main
Ray Publish 0.1.1 d983412
{
  "schema_version": 1,
  "type": "component",
  "slug": "pic18f26j50-i-ml",
  "title": "PIC18F26J50-I/ML",
  "brief": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), QFN-28-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "single chip microcomputer-microcontroller",
    "pic18f26j50-i",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "PIC18F26J50-I/ML",
    "manufacturer": "Microchip Tech",
    "package": "QFN-28-EP(6x6)",
    "pin_count": 29,
    "category": "Single Chip Microcomputer/Microcontroller",
    "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
    "datasheet": "https://ww1.microchip.com/downloads/en/DeviceDoc/39931d.pdf",
    "parts": {
      "symbol": "pic18f26j50-i.kicad_sym",
      "footprint": "pic18f26j50-i.kicad_mod",
      "model_3d": "pic18f26j50-i-ml-hero.glb",
      "model_3d_plain": "pic18f26j50-i-etched.glb",
      "model_3d_step": "pic18f26j50-i-etched.step",
      "model_3d_step_plain": "pic18f26j50-i.step",
      "lbr": "pic18f26j50-i.lbr"
    },
    "distributor_links": {
      "lcsc": "C640000"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T18:41:31Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RA2/AN2/VREF-/CVREF/C2INB",
        "type": "bidirectional",
        "description": "PORTA digital I/O, also Analog Input 2, A/D reference voltage (low) input, comparator reference voltage output and Comparator 2 Input B."
      },
      {
        "number": "2",
        "name": "RA3/AN3/VREF+/C1INB",
        "type": "bidirectional",
        "description": "PORTA digital I/O, also Analog Input 3, A/D reference voltage (high) input and Comparator 1 Input B."
      },
      {
        "number": "3",
        "name": "VDDCORE/VCAP",
        "type": "passive",
        "description": "Core logic supply (VDDCORE, regulator disabled on LF parts) or external filter capacitor connection (VCAP, regulator enabled on F parts); on F parts connect only a 10 µF low-ESR capacitor to ground."
      },
      {
        "number": "4",
        "name": "RA5/AN4/SS1/HLVDIN/RCV/RP2",
        "type": "bidirectional",
        "description": "PORTA digital I/O, also Analog Input 4, SPI slave select input, Low-Voltage Detect input, external USB transceiver RCV input and remappable peripheral pin RP2."
      },
      {
        "number": "5",
        "name": "VSS1",
        "type": "power_in",
        "description": "Ground reference for logic and I/O pins."
      },
      {
        "number": "6",
        "name": "OSC1/CLKI/RA7",
        "type": "input",
        "description": "Oscillator crystal or external clock input (ST buffer in RC mode, CMOS otherwise), or digital I/O RA7 when not used for the clock function."
      },
      {
        "number": "7",
        "name": "OSC2/CLKO/RA6",
        "type": "output",
        "description": "Oscillator crystal output or CLKO (1/4 the frequency of OSC1, the instruction cycle rate) in RC mode, or digital I/O RA6 when not used for the clock function."
      },
      {
        "number": "8",
        "name": "RC0/T1OSO/T1CKI/RP11",
        "type": "bidirectional",
        "description": "PORTC digital I/O, also Timer1 oscillator output, Timer1 external digital clock input and remappable peripheral pin RP11."
      },
      {
        "number": "9",
        "name": "RC1/T1OSI/UOE/RP12",
        "type": "bidirectional",
        "description": "PORTC digital I/O, also Timer1 oscillator input, external USB transceiver NOE output and remappable peripheral pin RP12."
      },
      {
        "number": "10",
        "name": "RC2/AN11/CTPLS/RP13",
        "type": "bidirectional",
        "description": "PORTC digital I/O, also Analog Input 11, CTMU pulse generator output and remappable peripheral pin RP13."
      },
      {
        "number": "11",
        "name": "VUSB",
        "type": "power_in",
        "description": "USB voltage input pin; also sets the input buffer level for RC4 and RC5 and should not be left floating if they are used as inputs."
      },
      {
        "number": "12",
        "name": "RC4/D-/VM",
        "type": "bidirectional",
        "description": "Digital input, USB bus minus line input/output, and external USB transceiver VM input."
      },
      {
        "number": "13",
        "name": "RC5/D+/VP",
        "type": "bidirectional",
        "description": "Digital input, USB bus plus line input/output, and external USB transceiver VP input."
      },
      {
        "number": "14",
        "name": "RC6/TX1/CK1/RP17",
        "type": "bidirectional",
        "description": "PORTC digital I/O, also EUSART1 asynchronous transmit, EUSART1 synchronous clock and remappable peripheral pin RP17."
      },
      {
        "number": "15",
        "name": "RC7/RX1/DT1/SDO1/RP18",
        "type": "bidirectional",
        "description": "PORTC digital I/O, also EUSART1 asynchronous receive, synchronous data input/output, SPI data output and remappable peripheral pin RP18."
      },
      {
        "number": "16",
        "name": "VSS2",
        "type": "power_in",
        "description": "Ground reference for logic and I/O pins."
      },
      {
        "number": "17",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply for peripheral digital logic and I/O pins."
      },
      {
        "number": "18",
        "name": "RB0/AN12/INT0/RP3",
        "type": "bidirectional",
        "description": "PORTB digital I/O with weak pull-up option, also Analog Input 12, External Interrupt 0 and remappable peripheral pin RP3."
      },
      {
        "number": "19",
        "name": "RB1/AN10/RTCC/RP4",
        "type": "bidirectional",
        "description": "PORTB digital I/O with weak pull-up option, also Analog Input 10, RTCC output and remappable peripheral pin RP4."
      },
      {
        "number": "20",
        "name": "RB2/AN8/CTED1/VMO/REFO/RP5",
        "type": "bidirectional",
        "description": "PORTB digital I/O with weak pull-up option, also Analog Input 8, CTMU Edge 1 input, external USB transceiver D- data output, reference output clock and remappable pin RP5."
      },
      {
        "number": "21",
        "name": "RB3/AN9/CTED2/VPO/RP6",
        "type": "bidirectional",
        "description": "PORTB digital I/O with weak pull-up option, also Analog Input 9, CTMU Edge 2 input, external USB transceiver D+ data output and remappable pin RP6."
      },
      {
        "number": "22",
        "name": "RB4/KBI0/SCK1/SCL1/RP7",
        "type": "bidirectional",
        "description": "PORTB digital I/O with weak pull-up option, also interrupt-on-change, SPI/I2C clock (SCK1/SCL1) and remappable peripheral pin RP7."
      },
      {
        "number": "23",
        "name": "RB5/KBI1/SDI1/SDA1/RP8",
        "type": "bidirectional",
        "description": "PORTB digital I/O with weak pull-up option, also interrupt-on-change, SPI data input, I2C data (SDA1) and remappable peripheral pin RP8."
      },
      {
        "number": "24",
        "name": "RB6/KBI2/PGC/RP9",
        "type": "bidirectional",
        "description": "PORTB digital I/O with weak pull-up option, also interrupt-on-change, ICSP clock input and remappable peripheral pin RP9."
      },
      {
        "number": "25",
        "name": "RB7/KBI3/PGD/RP10",
        "type": "bidirectional",
        "description": "PORTB digital I/O with weak pull-up option, also interrupt-on-change, in-circuit debugger and ICSP programming data pin and remappable peripheral pin RP10."
      },
      {
        "number": "26",
        "name": "MCLR",
        "type": "input",
        "description": "Master Clear (Reset) input; active-low Reset to the device."
      },
      {
        "number": "27",
        "name": "RA0/AN0/C1INA/ULPWU/RP0",
        "type": "bidirectional",
        "description": "PORTA digital I/O, also Analog Input 0, Comparator 1 Input A, Ultra Low-Power Wake-up input and remappable peripheral pin RP0."
      },
      {
        "number": "28",
        "name": "RA1/AN1/C2INA/RP1",
        "type": "bidirectional",
        "description": "PORTA digital I/O, also Analog Input 1, Comparator 2 Input A and remappable peripheral pin RP1."
      },
      {
        "number": "29",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The package drawing shows an exposed pad, but the pin table has no pad entry or connection guidance ; VDDCORE/VCAP has two roles: a supply for LF parts and a filter-capacitor pin for F parts. PIC18F26J5; The datasheet lists the RC4 pin type as input in the pin table but also describes USB D- as bidirect"
        ],
        "pages_sent": 90,
        "cost_usd": 0.8449,
        "at": "2026-10-31T18:41:17"
      },
      "datasheet": {
        "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/39931d.pdf",
        "pages": 562,
        "sha256": "4ea9417d298a28c1",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 29,
        "described": 29,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pic18f26j50-i.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          6,
          0.93
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "64a3dae9c9f9a8105c3bb3049fb2c326b3235bef9a1fff0bf5e22c753fbc9b55",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pic18f26j50-i-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          6,
          0.93
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "8324f0530cda5fe6ca4ef50fe3c6dc476be0a8c3494afcff0f95a11db25be52d",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "family": {
      "base": "PIC18F26J50-I",
      "siblings": [
        "PIC18F26J50-I/SP",
        "PIC18F26J50-I/SS"
      ],
      "old_slug": "pic18f26j50-i",
      "note": "renamed from the cut-base slug to the part it was built from (slug collision split, 2026-11-11)"
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Microchip Tech",
      "Package": "QFN-28-EP(6x6)",
      "Category": "Single Chip Microcomputer/Microcontroller",
      "Pins": "29"
    },
    "appearance": {
      "housing": {
        "quote": "the 10-bit time base. 2: These pins are remappable.",
        "page": 253,
        "doc": "ds.pdf",
        "material": "ppa"
      },
      "version": 1,
      "datasheet_sha256": "4ea9417d298a28c13c542ddb81c3d0ece5c98bf4bef2b27af5cdb321ec40e7ea"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "4ea9417d298a28c13c542ddb81c3d0ece5c98bf4bef2b27af5cdb321ec40e7ea",
      "rows": [
        {
          "name": "Supply voltage (F device, regulator enabled)",
          "symbol": "VDD",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 2.15,
          "typ": null,
          "max": 3.6,
          "conditions": "F part with VDDCORE pin connected to VSS through low-ESR capacitor",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Operating frequency",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "MHz",
          "min": 0,
          "typ": null,
          "max": 48,
          "conditions": "DC – 48 MHz",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "Input voltage tolerance on 5.5V-tolerant digital-only pins",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 5.5,
          "conditions": "PORTB<7:4>, PORTC<7:6> and digital-only pins",
          "source_page": 132,
          "source": "datasheet"
        },
        {
          "name": "VCAP/VDDCORE capacitor ESR",
          "symbol": "ESR",
          "kind": "recommended_operating",
          "unit": "Ω",
          "min": null,
          "typ": null,
          "max": 5,
          "conditions": "F devices, low-ESR capacitor required on VCAP/VDDCORE",
          "source_page": 31,
          "source": "datasheet"
        },
        {
          "name": "VCAP/VDDCORE capacitor value",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "µF",
          "min": null,
          "typ": 10,
          "max": null,
          "conditions": "F devices, connected to ground only",
          "source_page": 31,
          "source": "datasheet"
        },
        {
          "name": "High-current sink/source (PORTB and PORTC)",
          "symbol": "",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 25,
          "conditions": "25 mA/25 mA sink/source",
          "source_page": 3,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "pic18f26j50-i"
  ],
  "discovery_pitch": "PIC18F26J50-I (Microchip Tech) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pic18f26j50-i.kicad_sym",
    "pic18f26j50-i.kicad_mod",
    "pic18f26j50-i.glb",
    "pic18f26j50-i.step",
    "pic18f26j50-i.lbr",
    "docs/hero.png",
    "docs/pic18f26j50-i-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pic18f26j50-i-hero.glb",
    "pic18f26j50-i-hero.overlay.json",
    "pic18f26j50-i-etched.glb",
    "pic18f26j50-i-etched.step",
    "pic18f26j50-i-ml-hero.glb",
    "pic18f26j50-i-ml-hero.overlay.json"
  ],
  "visibility": "public",
  "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), QFN-28-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}