3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC18F25K40T-I
Microchip Tech · MICROCHIP · SSOP-28-208mil
PIC18F25K40T-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | Input-only pin that serves as the MCLR/VPP function when MCLR is enabled and as interrupt-on-change input IOCE3, with a weak pull-up available. |
| 2 | RA0 | bidirectional | General-purpose I/O with analog input ANA0, comparator inputs C1IN0- and C2IN0-, and interrupt-on-change IOCA0. |
| 3 | RA1 | bidirectional | General-purpose I/O with analog input ANA1, comparator inputs C1IN1- and C2IN1-, and interrupt-on-change IOCA1. |
| 4 | RA2 | bidirectional | General-purpose I/O with analog input ANA2, DAC1OUT1, the Vref- reference for the DAC and ADC, comparator inputs C1IN0+ and C2IN0+, and interrupt-on-change IOCA2. |
| 5 | RA3 | bidirectional | General-purpose I/O with analog input ANA3, the Vref+ reference for the DAC and ADC, comparator input C1IN1+, DSM carrier-low input MDCARL (PPS), and interrupt-on-change IOCA3. |
| 6 | RA4 | bidirectional | General-purpose I/O with analog input ANA4, Timer0 clock input T0CKI (PPS), DSM carrier-high input MDCARH (PPS), and interrupt-on-change IOCA4. |
| 7 | RA5 | bidirectional | General-purpose I/O with analog input ANA5, DSM source input MDSRC (PPS), MSSP1 slave select SS1 (PPS), and interrupt-on-change IOCA5. |
| 8 | VSS | power_in | Ground reference for the logic and I/O pins (second VSS pin on this package). |
| 9 | RA7/OSC1/CLKIN | bidirectional | General-purpose I/O with analog input ANA7, oscillator input OSC1/CLKIN in the oscillator modes that use it, and interrupt-on-change IOCA7. |
| 10 | RA6/OSC2/CLKOUT | bidirectional | General-purpose I/O with analog input ANA6, oscillator output OSC2 or CLKOUT, and interrupt-on-change IOCA6. |
| 11 | RC0/SOSCO | bidirectional | General-purpose I/O with analog input ANC0, Timer1/Timer3 clock and gate inputs (T1CKI, T3CKI, T3G, PPS), secondary oscillator output SOSCO, and interrupt-on-change IOCC0. |
| 12 | RC1/SOSCI | bidirectional | General-purpose I/O with analog input ANC1, CCP2 (PPS), secondary oscillator input SOSCI, and interrupt-on-change IOCC1. |
| 13 | RC2 | bidirectional | General-purpose I/O with analog input ANC2, Timer5 clock input T5CKI (PPS), CCP1 (PPS), and interrupt-on-change IOCC2. |
| 14 | RC3 | bidirectional | General-purpose I/O with analog input ANC3, Timer2 input T2IN (PPS), MSSP1 clock SCK1/SCL1 (I2C-compatible levels), and interrupt-on-change IOCC3. |
| 15 | RC4 | bidirectional | General-purpose I/O with analog input ANC4, MSSP1 data input SDI1/SDA1 (I2C-compatible levels), and interrupt-on-change IOCC4. |
| 16 | RC5 | bidirectional | General-purpose I/O with analog input ANC5, Timer4 input T4IN (PPS), and interrupt-on-change IOCC5. |
| 17 | RC6 | bidirectional | General-purpose I/O with analog input ANC6, EUSART1 clock CK1 (PPS), and interrupt-on-change IOCC6. |
| 18 | RC7 | bidirectional | General-purpose I/O with analog input ANC7, EUSART1 receive/data RX1/DT1 (PPS), and interrupt-on-change IOCC7. |
| 19 | VSS | power_in | Ground reference for the logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for the logic and I/O pins; the PIC18F25K40 is specified for 2.3V to 5.5V (PIC18LF25K40: 1.8V to 3.6V). |
| 21 | RB0 | bidirectional | General-purpose I/O with analog input ANB0, comparator input C2IN1+, CWG1 input (PPS), ZCD input ZCDIN, external interrupt INT0 (PPS), and interrupt-on-change IOCB0. |
| 22 | RB1 | bidirectional | General-purpose I/O with analog input ANB1, comparator inputs C1IN3- and C2IN3-, external interrupt INT1 (PPS), and interrupt-on-change IOCB1. |
| 23 | RB2 | bidirectional | General-purpose I/O with analog input ANB2, external interrupt INT2 (PPS), and interrupt-on-change IOCB2. |
| 24 | RB3 | bidirectional | General-purpose I/O with analog input ANB3, comparator inputs C1IN2- and C2IN2-, and interrupt-on-change IOCB3. |
| 25 | RB4 | bidirectional | General-purpose I/O with analog input ANB4, Timer5 gate input T5G (PPS), and interrupt-on-change IOCB4. |
| 26 | RB5 | bidirectional | General-purpose I/O with analog input ANB5, Timer1 gate input T1G (PPS), and interrupt-on-change IOCB5. |
| 27 | RB6/ICSPCLK | bidirectional | General-purpose I/O with analog input ANB6, in-circuit serial programming clock ICSPCLK, and interrupt-on-change IOCB6. |
| 28 | RB7/ICSPDAT | bidirectional | General-purpose I/O with analog input ANB7, DAC1OUT2, Timer6 input T6IN (PPS), in-circuit serial programming data ICSPDAT, and interrupt-on-change IOCB7. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VDD pin with respect to VSS (PIC18F24/25K40) | -0.3 | 6.5 | V | on VDD pin, PIC18F24/25K40 | 645 | ||
| Voltage on MCLR pin with respect to VSS | -0.3 | 9 | V | 645 | |||
| Voltage on all other pins with respect to VSS | -0.3 | V | max printed as (VDD + 0.3V) | 645 | |||
| Maximum current on VSS pin | 350 | mA | -40°C ≤ TA ≤ +85°C | 645 | |||
| Maximum current on VSS pin | 120 | mA | 85°C < TA ≤ +125°C | 645 | |||
| Maximum current on VDD pin for 28-pin devices | 250 | mA | -40°C ≤ TA ≤ +85°C | 645 | |||
| Maximum current on VDD pin for 28-pin devices | 85 | mA | 85°C < TA ≤ +125°C | 645 | |||
| Maximum current on any standard I/O pin | -50 | 50 | mA | 645 | |||
| Clamp current | IK | -20 | 20 | mA | VPIN < 0 or VPIN > VDD | 645 | |
| Total power dissipation | 800 | mW | 645 | ||||
| Ambient temperature under bias | -40 | 125 | °C | 645 | |||
| Storage temperature | -65 | 150 | °C | 645 | |||
| Supply voltage VDD (PIC18F) | VDD | 2.3 | 5.5 | V | FOSC ≤ 16 MHz | 647 | |
| Supply voltage VDD (PIC18F) | VDD | 2.5 | 5.5 | V | FOSC > 16 MHz | 647 | |
| Supply voltage VDD (PIC18F) | VDD | 3 | 5.5 | V | FOSC > 32 MHz | 647 | |
| RAM data retention voltage | VDR | 1.7 | V | Device in Sleep mode | 647 | ||
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | BOR or LPBOR disabled | 648 | ||
| Operating ambient temperature range, Industrial | TA | -40 | 85 | °C | Industrial temperature range (-I) | 646 | |
| Thermal resistance junction to ambient, 28-pin SSOP package | θJA | 90 | °C/W | 28-pin SSOP package | 653 | ||
| Thermal resistance junction to case, 28-pin SSOP package | θJC | 24 | °C/W | 28-pin SSOP package | 654 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 654 | |||
| Supply current, XT oscillator | IDDXT4 | 550 | 750 | μA | XT = 4 MHz; VDD 3.0V | 649 | |
| Supply current, HFINTOSC | IDDHFO16 | 2 | 2.7 | mA | HFINTOSC = 16 MHz; VDD 3.0V | 649 | |
| Supply current, HFINTOSC PLL | IDDHFOPLL | 7.5 | 9.5 | mA | HFINTOSC = 64 MHz; VDD 3.0V | 649 | |
| Supply current, HS+PLL | IDDHSPLL64 | 7 | 9 | mA | HS+PLL = 64 MHz; VDD 3.0V | 649 | |
| IPD base (Max +85°C) | IPD | 0.4 | 4 | μA | VREGPM = 1; VDD 3.0V; max at +85°C | 651 | |
| IPD base (Max +125°C) | IPD | 0.4 | 12 | μA | VREGPM = 1; VDD 3.0V; max at +125°C | 651 | |
| IPD Low-Frequency Internal Oscillator/WDT (Max +85°C) | IPD_WDT | 0.6 | 5 | μA | VREGPM = 1; VDD 3.0V; max at +85°C | 651 | |
| IPD Low-Frequency Internal Oscillator/WDT (Max +125°C) | IPD_WDT | 0.6 | 13 | μA | VREGPM = 1; VDD 3.0V; max at +125°C | 651 | |
| IPD Secondary Oscillator (SOSC) (Max +85°C) | IPD_SOSC | 0.8 | 8.5 | μA | VREGPM = 1; VDD 3.0V; max at +85°C | 651 | |
