component
PIC18F25K22-I
Public Made by Adomby adom
Microchip Tech MICROCHIP, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18F25K22-I
Microchip Tech · MICROCHIP · SSOP-28-208mil
PIC18F25K22-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/VPP/MCLR | input | Digital input-only RE3, active-low Master Clear (device Reset) input, and programming voltage (VPP) input. |
| 2 | RA0/C12IN0-/AN0 | bidirectional | PORTA bit 0 digital I/O (TTL), comparators C1/C2 inverting input C12IN0-, and analog input 0. |
| 3 | RA1/C12IN1-/AN1 | bidirectional | PORTA bit 1 digital I/O (TTL), comparators C1/C2 inverting input C12IN1-, and analog input 1. |
| 4 | RA2/C2IN+/AN2/DACOUT/VREF- | bidirectional | PORTA bit 2 digital I/O (TTL), comparator C2 noninverting input, analog input 2, DAC reference output, and A/D low reference voltage input. |
| 5 | RA3/C1IN+/AN3/VREF+ | bidirectional | PORTA bit 3 digital I/O (TTL), comparator C1 noninverting input, analog input 3, and A/D high reference voltage input. |
| 6 | RA4/CCP5/C1OUT/SRQ/T0CKI | bidirectional | PORTA bit 4 digital I/O (Schmitt Trigger) shared with CCP5, comparator C1 output, SR latch Q output and Timer0 external clock input. |
| 7 | RA5/C2OUT/SRNQ/SS1/HLVDIN/AN4 | bidirectional | PORTA bit 5 digital I/O (TTL), comparator C2 output, SR latch output, MSSP1 SPI client select input, High/Low-Voltage Detect input, and analog input 4. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | RA7/CLKI/OSC1 | bidirectional | PORTA bit 7 digital I/O, external clock source input, or oscillator crystal input (ST in RC mode, CMOS otherwise). |
| 10 | RA6/CLKO/OSC2 | bidirectional | PORTA bit 6 digital I/O, FOSC/4 clock output in RC mode, or oscillator crystal output. |
| 11 | RC0/P2B/T3CKI/T3G/T1CKI/SOSCO | bidirectional | PORTC bit 0 digital I/O with alternate P2B PWM output, Timer3 clock input and gate input, Timer1 clock input, and secondary oscillator output. |
| 12 | RC1/P2A/CCP2/SOSCI | bidirectional | PORTC bit 1 digital I/O with ECCP2 P2A PWM output, CCP2 capture/compare/PWM, and secondary oscillator input. |
| 13 | RC2/CTPLS/P1A/CCP1/T5CKI/AN14 | bidirectional | PORTC bit 2 digital I/O with CTMU pulse generator output, ECCP1 P1A/CCP1, Timer5 clock input, and analog input 14. |
| 14 | RC3/SCK1/SCL1/AN15 | bidirectional | PORTC bit 3 digital I/O, MSSP1 SPI clock or I2C clock, and analog input 15. |
| 15 | RC4/SDI1/SDA1/AN16 | bidirectional | PORTC bit 4 digital I/O, MSSP1 SPI data in or I2C data, and analog input 16. |
| 16 | RC5/SDO1/AN17 | bidirectional | PORTC bit 5 digital I/O, MSSP1 SPI data out, and analog input 17. |
| 17 | RC6/P3A/CCP3/TX1/CK1/AN18 | bidirectional | PORTC bit 6 digital I/O, EUSART1 asynchronous transmit or synchronous clock, alternate P3A/CCP3 pin, and analog input 18. |
| 18 | RC7/P3B/RX1/DT1/AN19 | bidirectional | PORTC bit 7 digital I/O, EUSART1 asynchronous receive or synchronous data, P3B PWM output, and analog input 19. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT0/CCP4/FLT0/SRI/SS2/AN12 | bidirectional | PORTB bit 0 digital I/O (TTL) with external interrupt 0, CCP4, ECCP fault input, SR latch input, MSSP2 client select, and analog input 12. |
| 22 | RB1/INT1/P1C/SCK2/SCL2/C12IN3-/AN10 | bidirectional | PORTB bit 1 digital I/O (TTL) with external interrupt 1, P1C PWM output, MSSP2 SPI/I2C clock, comparator inverting input, and analog input 10. |
| 23 | RB2/INT2/CTED1/P1B/SDI2/SDA2/AN8 | bidirectional | PORTB bit 2 digital I/O (TTL) with external interrupt 2, CTMU edge 1 input, P1B PWM output, MSSP2 SPI data in/I2C data, and analog input 8. |
| 24 | RB3/CTED2/P2A/CCP2/SDO2/C12IN2-/AN9 | bidirectional | PORTB bit 3 digital I/O (TTL) with CTMU edge 2 input, P2A/CCP2 (alternate), MSSP2 SPI data out, comparator inverting input, and analog input 9. |
| 25 | RB4/IOC0/P1D/T5G/AN11 | bidirectional | PORTB bit 4 digital I/O (TTL) with interrupt-on-change, P1D PWM output, Timer5 gate input, and analog input 11. |
| 26 | RB5/IOC1/P2B/P3A/CCP3/T3CKI/T1G/AN13 | bidirectional | PORTB bit 5 digital I/O (TTL) with interrupt-on-change, default P2B/P3A/CCP3, alternate T3CKI, Timer1 gate input, and analog input 13. |
| 27 | RB6/IOC2/TX2/CK2/PGC | bidirectional | PORTB bit 6 digital I/O (TTL) with interrupt-on-change, EUSART2 transmit/clock, and In-Circuit Debugger/ICSP programming clock. |
| 28 | RB7/IOC3/RX2/DT2/PGD | bidirectional | PORTB bit 7 digital I/O (TTL) with interrupt-on-change, EUSART2 receive/data, and In-Circuit Debugger/ICSP programming data. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage PIC18F2X/4XK22 | VDD | 2.3 | 5.5 | V | PIC18F2X/4XK22 | 417 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | 417 | |||
| VDD Start Voltage to ensure internal Power-on Reset | VPOR | 0.7 | V | See section on Power-on Reset for details | 417 | ||
| VDD Rise Rate to ensure internal Power-on Reset | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 417 | ||
| Brown-out Reset Voltage | VBOR | 1.75 | 1.9 | 2.05 | V | BORV<1:0> = 11 | 417 |
| Brown-out Reset Voltage | VBOR | 2.05 | 2.2 | 2.35 | V | BORV<1:0> = 10 | 417 |
| Brown-out Reset Voltage | VBOR | 2.35 | 2.5 | 2.65 | V | BORV<1:0> = 01 | 417 |
| Brown-out Reset Voltage | VBOR | 2.65 | 2.85 | 3.05 | V | BORV<1:0> = 00 | 417 |
| Sleep mode power-down current, max +85°C | IPD | 13 | 25 | µA | VDD = 2.3V, typ at +25°C, max at +85°C | 418 | |
| Sleep mode power-down current, max +125°C | IPD | 13 | 35 | µA | VDD = 2.3V, typ at +25°C, max at +125°C | 418 | |
| Sleep mode power-down current, max +85°C | IPD | 13 | 35 | µA | VDD = 5.0V, typ at +25°C, max at +85°C | 418 | |
| Sleep mode power-down current, max +125°C | IPD | 13 | 50 | µA | VDD = 5.0V, typ at +25°C, max at +125°C | 418 | |
| Watchdog Timer delta current | ΔIPD | 0.5 | 5 | µA | VDD = 5.0V, max at +85°C/+125°C | 418 | |
| Brown-out Reset delta current | ΔIPD | 5.2 | 15 | µA | VDD = 5.0V, max at +85°C | 418 | |
| Supply Current RC_RUN LFINTOSC 31 kHz | IDD | 19 | 55 | µA | -40°C, VDD = 5.0V, FOSC = 31 kHz | 420 | |
| Supply Current RC_RUN MFINTOSC 500 kHz | IDD | 0.25 | 0.35 | mA | -40°C to +125°C, VDD = 5.0V, FOSC = 500 kHz | 420 | |
| Supply Current RC_RUN HFINTOSC 1 MHz | IDD | 0.55 | 0.75 | mA | -40°C to +125°C, VDD = 5.0V, FOSC = 1 MHz | 421 | |
| Supply Current RC_RUN HFINTOSC 16 MHz | IDD | 2.5 | 3.5 | mA | -40°C to +125°C, VDD = 5.0V, FOSC = 16 MHz | 421 | |
| Supply Current RC_RUN HFINTOSC+PLL 64 MHz | IDD | 6.8 | 9.5 | mA | -40°C to +125°C, VDD = 5.0V, FOSC = 64 MHz | 421 | |
| Ambient temperature under bias | -40 | 125 | °C | 414 | |||
| Storage temperature | -65 | 150 | °C | 414 | |||
| Voltage on any pin with respect to VSS (except VDD and MCLR) | -0.3 | V | max is VDD + 0.3V | 414 | |||
| Voltage on MCLR with respect to VSS | 0 | 11 | V | Note 2 | 414 | ||
| Total power dissipation | 1 | W | Note 1 | 414 | |||
| Maximum current out of VSS pin | 300 | mA | -40°C to +85°C | 414 | |||
| Maximum current out of VSS pin | 125 | mA | +85°C to +125°C | 414 | |||
| Maximum current into VDD pin | 200 | mA | -40°C to +85°C | 414 | |||
| Maximum current into VDD pin | 85 | mA | +85°C to +125°C | 414 | |||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 414 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 414 | ||
| Maximum current sunk by all ports | 200 | mA | -40°C to +85°C | 414 | |||
| Operating temperature | TA | -40 | 125 | °C | Standard Operating Conditions | 417 |
CAD (KiCad official)
- Symbol:
PIC18F25K22-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic18f25k22-i-etched.step/pic18f25k22-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f25k22-i.step/pic18f25k22-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (539 pp, sha256
d0ba745eb6a13bdb, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).