3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18F2420-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC18F2420-E from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP/RE3 | input | Active-low Master Clear (Reset) input, programming voltage (VPP) input, or digital input RE3 when MCLR is disabled via the MCLRE bit. |
| 2 | RA0/AN0 | bidirectional | PORTA digital I/O with TTL input, or analog input 0. |
| 3 | RA1/AN1 | bidirectional | PORTA digital I/O with TTL input, or analog input 1. |
| 4 | RA2/AN2/VREF-/CVREF | bidirectional | PORTA digital I/O, analog input 2, A/D reference voltage (low) input, or comparator reference voltage output. |
| 5 | RA3/AN3/VREF+ | bidirectional | PORTA digital I/O, analog input 3, or A/D reference voltage (high) input. |
| 6 | RA4/T0CKI/C1OUT | bidirectional | PORTA digital I/O with Schmitt Trigger input, Timer0 external clock input, or Comparator 1 output. |
| 7 | RA5/AN4/SS/HLVDIN/C2OUT | bidirectional | PORTA digital I/O, analog input 4, SPI client select input, High/Low-Voltage Detect input, or Comparator 2 output. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | bidirectional | Oscillator crystal or external clock source input (ST buffer in RC mode, CMOS otherwise), or general purpose I/O RA7. |
| 10 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output, or in RC mode CLKO at 1/4 the OSC1 frequency denoting the instruction cycle rate, or general purpose I/O RA6. |
| 11 | RC0/T1OSO/T13CKI | bidirectional | PORTC digital I/O, Timer1 oscillator output, or Timer1/Timer3 external clock input. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | PORTC digital I/O, Timer1 oscillator input, or Capture 2 input/Compare 2 output/PWM2 output when CCP2MX is cleared. |
| 13 | RC2/CCP1 | bidirectional | PORTC digital I/O, or Capture 1 input/Compare 1 output/PWM1 output. |
| 14 | RC3/SCK/SCL | bidirectional | PORTC digital I/O, or synchronous serial clock input/output for SPI mode (SCK) and I2C mode (SCL). |
| 15 | RC4/SDI/SDA | bidirectional | PORTC digital I/O, SPI data in, or I2C data I/O. |
| 16 | RC5/SDO | bidirectional | PORTC digital I/O, or SPI data out. |
| 17 | RC6/TX/CK | bidirectional | PORTC digital I/O, EUSART asynchronous transmit, or EUSART synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | PORTC digital I/O, EUSART asynchronous receive, or EUSART synchronous data. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT0/FLT0/AN12 | bidirectional | PORTB digital I/O with software-programmable weak pull-up, external interrupt 0, PWM Fault input for CCP1, or analog input 12. |
| 22 | RB1/INT1/AN10 | bidirectional | PORTB digital I/O with software-programmable weak pull-up, external interrupt 1, or analog input 10. |
| 23 | RB2/INT2/AN8 | bidirectional | PORTB digital I/O with software-programmable weak pull-up, external interrupt 2, or analog input 8. |
| 24 | RB3/AN9/CCP2 | bidirectional | PORTB digital I/O with software-programmable weak pull-up, analog input 9, or Capture 2 input/Compare 2 output/PWM2 output (default assignment when CCP2MX is set per the table note). |
| 25 | RB4/KBI0/AN11 | bidirectional | PORTB digital I/O with software-programmable weak pull-up, interrupt-on-change pin, or analog input 11. |
| 26 | RB5/KBI1/PGM | bidirectional | PORTB digital I/O with software-programmable weak pull-up, interrupt-on-change pin, or Low-Voltage ICSP programming enable pin. |
| 27 | RB6/KBI2/PGC | bidirectional | PORTB digital I/O with software-programmable weak pull-up, interrupt-on-change pin, or In-Circuit Debugger and ICSP programming clock pin. |
| 28 | RB7/KBI3/PGD | bidirectional | PORTB digital I/O with software-programmable weak pull-up, interrupt-on-change pin, or In-Circuit Debugger and ICSP programming data pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating supply voltage (standard F device) | VDD | 4.2 | 5.5 | V | Standard 'F' devices such as PIC18F2420 | 6 | |
| Operating frequency | 0 | 40 | MHz | DC - 40 MHz | 7 | ||
| Maximum recommended analog source impedance (A/D) | RS | 2.5 | kΩ | A/D analog sources | 219 | ||
| Maximum recommended analog source impedance (comparator) | RS | 10 | kΩ | Comparator analog sources | 228 | ||
| External RC oscillator resistor | REXT | 3 | 100 | kΩ | RC / RCIO oscillator modes | 22 | |
| External RC oscillator capacitor | CEXT | 20 | pF | CEXT > 20 pF, RC / RCIO oscillator modes | 22 | ||
| A/D sample/hold capacitor | CHOLD | 25 | pF | 218 | |||
| Analog input pin capacitance | CPIN | 5 | pF | 218 | |||
| Analog input pin leakage current | ILEAKAGE | -100 | 100 | nA | Analog input model, leakage at the pin due to various junctions | 218 |
CAD (KiCad official)
- Symbol:
PIC18F2420-E - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic18f2420-e-etched.step/pic18f2420-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f2420-e.step/pic18f2420-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (383 pp, sha256
7a3ba485a1cab451, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).