main
History Download
Ray Publish 0.1.0 cbe5bc4

PIC18F2520-E

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil

PIC18F2520-E from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP/RE3 input Active-low Master Clear Reset input when MCLRE is set, with VPP as the high-voltage ICSP entry detection input and RE3 as a digital input only when MCLR is disabled.
2 RA0/AN0 bidirectional Digital I/O with analog input channel 0 and comparator C1- input, the default input configuration on POR.
3 RA1/AN1 bidirectional Digital I/O with analog input channel 1 and comparator C2- input.
4 RA2/AN2/VREF-/CVREF bidirectional Digital I/O with analog input channel 2, A/D reference voltage low input VREF-, and comparator voltage reference output CVREF.
5 RA3/AN3/VREF+ bidirectional Digital I/O with analog input channel 3, comparator C1+ input, and A/D reference voltage high input VREF+.
6 RA4/T0CKI/C1OUT bidirectional Digital I/O with Schmitt Trigger input, Timer0 external clock input T0CKI, and Comparator 1 output C1OUT.
7 RA5/AN4/SS/HLVDIN/C2OUT bidirectional Digital I/O with analog input channel 4, MSSP client select input SS, High/Low-Voltage Detect input HLVDIN, and Comparator 2 output C2OUT.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKI/RA7 input Oscillator crystal or external clock input (CLKI), or general purpose I/O RA7 when an internal oscillator mode is selected.
10 OSC2/CLKO/RA6 bidirectional Oscillator crystal output or clock output (CLKO at FOSC/4 in RC mode), or general purpose I/O RA6 when not used as an oscillator pin.
11 RC0/T1OSO/T13CKI bidirectional Digital I/O with Timer1 oscillator output T1OSO and Timer1/Timer3 external clock input T13CKI.
12 RC1/T1OSI/CCP2 bidirectional Digital I/O with Timer1 oscillator input T1OSI and CCP2 capture input, compare output, or PWM output (default CCP2 pin when CCP2MX is set).
13 RC2/CCP1 bidirectional Digital I/O with CCP1 capture input, compare output, or PWM output.
14 RC3/SCK/SCL bidirectional Digital I/O with MSSP synchronous serial clock input/output for SPI mode (SCK) and I2C mode (SCL).
15 RC4/SDI/SDA bidirectional Digital I/O with MSSP SPI data input SDI and I2C data I/O SDA.
16 RC5/SDO bidirectional Digital I/O with MSSP SPI data output SDO.
17 RC6/TX/CK bidirectional Digital I/O with EUSART asynchronous transmit TX and EUSART synchronous clock CK.
18 RC7/RX/DT bidirectional Digital I/O with EUSART asynchronous receive RX and EUSART synchronous data DT.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins; standard F devices operate at 4.2V to 5.5V.
21 RB0/INT0/FLT0/AN12 bidirectional Digital I/O with weak pull-up, external interrupt INT0, PWM Fault input FLT0 for CCP1, and analog input 12.
22 RB1/INT1/AN10 bidirectional Digital I/O with weak pull-up, external interrupt INT1, and analog input 10.
23 RB2/INT2/AN8 bidirectional Digital I/O with weak pull-up, external interrupt INT2, and analog input 8.
24 RB3/AN9/CCP2 bidirectional Digital I/O with weak pull-up, analog input 9, and CCP2 capture input or compare/PWM output as the alternate CCP2 pin when CCP2MX is cleared.
25 RB4/KBI0/AN11 bidirectional Digital I/O with weak pull-up, interrupt-on-change input KBI0, and analog input 11.
26 RB5/KBI1/PGM bidirectional Digital I/O with weak pull-up, interrupt-on-change input KBI1, and Low-Voltage ICSP programming enable pin PGM.
27 RB6/KBI2/PGC bidirectional Digital I/O with weak pull-up, interrupt-on-change input KBI2, and in-circuit debugger and ICSP programming clock PGC.
28 RB7/KBI3/PGD bidirectional Digital I/O with weak pull-up, interrupt-on-change input KBI3, and in-circuit debugger and ICSP programming data PGD.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating VDD range, standard F device VDD 4.2 5.5 V Standard F device (PIC18F2520), not LF 6
Operating frequency FOSC 40 MHz Printed as DC, 40 MHz for PIC18F2520 7
External RC oscillator resistor REXT REXT 3 100 kΩ Recommended values for RC oscillator mode 22
External RC oscillator capacitor CEXT CEXT 20 pF Recommended value CEXT > 20 pF for RC oscillator mode 22

CAD (KiCad official)

  • Symbol: PIC18F2520-E
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic18f2520-e-etched.step / pic18f2520-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f2520-e.step / pic18f2520-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (383 pp, sha256 7a3ba485a1cab451, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF