main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pic18f23k22-i: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
pic18f23k22-i-etched.glb Publish 0.1.0 · Ray
pic18f23k22-i-etched.step pic18f23k22-i: factory component page (tier=mfr) · Ray
pic18f23k22-i-hero.glb pic18f23k22-i: hero GLB from the etched model (keeps the MPN mark) · Ray
pic18f23k22-i-hero.overlay.json Publish 0.1.0 · Ray
pic18f23k22-i.glb Publish 0.1.0 · Ray
pic18f23k22-i.kicad_mod Publish 0.1.0 · Ray
pic18f23k22-i.kicad_sym Publish 0.1.0 · Ray
pic18f23k22-i.lbr Publish 0.1.0 · Ray
pic18f23k22-i.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray

PIC18F23K22-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)

PIC18F23K22-I from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA2/C2IN+/AN2/DACOUT/VREF- bidirectional Digital I/O with TTL input; also comparator C2 noninverting input, analog input AN2, DAC reference output DACOUT, and A/D reference voltage (low) input VREF-.
2 RA3/C1IN+/AN3/VREF+ bidirectional Digital I/O with TTL input; also comparator C1 noninverting input, analog input AN3, and A/D reference voltage (high) input VREF+.
3 RA4/CCP5/C1OUT/SRQ/T0CKI bidirectional Digital I/O with Schmitt Trigger input; also CCP5 capture/compare/PWM, comparator C1 output, SR latch Q output, and Timer0 external clock input T0CKI.
4 RA5/C2OUT/SRNQ/SS1/HLVDIN/AN4 bidirectional Digital I/O with TTL input; also comparator C2 output, SR latch complementary output SRNQ, MSSP1 SPI client select SS1, high/low-voltage detect input HLVDIN, and analog input AN4.
5 VSS power_in Ground reference for logic and I/O pins.
6 RA7/CLKI/OSC1 bidirectional Digital I/O with TTL input (disabled in external oscillator modes); also external clock source input CLKI and oscillator input OSC1 (ST buffer in RC mode, CMOS otherwise).
7 RA6/CLKO/OSC2 bidirectional Digital I/O with TTL input (enabled in INTOSC modes when CLKO is not enabled); in RC mode outputs CLKOUT at 1/4 the OSC1 frequency, and in crystal oscillator mode serves as the OSC2 crystal output.
8 RC0/P2B/T3CKI/T3G/T1CKI/SOSCO bidirectional Digital I/O with Schmitt Trigger input; also Enhanced CCP2 PWM output P2B, Timer3 clock input T3CKI, Timer3 gate input T3G, Timer1 clock input T1CKI, and secondary oscillator output SOSCO.
9 RC1/P2A/CCP2/SOSCI bidirectional Digital I/O with Schmitt Trigger input; also Enhanced CCP2 PWM output P2A, CCP2 capture/compare/PWM, and secondary oscillator input SOSCI.
10 RC2/CTPLS/P1A/CCP1/T5CKI/AN14 bidirectional Digital I/O with Schmitt Trigger input; also CTMU pulse generator output CTPLS, Enhanced CCP1 PWM output P1A, CCP1 capture/compare/PWM, Timer5 clock input T5CKI, and analog input AN14.
11 RC3/SCK1/SCL1/AN15 bidirectional Digital I/O with Schmitt Trigger input; also MSSP1 SPI clock SCK1, MSSP1 I2C clock SCL1, and analog input AN15.
12 RC4/SDI1/SDA1/AN16 bidirectional Digital I/O with Schmitt Trigger input; also MSSP1 SPI data input SDI1, MSSP1 I2C data SDA1, and analog input AN16.
13 RC5/SDO1/AN17 bidirectional Digital I/O with Schmitt Trigger input; also MSSP1 SPI data output SDO1 and analog input AN17.
14 RC6/P3A/CCP3/TX1/CK1/AN18 bidirectional Digital I/O with Schmitt Trigger input; also Enhanced CCP3 PWM output P3A, CCP3 capture/compare/PWM, EUSART asynchronous transmit TX1, EUSART synchronous clock CK1, and analog input AN18.
