main
Ray
Publish 0.1.0
0215f2b
PIC18F2523-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)
PIC18F2523-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/AN2/VREF-/CVREF | bidirectional | Digital I/O (TTL), Analog Input 2, A/D reference voltage (low) input, or comparator reference voltage output. |
| 2 | RA3/AN3/VREF+ | bidirectional | Digital I/O (TTL), Analog Input 3, or A/D reference voltage (high) input. |
| 3 | RA4/T0CKI/C1OUT | bidirectional | Digital I/O (ST), Timer0 external clock input, or Comparator 1 output. |
| 4 | RA5/AN4/SS/HLVDIN/C2OUT | bidirectional | Digital I/O (TTL), Analog Input 4, SPI slave select input, High/Low-Voltage Detect input, or Comparator 2 output. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock source input (ST in RC mode, CMOS otherwise), or general purpose I/O RA7. |
| 7 | OSC2/CLKO/RA6 | output | Oscillator crystal output, or CLKO at 1/4 the OSC1 frequency in RC mode, or general purpose I/O RA6. |
| 8 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O (ST), Timer1 oscillator output, or Timer1/Timer3 external clock input. |
| 9 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O, Timer1 oscillator input, or Capture 2 input/Compare 2 output/PWM2 output (alternate assignment when CCP2MX is cleared). |
| 10 | RC2/CCP1 | bidirectional | Digital I/O (ST) or Capture 1 input/Compare 1 output/PWM1 output. |
| 11 | RC3/SCK/SCL | bidirectional | Digital I/O (ST) or synchronous serial clock input/output for SPI mode (SCK) and I2C mode (SCL). |
| 12 | RC4/SDI/SDA | bidirectional | Digital I/O (ST), SPI data in, or I2C data I/O. |
| 13 | RC5/SDO | bidirectional | Digital I/O (ST) or SPI data out. |
| 14 | RC6/TX/CK | bidirectional | Digital I/O (ST), EUSART asynchronous transmit, or EUSART synchronous clock. |
| 15 | RC7/RX/DT | bidirectional | Digital I/O (ST), EUSART asynchronous receive, or EUSART synchronous data. |
| 16 | VSS | power_in | Ground reference for logic and I/O pins. |
| 17 | VDD | power_in | Positive supply for logic and I/O pins. |
| 18 | RB0/INT0/FLT0/AN12 | bidirectional | Digital I/O (TTL), External Interrupt 0, PWM Fault input for CCP1, or Analog Input 12; PORTB has software-programmable weak pull-ups. |
| 19 | RB1/INT1/AN10 | bidirectional | Digital I/O (TTL), External Interrupt 1, or Analog Input 10. |
| 20 | RB2/INT2/AN8 | bidirectional | Digital I/O (TTL), External Interrupt 2, or Analog Input 8. |
| 21 | RB3/AN9/CCP2 | bidirectional | Digital I/O (TTL), Analog Input 9, or Capture 2 input/Compare 2 output/PWM2 output (default assignment when CCP2MX is set). |
| 22 | RB4/KBI0/AN11 | bidirectional | Digital I/O (TTL), interrupt-on-change pin, or Analog Input 11. |
| 23 | RB5/KBI1/PGM | bidirectional | Digital I/O (TTL), interrupt-on-change pin, or Low-Voltage ICSP programming enable pin. |
| 24 | RB6/KBI2/PGC | bidirectional | Digital I/O (TTL), interrupt-on-change pin, or In-Circuit Debugger and ICSP programming clock pin. |
| 25 | RB7/KBI3/PGD | bidirectional | Digital I/O (TTL), interrupt-on-change pin, or In-Circuit Debugger and ICSP programming data pin. |
| 26 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input, programming voltage input, or digital input RE3 when MCLR is disabled. |
| 27 | RA0/AN0 | bidirectional | Digital I/O (TTL) or Analog Input 0. |
| 28 | RA1/AN1 | bidirectional | Digital I/O (TTL) or Analog Input 1. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-28-EP(6x6) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 37 | |||
| Storage temperature | -65 | 150 | °C | 37 | |||
| Voltage on any pin with respect to VSS (except VDD and MCLR) | -0.3 | V | Max printed as VDD + 0.3V | 37 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 7.5 | V | 37 | ||
| Voltage on MCLR with respect to VSS | 0 | 13.25 | V | Note 2 | 37 | ||
| Total power dissipation | 1 | W | Note 1 | 37 | |||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VDD | 37 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 37 | |
| Maximum output current sunk by any I/O pin | 25 | mA | 37 | ||||
| Maximum output current sourced by any I/O pin | 25 | mA | 37 | ||||
| Resolution | NR | 12 | bit | ΔVREF ≥ 3.0V | 40 | ||
| Integral Linearity Error | EIL | -2 | 2 | LSB | VDD = 3.0V, ΔVREF ≥ 3.0V | 40 | |
| Differential Linearity Error | EDL | -1 | 1.5 | LSB | VDD = 3.0V, ΔVREF ≥ 3.0V | 40 | |
| Offset Error | EOFF | -5 | 5 | LSB | VDD = 3.0V, ΔVREF ≥ 3.0V | 40 | |
| Offset Error | EOFF | -3 | 3 | LSB | VDD = 5.0V | 40 | |
| Gain Error | EGN | -1.25 | 1.25 | LSB | VDD = 3.0V, ΔVREF ≥ 3.0V | 40 | |
| Gain Error | EGN | -2 | 2 | LSB | VDD = 5.0V | 40 | |
| Reference Voltage Range (VREFH, VREFL) | ΔVREF | 3 | V | For 12-bit resolution. Max printed as VDD, VSS | 40 | ||
| Recommended Impedance of Analog Voltage Source | ZAIN | 2.5 | kΩ | 40 | |||
| VREF Input Current | IREF | 5 | μA | During VAIN acquisition | 40 | ||
| VREF Input Current | IREF | 150 | μA | During A/D conversion cycle | 40 | ||
| A/D Clock Period (PIC18FXXXX) | TAD | 0.8 | 12.5 | μs | TOSC based, VREF ≥ 3.0V | 41 | |
| A/D Clock Period (PIC18FXXXX, RC mode) | TAD | 1 | μs | A/D RC mode | 41 | ||
| Conversion Time (not including acquisition time) | TCNV | 13 | 14 | TAD | 41 | ||
| Acquisition Time | TACQ | 1.4 | μs | 41 | |||
| Discharge Time | TDIS | 0.2 | μs | 41 |
CAD (KiCad official)
- Symbol:
PIC18F2523-I - Footprint:
Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm - 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
pic18f2523-i-etched.step/pic18f2523-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f2523-i.step/pic18f2523-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (54 pp, sha256
0b4127f02fa6dda7, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC18F2523-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)
PIC18F2523-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/AN2/VREF-/CVREF | bidirectional | Digital I/O (TTL), Analog Input 2, A/D reference voltage (low) input, or comparator reference voltage output. |
| 2 | RA3/AN3/VREF+ | bidirectional | Digital I/O (TTL), Analog Input 3, or A/D reference voltage (high) input. |
| 3 | RA4/T0CKI/C1OUT | bidirectional | Digital I/O (ST), Timer0 external clock input, or Comparator 1 output. |
| 4 | RA5/AN4/SS/HLVDIN/C2OUT | bidirectional | Digital I/O (TTL), Analog Input 4, SPI slave select input, High/Low-Voltage Detect input, or Comparator 2 output. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock source input (ST in RC mode, CMOS otherwise), or general purpose I/O RA7. |
| 7 | OSC2/CLKO/RA6 | output | Oscillator crystal output, or CLKO at 1/4 the OSC1 frequency in RC mode, or general purpose I/O RA6. |
| 8 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O (ST), Timer1 oscillator output, or Timer1/Timer3 external clock input. |
| 9 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O, Timer1 oscillator input, or Capture 2 input/Compare 2 output/PWM2 output (alternate assignment when CCP2MX is cleared). |
| 10 | RC2/CCP1 | bidirectional | Digital I/O (ST) or Capture 1 input/Compare 1 output/PWM1 output. |
| 11 | RC3/SCK/SCL | bidirectional | Digital I/O (ST) or synchronous serial clock input/output for SPI mode (SCK) and I2C mode (SCL). |
| 12 | RC4/SDI/SDA | bidirectional | Digital I/O (ST), SPI data in, or I2C data I/O. |
| 13 | RC5/SDO | bidirectional | Digital I/O (ST) or SPI data out. |
| 14 | RC6/TX/CK | bidirectional | Digital I/O (ST), EUSART asynchronous transmit, or EUSART synchronous clock. |
| 15 | RC7/RX/DT | bidirectional | Digital I/O (ST), EUSART asynchronous receive, or EUSART synchronous data. |
| 16 | VSS | power_in | Ground reference for logic and I/O pins. |
| 17 | VDD | power_in | Positive supply for logic and I/O pins. |
