,7 +749,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #639 = PCURVE('',#640,#645); #640 = PLANE('',#641); #641 = AXIS2_PLACEMENT_3D('',#642,#643,#644);-#642 = CARTESIAN_POINT('',(-2.34,2.34,0.5));+#642 = CARTESIAN_POINT('',(-2.34,2.34,0.45)); #643 = DIRECTION('',(0.,0.,1.)); #644 = DIRECTION('',(1.,0.,0.)); #645 = DEFINITIONAL_REPRESENTATION('',(#646),#650);@@ -11734,17 +11734,17 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #10230 = ORIENTED_EDGE('',*,*,#10231,.T.); #10231 = EDGE_CURVE('',#10232,#10232,#10234,.T.); #10232 = VERTEX_POINT('',#10233);-#10233 = CARTESIAN_POINT('',(-2.04,2.34,0.5));+#10233 = CARTESIAN_POINT('',(-2.04,2.34,0.45)); #10234 = SURFACE_CURVE('',#10235,(#10240,#10252),.PCURVE_S1.); #10235 = CIRCLE('',#10236,0.3); #10236 = AXIS2_PLACEMENT_3D('',#10237,#10238,#10239);-#10237 = CARTESIAN_POINT('',(-2.34,2.34,0.5));+#10237 = CARTESIAN_POINT('',(-2.34,2.34,0.45)); #10238 = DIRECTION('',(0.,0.,1.)); #10239 = DIRECTION('',(1.,0.,0.)); #10240 = PCURVE('',#10241,#10246); #10241 = CYLINDRICAL_SURFACE('',#10242,0.3); #10242 = AXIS2_PLACEMENT_3D('',#10243,#10244,#10245);-#10243 = CARTESIAN_POINT('',(-2.34,2.34,0.5));+#10243 = CARTESIAN_POINT('',(-2.34,2.34,0.45)); #10244 = DIRECTION('',(-0.,-0.,-1.)); #10245 = DIRECTION('',(1.,0.,0.)); #10246 = DEFINITIONAL_REPRESENTATION('',(#10247),#10251);@@ -11758,7 +11758,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #10252 = PCURVE('',#10253,#10258); #10253 = PLANE('',#10254); #10254 = AXIS2_PLACEMENT_3D('',#10255,#10256,#10257);-#10255 = CARTESIAN_POINT('',(-2.34,2.34,0.5));+#10255 = CARTESIAN_POINT('',(-2.34,2.34,0.45)); #10256 = DIRECTION('',(0.,0.,1.)); #10257 = DIRECTION('',(1.,0.,0.)); #10258 = DEFINITIONAL_REPRESENTATION('',(#10259),#10263);@@ -11772,10 +11772,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #10264 = ORIENTED_EDGE('',*,*,#10265,.T.); #10265 = EDGE_CURVE('',#10232,#10266,#10268,.T.); #10266 = VERTEX_POINT('',#10267);-#10267 = CARTESIAN_POINT('',(-2.04,2.34,0.505));+#10267 = CARTESIAN_POINT('',(-2.04,2.34,0.455)); #10268 = SEAM_CURVE('',#10269,(#10273,#10280),.PCURVE_S1.); #10269 = LINE('',#10270,#10271);-#10270 = CARTESIAN_POINT('',(-2.04,2.34,0.5));+#10270 = CARTESIAN_POINT('',(-2.04,2.34,0.45)); #10271 = VECTOR('',#10272,1.); #10272 = DIRECTION('',(0.,0.,1.)); #10273 = PCURVE('',#10241,#10274);@@ -11801,7 +11801,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #10289 = SURFACE_CURVE('',#10290,(#10295,#10302),.PCURVE_S1.); #10290 = CIRCLE('',#10291,0.3); #10291 = AXIS2_PLACEMENT_3D('',#10292,#10293,#10294);-#10292 = CARTESIAN_POINT('',(-2.34,2.34,0.505));+#10292 = CARTESIAN_POINT('',(-2.34,2.34,0.455)); #10293 = DIRECTION('',(0.,0.,1.)); #10294 = DIRECTION('',(1.,0.,0.)); #10295 = PCURVE('',#10241,#10296);@@ -11816,7 +11816,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #10302 = PCURVE('',#10303,#10308); #10303 = PLANE('',#10304); #10304 = AXIS2_PLACEMENT_3D('',#10305,#10306,#10307);-#10305 = CARTESIAN_POINT('',(-2.34,2.34,0.505));+#10305 = CARTESIAN_POINT('',(-2.34,2.34,0.455)); #10306 = DIRECTION('',(0.,0.,1.)); #10307 = DIRECTION('',(1.,0.,0.)); #10308 = DEFINITIONAL_REPRESENTATION('',(#10309),#10313);