3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18F2450-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC18F2450-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input, programming voltage input (VPP), or digital input RE3 when MCLR is disabled (Schmitt Trigger). |
| 2 | RA0/AN0 | bidirectional | PORTA digital I/O (TTL) or analog input 0. |
| 3 | RA1/AN1 | bidirectional | PORTA digital I/O (TTL) or analog input 1. |
| 4 | RA2/AN2/VREF- | bidirectional | PORTA digital I/O (TTL), analog input 2 or A/D reference voltage (low) input. |
| 5 | RA3/AN3/VREF+ | bidirectional | PORTA digital I/O (TTL), analog input 3 or A/D reference voltage (high) input. |
| 6 | RA4/T0CKI/RCV | bidirectional | PORTA digital I/O (Schmitt Trigger), Timer0 external clock input or external USB transceiver RCV input (TTL). |
| 7 | RA5/AN4/HLVDIN | bidirectional | PORTA digital I/O (TTL), analog input 4 or High/Low-Voltage Detect input. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI | input | Oscillator crystal input or external clock source input (analog). |
| 10 | OSC2/CLKO/RA6 | output | Oscillator crystal output, CLKO (1/4 the OSC1 frequency, instruction cycle rate) in select modes, or general purpose I/O RA6. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC digital I/O, Timer1 oscillator output or Timer1 external clock input (Schmitt Trigger). |
| 12 | RC1/T1OSI/UOE | bidirectional | PORTC digital I/O, Timer1 oscillator input or external USB transceiver OE output. |
| 13 | RC2/CCP1 | bidirectional | PORTC digital I/O or Capture 1 input/Compare 1 output/PWM1 output. |
| 14 | VUSB | power_out | Internal USB 3.3V voltage regulator output, positive supply for the internal USB transceiver. |
| 15 | RC4/D-/VM | bidirectional | Digital input (TTL), USB differential minus line (input/output) or external USB transceiver VM input. |
| 16 | RC5/D+/VP | bidirectional | Digital input (TTL), USB differential plus line (input/output) or external USB transceiver VP input. |
| 17 | RC6/TX/CK | bidirectional | PORTC digital I/O, EUSART asynchronous transmit or EUSART synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | PORTC digital I/O, EUSART asynchronous receive or EUSART synchronous data. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/AN12/INT0 | bidirectional | PORTB digital I/O (TTL, software-programmable weak pull-up), analog input 12 or external interrupt 0. |
| 22 | RB1/AN10/INT1 | bidirectional | PORTB digital I/O (TTL, software-programmable weak pull-up), analog input 10 or external interrupt 1. |
| 23 | RB2/AN8/INT2/VMO | bidirectional | PORTB digital I/O (TTL, weak pull-up), analog input 8, external interrupt 2 or external USB transceiver VMO output. |
| 24 | RB3/AN9/VPO | bidirectional | PORTB digital I/O (TTL, weak pull-up), analog input 9 or external USB transceiver VPO output. |
| 25 | RB4/AN11/KBI0 | bidirectional | PORTB digital I/O (TTL, weak pull-up), analog input 11 or interrupt-on-change pin. |
| 26 | RB5/KBI1/PGM | bidirectional | PORTB digital I/O (TTL, weak pull-up), interrupt-on-change pin or Low-Voltage ICSP programming enable pin. |
| 27 | RB6/KBI2/PGC | bidirectional | PORTB digital I/O (TTL, weak pull-up), interrupt-on-change pin or In-Circuit Debugger and ICSP programming clock pin. |
| 28 | RB7/KBI3/PGD | bidirectional | PORTB digital I/O (TTL, weak pull-up), interrupt-on-change pin or In-Circuit Debugger and ICSP programming data pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VDD with respect to VSS | VDD | -0.3 | 7.5 | V | 269 | ||
| Voltage on any pin with respect to VSS (except VDD and MCLR) | -0.3 | V | upper limit is VDD + 0.3V | 269 | |||
| Voltage on MCLR with respect to VSS | 0 | 13.25 | V | Note 2 | 269 | ||
| Ambient temperature under bias | -40 | 85 | °C | 269 | |||
| Storage temperature | -65 | 150 | °C | 269 | |||
| Total power dissipation | 1 | W | Note 1 | 269 | |||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VDD | 269 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 269 | |
| Supply Voltage | VDD | 2 | 5.5 | V | EC, HS, XT and Internal Oscillator modes | 271 | |
| Supply Voltage (PLL modes) | VDD | 3 | 5.5 | V | HSPLL, XTPLL, ECPIO and ECPLL Oscillator modes | 271 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | 271 | |||
| VDD Start Voltage to ensure internal Power-on Reset signal | VPOR | 0.7 | V | See Section 4.3 | 271 | ||
| VDD Rise Rate to Ensure Internal Power-on Reset Signal | SVDD | 0.05 | V/ms | See Section 4.3 | 271 | ||
| Brown-out Reset Voltage | VBOR | 2 | 2.11 | 2.22 | V | BORV1:BORV0 = 11 | 271 |
| Brown-out Reset Voltage | VBOR | 2.65 | 2.79 | 2.93 | V | BORV1:BORV0 = 10 | 271 |
| Brown-out Reset Voltage | VBOR | 4.11 | 4.33 | 4.55 | V | BORV1:BORV0 = 01 | 271 |
| Brown-out Reset Voltage | VBOR | 4.36 | 4.59 | 4.82 | V | BORV1:BORV0 = 00 | 271 |
| Power-Down Current (Sleep), all devices | IPD | 0.1 | 19 | μA | -40°C, VDD = 5.0V, Sleep mode | 272 | |
| Power-Down Current (Sleep), all devices | IPD | 0.1 | 2 | μA | +25°C, VDD = 5.0V, Sleep mode | 272 | |
| Power-Down Current (Sleep), all devices | IPD | 2.5 | 15 | μA | +85°C, VDD = 5.0V, Sleep mode | 272 | |
| Supply Current RC_RUN, all devices | IDD | 95 | 168 | μA | -40°C, VDD = 5.0V, FOSC = 31 kHz (RC_RUN mode, INTRC source) | 273 | |
| Supply Current RC_RUN, all devices | IDD | 75 | 160 | μA | +25°C, VDD = 5.0V, FOSC = 31 kHz (RC_RUN mode, INTRC source) | 273 | |
| Supply Current RC_RUN, all devices | IDD | 65 | 152 | μA | +85°C, VDD = 5.0V, FOSC = 31 kHz (RC_RUN mode, INTRC source) | 273 | |
| Supply Current RC_IDLE, all devices | IDD | 6.5 | 16 | μA | -40°C, VDD = 5.0V, FOSC = 31 kHz (RC_IDLE mode, INTRC source) | 273 | |
| Supply Current RC_IDLE, all devices | IDD | 7 | 16 | μA | +25°C, VDD = 5.0V, FOSC = 31 kHz (RC_IDLE mode, INTRC source) | 273 | |
| Supply Current RC_IDLE, all devices | IDD | 9 | 36 | μA | +85°C, VDD = 5.0V, FOSC = 31 kHz (RC_IDLE mode, INTRC source) | 273 | |
| Input Low Voltage, I/O ports with TTL buffer | VIL | 0 | 0.15 | V | VDD < 4.5V; max is 0.15 VDD, min is VSS | 280 | |
| Input Low Voltage, I/O ports with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 280 | ||
| Input Low Voltage, MCLR | VIL | 0 | 0.2 | V | min VSS, max 0.2 VDD | 280 | |
| Input Low Voltage, OSC1 and T1OSI | VIL | 0 | 0.3 | V | XT, HS, HSPLL modes; min VSS, max 0.3 VDD | 280 | |
| Input Low Voltage, OSC1 | VIL | 0 | 0.2 | V | EC mode; min VSS, max 0.2 VDD | 280 | |
| Input High Voltage, I/O ports with TTL buffer | VIH | 0.25 | V | VDD < 4.5V; min 0.25 VDD + 0.8V, max VDD | 280 | ||
| Input High Voltage, I/O ports with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V; max VDD | 280 | ||
| Input High Voltage, MCLR | VIH | 0.8 | V | min 0.8 VDD, max VDD | 280 | ||
| Input High Voltage, OSC1 and T1OSI | VIH | 0.7 | V | XT, HS, HSPLL modes; min 0.7 VDD, max VDD | 280 | ||
| Input High Voltage, OSC1 | VIH | 0.8 | V | EC mode; min 0.8 VDD, max VDD | 280 | ||
| Input Leakage Current, I/O Ports (except D+ and D-) | IIL | -200 | 200 | nA | VDD = 5V | 280 | |
| Input Leakage Current, I/O Ports (except D+ and D-) | IIL | -50 | 50 | nA | VDD = 3V | 280 | |
| Input Leakage Current, MCLR | IIL | -1 | 1 | μA | Vss ≤ VPIN ≤ VDD | 280 | |
| Input Leakage Current, OSC1 | IIL | -1 | 1 | μA | Vss ≤ VPIN ≤ VDD | 280 | |
| PORTB Weak Pull-up Current | IPURB | 50 | 400 | μA | VDD = 5V, VPIN = VSS | 280 | |
| Operating temperature (industrial) | TA | -40 | 85 | °C | industrial | 271 |
CAD (KiCad official)
- Symbol:
PIC18F2450-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic18f2450-i-etched.step/pic18f2450-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f2450-i.step/pic18f2450-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (324 pp, sha256
9b1d5136ad16e99a, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).