| 18 | RB0/INT0/FLT0/AN12 | bidirectional | Digital I/O (TTL), External Interrupt 0, PWM Fault input for CCP1, or Analog Input 12; PORTB has software-programmable weak pull-ups. |
| 19 | RB1/INT1/AN10 | bidirectional | Digital I/O (TTL), External Interrupt 1, or Analog Input 10. |
| 20 | RB2/INT2/AN8 | bidirectional | Digital I/O (TTL), External Interrupt 2, or Analog Input 8. |
| 21 | RB3/AN9/CCP2 | bidirectional | Digital I/O (TTL), Analog Input 9, or Capture 2 input/Compare 2 output/PWM2 output (default assignment when CCP2MX is set). |
| 22 | RB4/KBI0/AN11 | bidirectional | Digital I/O (TTL), interrupt-on-change pin, or Analog Input 11. |
| 23 | RB5/KBI1/PGM | bidirectional | Digital I/O (TTL), interrupt-on-change pin, or Low-Voltage ICSP programming enable pin. |
| 24 | RB6/KBI2/PGC | bidirectional | Digital I/O (TTL), interrupt-on-change pin, or In-Circuit Debugger and ICSP programming clock pin. |
| 25 | RB7/KBI3/PGD | bidirectional | Digital I/O (TTL), interrupt-on-change pin, or In-Circuit Debugger and ICSP programming data pin. |
| 26 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input, programming voltage input, or digital input RE3 when MCLR is disabled. |
| 27 | RA0/AN0 | bidirectional | Digital I/O (TTL) or Analog Input 0. |
| 28 | RA1/AN1 | bidirectional | Digital I/O (TTL) or Analog Input 1. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-28-EP(6x6) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 29 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | | -40 | | 125 | °C | | 37 |
| Storage temperature | | -65 | | 150 | °C | | 37 |
| Voltage on any pin with respect to VSS (except VDD and MCLR) | | -0.3 | | | V | Max printed as VDD + 0.3V | 37 |
| Voltage on VDD with respect to VSS | VDD | -0.3 | | 7.5 | V | | 37 |
| Voltage on MCLR with respect to VSS | | 0 | | 13.25 | V | Note 2 | 37 |
| Total power dissipation | | | | 1 | W | Note 1 | 37 |
| Input clamp current | IIK | -20 | | 20 | mA | VI < 0 or VI > VDD | 37 |
| Output clamp current | IOK | -20 | | 20 | mA | VO < 0 or VO > VDD | 37 |
| Maximum output current sunk by any I/O pin | | | | 25 | mA | | 37 |
| Maximum output current sourced by any I/O pin | | | | 25 | mA | | 37 |
| Resolution | NR | | | 12 | bit | ΔVREF ≥ 3.0V | 40 |
| Integral Linearity Error | EIL | -2 | | 2 | LSB | VDD = 3.0V, ΔVREF ≥ 3.0V | 40 |
| Differential Linearity Error | EDL | -1 | | 1.5 | LSB | VDD = 3.0V, ΔVREF ≥ 3.0V | 40 |
| Offset Error | EOFF | -5 | | 5 | LSB | VDD = 3.0V, ΔVREF ≥ 3.0V | 40 |
| Offset Error | EOFF | -3 | | 3 | LSB | VDD = 5.0V | 40 |
| Gain Error | EGN | -1.25 | | 1.25 | LSB | VDD = 3.0V, ΔVREF ≥ 3.0V | 40 |
| Gain Error | EGN | -2 | | 2 | LSB | VDD = 5.0V | 40 |
| Reference Voltage Range (VREFH, VREFL) | ΔVREF | 3 | | | V | For 12-bit resolution. Max printed as VDD, VSS | 40 |
| Recommended Impedance of Analog Voltage Source | ZAIN | | | 2.5 | kΩ | | 40 |
| VREF Input Current | IREF | | | 5 | μA | During VAIN acquisition | 40 |
| VREF Input Current | IREF | | | 150 | μA | During A/D conversion cycle | 40 |
| A/D Clock Period (PIC18FXXXX) | TAD | 0.8 | | 12.5 | μs | TOSC based, VREF ≥ 3.0V | 41 |
| A/D Clock Period (PIC18FXXXX, RC mode) | TAD | | | 1 | μs | A/D RC mode | 41 |
| Conversion Time (not including acquisition time) | TCNV | 13 | | 14 | TAD | | 41 |
| Acquisition Time | TACQ | 1.4 | | | μs | | 41 |
| Discharge Time | TDIS | 0.2 | | | μs | | 41 |
## CAD (KiCad official)
- Symbol: `PIC18F2523-I`
- Footprint: `Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm`
- 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
- 3D model files: `pic18f2523-i-etched.step` / `pic18f2523-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic18f2523-i.step` / `pic18f2523-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/39755c.pdf) (54 pp, sha256 `0b4127f02fa6dda7`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic18f2523-i-datasheet.pdf)