15 RC7/P3B/RX1/DT1/AN19 bidirectional Digital I/O with Schmitt Trigger input; also Enhanced CCP3 PWM output P3B, EUSART asynchronous receive RX1, EUSART synchronous data DT1, and analog input AN19.
16 VSS power_in Ground reference for logic and I/O pins.
17 VDD power_in Positive supply for logic and I/O pins.
18 RB0/INT0/CCP4/FLT0/SRI/SS2/AN12 bidirectional Digital I/O with TTL input; also external interrupt INT0 (Schmitt Trigger), CCP4 capture/compare/PWM, ECCP auto-shutdown fault input FLT0, SR latch input SRI, MSSP2 SPI client select SS2, and analog input AN12.
19 RB1/INT1/P1C/SCK2/SCL2/C12IN3-/AN10 bidirectional Digital I/O with TTL input; also external interrupt INT1, Enhanced CCP1 PWM output P1C, MSSP2 SPI clock SCK2 or I2C clock SCL2, comparator C1/C2 inverting input C12IN3-, and analog input AN10.
20 RB2/INT2/CTED1/P1B/SDI2/SDA2/AN8 bidirectional Digital I/O with TTL input; also external interrupt INT2, CTMU Edge 1 input CTED1, Enhanced CCP1 PWM output P1B, MSSP2 SPI data input SDI2 or I2C data SDA2, and analog input AN8.
21 RB3/CTED2/P2A/CCP2/SDO2/C12IN2-/AN9 bidirectional Digital I/O with TTL input; also CTMU Edge 2 input CTED2, Enhanced CCP2 PWM output P2A, CCP2 capture/compare/PWM, MSSP2 SPI data output SDO2, comparator C1/C2 inverting input C12IN2-, and analog input AN9.
22 RB4/IOC0/P1D/T5G/AN11 bidirectional Digital I/O with TTL input; also interrupt-on-change pin IOC0, Enhanced CCP1 PWM output P1D, Timer5 external clock gate input T5G, and analog input AN11.
23 RB5/IOC1/P2B/P3A/CCP3/T3CKI/T1G/AN13 bidirectional Digital I/O with TTL input; also interrupt-on-change pin IOC1, Enhanced CCP2 PWM output P2B, Enhanced CCP3 PWM output P3A, CCP3 capture/compare/PWM, Timer3 clock input T3CKI, Timer1 external clock gate input T1G, and analog input AN13.
24 RB6/IOC2/TX2/CK2/PGC bidirectional Digital I/O with TTL input; also interrupt-on-change pin IOC2, EUSART asynchronous transmit TX2, EUSART synchronous clock CK2, and In-Circuit Debugger/ICSP programming clock PGC.
25 RB7/IOC3/RX2/DT2/PGD bidirectional Digital I/O with TTL input; also interrupt-on-change pin IOC3, EUSART asynchronous receive RX2, EUSART synchronous data DT2, and In-Circuit Debugger/ICSP programming data PGD.
26 RE3/VPP/MCLR input Digital input only (Schmitt Trigger) when MCLRE is clear, otherwise active-low Master Clear (device Reset) input MCLR; it is also the programming voltage input VPP.
27 RA0/C12IN0-/AN0 bidirectional Digital I/O with TTL input; also comparator C1/C2 inverting input C12IN0- and analog input AN0.
28 RA1/C12IN1-/AN1 bidirectional Digital I/O with TTL input; also comparator C1/C2 inverting input C12IN1- and analog input AN1.
