PIC18F24Q10-I

{
  "schema_version": 1,
  "type": "component",
  "slug": "pic18f24q10-i",
  "title": "PIC18F24Q10-I",
  "brief": "Microchip Tech Microcontrollers (MCU/MPU/SOC), SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "pic18f24q10-i",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "PIC18F24Q10-I",
    "manufacturer": "Microchip Tech",
    "package": "SSOP-28-208mil",
    "pin_count": 28,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590209561924558848",
    "parts": {
      "symbol": "pic18f24q10-i.kicad_sym",
      "footprint": "pic18f24q10-i.kicad_mod",
      "model_3d": "pic18f24q10-i-hero.glb",
      "model_3d_plain": "pic18f24q10-i-etched.glb",
      "model_3d_step": "pic18f24q10-i-etched.step",
      "model_3d_step_plain": "pic18f24q10-i.step",
      "lbr": "pic18f24q10-i.lbr"
    },
    "distributor_links": {
      "lcsc": "C641850"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T02:37:38Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "MCLR/VPP/RE3",
        "type": "input",
        "description": "Master Clear input that holds the device in Reset while low when MCLR is enabled, with an internal weak pull-up to VDD; it is input-only and RE3 is the read-only PORTE bit on this pin."
      },
      {
        "number": "2",
        "name": "RA0",
        "type": "bidirectional",
        "description": "PORTA digital I/O pin whose direction is set by TRISA and whose analog input mode is selected by ANSELA; peripheral functions are routed through PPS."
      },
      {
        "number": "3",
        "name": "RA1",
        "type": "bidirectional",
        "description": "PORTA digital I/O pin whose direction is set by TRISA and whose analog input mode is selected by ANSELA; peripheral functions are routed through PPS."
      },
      {
        "number": "4",
        "name": "RA2",
        "type": "bidirectional",
        "description": "PORTA digital I/O pin whose direction is set by TRISA and whose analog input mode is selected by ANSELA; peripheral functions are routed through PPS."
      },
      {
        "number": "5",
        "name": "RA3",
        "type": "bidirectional",
        "description": "PORTA digital I/O pin whose direction is set by TRISA and whose analog input mode is selected by ANSELA; peripheral functions are routed through PPS."
      },
      {
        "number": "6",
        "name": "RA4",
        "type": "bidirectional",
        "description": "PORTA digital I/O pin whose direction is set by TRISA and whose analog input mode is selected by ANSELA; peripheral functions are routed through PPS."
      },
      {
        "number": "7",
        "name": "RA5",
        "type": "bidirectional",
        "description": "PORTA digital I/O pin whose direction is set by TRISA and whose analog input mode is selected by ANSELA; peripheral functions are routed through PPS."
      },
      {
        "number": "8",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference; all VSS pins must be connected and each VDD/VSS pair requires a decoupling capacitor."
      },
      {
        "number": "9",
        "name": "RA7",
        "type": "bidirectional",
        "description": "PORTA digital I/O pin whose direction is set by TRISA and whose analog input mode is selected by ANSELA; peripheral functions are routed through PPS."
      },
      {
        "number": "10",
        "name": "RA6",
        "type": "bidirectional",
        "description": "PORTA digital I/O pin whose direction is set by TRISA and whose analog input mode is selected by ANSELA; peripheral functions are routed through PPS."
      },
      {
        "number": "11",
        "name": "RC0",
        "type": "bidirectional",
        "description": "PORTC digital I/O pin whose direction is set by TRISC and whose analog input mode is selected by ANSELC; peripheral functions are routed through PPS."
      },
      {
        "number": "12",
        "name": "RC1",
        "type": "bidirectional",
        "description": "PORTC digital I/O pin whose direction is set by TRISC and whose analog input mode is selected by ANSELC; peripheral functions are routed through PPS."
      },
      {
        "number": "13",
        "name": "RC2",
        "type": "bidirectional",
        "description": "PORTC digital I/O pin whose direction is set by TRISC and whose analog input mode is selected by ANSELC; peripheral functions are routed through PPS."
      },
      {
        "number": "14",
        "name": "RC3",
        "type": "bidirectional",
        "description": "PORTC digital I/O pin whose direction is set by TRISC and whose analog input mode is selected by ANSELC; peripheral functions are routed through PPS."
      },
      {
        "number": "15",
        "name": "RC4",
        "type": "bidirectional",
        "description": "PORTC digital I/O pin whose direction is set by TRISC and whose analog input mode is selected by ANSELC; peripheral functions are routed through PPS."
      },
      {
        "number": "16",
        "name": "RC5",
        "type": "bidirectional",
        "description": "PORTC digital I/O pin whose direction is set by TRISC and whose analog input mode is selected by ANSELC; peripheral functions are routed through PPS."
      },
      {
        "number": "17",
        "name": "RC6",
        "type": "bidirectional",
        "description": "PORTC digital I/O pin whose direction is set by TRISC and whose analog input mode is selected by ANSELC; peripheral functions are routed through PPS."
      },
      {
        "number": "18",
        "name": "RC7",
        "type": "bidirectional",
        "description": "PORTC digital I/O pin whose direction is set by TRISC and whose analog input mode is selected by ANSELC; peripheral functions are routed through PPS."
      },
      {
        "number": "19",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference; all VSS pins must be connected and each VDD/VSS pair requires a decoupling capacitor."
      },
      {
        "number": "20",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply; all VDD pins must be connected and decoupled with a low-ESR ceramic capacitor, 0.1 µF (100 nF), 10-20V recommended."
      },
      {
        "number": "21",
        "name": "RB0",
        "type": "bidirectional",
        "description": "PORTB digital I/O pin whose direction is set by TRISB and whose analog input mode is selected by ANSELB; peripheral functions are routed through PPS."
      },
      {
        "number": "22",
        "name": "RB1",
        "type": "bidirectional",
        "description": "PORTB digital I/O pin whose direction is set by TRISB and whose analog input mode is selected by ANSELB; peripheral functions are routed through PPS."
      },
      {
        "number": "23",
        "name": "RB2",
        "type": "bidirectional",
        "description": "PORTB digital I/O pin whose direction is set by TRISB and whose analog input mode is selected by ANSELB; peripheral functions are routed through PPS."
      },
      {
        "number": "24",
        "name": "RB3",
        "type": "bidirectional",
        "description": "PORTB digital I/O pin whose direction is set by TRISB and whose analog input mode is selected by ANSELB; peripheral functions are routed through PPS."
      },
      {
        "number": "25",
        "name": "RB4",
        "type": "bidirectional",
        "description": "PORTB digital I/O pin whose direction is set by TRISB and whose analog input mode is selected by ANSELB; peripheral functions are routed through PPS."
      },
      {
        "number": "26",
        "name": "RB5",
        "type": "bidirectional",
        "description": "PORTB digital I/O pin whose direction is set by TRISB and whose analog input mode is selected by ANSELB; peripheral functions are routed through PPS."
      },
      {
        "number": "27",
        "name": "RB6/ICSPCLK",
        "type": "bidirectional",
        "description": "PORTB digital I/O pin that doubles as the ICSPCLK clock input for In-Circuit Serial Programming and debugging; keep the ICSP trace short and avoid pull-ups or series diodes on it."
      },
      {
        "number": "28",
        "name": "RB7/ICSPDAT",
        "type": "bidirectional",
        "description": "PORTB digital I/O pin that doubles as the ICSPDAT bidirectional serial data pin for In-Circuit Serial Programming and debugging; avoid pull-ups, series diodes or capacitors on it."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin map was taken from the garbled text extraction of Figure 1 (page 5), which is shared by the ; The excerpt does not give per-pin electrical limits or alternate-function assignments for the port p; The datasheet lists SSOP as a package for PIC18F24Q10 and PIC18F25Q10, but the excerpt does not map ",
          "24/28 pins cited to the wrong page (name found elsewhere): ['2:RA0@p220', '3:RA1@p220', '4:RA2@p220', '5:RA3@p220']"
        ],
        "pages_sent": 64,
        "cost_usd": 0.2508,
        "at": "2026-10-18T02:35:42"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590209561924558848",
        "pages": 725,
        "sha256": "e22ca20a7af480e3",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 28,
        "described": 28,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pic18f24q10-i.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pic18f24q10-i-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          10.2,
          2.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "33f5f6254795cf2345583d7d2f92b6f571d4c6a5d78798c55fbddc93d48187c1",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Microchip Tech",
      "Package": "SSOP-28-208mil",
      "Category": "Embedded Processors & Controllers",
      "Pins": "28"
    },
    "appearance": {
      "housing": {
        "quote": "body RxyPPS",
        "page": 277,
        "doc": "ds.pdf",
        "material": "PPS"
      },
      "version": 1,
      "datasheet_sha256": "e22ca20a7af480e302ec6be357494bf7a918fb6b40d42f6a48a225fab6c9406e"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "e22ca20a7af480e302ec6be357494bf7a918fb6b40d42f6a48a225fab6c9406e",
      "rows": [
        {
          "name": "Ambient temperature under bias",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 659,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 659,
          "source": "datasheet"
        },
        {
          "name": "Voltage on VDD pin with respect to VSS",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 6.5,
          "conditions": "",
          "source_page": 659,
          "source": "datasheet"
        },
        {
          "name": "Voltage on MCLR pin with respect to VSS",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 9,
          "conditions": "",
          "source_page": 659,
          "source": "datasheet"
        },
        {
          "name": "Voltage on all other pins with respect to VSS (max printed as VDD+0.3V)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 659,
          "source": "datasheet"
        },
        {
          "name": "Maximum current on VSS pin",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 350,
          "conditions": "-40°C ≤ TA ≤ +85°C",
          "source_page": 659,
          "source": "datasheet"
        },
        {
          "name": "Maximum current on VSS pin",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 120,
          "conditions": "85°C < TA ≤ +125°C",
          "source_page": 659,
          "source": "datasheet"
        },
        {
          "name": "Maximum current on VDD pin",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 250,
          "conditions": "-40°C ≤ TA ≤ +85°C",
          "source_page": 659,
          "source": "datasheet"
        },
        {
          "name": "Maximum current on VDD pin",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 85,
          "conditions": "85°C < TA ≤ +125°C",
          "source_page": 659,
          "source": "datasheet"
        },
        {
          "name": "Maximum current on any standard I/O pin",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -50,
          "typ": null,
          "max": 50,
          "conditions": "",
          "source_page": 659,
          "source": "datasheet"
        },
        {
          "name": "Clamp current IK",
          "symbol": "IK",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -20,
          "typ": null,
          "max": 20,
          "conditions": "VPIN < 0 or VPIN > VDD",
          "source_page": 659,
          "source": "datasheet"
        },
        {
          "name": "Total power dissipation",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mW",
          "min": null,
          "typ": null,
          "max": 800,
          "conditions": "",
          "source_page": 659,
          "source": "datasheet"
        },
        {
          "name": "Supply Voltage",
          "symbol": "VDD",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.8,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 660,
          "source": "datasheet"
        },
        {
          "name": "Operating Ambient Temperature Range, Industrial",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "",
          "source_page": 660,
          "source": "datasheet"
        },
        {
          "name": "RAM Data Retention voltage, device in SLEEP mode",
          "symbol": "VDR",
          "kind": "electrical",
          "unit": "V",
          "min": 1.7,
          "typ": null,
          "max": null,
          "conditions": "Device in SLEEP mode",
          "source_page": 660,
          "source": "datasheet"
        },
        {
          "name": "VDD Rise Rate to ensure internal Power-on Reset signal",
          "symbol": "SVDD",
          "kind": "electrical",
          "unit": "V/ms",
          "min": 0.05,
          "typ": null,
          "max": null,
          "conditions": "BOR or LPBOR disabled",
          "source_page": 661,
          "source": "datasheet"
        },
        {
          "name": "External clock, ECH oscillator clock frequency",
          "symbol": "FECH",
          "kind": "timing",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 64,
          "conditions": "",
          "source_page": 667,
          "source": "datasheet"
        },
        {
          "name": "LP oscillator clock frequency",
          "symbol": "FLP",
          "kind": "timing",
          "unit": "kHz",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "Note 4",
          "source_page": 667,
          "source": "datasheet"
        },
        {
          "name": "XT oscillator clock frequency",
          "symbol": "FXT",
          "kind": "timing",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 4,
          "conditions": "Note 4",
          "source_page": 667,
          "source": "datasheet"
        },
        {
          "name": "HS oscillator clock frequency",
          "symbol": "FHS",
          "kind": "timing",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 20,
          "conditions": "Note 4",
          "source_page": 667,
          "source": "datasheet"
        },
        {
          "name": "Secondary oscillator clock frequency",
          "symbol": "FSEC",
          "kind": "timing",
          "unit": "kHz",
          "min": 32.4,
          "typ": 32.768,
          "max": 33.1,
          "conditions": "Note 4",
          "source_page": 667,
          "source": "datasheet"
        },
        {
          "name": "System clock frequency",
          "symbol": "FOSC",
          "kind": "timing",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 64,
          "conditions": "Note 2, Note 3",
          "source_page": 667,
          "source": "datasheet"
        },
        {
          "name": "Instruction cycle period",
          "symbol": "TCY",
          "kind": "timing",
          "unit": "ns",
          "min": 62.5,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 668,
          "source": "datasheet"
        },
        {
          "name": "PLL input frequency range",
          "symbol": "FPLLIN",
          "kind": "timing",
          "unit": "MHz",
          "min": 4,
          "typ": null,
          "max": 16,
          "conditions": "",
          "source_page": 669,
          "source": "datasheet"
        },
        {
          "name": "PLL output frequency range",
          "symbol": "FPLLOUT",
          "kind": "timing",
          "unit": "MHz",
          "min": 16,
          "typ": null,
          "max": 64,
          "conditions": "Note 1",
          "source_page": 669,
          "source": "datasheet"
        },
        {
          "name": "Supply current, XT = 4 MHz",
          "symbol": "IDDXT4",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 440,
          "max": 700,
          "conditions": "3.0V",
          "source_page": 662,
          "source": "datasheet"
        },
        {
          "name": "Supply current, HFINTOSC = 16 MHz",
          "symbol": "IDDHFO16",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 1.2,
          "max": 1.55,
          "conditions": "3.0V",
          "source_page": 662,
          "source": "datasheet"
        },
        {
          "name": "Supply current, HFINTOSC = 64 MHz (PLL)",
          "symbol": "IDDHFOPLL",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 4,
          "max": 5.3,
          "conditions": "3.0V",
          "source_page": 662,
          "source": "datasheet"
        },
        {
          "name": "Supply current, HS+PLL = 64 MHz",
          "symbol": "IDDHSPLL32",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 3.9,
          "max": 5.1,
          "conditions": "3.0V",
          "source_page": 662,
          "source": "datasheet"
        },
        {
          "name": "Power-down current IPD base (VREGPM b'10')",
          "symbol": "IPD",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 0.6,
          "max": 4,
          "conditions": "Max at +85°C column; 3.0V; VREGPM b'10'",
          "source_page": 663,
          "source": "datasheet"
        },
        {
          "name": "Power-down current, Low-Frequency Internal Oscillator/WDT",
          "symbol": "IPD_WDT",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 0.9,
          "max": 5,
          "conditions": "Max at +85°C column; 3.0V; VREGPM b'10'",
          "source_page": 663,
          "source": "datasheet"
        },
        {
          "name": "Power-down current, Low-Power Brown-out Reset (LPBOR)",
          "symbol": "IPD_LPBOR",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 0.9,
          "max": 6,
          "conditions": "Max at +85°C column; 3.0V; VREGPM b'10'",
          "source_page": 663,
          "source": "datasheet"
        },
        {
          "name": "Power-down current, FVR",
          "symbol": "IPD_FVR",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 63,
          "max": 125,
          "conditions": "FVRCON = 0x81 or 0x84; 3.0V; VREGPM b'10'; max at +85°C column",
          "source_page": 663,
          "source": "datasheet"
        },
        {
          "name": "Power-down current, Brown-out Reset (BOR)",
          "symbol": "IPD_BOR",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 30,
          "max": 60,
          "conditions": "Max at +85°C column; 3.0V; VREGPM b'10'",
          "source_page": 663,
          "source": "datasheet"
        },
        {
          "name": "Power-down current, Comparator",
          "symbol": "IPD_CMP",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 48,
          "max": 75,
          "conditions": "Only one comparator active; 3.0V; VREGPM b'10'; max at +85°C column",
          "source_page": 663,
          "source": "datasheet"
        },
        {
          "name": "Input Low Voltage VIL, I/O port with TTL buffer (printed value 0.8 V)",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.8,
          "conditions": "4.5V≤VDD≤5.5V",
          "source_page": 664,
          "source": "datasheet"
        },
        {
          "name": "Input Low Voltage VIL, I/O port (printed 0.15 VDD; value is multiple of VDD)",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "×VDD",
          "min": null,
          "typ": null,
          "max": 0.15,
          "conditions": "1.8V≤VDD≤4.5V",
          "source_page": 664,
          "source": "datasheet"
        },
        {
          "name": "Input Low Voltage VIL, I/O port with Schmitt Trigger buffer (printed 0.2 VDD; value is multiple of VDD)",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "×VDD",
          "min": null,
          "typ": null,
          "max": 0.2,
          "conditions": "2.0V≤VDD≤5.5V",
          "source_page": 664,
          "source": "datasheet"
        },
        {
          "name": "Input Low Voltage VIL, I/O port with I2C levels (printed 0.3 VDD; value is multiple of VDD)",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "×VDD",
          "min": null,
          "typ": null,
          "max": 0.3,
          "conditions": "",
          "source_page": 664,
          "source": "datasheet"
        },
        {
          "name": "Input Low Voltage VIL, I/O port with SMBus levels",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.8,
          "conditions": "2.7V≤VDD≤5.5V",
          "source_page": 664,
          "source": "datasheet"
        },
        {
          "name": "Input Low Voltage VIL, MCLR (printed 0.2 VDD; value is multiple of VDD)",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "×VDD",
          "min": null,
          "typ": null,
          "max": 0.2,
          "conditions": "",
          "source_page": 664,
          "source": "datasheet"
        },
        {
          "name": "Input High Voltage VIH, I/O port with TTL buffer",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "V",
          "min": 2,
          "typ": null,
          "max": null,
          "conditions": "4.5V≤VDD≤5.5V",
          "source_page": 664,
          "source": "datasheet"
        },
        {
          "name": "Input High Voltage VIH, I/O port with Schmitt Trigger buffer (printed 0.8VDD; value is multiple of VDD)",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "×VDD",
          "min": 0.8,
          "typ": null,
          "max": null,
          "conditions": "2.0V≤VDD≤5.5V",
          "source_page": 664,
          "source": "datasheet"
        },
        {
          "name": "Input High Voltage VIH, I/O port with I2C levels (printed 0.7 VDD; value is multiple of VDD)",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "×VDD",
          "min": 0.7,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 664,
          "source": "datasheet"
        },
        {
          "name": "Input High Voltage VIH, I/O port with SMBus levels",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "V",
          "min": 2.1,
          "typ": null,
          "max": null,
          "conditions": "2.7V≤VDD≤5.5V",
          "source_page": 664,
          "source": "datasheet"
        },
        {
          "name": "Input High Voltage VIH, MCLR (printed 0.8 VDD; value is multiple of VDD)",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "×VDD",
          "min": 0.8,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 664,
          "source": "datasheet"
        },
        {
          "name": "Input leakage current, I/O ports (±125 nA printed, 85°C)",
          "symbol": "IIL",
          "kind": "electrical",
          "unit": "nA",
          "min": -125,
          "typ": 5,
          "max": 125,
          "conditions": "VSS≤VPIN≤VDD, pin at high-impedance, 85°C",
          "source_page": 664,
          "source": "datasheet"
        },
        {
          "name": "Input leakage current, MCLR (±200 nA printed, 85°C)",
          "symbol": "IIL",
          "kind": "electrical",
          "unit": "nA",
          "min": -200,
          "typ": 50,
          "max": 200,
          "conditions": "VSS≤VPIN≤VDD, pin at high-impedance, 85°C",
          "source_page": 664,
          "source": "datasheet"
        },
        {
          "name": "Weak pull-up current",
          "symbol": "IPUR",
          "kind": "electrical",
          "unit": "μA",
          "min": 80,
          "typ": 140,
          "max": 200,
          "conditions": "VDD=3.0V, VPIN=VSS",
          "source_page": 664,
          "source": "datasheet"
        },
        {
          "name": "Output low voltage, I/O ports",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.6,
          "conditions": "IOL=10.0 mA, VDD=3.0V",
          "source_page": 664,
          "source": "datasheet"
        },
        {
          "name": "All I/O pins capacitance",
          "symbol": "CIO",
          "kind": "electrical",
          "unit": "pF",
          "min": null,
          "typ": 5,
          "max": 50,
          "conditions": "",
          "source_page": 664,
          "source": "datasheet"
        },
        {
          "name": "BOR Reset voltage, BORV=00",
          "symbol": "VBOR",
          "kind": "electrical",
          "unit": "V",
          "min": 2.7,
          "typ": 2.85,
          "max": 3,
          "conditions": "BORV=00",
          "source_page": 672,
          "source": "datasheet"
        },
        {
          "name": "BOR Reset voltage, BORV=01",
          "symbol": "VBOR",
          "kind": "electrical",
          "unit": "V",
          "min": 2.55,
          "typ": 2.7,
          "max": 2.85,
          "conditions": "BORV=01",
          "source_page": 672,
          "source": "datasheet"
        },
        {
          "name": "BOR Reset voltage, BORV=10",
          "symbol": "VBOR",
          "kind": "electrical",
          "unit": "V",
          "min": 2.3,
          "typ": 2.45,
          "max": 2.6,
          "conditions": "BORV=10",
          "source_page": 672,
          "source": "datasheet"
        },
        {
          "name": "BOR Reset voltage, BORV=11",
          "symbol": "VBOR",
          "kind": "electrical",
          "unit": "V",
          "min": 1.8,
          "typ": 1.9,
          "max": 2.1,
          "conditions": "BORV=11",
          "source_page": 672,
          "source": "datasheet"
        },
        {
          "name": "MCLR pulse width low to ensure Reset",
          "symbol": "TMCLR",
          "kind": "timing",
          "unit": "μs",
          "min": 2,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 672,
          "source": "datasheet"
        },
        {
          "name": "Absolute accuracy, ADC integral error (EIL)",
          "symbol": "EIL",
          "kind": "electrical",
          "unit": "LSb",
          "min": -1,
          "typ": 0.1,
          "max": 1,
          "conditions": "VDD=3.0V, TA=25°C, TAD=1μs; ADCREF+=3.0V, ADCREF-=0V",
          "source_page": 673,
          "source": "datasheet"
        },
        {
          "name": "ADC differential error (EDL)",
          "symbol": "EDL",
          "kind": "electrical",
          "unit": "LSb",
          "min": -1,
          "typ": 0.1,
          "max": 1,
          "conditions": "VDD=3.0V, TA=25°C, TAD=1μs; ADCREF+=3.0V, ADCREF-=0V",
          "source_page": 673,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance junction to ambient, 28-pin SSOP package",
          "symbol": "θJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 90,
          "max": null,
          "conditions": "28-pin SSOP package",
          "source_page": 666,
          "source": "datasheet"
        },
        {
          "name": "Maximum junction temperature",
          "symbol": "TJMAX",
          "kind": "thermal",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 666,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "pic18f24q10-i"
  ],
  "discovery_pitch": "PIC18F24Q10-I (Microchip Tech) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pic18f24q10-i.kicad_sym",
    "pic18f24q10-i.kicad_mod",
    "pic18f24q10-i.glb",
    "pic18f24q10-i.step",
    "pic18f24q10-i.lbr",
    "docs/hero.png",
    "docs/pic18f24q10-i-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pic18f24q10-i-hero.glb",
    "pic18f24q10-i-hero.overlay.json",
    "pic18f24q10-i-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}