| IPD Secondary Oscillator (SOSC) (Max +125°C) | IPD_SOSC | 0.8 | 15 | μA | VREGPM = 1; VDD 3.0V; max at +125°C | 651 | |
| IPD Low-Power Brown-out Reset (LPBOR) (Max +85°C) | IPD_LPBOR | 0.7 | 5 | μA | VREGPM = 1; VDD 3.0V; max at +85°C | 651 | |
| IPD Low-Power Brown-out Reset (LPBOR) (Max +125°C) | IPD_LPBOR | 0.7 | 13 | μA | VREGPM = 1; VDD 3.0V; max at +125°C | 651 | |
| IPD FVR (Max +85°C) | IPD_FVR | 32 | 53 | μA | VREGPM = 1; VDD 3.0V; FVRCON = 0x81 or 0x84; max at +85°C | 651 | |
| IPD FVR (Max +125°C) | IPD_FVR | 32 | 62 | μA | VREGPM = 1; VDD 3.0V; FVRCON = 0x81 or 0x84; max at +125°C | 651 | |
| IPD Brown-out Reset (BOR) (Max +85°C) | IPD_BOR | 14 | 19 | μA | VREGPM = 1; VDD 3.0V; max at +85°C | 651 | |
| IPD Brown-out Reset (BOR) (Max +125°C) | IPD_BOR | 14 | 21 | μA | VREGPM = 1; VDD 3.0V; max at +125°C | 651 | |
| IPD Comparator (Max +85°C) | IPD_CMP | 31 | 47 | μA | VREGPM = 1; VDD 3.0V; max at +85°C | 651 | |
| IPD Comparator (Max +125°C) | IPD_CMP | 31 | 50 | μA | VREGPM = 1; VDD 3.0V; max at +125°C | 651 | |
| Input low voltage, I/O with TTL buffer | VIL | 0.8 | V | 4.5V≤VDD≤5.5V | 652 | ||
| Input low voltage, I/O with Schmitt Trigger buffer | VIL | 0.2 | VDD | 2.0V≤VDD≤5.5V | 652 | ||
| Input low voltage, I/O with I2C levels | VIL | 0.3 | VDD | 2.0V≤VDD≤5.5V | 652 | ||
| Input low voltage, I/O with SMBus levels | VIL | 0.8 | V | 2.7V≤VDD≤5.5V | 652 | ||
| Input low voltage, MCLR | VIL | 0.2 | VDD | MCLR | 652 | ||
| Input high voltage, I/O with TTL buffer | VIH | 2 | V | 4.5V≤VDD≤5.5V | 652 | ||
| Input high voltage, I/O with Schmitt Trigger buffer | VIH | 0.8 | VDD | 2.0V≤VDD≤5.5V | 652 | ||
| Input high voltage, I/O with I2C levels | VIH | 0.7 | VDD | 652 | |||
| Input high voltage, I/O with SMBus levels | VIH | 2.1 | V | 2.7V≤VDD≤5.5V | 652 | ||
| Input high voltage, MCLR | VIH | 0.7 | VDD | MCLR | 652 | ||
| Input leakage current, I/O ports (85°C) | IIL | -125 | 5 | 125 | nA | VSS≤VPIN≤VDD, pin at high-impedance, 85°C | 652 |
| Input leakage current, I/O ports (125°C) | IIL | -1000 | 5 | 1000 | nA | VSS≤VPIN≤VDD, pin at high-impedance, 125°C | 652 |
| Input leakage current, MCLR (85°C) | IIL | -200 | 50 | 200 | nA | VSS≤VPIN≤VDD, pin at high-impedance, 85°C | 652 |
| Weak pull-up current | IPUR | 25 | 120 | 200 | μA | VDD=3.0V, VPIN=VSS | 652 |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL=10.0 mA, VDD=3.0V | 652 | ||
| Capacitance, all I/O pins | CIO | 5 | 50 | pF | All I/O pins | 652 | |
| Integral error (ADC) | EIL | -1 | 0.1 | 1 | LSb | ADCREF+=3.0V, ADCREF- = 0V; VDD = 3.0V, TA = 25°C, TAD = 1μs | 661 |
| Offset error (ADC) | EOFF | -2.5 | 0.5 | 2.5 | LSb | ADCREF+=3.0V, ADCREF- = 0V; VDD = 3.0V, TA = 25°C, TAD = 1μs | 661 |
| Comparator hysteresis | VHYST | 10 | 25 | 40 | mV | VDD = 3.0V, TA = 25°C | 663 |
| Comparator response time, rising edge | TRESP | 300 | 600 | ns | VDD = 3.0V, TA = 25°C; response measured with one input at VDD/2 | 663 | |
| Fixed voltage reference, 1x gain (1.024V) | VFVR1 | -4 | 4 | % | 1x Gain (1.024V); VDD≥2.5V, -40°C to 85°C | 663 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | body RxyPPS | 276 |
CAD (KiCad official)
- Symbol:
PIC18F25K40T-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic18f25k40t-i-ss-etched.step/pic18f25k40t-i-ss-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f25k40t-i-ss.step/pic18f25k40t-i-ss.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (720 pp, sha256
043510e914313694, retrieved 2026-11-18) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).