Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18F24K22-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC18F24K22-E from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/VPP/MCLR | input | Input-only pin that is a digital input when MCLR is disabled, otherwise the active-low Master Clear (device Reset) input, and the programming voltage input VPP during programming. |
| 2 | RA0/C12IN0-/AN0 | bidirectional | Digital I/O with TTL input, also comparator C1 and C2 inverting input and analog input AN0. |
| 3 | RA1/C12IN1-/AN1 | bidirectional | Digital I/O with TTL input, also comparator C1 and C2 inverting input and analog input AN1. |
| 4 | RA2/C2IN+/AN2/DACOUT/VREF- | bidirectional | Digital I/O, also comparator C2 noninverting input, analog input AN2, DAC reference output DACOUT and A/D reference voltage (low) input VREF-. |
| 5 | RA3/C1IN+/AN3/VREF+ | bidirectional | Digital I/O, also comparator C1 noninverting input, analog input AN3 and A/D reference voltage (high) input VREF+. |
| 6 | RA4/CCP5/C1OUT/SRQ/T0CKI | bidirectional | Digital I/O with Schmitt Trigger input, also Timer0 external clock input T0CKI, comparator C1 output, SR latch Q output and CCP5 function. |
| 7 | RA5/C2OUT/SRNQ/SS1/HLVDIN/AN4 | bidirectional | Digital I/O with TTL input, also comparator C2 output, SR latch Q output, MSSP1 SPI client select SS1, high/low-voltage detect input HLVDIN and analog input AN4. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | RA7/CLKI/OSC1 | bidirectional | Digital I/O (disabled in external oscillator modes), also external clock source input CLKI and oscillator crystal input OSC1. |
| 10 | RA6/CLKO/OSC2 | bidirectional | Digital I/O enabled in INTOSC modes when CLKO is not enabled, also CLKO output at 1/4 OSC1 frequency in RC mode and oscillator crystal output OSC2. |
| 11 | RC0/P2B/T3CKI/T3G/T1CKI/SOSCO | bidirectional | Digital I/O with Schmitt Trigger input, also Enhanced CCP2 PWM output P2B, Timer3 clock input T3CKI, Timer3 gate T3G, Timer1 clock input T1CKI and secondary oscillator output SOSCO. |
| 12 | RC1/P2A/CCP2/SOSCI | bidirectional | Digital I/O with Schmitt Trigger input, also Enhanced CCP2 PWM output P2A, CCP2 capture/compare/PWM and secondary oscillator input SOSCI. |
| 13 | RC2/CTPLS/P1A/CCP1/T5CKI/AN14 | bidirectional | Digital I/O with Schmitt Trigger input, also CTMU pulse generator output CTPLS, Enhanced CCP1 PWM output P1A, CCP1 capture/compare/PWM, Timer5 clock input T5CKI and analog input AN14. |
| 14 | RC3/SCK1/SCL1/AN15 | bidirectional | Digital I/O with Schmitt Trigger input, also MSSP1 SPI clock SCK1, I2C clock SCL1 and analog input AN15. |
| 15 | RC4/SDI1/SDA1/AN16 | bidirectional | Digital I/O with Schmitt Trigger input, also MSSP1 SPI data input SDI1, I2C data SDA1 and analog input AN16. |
| 16 | RC5/SDO1/AN17 | bidirectional | Digital I/O with Schmitt Trigger input, also MSSP1 SPI data output SDO1 and analog input AN17. |
| 17 | RC6/P3A/CCP3/TX1/CK1/AN18 | bidirectional | Digital I/O with Schmitt Trigger input, also Enhanced CCP3 PWM output P3A, CCP3 capture/compare/PWM, EUSART asynchronous transmit TX1, synchronous clock CK1 and analog input AN18. |
| 18 | RC7/P3B/RX1/DT1/AN19 | bidirectional | Digital I/O with Schmitt Trigger input, also Enhanced CCP3 PWM output P3B, EUSART asynchronous receive RX1, synchronous data DT1 and analog input AN19. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins, 2.3V to 5.5V for PIC18FXXK22 devices and 1.8V to 3.6V for PIC18LFXXK22 devices. |
| 21 | RB0/INT0/CCP4/FLT0/SRI/SS2/AN12 | bidirectional | Digital I/O with TTL input, also external interrupt INT0, CCP4 capture/compare/PWM, PWM Fault input FLT0 for ECCP Auto-Shutdown, SR latch input SRI, MSSP2 SPI client select SS2 and analog input AN12. |
| 22 | RB1/INT1/P1C/SCK2/SCL2/C12IN3-/AN10 | bidirectional | Digital I/O with TTL input, also external interrupt INT1, Enhanced CCP1 PWM output P1C, MSSP2 clock SCK2/SCL2, comparator inverting input C12IN3- and analog input AN10. |
| 23 | RB2/INT2/CTED1/P1B/SDI2/SDA2/AN8 | bidirectional | Digital I/O with TTL input, also external interrupt INT2, CTMU Edge 1 input CTED1, Enhanced CCP1 PWM output P1B, MSSP2 data SDI2/SDA2 and analog input AN8. |
| 24 | RB3/CTED2/P2A/CCP2/SDO2/C12IN2-/AN9 | bidirectional | Digital I/O with TTL input, also CTMU Edge 2 input CTED2, Enhanced CCP2 PWM output P2A, CCP2 capture/compare/PWM, MSSP2 SPI data output SDO2, comparator inverting input C12IN2- and analog input AN9. |
| 25 | RB4/IOC0/P1D/T5G/AN11 | bidirectional | Digital I/O with TTL input, also interrupt-on-change pin IOC0, Enhanced CCP1 PWM output P1D, Timer5 external clock gate input T5G and analog input AN11. |
| 26 | RB5/IOC1/P2B/P3A/CCP3/T3CKI/T1G/AN13 | bidirectional | Digital I/O with TTL input, also interrupt-on-change pin IOC1, Enhanced CCP2 PWM output P2B, Enhanced CCP3 PWM output P3A, CCP3 capture/compare/PWM, Timer3 clock input T3CKI, Timer1 gate input T1G and analog input AN13. |
| 27 | RB6/IOC2/TX2/CK2/PGC | bidirectional | Digital I/O with TTL input, also interrupt-on-change pin IOC2, EUSART asynchronous transmit TX2, synchronous clock CK2 and In-Circuit Debugger and ICSP programming clock PGC. |
| 28 | RB7/IOC3/RX2/DT2/PGD | bidirectional | Digital I/O with TTL input, also interrupt-on-change pin IOC3, EUSART asynchronous receive RX2, synchronous data DT2 and In-Circuit Debugger and ICSP programming data PGD. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2.3 | 5.5 | V | PIC18F2X/4XK22, standard operating conditions, -40°C to +125°C | 417 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | 417 | |||
| VDD Start Voltage to ensure internal Power-on Reset signal | VPOR | 0.7 | V | See section on Power-on Reset for details | 417 | ||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 417 | ||
| Brown-out Reset Voltage BORV<1:0>=11 | VBOR | 1.75 | 1.9 | 2.05 | V | BORV<1:0> = 11 | 417 |
| Brown-out Reset Voltage BORV<1:0>=10 | VBOR | 2.05 | 2.2 | 2.35 | V | BORV<1:0> = 10 | 417 |
| Brown-out Reset Voltage BORV<1:0>=01 | VBOR | 2.35 | 2.5 | 2.65 | V | BORV<1:0> = 01 | 417 |
| Brown-out Reset Voltage BORV<1:0>=00 | VBOR | 2.65 | 2.85 | 3.05 | V | BORV<1:0> = 00 | 417 |
| Operating temperature | TA | -40 | 125 | °C | Standard Operating Conditions | 417 | |
| Power-down Base Current, Sleep mode, 2.3V, Max +85°C | IPD | 25 | µA | Sleep mode, WDT, BOR, FVR and SOSC disabled, all peripherals inactive; VDD 2.3V | 418 | ||
| Power-down Base Current, Sleep mode, 3.0V, Max +85°C | IPD | 30 | µA | Sleep mode, WDT, BOR, FVR and SOSC disabled, all peripherals inactive; VDD 3.0V | 418 | ||
| Power-down Base Current, Sleep mode, 5.0V, Max +85°C | IPD | 35 | µA | Sleep mode, WDT, BOR, FVR and SOSC disabled, all peripherals inactive; VDD 5.0V | 418 | ||
| Power-down Base Current, Sleep mode, 2.3V, Max +125°C | IPD | 35 | µA | Sleep mode, WDT, BOR, FVR and SOSC disabled, all peripherals inactive; VDD 2.3V | 418 | ||
| Power-down Base Current, Sleep mode, 3.0V, Max +125°C | IPD | 40 | µA | Sleep mode, WDT, BOR, FVR and SOSC disabled, all peripherals inactive; VDD 3.0V | 418 | ||
| Power-down Base Current, Sleep mode, 5.0V, Max +125°C | IPD | 50 | µA | Sleep mode, WDT, BOR, FVR and SOSC disabled, all peripherals inactive; VDD 5.0V | 418 | ||
| Supply Current RC_RUN, MFINTOSC 500 kHz, VDD 3.0V | IDD | 0.17 | 0.3 | mA | -40°C to +125°C, VDD = 3.0V, FOSC = 500 kHz (RC_RUN mode, MFINTOSC source) | 420 | |
| Supply Current RC_RUN, MFINTOSC 500 kHz, VDD 2.3V | IDD | 0.18 | 0.25 | mA | -40°C to +125°C, VDD = 2.3V, FOSC = 500 kHz (RC_RUN mode, MFINTOSC source) | 420 | |
| Supply Current RC_RUN, MFINTOSC 500 kHz, VDD 3.0V (D028) | IDD | 0.2 | 0.3 | mA | -40°C to +125°C, VDD = 3.0V (RC_RUN mode, MFINTOSC source) | 420 | |
| Supply Current RC_RUN, MFINTOSC 500 kHz, VDD 5.0V | IDD | 0.25 | 0.35 | mA | -40°C to +125°C, VDD = 5.0V (RC_RUN mode, MFINTOSC source) | 420 | |
| Supply Current RC_RUN, HFINTOSC 1 MHz, VDD 3.0V | IDD | 0.45 | 0.65 | mA | -40°C to +125°C, VDD = 3.0V, FOSC = 1 MHz (RC_RUN mode, HFINTOSC source) | 421 | |
| Supply Current RC_RUN, HFINTOSC 1 MHz, VDD 2.3V | IDD | 0.4 | 0.6 | mA | -40°C to +125°C, VDD = 2.3V, FOSC = 1 MHz (RC_RUN mode, HFINTOSC source) | 421 | |
| Supply Current RC_RUN, HFINTOSC 1 MHz, VDD 3.0V (D033) | IDD | 0.5 | 0.65 | mA | -40°C to +125°C, VDD = 3.0V (RC_RUN mode, HFINTOSC source) | 421 | |
| Supply Current RC_RUN, HFINTOSC 1 MHz, VDD 5.0V | IDD | 0.55 | 0.75 | mA | -40°C to +125°C, VDD = 5.0V (RC_RUN mode, HFINTOSC source) | 421 | |
| Supply Current RC_RUN, HFINTOSC 16 MHz, VDD 3.0V | IDD | 2.2 | 3 | mA | -40°C to +125°C, VDD = 3.0V, FOSC = 16 MHz (RC_RUN mode, HFINTOSC source) | 421 | |
| Supply Current RC_RUN, HFINTOSC 16 MHz, VDD 2.3V | IDD | 1.7 | 2 | mA | -40°C to +125°C, VDD = 2.3V, FOSC = 16 MHz (RC_RUN mode, HFINTOSC source) | 421 | |
| Supply Current RC_RUN, HFINTOSC 16 MHz, VDD 3.0V (D038) | IDD | 2.2 | 3 | mA | -40°C to +125°C, VDD = 3.0V (RC_RUN mode, HFINTOSC source) | 421 | |
| Supply Current RC_RUN, HFINTOSC 16 MHz, VDD 5.0V | IDD | 2.5 | 3.5 | mA | -40°C to +125°C, VDD = 5.0V, FOSC = 16 MHz (RC_RUN mode, HFINTOSC source) | 421 | |
| Supply Current RC_RUN, HFINTOSC+PLL 64 MHz, VDD 3.0V | IDD | 6.2 | 8.5 | mA | -40°C to +125°C, VDD = 3.0V, FOSC = 64 MHz (RC_RUN mode, HFINTOSC + PLL source) | 421 | |
| Supply Current RC_RUN, HFINTOSC+PLL 64 MHz, VDD 5.0V | IDD | 6.8 | 9.5 | mA | -40°C to +125°C, VDD = 5.0V (RC_RUN mode, HFINTOSC + PLL source) | 421 | |
| Ambient temperature under bias | -40 | 125 | °C | 414 | |||
| Storage temperature | -65 | 150 | °C | 414 | |||
| Voltage on any pin with respect to VSS (except VDD and MCLR) | -0.3 | V | Max printed as (VDD + 0.3V) | 414 | |||
| Voltage on MCLR with respect to VSS | 0 | 11 | V | Note 2 | 414 | ||
| Total power dissipation | 1 | W | Note 1 | 414 | |||
| Maximum current out of VSS pin | 300 | mA | -40°C to +85°C | 414 | |||
| Maximum current out of VSS pin | 125 | mA | +85°C to +125°C | 414 | |||
| Maximum current into VDD pin | 200 | mA | -40°C to +85°C | 414 | |||
| Maximum current into VDD pin | 85 | mA | +85°C to +125°C | 414 | |||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 414 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 414 | ||
| Maximum current sunk by all ports | 200 | mA | -40°C to +85°C | 414 |
CAD (KiCad official)
- Symbol:
PIC18F24K22-E - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic18f24k22-e-etched.step/pic18f24k22-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f24k22-e.step/pic18f24k22-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (539 pp, sha256
d0ba745eb6a13bdb, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).