main
Ray Publish 0.1.0 65da570

PIC18F25K50T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)

PIC18F25K50T-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA2 bidirectional General-purpose I/O port pin RA2 with AN2 analog input, C2IN+ comparator input, VREF- and DACOUT functions.
2 RA3 bidirectional General-purpose I/O port pin RA3 with AN3 analog input, C1IN+ comparator input and VREF+ reference input.
3 RA4 bidirectional General-purpose I/O port pin RA4 with C1OUT comparator output, SRQ SR latch output and T0CKI Timer0 clock input.
4 RA5 bidirectional General-purpose I/O port pin RA5 with AN4 analog input, C2OUT comparator output, SRNQ SR latch output, LVDIN and SS (MSSP slave select).
5 VSS power_in Ground reference for logic and I/O pins.
6 RA7 bidirectional General-purpose I/O port pin RA7, also OSC1 oscillator input and CLKI external clock input.
7 RA6 bidirectional General-purpose I/O port pin RA6, also OSC2 oscillator output and CLKO.
8 RC0 bidirectional General-purpose I/O port pin RC0 with SOSCO secondary oscillator output, T1CKI, T3CKI, T3G and interrupt-on-change IOCC0.
9 RC1 bidirectional General-purpose I/O port pin RC1 with CCP2, SOSCI secondary oscillator input and interrupt-on-change IOCC1.
10 RC2 bidirectional General-purpose I/O port pin RC2 with AN14 analog input, CTPLS, CCP1/P1A and interrupt-on-change IOCC2.
11 VUSB3V3 power_out USB internal 3.3V regulator pin (VUSB3V3, also listed as VDDCORE).
12 RC4/D- bidirectional RC4 digital input only (no output functionality) and USB D- differential data line, with interrupt-on-change IOCC4.
13 RC5/D+ bidirectional RC5 digital input only (no output functionality) and USB D+ differential data line, with interrupt-on-change IOCC5.
14 RC6 bidirectional General-purpose I/O port pin RC6 with AN18 analog input, EUSART TX/CK and interrupt-on-change IOCC6.
15 RC7 bidirectional General-purpose I/O port pin RC7 with AN19 analog input, EUSART RX/DT, alternate SDO and interrupt-on-change IOCC7.
16 VSS power_in Ground reference for logic and I/O pins.
17 VDD power_in Positive supply for logic and I/O pins; 2.3V to 5.5V for F devices, 1.8V to 3.6V for LF devices.
18 RB0 bidirectional General-purpose I/O port pin RB0 with AN12, SRI, FLT0, SDI/SDA, INT0 and weak pull-up.
19 RB1 bidirectional General-purpose I/O port pin RB1 with AN10, C12IN3-, P1C, SCK/SCL, INT1 and weak pull-up.
20 RB2 bidirectional General-purpose I/O port pin RB2 with AN8, CTED1, P1B, INT2 and weak pull-up.
21 RB3 bidirectional General-purpose I/O port pin RB3 with AN9, C12IN2-, CTED2, CCP2 (alternate), SDO and weak pull-up.
22 RB4 bidirectional General-purpose I/O port pin RB4 with AN11, P1D, interrupt-on-change IOCB4 and weak pull-up.
23 RB5 bidirectional General-purpose I/O port pin RB5 with AN13, T1G, T3CKI (alternate), interrupt-on-change IOCB5 and weak pull-up.
24 RB6 bidirectional General-purpose I/O port pin RB6 with interrupt-on-change IOCB6, weak pull-up and PGC programming clock.
25 RB7 bidirectional General-purpose I/O port pin RB7 with interrupt-on-change IOCB7, weak pull-up and PGD programming data.
26 MCLR/VPP/RE3 input Master Clear reset input, VPP programming voltage, or RE3 digital input only (no output functionality); has weak pull-up.
27 RA0 bidirectional General-purpose I/O port pin RA0 with AN0 analog input and C12IN0- comparator input.
28 RA1 bidirectional General-purpose I/O port pin RA1 with AN1 analog input, C12IN1- comparator input and CTCMP.
29 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-28-EP(6x6)
Category Single Chip Microcomputer/Microcontroller
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating voltage range (F devices) VDD 2.3 5.5 V F devices: 2.3V to 5.5V 1
Flash program memory endurance 10000 cycles Flash Program Memory of 10,000 Erase/Write Cycles Minimum 1
Flash data retention 20 years 20-year Data Retention 1
Internal oscillator factory calibration accuracy -1 1 % Factory calibrated to ± 1% 1
Internal oscillator self-tune accuracy 0.2 % Self-tune to ± 0.20% max. from USB or secondary oscillator 1
I/O pin sink/source current 25 mA High-current Sink/Source 25 mA/25 mA 1
Sleep mode current 20 nA Sleep mode: 20 nA, typical 1
Watchdog Timer current 300 nA Watchdog Timer: 300 nA, typical 1
Timer1 oscillator current 800 nA @ 32 kHz 1

CAD (KiCad official)

  • Symbol: PIC18F25K50T-I
  • Footprint: Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm
  • 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
  • 3D model files: pic18f25k50t-i-etched.step / pic18f25k50t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f25k50t-i.step / pic18f25k50t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (10 pp, sha256 22d4b8b8ff6ad4e4, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF