main
Ray
pic18f23k22-e-ss: renamed from pic18f23k22-e, the part it was built from (PIC18F23K22-E/SS); family listed
a98ecf7
PIC18F23K22-E/SS
Microchip Tech · MICROCHIP · SSOP-28-208mil
PIC18F23K22-E from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/VPP/MCLR | input | RE3 is a digital input only when MCLRE = 0; when MCLRE = 1 it is the active-low Master Clear (device Reset) input, and VPP is the programming voltage input. |
| 2 | RA0/C12IN0-/AN0 | bidirectional | Digital I/O (TTL) that also serves as the inverting input for comparators C1 and C2 (C12IN0-) and as analog input AN0. |
| 3 | RA1/C12IN1-/AN1 | bidirectional | Digital I/O (TTL) that also serves as the inverting input for comparators C1 and C2 (C12IN1-) and as analog input AN1. |
| 4 | RA2/C2IN+/AN2/DACOUT/VREF- | bidirectional | Digital I/O (TTL) that also serves as comparator C2 non-inverting input, analog input AN2, DAC reference output DACOUT, and A/D reference voltage (low) input VREF-. |
| 5 | RA3/C1IN+/AN3/VREF+ | bidirectional | Digital I/O (TTL) that also serves as comparator C1 non-inverting input, analog input AN3, and A/D reference voltage (high) input VREF+. |
| 6 | RA4/CCP5/C1OUT/SRQ/T0CKI | bidirectional | Schmitt Trigger digital I/O (default on POR) that also provides Timer0 external clock input T0CKI, comparator C1 output, SR latch Q output, and CCP5 capture/compare/PWM. |
| 7 | RA5/C2OUT/SRNQ/SS1/HLVDIN/AN4 | bidirectional | Digital I/O (TTL) that also provides comparator C2 output, SR latch Q-bar output, MSSP1 SPI slave select SS1, High/Low-Voltage Detect input HLVDIN, and analog input AN4. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | RA7/CLKI/OSC1 | bidirectional | Digital I/O (TTL) multiplexed with the oscillator input; OSC1 is the crystal or external clock input, using an ST buffer in RC mode and CMOS otherwise. |
| 10 | RA6/CLKO/OSC2 | bidirectional | Digital I/O (TTL) that also provides CLKO (FOSC/4 output in RC mode) and OSC2, the crystal oscillator output in Crystal Oscillator mode. |
| 11 | RC0/P2B/T3CKI/T3G/T1CKI/SOSCO | bidirectional | Schmitt Trigger digital I/O that also provides Enhanced PWM output P2B, Timer3 clock input T3CKI, Timer3 gate input T3G, Timer1 clock input T1CKI, and secondary oscillator output SOSCO. |
| 12 | RC1/P2A/CCP2/SOSCI | bidirectional | Schmitt Trigger digital I/O that also provides Enhanced PWM output P2A, CCP2 capture/compare/PWM, and secondary oscillator input SOSCI. |
| 13 | RC2/CTPLS/P1A/CCP1/T5CKI/AN14 | bidirectional | Schmitt Trigger digital I/O that also provides CTMU pulse generator output CTPLS, Enhanced PWM output P1A, CCP1 capture/compare/PWM, Timer5 clock input T5CKI, and analog input AN14. |
| 14 | RC3/SCK1/SCL1/AN15 | bidirectional | Schmitt Trigger digital I/O that also provides MSSP1 SPI clock SCK1, MSSP1 I2C clock SCL1, and analog input AN15. |
| 15 | RC4/SDI1/SDA1/AN16 | bidirectional | Schmitt Trigger digital I/O that also provides MSSP1 SPI data input SDI1, MSSP1 I2C data SDA1, and analog input AN16. |
| 16 | RC5/SDO1/AN17 | bidirectional | Schmitt Trigger digital I/O that also provides MSSP1 SPI data output SDO1 and analog input AN17. |
| 17 | RC6/P3A/CCP3/TX1/CK1/AN18 | bidirectional | Schmitt Trigger digital I/O that also provides Enhanced PWM output P3A, CCP3 capture/compare/PWM, EUSART asynchronous transmit TX1, EUSART synchronous clock CK1, and analog input AN18. |
| 18 | RC7/P3B/RX1/DT1/AN19 | bidirectional | Schmitt Trigger digital I/O that also provides Enhanced PWM output P3B, EUSART asynchronous receive RX1, EUSART synchronous data DT1, and analog input AN19. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins; the datasheet specifies 2.3V to 5.5V operation for PIC18FXXK22 devices. |
| 21 | RB0/INT0/CCP4/FLT0/SRI/SS2/AN12 | bidirectional | Digital I/O (TTL) that also provides external interrupt INT0, CCP4 capture/compare/PWM, ECCP PWM Fault input FLT0, SR latch input SRI, MSSP2 SPI slave select SS2, and analog input AN12. |
| 22 | RB1/INT1/P1C/SCK2/SCL2/C12IN3-/AN10 | bidirectional | Digital I/O (TTL) that also provides external interrupt INT1, Enhanced PWM output P1C, MSSP2 SPI clock SCK2 or I2C clock SCL2, comparator inverting input C12IN3-, and analog input AN10. |
| 23 | RB2/INT2/CTED1/P1B/SDI2/SDA2/AN8 | bidirectional | Digital I/O (TTL) that also provides external interrupt INT2, CTMU Edge 1 input CTED1, Enhanced PWM output P1B, MSSP2 SPI data input SDI2 or I2C data SDA2, and analog input AN8. |
| 24 | RB3/CTED2/P2A/CCP2/SDO2/C12IN2-/AN9 | bidirectional | Digital I/O (TTL) that also provides CTMU Edge 2 input CTED2, Enhanced PWM output P2A, CCP2 capture/compare/PWM, MSSP2 SPI data output SDO2, comparator inverting input C12IN2-, and analog input AN9. |
| 25 | RB4/IOC0/P1D/T5G/AN11 | bidirectional | Digital I/O (TTL) that also provides interrupt-on-change pin IOC0, Enhanced PWM output P1D, Timer5 external clock gate input T5G, and analog input AN11. |
| 26 | RB5/IOC1/P2B/P3A/CCP3/T3CKI/T1G/AN13 | bidirectional | Digital I/O (TTL) that also provides interrupt-on-change pin IOC1, Enhanced PWM outputs P2B and P3A, CCP3 capture/compare/PWM, Timer3 clock input T3CKI, Timer1 external clock gate input T1G, and analog input AN13. |
| 27 | RB6/IOC2/TX2/CK2/PGC | bidirectional | Digital I/O (TTL) that also provides interrupt-on-change pin IOC2, EUSART asynchronous transmit TX2, EUSART synchronous clock CK2, and In-Circuit Debugger/ICSP programming clock PGC. |
| 28 | RB7/IOC3/RX2/DT2/PGD | bidirectional | Digital I/O (TTL) that also provides interrupt-on-change pin IOC3, EUSART asynchronous receive RX2, EUSART synchronous data DT2, and In-Circuit Debugger/ICSP programming data PGD. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | Under bias | 414 | ||
| Storage temperature | -65 | 150 | °C | 414 | |||
| Voltage on any pin with respect to VSS | -0.3 | V | Except VDD and MCLR; upper limit printed as VDD + 0.3V | 414 | |||
| Voltage on MCLR with respect to VSS | 0 | 11 | V | Note 2 (MCLR/VPP/RE3) | 414 | ||
| Total power dissipation | 1 | W | Note 1 | 414 | |||
| Maximum current out of VSS pin | 300 | mA | -40°C to +85°C | 414 | |||
| Maximum current out of VSS pin | 125 | mA | +85°C to +125°C | 414 | |||
| Maximum current into VDD pin | 200 | mA | -40°C to +85°C | 414 | |||
| Maximum current into VDD pin | 85 | mA | +85°C to +125°C | 414 | |||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 414 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 414 | ||
| Maximum current sunk by all ports | 200 | mA | -40°C to +85°C | 414 | |||
| Operating temperature | TA | -40 | 125 | °C | Standard Operating Conditions (extended grade -E) | 417 | |
| Supply Voltage (PIC18F2X/4XK22) | VDD | 2.3 | 5.5 | V | PIC18F variant (not PIC18LF); -40°C ≤ TA ≤ +125°C | 417 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | Lowest VDD in Sleep or during Reset without losing RAM data | 417 | ||
| VDD Start Voltage to ensure internal Power-on Reset signal | VPOR | 0.7 | V | 417 | |||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | 417 | |||
| Brown-out Reset Voltage | VBOR | 1.75 | 1.9 | 2.05 | V | BORV<1:0> = 11 | 417 |
| Brown-out Reset Voltage | VBOR | 2.05 | 2.2 | 2.35 | V | BORV<1:0> = 10 | 417 |
| Brown-out Reset Voltage | VBOR | 2.35 | 2.5 | 2.65 | V | BORV<1:0> = 01 | 417 |
| Brown-out Reset Voltage | VBOR | 2.65 | 2.85 | 3.05 | V | BORV<1:0> = 00 | 417 |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8 mA, VDD = 5V; IOL = 6 mA, VDD = 3.3V | 429 | ||
| Sleep mode power-down base current (D006) | IPD | 25 | µA | Max +85°C; 2.3V; WDT, BOR, FVR and SOSC disabled, all peripherals inactive | 418 | ||
| Sleep mode power-down base current (D006) | IPD | 35 | µA | Max +125°C; 2.3V; WDT, BOR, FVR and SOSC disabled, all peripherals inactive | 418 | ||
| Sleep mode power-down base current (D006) | IPD | 30 | µA | Max +85°C; 3.0V; WDT, BOR, FVR and SOSC disabled, all peripherals inactive | 418 | ||
| Sleep mode power-down base current (D006) | IPD | 40 | µA | Max +125°C; 3.0V; WDT, BOR, FVR and SOSC disabled, all peripherals inactive | 418 | ||
| Sleep mode power-down base current (D006) | IPD | 50 | µA | Max +125°C; 5.0V; WDT, BOR, FVR and SOSC disabled, all peripherals inactive | 418 | ||
| Watchdog Timer power-down delta current (D007) | delta IPD | 5 | µA | Max +85°C; 2.3V | 418 | ||
| Brown-out Reset power-down delta current (D008) | delta IPD | 15 | µA | Max +85°C; 2.3V | 418 | ||
| Brown-out Reset power-down delta current (D008) | delta IPD | 16 | µA | Max +125°C; 2.3V | 418 | ||
| High/Low Voltage Detect power-down delta current (D010) | delta IPD | 15 | µA | Max +85°C; 2.3V | 418 | ||
| Secondary Oscillator 32 kHz power-down delta current (D011) | delta IPD | 3 | µA | Max +85°C; 2.3V; SOSC at 32 kHz | 418 | ||
| Secondary Oscillator 32 kHz power-down delta current (D011) | delta IPD | 10 | µA | Max +125°C; 2.3V; SOSC at 32 kHz | 418 | ||
| Secondary Oscillator 32 kHz power-down delta current (D011) | delta IPD | 4 | µA | Max +85°C; 3.0V; SOSC at 32 kHz | 418 | ||
| Secondary Oscillator 32 kHz power-down delta current (D011) | delta IPD | 5 | µA | Max +85°C; 5.0V; SOSC at 32 kHz | 418 |
CAD (KiCad official)
- Symbol:
PIC18F23K22-E - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic18f23k22-e-etched.step/pic18f23k22-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f23k22-e.step/pic18f23k22-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (539 pp, sha256
dbf68925f53cc096, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC18F23K22-E/SS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC18F23K22-E/ML
# PIC18F23K22-E/SS
**Microchip Tech** · MICROCHIP · SSOP-28-208mil
PIC18F23K22-E from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/VPP/MCLR | input | RE3 is a digital input only when MCLRE = 0; when MCLRE = 1 it is the active-low Master Clear (device Reset) input, and VPP is the programming voltage input. |
| 2 | RA0/C12IN0-/AN0 | bidirectional | Digital I/O (TTL) that also serves as the inverting input for comparators C1 and C2 (C12IN0-) and as analog input AN0. |
| 3 | RA1/C12IN1-/AN1 | bidirectional | Digital I/O (TTL) that also serves as the inverting input for comparators C1 and C2 (C12IN1-) and as analog input AN1. |
| 4 | RA2/C2IN+/AN2/DACOUT/VREF- | bidirectional | Digital I/O (TTL) that also serves as comparator C2 non-inverting input, analog input AN2, DAC reference output DACOUT, and A/D reference voltage (low) input VREF-. |
| 5 | RA3/C1IN+/AN3/VREF+ | bidirectional | Digital I/O (TTL) that also serves as comparator C1 non-inverting input, analog input AN3, and A/D reference voltage (high) input VREF+. |
| 6 | RA4/CCP5/C1OUT/SRQ/T0CKI | bidirectional | Schmitt Trigger digital I/O (default on POR) that also provides Timer0 external clock input T0CKI, comparator C1 output, SR latch Q output, and CCP5 capture/compare/PWM. |
| 7 | RA5/C2OUT/SRNQ/SS1/HLVDIN/AN4 | bidirectional | Digital I/O (TTL) that also provides comparator C2 output, SR latch Q-bar output, MSSP1 SPI slave select SS1, High/Low-Voltage Detect input HLVDIN, and analog input AN4. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | RA7/CLKI/OSC1 | bidirectional | Digital I/O (TTL) multiplexed with the oscillator input; OSC1 is the crystal or external clock input, using an ST buffer in RC mode and CMOS otherwise. |
| 10 | RA6/CLKO/OSC2 | bidirectional | Digital I/O (TTL) that also provides CLKO (FOSC/4 output in RC mode) and OSC2, the crystal oscillator output in Crystal Oscillator mode. |
| 11 | RC0/P2B/T3CKI/T3G/T1CKI/SOSCO | bidirectional | Schmitt Trigger digital I/O that also provides Enhanced PWM output P2B, Timer3 clock input T3CKI, Timer3 gate input T3G, Timer1 clock input T1CKI, and secondary oscillator output SOSCO. |
| 12 | RC1/P2A/CCP2/SOSCI | bidirectional | Schmitt Trigger digital I/O that also provides Enhanced PWM output P2A, CCP2 capture/compare/PWM, and secondary oscillator input SOSCI. |
| 13 | RC2/CTPLS/P1A/CCP1/T5CKI/AN14 | bidirectional | Schmitt Trigger digital I/O that also provides CTMU pulse generator output CTPLS, Enhanced PWM output P1A, CCP1 capture/compare/PWM, Timer5 clock input T5CKI, and analog input AN14. |
| 14 | RC3/SCK1/SCL1/AN15 | bidirectional | Schmitt Trigger digital I/O that also provides MSSP1 SPI clock SCK1, MSSP1 I2C clock SCL1, and analog input AN15. |
| 15 | RC4/SDI1/SDA1/AN16 | bidirectional | Schmitt Trigger digital I/O that also provides MSSP1 SPI data input SDI1, MSSP1 I2C data SDA1, and analog input AN16. |
| 16 | RC5/SDO1/AN17 | bidirectional | Schmitt Trigger digital I/O that also provides MSSP1 SPI data output SDO1 and analog input AN17. |
| 17 | RC6/P3A/CCP3/TX1/CK1/AN18 | bidirectional | Schmitt Trigger digital I/O that also provides Enhanced PWM output P3A, CCP3 capture/compare/PWM, EUSART asynchronous transmit TX1, EUSART synchronous clock CK1, and analog input AN18. |
| 18 | RC7/P3B/RX1/DT1/AN19 | bidirectional | Schmitt Trigger digital I/O that also provides Enhanced PWM output P3B, EUSART asynchronous receive RX1, EUSART synchronous data DT1, and analog input AN19. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins; the datasheet specifies 2.3V to 5.5V operation for PIC18FXXK22 devices. |
| 21 | RB0/INT0/CCP4/FLT0/SRI/SS2/AN12 | bidirectional | Digital I/O (TTL) that also provides external interrupt INT0, CCP4 capture/compare/PWM, ECCP PWM Fault input FLT0, SR latch input SRI, MSSP2 SPI slave select SS2, and analog input AN12. |
| 22 | RB1/INT1/P1C/SCK2/SCL2/C12IN3-/AN10 | bidirectional | Digital I/O (TTL) that also provides external interrupt INT1, Enhanced PWM output P1C, MSSP2 SPI clock SCK2 or I2C clock SCL2, comparator inverting input C12IN3-, and analog input AN10. |
| 23 | RB2/INT2/CTED1/P1B/SDI2/SDA2/AN8 | bidirectional | Digital I/O (TTL) that also provides external interrupt INT2, CTMU Edge 1 input CTED1, Enhanced PWM output P1B, MSSP2 SPI data input SDI2 or I2C data SDA2, and analog input AN8. |
| 24 | RB3/CTED2/P2A/CCP2/SDO2/C12IN2-/AN9 | bidirectional | Digital I/O (TTL) that also provides CTMU Edge 2 input CTED2, Enhanced PWM output P2A, CCP2 capture/compare/PWM, MSSP2 SPI data output SDO2, comparator inverting input C12IN2-, and analog input AN9. |
| 25 | RB4/IOC0/P1D/T5G/AN11 | bidirectional | Digital I/O (TTL) that also provides interrupt-on-change pin IOC0, Enhanced PWM output P1D, Timer5 external clock gate input T5G, and analog input AN11. |
| 26 | RB5/IOC1/P2B/P3A/CCP3/T3CKI/T1G/AN13 | bidirectional | Digital I/O (TTL) that also provides interrupt-on-change pin IOC1, Enhanced PWM outputs P2B and P3A, CCP3 capture/compare/PWM, Timer3 clock input T3CKI, Timer1 external clock gate input T1G, and analog input AN13. |
| 27 | RB6/IOC2/TX2/CK2/PGC | bidirectional | Digital I/O (TTL) that also provides interrupt-on-change pin IOC2, EUSART asynchronous transmit TX2, EUSART synchronous clock CK2, and In-Circuit Debugger/ICSP programming clock PGC. |
| 28 | RB7/IOC3/RX2/DT2/PGD | bidirectional | Digital I/O (TTL) that also provides interrupt-on-change pin IOC3, EUSART asynchronous receive RX2, EUSART synchronous data DT2, and In-Circuit Debugger/ICSP programming data PGD. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | | -40 | | 125 | °C | Under bias | 414 |
| Storage temperature | | -65 | | 150 | °C | | 414 |
| Voltage on any pin with respect to VSS | | -0.3 | | | V | Except VDD and MCLR; upper limit printed as VDD + 0.3V | 414 |
| Voltage on MCLR with respect to VSS | | 0 | | 11 | V | Note 2 (MCLR/VPP/RE3) | 414 |
| Total power dissipation | | | | 1 | W | Note 1 | 414 |
| Maximum current out of VSS pin | | | | 300 | mA | -40°C to +85°C | 414 |
| Maximum current out of VSS pin | | | | 125 | mA | +85°C to +125°C | 414 |
| Maximum current into VDD pin | | | | 200 | mA | -40°C to +85°C | 414 |
| Maximum current into VDD pin | | | | 85 | mA | +85°C to +125°C | 414 |
| Input clamp current | IIK | | | 20 | mA | VI < 0 or VI > VDD | 414 |
| Output clamp current | IOK | | | 20 | mA | VO < 0 or VO > VDD | 414 |
| Maximum current sunk by all ports | | | | 200 | mA | -40°C to +85°C | 414 |
| Operating temperature | TA | -40 | | 125 | °C | Standard Operating Conditions (extended grade -E) | 417 |
| Supply Voltage (PIC18F2X/4XK22) | VDD | 2.3 | | 5.5 | V | PIC18F variant (not PIC18LF); -40°C ≤ TA ≤ +125°C | 417 |
| RAM Data Retention Voltage | VDR | 1.5 | | | V | Lowest VDD in Sleep or during Reset without losing RAM data | 417 |
| VDD Start Voltage to ensure internal Power-on Reset signal | VPOR | | | 0.7 | V | | 417 |
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | | | V/ms | | 417 |
| Brown-out Reset Voltage | VBOR | 1.75 | 1.9 | 2.05 | V | BORV<1:0> = 11 | 417 |
| Brown-out Reset Voltage | VBOR | 2.05 | 2.2 | 2.35 | V | BORV<1:0> = 10 | 417 |
| Brown-out Reset Voltage | VBOR | 2.35 | 2.5 | 2.65 | V | BORV<1:0> = 01 | 417 |
| Brown-out Reset Voltage | VBOR | 2.65 | 2.85 | 3.05 | V | BORV<1:0> = 00 | 417 |
| Output Low Voltage, I/O ports | VOL | | | 0.6 | V | IOL = 8 mA, VDD = 5V; IOL = 6 mA, VDD = 3.3V | 429 |
| Sleep mode power-down base current (D006) | IPD | | | 25 | µA | Max +85°C; 2.3V; WDT, BOR, FVR and SOSC disabled, all peripherals inactive | 418 |
| Sleep mode power-down base current (D006) | IPD | | | 35 | µA | Max +125°C; 2.3V; WDT, BOR, FVR and SOSC disabled, all peripherals inactive | 418 |
| Sleep mode power-down base current (D006) | IPD | | | 30 | µA | Max +85°C; 3.0V; WDT, BOR, FVR and SOSC disabled, all peripherals inactive | 418 |
| Sleep mode power-down base current (D006) | IPD | | | 40 | µA | Max +125°C; 3.0V; WDT, BOR, FVR and SOSC disabled, all peripherals inactive | 418 |
| Sleep mode power-down base current (D006) | IPD | | | 50 | µA | Max +125°C; 5.0V; WDT, BOR, FVR and SOSC disabled, all peripherals inactive | 418 |
| Watchdog Timer power-down delta current (D007) | delta IPD | | | 5 | µA | Max +85°C; 2.3V | 418 |
| Brown-out Reset power-down delta current (D008) | delta IPD | | | 15 | µA | Max +85°C; 2.3V | 418 |
| Brown-out Reset power-down delta current (D008) | delta IPD | | | 16 | µA | Max +125°C; 2.3V | 418 |
| High/Low Voltage Detect power-down delta current (D010) | delta IPD | | | 15 | µA | Max +85°C; 2.3V | 418 |
| Secondary Oscillator 32 kHz power-down delta current (D011) | delta IPD | | | 3 | µA | Max +85°C; 2.3V; SOSC at 32 kHz | 418 |
| Secondary Oscillator 32 kHz power-down delta current (D011) | delta IPD | | | 10 | µA | Max +125°C; 2.3V; SOSC at 32 kHz | 418 |
| Secondary Oscillator 32 kHz power-down delta current (D011) | delta IPD | | | 4 | µA | Max +85°C; 3.0V; SOSC at 32 kHz | 418 |
| Secondary Oscillator 32 kHz power-down delta current (D011) | delta IPD | | | 5 | µA | Max +85°C; 5.0V; SOSC at 32 kHz | 418 |
## CAD (KiCad official)
- Symbol: `PIC18F23K22-E`
- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`
- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files: `pic18f23k22-e-etched.step` / `pic18f23k22-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic18f23k22-e.step` / `pic18f23k22-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic18f23k22-e-datasheet.pdf) (539 pp, sha256 `dbf68925f53cc096`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic18f23k22-e-datasheet.pdf)
## Other parts in this family
This page is **PIC18F23K22-E/SS**. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC18F23K22-E/ML