3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC18F26K42T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)
PIC18F26K42T-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2 | bidirectional | PORTA bit 2 digital I/O with analog input ANA2, VREF- reference input, DAC1OUT1, comparator inputs C1IN0+/C2IN0+, and interrupt-on-change IOCA2; analog-function pins read as '0' when ANSEL is set. |
| 2 | RA3 | bidirectional | PORTA bit 3 digital I/O with analog input ANA3, VREF+ reference input, comparator input C1IN1+, MDCARL PPS input, and interrupt-on-change IOCA3. |
| 3 | RA4 | bidirectional | PORTA bit 4 digital I/O with analog input ANA4, MDCARH and T0CKI (PPS-remappable inputs), and interrupt-on-change IOCA4. |
| 4 | RA5 | bidirectional | PORTA bit 5 digital I/O with analog input ANA5, SS1 and MDSRC (PPS-remappable inputs), and interrupt-on-change IOCA5. |
| 5 | VSS | power_in | Ground reference; the datasheet requires all VSS pins to be connected and states the exposed pad must not be the only VSS connection. |
| 6 | RA7 | bidirectional | PORTA bit 7 digital I/O with analog input ANA7, OSC1/CLKIN oscillator input function, and interrupt-on-change IOCA7. |
| 7 | RA6 | bidirectional | PORTA bit 6 digital I/O with analog input ANA6, OSC2/CLKOUT oscillator output or clock-out function, and interrupt-on-change IOCA6. |
| 8 | RC0 | bidirectional | PORTC bit 0 digital I/O with analog input ANC0, SOSCO secondary oscillator output, PPS-remappable T1CKI/T3CKI/T3G/SMTWIN1 inputs, and interrupt-on-change IOCC0. |
| 9 | RC1 | bidirectional | PORTC bit 1 digital I/O with analog input ANC1, SOSCI secondary oscillator input, PPS-remappable SMTSIG1 input and CCP2 output, and interrupt-on-change IOCC1. |
| 10 | RC2 | bidirectional | PORTC bit 2 digital I/O with analog input ANC2, PPS-remappable T5CKI input and CCP1 output, and interrupt-on-change IOCC2. |
| 11 | RC3 | bidirectional | PORTC bit 3 digital I/O with analog input ANC3, SCL1 (I2C, can use I2C/SMBus 3.0/2.0 levels), SCK1 SPI clock, PPS-remappable T2IN input, and interrupt-on-change IOCC3. |
| 12 | RC4 | bidirectional | PORTC bit 4 digital I/O with analog input ANC4, SDA1 (I2C, can use I2C/SMBus 3.0/2.0 levels), SDI1 SPI data input, and interrupt-on-change IOCC4. |
| 13 | RC5 | bidirectional | PORTC bit 5 digital I/O with analog input ANC5, PPS-remappable T4IN input, and interrupt-on-change IOCC5. |
| 14 | RC6 | bidirectional | PORTC bit 6 digital I/O with analog input ANC6, PPS-remappable CTS1 input, and interrupt-on-change IOCC6. |
| 15 | RC7 | bidirectional | PORTC bit 7 digital I/O with analog input ANC7, PPS-remappable RX1 UART receive input, and interrupt-on-change IOCC7. |
| 16 | VSS | power_in | Ground reference; the datasheet requires all VSS pins to be connected and states the exposed pad must not be the only VSS connection. |
| 17 | VDD | power_in | Positive supply pin; the datasheet requires decoupling on every VDD/VSS pair with a 0.1 µF ceramic capacitor (recommended). |
| 18 | RB0 | bidirectional | PORTB bit 0 digital I/O with analog input ANB0, comparator input C2IN1+, ZCD input, PPS-remappable CCP4/CWG1IN/INT0 functions, and interrupt-on-change IOCB0. |
| 19 | RB1 | bidirectional | PORTB bit 1 digital I/O with analog input ANB1, comparator inputs C1IN3-/C2IN3-, SCL2 (I2C, can use I2C/SMBus 3.0/2.0 levels), CWG2IN, INT1, and interrupt-on-change IOCB1. |
| 20 | RB2 | bidirectional | PORTB bit 2 digital I/O with analog input ANB2, SDA2 (I2C, can use I2C/SMBus 3.0/2.0 levels), CWG3IN, INT2, and interrupt-on-change IOCB2. |
| 21 | RB3 | bidirectional | PORTB bit 3 digital I/O with analog input ANB3, comparator inputs C1IN2-/C2IN2-, and interrupt-on-change IOCB3. |
| 22 | RB4 | bidirectional | PORTB bit 4 digital I/O with analog input ANB4, ADCACT auto-conversion trigger input, PPS-remappable T5G input, and interrupt-on-change IOCB4. |
| 23 | RB5 | bidirectional | PORTB bit 5 digital I/O with analog input ANB5, PPS-remappable T1G input and CCP3 output, and interrupt-on-change IOCB5. |
| 24 | RB6 | bidirectional | PORTB bit 6 digital I/O with analog input ANB6, ICSP clock ICSPCLK (programming/debug), PPS-remappable CTS2 and CLCIN2 inputs, and interrupt-on-change IOCB6. |
| 25 | RB7 | bidirectional | PORTB bit 7 digital I/O with analog input ANB7, ICSP data ICSPDAT (programming/debug), DAC1OUT2 output, PPS-remappable RX2/T6IN/CLCIN3 inputs, and interrupt-on-change IOCB7. |
| 26 | RE3/MCLR/VPP | input | Input-only pin: functions as MCLR (active reset input, controlled by MCLRE) or as digital input RE3 when MCLR is disabled, and as the programming voltage input VPP during programming; it reads '1' while MCLRE = 1. |
| 27 | RA0 | bidirectional | PORTA bit 0 digital I/O with analog input ANA0, comparator inputs C1IN0-/C2IN0-, PPS-remappable CLCIN0, and interrupt-on-change IOCA0. |
| 28 | RA1 | bidirectional | PORTA bit 1 digital I/O with analog input ANA1, comparator inputs C1IN1-/C2IN1-, PPS-remappable CLCIN1, and interrupt-on-change IOCA1. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-28-EP(6x6) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 738 | |||
| Storage temperature | -65 | 150 | °C | 738 | |||
| Voltage on VDD pin with respect to VSS | VDD | -0.3 | 6.5 | V | PIC18F26/27/45/46/47/55/56/57K42 (non-LF) | 738 | |
| Voltage on MCLR pin with respect to VSS | -0.3 | 9 | V | 738 | |||
| Voltage on all other pins with respect to VSS | -0.3 | V | Upper limit printed as VDD + 0.3V | 738 | |||
| Maximum current on VSS pin | 350 | mA | -40°C ≤ TA ≤ +85°C | 738 | |||
| Maximum current on VSS pin | 120 | mA | 85°C ≤ TA ≤ +125°C | 738 | |||
| Maximum current on VDD pin (28-pin devices) | 250 | mA | -40°C ≤ TA ≤ +85°C | 738 | |||
| Maximum current on VDD pin (28-pin devices) | 85 | mA | 85°C ≤ TA ≤ +125°C | 738 | |||
| Maximum current on any standard I/O pin | 50 | mA | 738 | ||||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 738 | ||
| Total power dissipation | 800 | mW | 738 | ||||
| Operating ambient temperature range (Industrial) | TA | -40 | 85 | °C | Industrial temperature (-I) grade | 739 | |
| Supply voltage | VDD | 2.3 | 5.5 | V | FOSC ≤ 16 MHz | 741 | |
| Supply voltage | VDD | 2.5 | 5.5 | V | FOSC ≤ 32 MHz | 741 | |
| Supply voltage | VDD | 2.7 | 5.5 | V | FOSC ≤ 64 MHz | 741 | |
| RAM data retention voltage | VDR | 1.7 | V | Device in Sleep mode | 741 | ||
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | BOR or LPBOR disabled | 741 | ||
| Supply current, XT = 4 MHz | IDDXT4 | 680 | 1100 | µA | XT = 4 MHz, 3.0V | 743 | |
| Supply current, HFINTOSC = 16 MHz | IDDHFO16 | 3 | 4.2 | mA | HFINTOSC = 16 MHz, 3.0V | 743 | |
| Supply current, HFINTOSC = 64 MHz | IDDHFOPLL | 11.6 | 14 | mA | HFINTOSC = 64 MHz, 3.0V | 743 | |
| Supply current, HS+PLL = 64 MHz | IDDHSPLL64 | 9.9 | 13 | mA | HS+PLL = 64 MHz, 3.0V | 743 | |
| Supply current, Idle mode | IDDIDLE | 1.9 | 2.9 | mA | Idle mode, HFINTOSC = 16 MHz, 3.0V | 743 | |
| Power-down current (IPD base) | IPD | 0.4 | 4 | µA | 3.0V, VREGPM = 1, max at +85°C | 745 | |
| Power-down current (IPD base) | IPD | 0.4 | 14 | µA | 3.0V, VREGPM = 1, max at +125°C | 745 | |
| Power-down current, FVR | IPD_FVR | 33 | 76 | µA | FVRCON = 0x81 or 0x84, 3.0V, max at +85°C | 745 | |
| Power-down current, FVR | IPD_FVR | 33 | 81 | µA | FVRCON = 0x81 or 0x84, 3.0V, max at +125°C | 745 | |
| Power-down current, Brown-out Reset (BOR) | IPD_BOR | 9.8 | 16 | µA | 3.0V, max at +85°C | 745 | |
| Power-down current, Brown-out Reset (BOR) | IPD_BOR | 9.8 | 21.2 | µA | 3.0V, max at +125°C | 745 | |
| Power-down current, High/Low Voltage Detect (HLVD) | IPD_HLVD | 9.5 | 14 | µA | 3.0V, max at +85°C | 745 | |
| Power-down current, High/Low Voltage Detect (HLVD) | IPD_HLVD | 9.5 | 22 | µA | 3.0V, max at +125°C | 745 | |
| Input low voltage, I/O with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 746 | ||
| Input low voltage, I/O with SMBus 2.0 | VIL | 0.8 | V | 2.7V ≤ VDD ≤ 5.5V | 746 | ||
| Input low voltage, I/O with SMBus 3.0 | VIL | 0.8 | V | 1.8V ≤ VDD ≤ 5.5V | 746 | ||
| Input high voltage, I/O with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 746 | ||
| Input high voltage, I/O with SMBus 2.0 | VIH | 2.1 | V | 2.7V ≤ VDD ≤ 5.5V | 746 | ||
| Input high voltage, I/O with SMBus 3.0 | VIH | 1.35 | V | 1.8V ≤ VDD ≤ 5.5V | 746 | ||
| Input leakage current, I/O ports | IIL | -125 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 746 | |
| Input leakage current, I/O ports | IIL | -1000 | 1000 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 125°C | 746 | |
| Input leakage current, MCLR | IIL | -200 | 200 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 746 | |
| Weak pull-up current | IPUR | 25 | 120 | 200 | µA | VDD = 3.0V, VPIN = VSS | 746 |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 10.0 mA, VDD = 3.0V | 746 | ||
| Pin capacitance, all I/O pins | CIO | 5 | 50 | pF | 746 | ||
| Data EEPROM byte endurance | ED | 100 | k E/W | -40°C ≤ TA ≤ +85°C | 747 | ||
| Byte erase and write cycle time | TD_BEW | 4 | 5 | ms | 747 | ||
| Program Flash memory cell endurance | EP | 10 | k E/W | -40°C ≤ TA ≤ +85°C | 747 | ||
| Self-timed row erase or self-timed write time | TP_REW | 2 | 2.5 | ms | 747 | ||
| Secondary oscillator clock frequency | FSEC | 32.4 | 32.768 | 33.1 | kHz | Secondary oscillator | 750 |
| System clock frequency | FOSC | 64 | MHz | Note 2, Note 3 | 750 | ||
| Instruction period | TCY | 62.5 | ns | 751 | |||
| Internal LFINTOSC frequency | FLFOSC | 24.8 | 31 | 37.2 | kHz | 752 | |
| PLL input frequency range | FPLLIN | 4 | 16 | MHz | 753 | ||
| PLL output frequency range | FPLLOUT | 16 | 64 | MHz | Note 1 | 753 | |
| PLL output frequency stability (jitter) | FPLLJIT | -0.25 | 0.25 | % | VDD 2.5V (table header) | 753 | |
| Thermal resistance junction to ambient, 28-pin QFN 6x6 mm | JA | 27.5 | °C/W | 28-pin QFN 6x6mm package | 748 | ||
| Thermal resistance junction to case, 28-pin QFN 6x6 mm | JC | 24 | °C/W | 28-pin QFN 6x6mm package | 748 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 748 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
PIC18F26K42T-I - Footprint:
Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm - 3D model: QFN-28-EP(6x6), generated on the KiCad land (body 6 x 6 mm, terminals on the pads, 0.5 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
pic18f26k42t-i-ml-etched.step/pic18f26k42t-i-ml-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f26k42t-i-ml.step/pic18f26k42t-i-ml.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (841 pp, sha256
dc561c5218c927f3, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).