Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18F1330-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-18-300mil
PIC18F1330-I from Microchip Tech, in a SOIC-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA0/AN0/INT0/KBI0/CMP0 | bidirectional | Digital I/O (TTL) that also serves as analog input 0, external interrupt 0 (INT0), interrupt-on-change KBI0 and comparator 0 input (CMP0). |
| 2 | RA1/AN1/INT1/KBI1 | bidirectional | Digital I/O (TTL) that also serves as analog input 1, external interrupt 1 (INT1) and interrupt-on-change KBI1. |
| 3 | RA4/T0CKI/AN2/VREF+ | bidirectional | Digital I/O (Schmitt Trigger input) that also serves as Timer0 external clock input (T0CKI), analog input 2 and A/D reference voltage (high) input (VREF+). |
| 4 | MCLR/VPP/RA5/FLTA | input | Active-low Master Clear (Reset) input to the device; the same pin can also be used as programming voltage input (VPP), digital input RA5 (when MCLR is disabled) or PWM Fault detect input FLTA. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins; the same pin number is also listed as the ground reference for the A/D converter (AVSS). |
| 6 | RA2/TX/CK | bidirectional | Digital I/O (TTL) that also serves as EUSART asynchronous transmit (TX) and EUSART synchronous clock (CK). |
| 7 | RA3/RX/DT | bidirectional | Digital I/O (TTL) that also serves as EUSART asynchronous receive (RX) and EUSART synchronous data (DT). |
| 8 | RB0/PWM0 | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as Power Control PWM output PWM0. |
| 9 | RB1/PWM1 | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as Power Control PWM output PWM1. |
| 10 | RB4/PWM2 | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as Power Control PWM output PWM2. |
| 11 | RB5/PWM3 | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as Power Control PWM output PWM3. |
| 12 | RB6/PWM4/PGC | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as PWM output PWM4 and the In-Circuit Debugger and ICSP programming clock pin (PGC). |
| 13 | RB7/PWM5/PGD | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as PWM output PWM5 and the In-Circuit Debugger and ICSP programming data pin (PGD). |
| 14 | VDD | power_in | Positive supply for logic and I/O pins; the same pin number is also listed as the positive supply for the A/D converter (AVDD). Standard F devices operate at 4.2V to 5.5V VDD. |
| 15 | RA6/OSC2/CLKO/T1OSO/T1CKI/AN3 | bidirectional | Digital I/O (enabled only in RCIO, INTIO2 and ECIO modes) that otherwise serves as oscillator crystal output or clock output (OSC2/CLKO), Timer1 oscillator output (T1OSO), Timer1 clock input (T1CKI) and analog input 3 (AN3). |
| 16 | RA7/OSC1/CLKI/T1OSI/FLTA | bidirectional | Digital I/O (disabled in external oscillator modes) that otherwise serves as oscillator crystal input or external clock input (OSC1/CLKI), Timer1 oscillator input (T1OSI) and PWM Fault detect input FLTA. |
| 17 | RB2/INT2/KBI2/CMP2/T1OSO/T1CKI | bidirectional | Digital I/O (TTL) that also serves as external interrupt 2 (INT2), interrupt-on-change KBI2, comparator 2 input (CMP2), Timer1 oscillator output (T1OSO) and Timer1 clock input (T1CKI). |
| 18 | RB3/INT3/KBI3/CMP1/T1OSI | bidirectional | Digital I/O (TTL) that also serves as external interrupt 3 (INT3), interrupt-on-change KBI3, comparator 1 input (CMP1) and Timer1 oscillator input (T1OSI). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-18-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating VDD (standard F device, PIC18F1330) | VDD | 4.2 | 5.5 | V | Standard 'F' devices such as PIC18F1330; text states operating VDD range 4.2V to 5.5V | 10 | |
| Operating frequency | 40 | MHz | Table 1-1 prints 'DC, 40 MHz' for PIC18F1330; lower bound given as DC, no numeric min printed | 11 | |||
| High-current sink/source | 25 | mA | Peripheral highlight printed as '25 mA/25 mA' (sink/source); not from a DC characteristics table | 3 | |||
| Maximum recommended analog source impedance (A/D) | RS | 2.5 | kΩ | A/D analog input source; text states maximum recommended impedance for analog sources | 174 | ||
| Maximum recommended analog source impedance (comparator) | RS | 10 | kΩ | Comparator analog input source; text states maximum recommended source impedance | 181 |
CAD (KiCad official)
- Symbol:
PIC18F1330-I - Footprint:
Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm - 3D model: SOIC-18-300mil (KiCad packages3D, STEP)
- 3D model files:
pic18f1330-i-so-etched.step/pic18f1330-i-so-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f1330-i-so.step/pic18f1330-i-so.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (318 pp, sha256
ea57344e1791ba9b, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).