29 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-28-EP(6x6)
Category Single Chip Microcomputer/Microcontroller
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C under bias 414
Storage temperature -65 150 °C 414
Voltage on any pin with respect to VSS (except VDD and MCLR) -0.3 V upper limit printed as (VDD + 0.3V) 414
Voltage on MCLR with respect to VSS 0 11 V Note 2 applies 414
Total power dissipation 1 W Note 1 (Pdis formula as printed) 414
Maximum current out of VSS pin 300 mA -40°C to +85°C 414
Maximum current out of VSS pin 125 mA +85°C to +125°C 414
Maximum current into VDD pin 200 mA -40°C to +85°C 414
Maximum current into VDD pin 85 mA +85°C to +125°C 414
Input clamp current IIK 20 mA VI < 0 or VI > VDD 414
Output clamp current IOK 20 mA VO < 0 or VO > VDD 414
Maximum current sunk by all ports 200 mA -40°C to +85°C 414
Operating temperature TA -40 125 °C Standard Operating Conditions (unless otherwise stated) 417
Supply Voltage PIC18F2X/4XK22 (D001) VDD 2.3 5.5 V PIC18F2X/4XK22; -40°C ≤ TA ≤ +125°C 417
RAM Data Retention Voltage (D002) VDR 1.5 V Note 1: limit to which VDD can be lowered in Sleep or during Reset without losing RAM data 417
VDD Start Voltage to ensure internal Power-on Reset signal (D003) VPOR 0.7 V See section on Power-on Reset for details 417
VDD Rise Rate to ensure internal Power-on Reset signal (D004) SVDD 0.05 V/ms See section on Power-on Reset for details 417
Brown-out Reset Voltage (D005) VBOR 1.75 1.9 2.05 V BORV<1:0> = 11 417
Brown-out Reset Voltage (D005) VBOR 2.05 2.2 2.35 V BORV<1:0> = 10 417
Brown-out Reset Voltage (D005) VBOR 2.35 2.5 2.65 V BORV<1:0> = 01 417
Brown-out Reset Voltage (D005) VBOR 2.65 2.85 3.05 V BORV<1:0> = 00 417
Power-down Base Current IPD (D006) Sleep mode, Max +85°C IPD 25 µA VDD 2.3V; WDT, BOR, FVR and SOSC disabled, all peripherals inactive 418
Power-down Base Current IPD (D006) Sleep mode, Max +85°C IPD 30 µA VDD 3.0V; WDT, BOR, FVR and SOSC disabled, all peripherals inactive 418
Power-down Base Current IPD (D006) Sleep mode, Max +85°C IPD 35 µA VDD 5.0V; WDT, BOR, FVR and SOSC disabled, all peripherals inactive 418
Power-down Base Current IPD (D006) Sleep mode, Max +125°C IPD 35 µA VDD 2.3V; WDT, BOR, FVR and SOSC disabled, all peripherals inactive 418
Power-down Base Current IPD (D006) Sleep mode, Max +125°C IPD 40 µA VDD 3.0V; WDT, BOR, FVR and SOSC disabled, all peripherals inactive 418
Power-down Base Current IPD (D006) Sleep mode, Max +125°C IPD 50 µA VDD 5.0V; WDT, BOR, FVR and SOSC disabled, all peripherals inactive 418
Watchdog Timer delta IPD (D007), Max +85°C delta IPD 5 µA VDD 2.3V 418
Watchdog Timer delta IPD (D007), Max +125°C delta IPD 5 µA VDD 2.3V 418
Brown-out Reset delta IPD (D008), Max +85°C delta IPD 15 µA VDD 2.3V 418
Brown-out Reset delta IPD (D008), Max +125°C delta IPD 16 µA VDD 2.3V 418
High/Low Voltage Detect delta IPD (D010), Max +85°C delta IPD 15 µA VDD 2.3V 418
High/Low Voltage Detect delta IPD (D010), Max +125°C delta IPD 15 µA VDD 2.3V 418
Secondary Oscillator delta IPD (D011), Max +85°C delta IPD 3 µA 32 kHz on SOSC, VDD 2.3V 418
Secondary Oscillator delta IPD (D011), Max +125°C delta IPD 10 µA 32 kHz on SOSC, VDD 2.3V 418
Secondary Oscillator delta IPD (D011), Max +85°C delta IPD 4 µA 32 kHz on SOSC, VDD 3.0V 418
Secondary Oscillator delta IPD (D011), Max +85°C delta IPD 5 µA 32 kHz on SOSC, VDD 5.0V 418

CAD (KiCad official)

  • Symbol: PIC18F23K22-I
  • Footprint: Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm
  • 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
  • 3D model files: pic18f23k22-i-etched.step / pic18f23k22-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f23k22-i.step / pic18f23k22-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (539 pp, sha256 d0ba745eb6a13bdb, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF