← Commit history
README.md+25−22
@@ -2,30 +2,30 @@  **Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-18-300mil -PIC18F1330-I from Microchip Tech, in a SOIC-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+PIC18F1330-I from Microchip Tech, in a SOIC-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | RA0/AN0/INT0/KBI0/CMP0 | bidirectional | Digital I/O (TTL) that is multiplexed with analog input AN0, external interrupt INT0, interrupt-on-change KBI0 and comparator 0 input CMP0. |-| 2 | RA1/AN1/INT1/KBI1 | bidirectional | Digital I/O (TTL) that is multiplexed with analog input AN1, external interrupt INT1 (Schmitt trigger) and interrupt-on-change KBI1. |-| 3 | RA4/T0CKI/AN2/VREF+ | bidirectional | Digital I/O (default configuration on POR) that is multiplexed with the Timer0 external clock input T0CKI (Schmitt trigger), analog input AN2 and the A/D reference voltage (high) input VREF+. |-| 4 | MCLR/VPP/RA5/FLTA | input | Master Clear (Reset) input that is an active-low Reset to the device; the pin also serves as programming voltage input VPP, digital input RA5 (only when MCLR is disabled) or PWM Fault detect input FLTA. |-| 5 | VSS | power_in | Ground reference for logic and I/O pins; this pin is shared with AVSS, the ground reference for the A/D converter module. |-| 6 | RA2/TX/CK | bidirectional | Digital I/O (TTL) that is multiplexed with the EUSART asynchronous transmit TX output and the EUSART synchronous clock CK. |-| 7 | RA3/RX/DT | bidirectional | Digital I/O (TTL) that is multiplexed with the EUSART asynchronous receive RX input and the EUSART synchronous data DT. |-| 8 | RB0/PWM0 | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM0. |-| 9 | RB1/PWM1 | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM1. |-| 10 | RB4/PWM2 | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM2. |-| 11 | RB5/PWM3 | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM3. |-| 12 | RB6/PWM4/PGC | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM4 and the In-Circuit Debugger and ICSP programming clock pin PGC (Schmitt trigger input). |-| 13 | RB7/PWM5/PGD | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM5 and the In-Circuit Debugger and ICSP programming data pin PGD. |-| 14 | VDD | power_in | Positive supply for logic and I/O pins; this pin is shared with AVDD, the supply for the A/D converter module. |-| 15 | RA6/OSC2/CLKO/T1OSO/T1CKI/AN3 | bidirectional | Digital I/O only in RCIO, INTIO2 and ECIO oscillator modes; otherwise it is the oscillator crystal output OSC2 or CLKO, the Timer1 oscillator output T1OSO, the Timer1 clock input T1CKI or analog input AN3. |-| 16 | RA7/OSC1/CLKI/T1OSI/FLTA | bidirectional | Digital I/O (disabled in external oscillator modes) that is multiplexed with oscillator crystal input OSC1 or external clock input CLKI, Timer1 oscillator input T1OSI and PWM Fault detect input FLTA. |-| 17 | RB2/INT2/KBI2/CMP2/T1OSO/T1CKI | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with external interrupt INT2, interrupt-on-change KBI2, comparator 2 input CMP2, Timer1 oscillator output T1OSO and Timer1 clock input T1CKI. |-| 18 | RB3/INT3/KBI3/CMP1/T1OSI | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with external interrupt INT3, interrupt-on-change KBI3, comparator 1 input CMP1 and Timer1 oscillator input T1OSI. |+| 1 | RA0/AN0/INT0/KBI0/CMP0 | bidirectional | Digital I/O (TTL) that also serves as analog input 0, external interrupt 0 (INT0), interrupt-on-change KBI0 and comparator 0 input (CMP0). |+| 2 | RA1/AN1/INT1/KBI1 | bidirectional | Digital I/O (TTL) that also serves as analog input 1, external interrupt 1 (INT1) and interrupt-on-change KBI1. |+| 3 | RA4/T0CKI/AN2/VREF+ | bidirectional | Digital I/O (Schmitt Trigger input) that also serves as Timer0 external clock input (T0CKI), analog input 2 and A/D reference voltage (high) input (VREF+). |+| 4 | MCLR/VPP/RA5/FLTA | input | Active-low Master Clear (Reset) input to the device; the same pin can also be used as programming voltage input (VPP), digital input RA5 (when MCLR is disabled) or PWM Fault detect input FLTA. |+| 5 | VSS | power_in | Ground reference for logic and I/O pins; the same pin number is also listed as the ground reference for the A/D converter (AVSS). |+| 6 | RA2/TX/CK | bidirectional | Digital I/O (TTL) that also serves as EUSART asynchronous transmit (TX) and EUSART synchronous clock (CK). |+| 7 | RA3/RX/DT | bidirectional | Digital I/O (TTL) that also serves as EUSART asynchronous receive (RX) and EUSART synchronous data (DT). |+| 8 | RB0/PWM0 | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as Power Control PWM output PWM0. |+| 9 | RB1/PWM1 | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as Power Control PWM output PWM1. |+| 10 | RB4/PWM2 | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as Power Control PWM output PWM2. |+| 11 | RB5/PWM3 | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as Power Control PWM output PWM3. |+| 12 | RB6/PWM4/PGC | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as PWM output PWM4 and the In-Circuit Debugger and ICSP programming clock pin (PGC). |+| 13 | RB7/PWM5/PGD | bidirectional | Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as PWM output PWM5 and the In-Circuit Debugger and ICSP programming data pin (PGD). |+| 14 | VDD | power_in | Positive supply for logic and I/O pins; the same pin number is also listed as the positive supply for the A/D converter (AVDD). Standard F devices operate at 4.2V to 5.5V VDD. |+| 15 | RA6/OSC2/CLKO/T1OSO/T1CKI/AN3 | bidirectional | Digital I/O (enabled only in RCIO, INTIO2 and ECIO modes) that otherwise serves as oscillator crystal output or clock output (OSC2/CLKO), Timer1 oscillator output (T1OSO), Timer1 clock input (T1CKI) and analog input 3 (AN3). |+| 16 | RA7/OSC1/CLKI/T1OSI/FLTA | bidirectional | Digital I/O (disabled in external oscillator modes) that otherwise serves as oscillator crystal input or external clock input (OSC1/CLKI), Timer1 oscillator input (T1OSI) and PWM Fault detect input FLTA. |+| 17 | RB2/INT2/KBI2/CMP2/T1OSO/T1CKI | bidirectional | Digital I/O (TTL) that also serves as external interrupt 2 (INT2), interrupt-on-change KBI2, comparator 2 input (CMP2), Timer1 oscillator output (T1OSO) and Timer1 clock input (T1CKI). |+| 18 | RB3/INT3/KBI3/CMP1/T1OSI | bidirectional | Digital I/O (TTL) that also serves as external interrupt 3 (INT3), interrupt-on-change KBI3, comparator 1 input (CMP1) and Timer1 oscillator input (T1OSI). |  ## Key specifications @@ -42,8 +42,11 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Operating frequency (maximum) |  |  |  | 40 | MHz | Device features table 1-1, printed as 'DC, 40 MHz' for PIC18F1330 | 11 |-| Operating VDD range, standard F device | VDD | 4.2 |  | 5.5 | V | Standard F device (PIC18F1330, not the LF low-voltage sibling) | 10 |+| Operating VDD (standard F device, PIC18F1330) | VDD | 4.2 |  | 5.5 | V | Standard 'F' devices such as PIC18F1330; text states operating VDD range 4.2V to 5.5V | 10 |+| Operating frequency |  |  |  | 40 | MHz | Table 1-1 prints 'DC, 40 MHz' for PIC18F1330; lower bound given as DC, no numeric min printed | 11 |+| High-current sink/source |  |  |  | 25 | mA | Peripheral highlight printed as '25 mA/25 mA' (sink/source); not from a DC characteristics table | 3 |+| Maximum recommended analog source impedance (A/D) | RS |  |  | 2.5 | kΩ | A/D analog input source; text states maximum recommended impedance for analog sources | 174 |+| Maximum recommended analog source impedance (comparator) | RS |  |  | 10 | kΩ | Comparator analog input source; text states maximum recommended source impedance | 181 |  ## CAD (KiCad official) @@ -56,7 +59,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/39758D.pdf) (318 pp, sha256 `ea57344e1791ba9b`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/39758D.pdf) (318 pp, sha256 `ea57344e1791ba9b`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+30−31
@@ -1,6 +1,6 @@ {   "slug": "pic18f1330-i-so",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-18-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pic18f1330-i-so-hero.glb",-    "pic18f1330-i-so-hero.overlay.json",-    "pic18f1330-i-so-etched.glb"+    "pic18f1330-i-so-hero.overlay.json"   ],   "component": {     "mpn": "PIC18F1330-I/SO",@@ -43,7 +42,7 @@       "symbol": "pic18f1330-i-so.kicad_sym",       "footprint": "pic18f1330-i-so.kicad_mod",       "model_3d": "pic18f1330-i-so-hero.glb",-      "model_3d_plain": "pic18f1330-i-so-etched.glb",+      "model_3d_plain": "pic18f1330-i-so.glb",       "model_3d_step": "pic18f1330-i-so-etched.step",       "model_3d_step_plain": "pic18f1330-i-so.step",       "lbr": "pic18f1330-i-so.lbr"@@ -54,7 +53,7 @@       "mouser": "579-PIC18F1330-I/SO"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:57:17Z",+      "checked_at": "2026-11-17T18:21:25Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC18F1330-I/SO-ND",@@ -71,109 +70,109 @@         "number": "1",         "name": "RA0/AN0/INT0/KBI0/CMP0",         "type": "bidirectional",-        "description": "Digital I/O (TTL) that is multiplexed with analog input AN0, external interrupt INT0, interrupt-on-change KBI0 and comparator 0 input CMP0."+        "description": "Digital I/O (TTL) that also serves as analog input 0, external interrupt 0 (INT0), interrupt-on-change KBI0 and comparator 0 input (CMP0)."       },       {         "number": "2",         "name": "RA1/AN1/INT1/KBI1",         "type": "bidirectional",-        "description": "Digital I/O (TTL) that is multiplexed with analog input AN1, external interrupt INT1 (Schmitt trigger) and interrupt-on-change KBI1."+        "description": "Digital I/O (TTL) that also serves as analog input 1, external interrupt 1 (INT1) and interrupt-on-change KBI1."       },       {         "number": "3",         "name": "RA4/T0CKI/AN2/VREF+",         "type": "bidirectional",-        "description": "Digital I/O (default configuration on POR) that is multiplexed with the Timer0 external clock input T0CKI (Schmitt trigger), analog input AN2 and the A/D reference voltage (high) input VREF+."+        "description": "Digital I/O (Schmitt Trigger input) that also serves as Timer0 external clock input (T0CKI), analog input 2 and A/D reference voltage (high) input (VREF+)."       },       {         "number": "4",         "name": "MCLR/VPP/RA5/FLTA",         "type": "input",-        "description": "Master Clear (Reset) input that is an active-low Reset to the device; the pin also serves as programming voltage input VPP, digital input RA5 (only when MCLR is disabled) or PWM Fault detect input FLTA."+        "description": "Active-low Master Clear (Reset) input to the device; the same pin can also be used as programming voltage input (VPP), digital input RA5 (when MCLR is disabled) or PWM Fault detect input FLTA."       },       {         "number": "5",         "name": "VSS",         "type": "power_in",-        "description": "Ground reference for logic and I/O pins; this pin is shared with AVSS, the ground reference for the A/D converter module."+        "description": "Ground reference for logic and I/O pins; the same pin number is also listed as the ground reference for the A/D converter (AVSS)."       },       {         "number": "6",         "name": "RA2/TX/CK",         "type": "bidirectional",-        "description": "Digital I/O (TTL) that is multiplexed with the EUSART asynchronous transmit TX output and the EUSART synchronous clock CK."+        "description": "Digital I/O (TTL) that also serves as EUSART asynchronous transmit (TX) and EUSART synchronous clock (CK)."       },       {         "number": "7",         "name": "RA3/RX/DT",         "type": "bidirectional",-        "description": "Digital I/O (TTL) that is multiplexed with the EUSART asynchronous receive RX input and the EUSART synchronous data DT."+        "description": "Digital I/O (TTL) that also serves as EUSART asynchronous receive (RX) and EUSART synchronous data (DT)."       },       {         "number": "8",         "name": "RB0/PWM0",         "type": "bidirectional",-        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM0."+        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as Power Control PWM output PWM0."       },       {         "number": "9",         "name": "RB1/PWM1",         "type": "bidirectional",-        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM1."+        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as Power Control PWM output PWM1."       },       {         "number": "10",         "name": "RB4/PWM2",         "type": "bidirectional",-        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM2."+        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as Power Control PWM output PWM2."       },       {         "number": "11",         "name": "RB5/PWM3",         "type": "bidirectional",-        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM3."+        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as Power Control PWM output PWM3."       },       {         "number": "12",         "name": "RB6/PWM4/PGC",         "type": "bidirectional",-        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM4 and the In-Circuit Debugger and ICSP programming clock pin PGC (Schmitt trigger input)."+        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as PWM output PWM4 and the In-Circuit Debugger and ICSP programming clock pin (PGC)."       },       {         "number": "13",         "name": "RB7/PWM5/PGD",         "type": "bidirectional",-        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM5 and the In-Circuit Debugger and ICSP programming data pin PGD."+        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as PWM output PWM5 and the In-Circuit Debugger and ICSP programming data pin (PGD)."       },       {         "number": "14",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply for logic and I/O pins; this pin is shared with AVDD, the supply for the A/D converter module."+        "description": "Positive supply for logic and I/O pins; the same pin number is also listed as the positive supply for the A/D converter (AVDD). Standard F devices operate at 4.2V to 5.5V VDD."       },       {         "number": "15",         "name": "RA6/OSC2/CLKO/T1OSO/T1CKI/AN3",         "type": "bidirectional",-        "description": "Digital I/O only in RCIO, INTIO2 and ECIO oscillator modes; otherwise it is the oscillator crystal output OSC2 or CLKO, the Timer1 oscillator output T1OSO, the Timer1 clock input T1CKI or analog input AN3."+        "description": "Digital I/O (enabled only in RCIO, INTIO2 and ECIO modes) that otherwise serves as oscillator crystal output or clock output (OSC2/CLKO), Timer1 oscillator output (T1OSO), Timer1 clock input (T1CKI) and analog input 3 (AN3)."       },       {         "number": "16",         "name": "RA7/OSC1/CLKI/T1OSI/FLTA",         "type": "bidirectional",-        "description": "Digital I/O (disabled in external oscillator modes) that is multiplexed with oscillator crystal input OSC1 or external clock input CLKI, Timer1 oscillator input T1OSI and PWM Fault detect input FLTA."+        "description": "Digital I/O (disabled in external oscillator modes) that otherwise serves as oscillator crystal input or external clock input (OSC1/CLKI), Timer1 oscillator input (T1OSI) and PWM Fault detect input FLTA."       },       {         "number": "17",         "name": "RB2/INT2/KBI2/CMP2/T1OSO/T1CKI",         "type": "bidirectional",-        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with external interrupt INT2, interrupt-on-change KBI2, comparator 2 input CMP2, Timer1 oscillator output T1OSO and Timer1 clock input T1CKI."+        "description": "Digital I/O (TTL) that also serves as external interrupt 2 (INT2), interrupt-on-change KBI2, comparator 2 input (CMP2), Timer1 oscillator output (T1OSO) and Timer1 clock input (T1CKI)."       },       {         "number": "18",         "name": "RB3/INT3/KBI3/CMP1/T1OSI",         "type": "bidirectional",-        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with external interrupt INT3, interrupt-on-change KBI3, comparator 1 input CMP1 and Timer1 oscillator input T1OSI."+        "description": "Digital I/O (TTL) that also serves as external interrupt 3 (INT3), interrupt-on-change KBI3, comparator 1 input (CMP1) and Timer1 oscillator input (T1OSI)."       }     ],     "provenance": {@@ -187,12 +186,12 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: On the 18-pin SOIC, the shared column in Table 1-2 (PDIP, SOIC) gives one pin number for VSS and AVS; Table 1-2 prints the pin numbers as three values per row without labels. The first value is the PDIP; Pin types are inferred from the Table 10-1/10-3 I/O summaries and the Table 1-2 buffer types. MCLR (",+          "extractor flagged: The SOIC package drawing and dimensions (the 300 mil SOIC outline) are not in the supplied text exce; Table 1-2 lists PDIP and SOIC in a single column, so the SOIC pin numbers are taken from the PDIP/SO; AVSS and AVDD share the same printed pin numbers as VSS (5) and VDD (14) on the 18-pin packages, so ",           "1/18 pins cited to the wrong page (name found elsewhere): ['7:RA3/RX/DT@p14']"         ],-        "pages_sent": 60,-        "cost_usd": 0.3143,-        "at": "2026-11-12T04:56:46"+        "pages_sent": 61,+        "cost_usd": 0.3198,+        "at": "2026-11-17T18:20:52"       },       "datasheet": {         "url": "https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/39758D.pdf",@@ -229,7 +228,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "05ad7d4945131c76ec7b9448dd9cbb5376b56adcd564c58d93e50ca7870fab1f",-        "checked": "2026-11-12",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -247,13 +246,13 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "0fe54d35cbf70e0014ab89bc885cca75b003f82a11d7fecb01a2e834454cda1c",-        "checked": "2026-11-12",+        "sha256": "29e8ef11c4e66d38a989fa81e10dd3bd5964ced0c7b61462b3e3288102d2395b",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "SO",+      "package_code": "SO (SOIC-18, Wide 7.50 mm body)",       "source_page": 297,       "D": {         "nom_mm": 11.55,
page.json+33−32
@@ -4,7 +4,7 @@   "slug": "pic18f1330-i-so",   "title": "PIC18F1330-I/SO",   "brief": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-18-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -25,7 +25,7 @@       "symbol": "pic18f1330-i-so.kicad_sym",       "footprint": "pic18f1330-i-so.kicad_mod",       "model_3d": "pic18f1330-i-so-hero.glb",-      "model_3d_plain": "pic18f1330-i-so-etched.glb",+      "model_3d_plain": "pic18f1330-i-so.glb",       "model_3d_step": "pic18f1330-i-so-etched.step",       "model_3d_step_plain": "pic18f1330-i-so.step",       "lbr": "pic18f1330-i-so.lbr"@@ -36,7 +36,7 @@       "mouser": "579-PIC18F1330-I/SO"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:57:17Z",+      "checked_at": "2026-11-17T18:21:25Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC18F1330-I/SO-ND",@@ -53,109 +53,109 @@         "number": "1",         "name": "RA0/AN0/INT0/KBI0/CMP0",         "type": "bidirectional",-        "description": "Digital I/O (TTL) that is multiplexed with analog input AN0, external interrupt INT0, interrupt-on-change KBI0 and comparator 0 input CMP0."+        "description": "Digital I/O (TTL) that also serves as analog input 0, external interrupt 0 (INT0), interrupt-on-change KBI0 and comparator 0 input (CMP0)."       },       {         "number": "2",         "name": "RA1/AN1/INT1/KBI1",         "type": "bidirectional",-        "description": "Digital I/O (TTL) that is multiplexed with analog input AN1, external interrupt INT1 (Schmitt trigger) and interrupt-on-change KBI1."+        "description": "Digital I/O (TTL) that also serves as analog input 1, external interrupt 1 (INT1) and interrupt-on-change KBI1."       },       {         "number": "3",         "name": "RA4/T0CKI/AN2/VREF+",         "type": "bidirectional",-        "description": "Digital I/O (default configuration on POR) that is multiplexed with the Timer0 external clock input T0CKI (Schmitt trigger), analog input AN2 and the A/D reference voltage (high) input VREF+."+        "description": "Digital I/O (Schmitt Trigger input) that also serves as Timer0 external clock input (T0CKI), analog input 2 and A/D reference voltage (high) input (VREF+)."       },       {         "number": "4",         "name": "MCLR/VPP/RA5/FLTA",         "type": "input",-        "description": "Master Clear (Reset) input that is an active-low Reset to the device; the pin also serves as programming voltage input VPP, digital input RA5 (only when MCLR is disabled) or PWM Fault detect input FLTA."+        "description": "Active-low Master Clear (Reset) input to the device; the same pin can also be used as programming voltage input (VPP), digital input RA5 (when MCLR is disabled) or PWM Fault detect input FLTA."       },       {         "number": "5",         "name": "VSS",         "type": "power_in",-        "description": "Ground reference for logic and I/O pins; this pin is shared with AVSS, the ground reference for the A/D converter module."+        "description": "Ground reference for logic and I/O pins; the same pin number is also listed as the ground reference for the A/D converter (AVSS)."       },       {         "number": "6",         "name": "RA2/TX/CK",         "type": "bidirectional",-        "description": "Digital I/O (TTL) that is multiplexed with the EUSART asynchronous transmit TX output and the EUSART synchronous clock CK."+        "description": "Digital I/O (TTL) that also serves as EUSART asynchronous transmit (TX) and EUSART synchronous clock (CK)."       },       {         "number": "7",         "name": "RA3/RX/DT",         "type": "bidirectional",-        "description": "Digital I/O (TTL) that is multiplexed with the EUSART asynchronous receive RX input and the EUSART synchronous data DT."+        "description": "Digital I/O (TTL) that also serves as EUSART asynchronous receive (RX) and EUSART synchronous data (DT)."       },       {         "number": "8",         "name": "RB0/PWM0",         "type": "bidirectional",-        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM0."+        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as Power Control PWM output PWM0."       },       {         "number": "9",         "name": "RB1/PWM1",         "type": "bidirectional",-        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM1."+        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as Power Control PWM output PWM1."       },       {         "number": "10",         "name": "RB4/PWM2",         "type": "bidirectional",-        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM2."+        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as Power Control PWM output PWM2."       },       {         "number": "11",         "name": "RB5/PWM3",         "type": "bidirectional",-        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM3."+        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as Power Control PWM output PWM3."       },       {         "number": "12",         "name": "RB6/PWM4/PGC",         "type": "bidirectional",-        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM4 and the In-Circuit Debugger and ICSP programming clock pin PGC (Schmitt trigger input)."+        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as PWM output PWM4 and the In-Circuit Debugger and ICSP programming clock pin (PGC)."       },       {         "number": "13",         "name": "RB7/PWM5/PGD",         "type": "bidirectional",-        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with PWM module output PWM5 and the In-Circuit Debugger and ICSP programming data pin PGD."+        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that also serves as PWM output PWM5 and the In-Circuit Debugger and ICSP programming data pin (PGD)."       },       {         "number": "14",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply for logic and I/O pins; this pin is shared with AVDD, the supply for the A/D converter module."+        "description": "Positive supply for logic and I/O pins; the same pin number is also listed as the positive supply for the A/D converter (AVDD). Standard F devices operate at 4.2V to 5.5V VDD."       },       {         "number": "15",         "name": "RA6/OSC2/CLKO/T1OSO/T1CKI/AN3",         "type": "bidirectional",-        "description": "Digital I/O only in RCIO, INTIO2 and ECIO oscillator modes; otherwise it is the oscillator crystal output OSC2 or CLKO, the Timer1 oscillator output T1OSO, the Timer1 clock input T1CKI or analog input AN3."+        "description": "Digital I/O (enabled only in RCIO, INTIO2 and ECIO modes) that otherwise serves as oscillator crystal output or clock output (OSC2/CLKO), Timer1 oscillator output (T1OSO), Timer1 clock input (T1CKI) and analog input 3 (AN3)."       },       {         "number": "16",         "name": "RA7/OSC1/CLKI/T1OSI/FLTA",         "type": "bidirectional",-        "description": "Digital I/O (disabled in external oscillator modes) that is multiplexed with oscillator crystal input OSC1 or external clock input CLKI, Timer1 oscillator input T1OSI and PWM Fault detect input FLTA."+        "description": "Digital I/O (disabled in external oscillator modes) that otherwise serves as oscillator crystal input or external clock input (OSC1/CLKI), Timer1 oscillator input (T1OSI) and PWM Fault detect input FLTA."       },       {         "number": "17",         "name": "RB2/INT2/KBI2/CMP2/T1OSO/T1CKI",         "type": "bidirectional",-        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with external interrupt INT2, interrupt-on-change KBI2, comparator 2 input CMP2, Timer1 oscillator output T1OSO and Timer1 clock input T1CKI."+        "description": "Digital I/O (TTL) that also serves as external interrupt 2 (INT2), interrupt-on-change KBI2, comparator 2 input (CMP2), Timer1 oscillator output (T1OSO) and Timer1 clock input (T1CKI)."       },       {         "number": "18",         "name": "RB3/INT3/KBI3/CMP1/T1OSI",         "type": "bidirectional",-        "description": "Digital I/O (TTL, weak pull-up when RBPU is cleared) that is multiplexed with external interrupt INT3, interrupt-on-change KBI3, comparator 1 input CMP1 and Timer1 oscillator input T1OSI."+        "description": "Digital I/O (TTL) that also serves as external interrupt 3 (INT3), interrupt-on-change KBI3, comparator 1 input (CMP1) and Timer1 oscillator input (T1OSI)."       }     ],     "provenance": {@@ -169,12 +169,12 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: On the 18-pin SOIC, the shared column in Table 1-2 (PDIP, SOIC) gives one pin number for VSS and AVS; Table 1-2 prints the pin numbers as three values per row without labels. The first value is the PDIP; Pin types are inferred from the Table 10-1/10-3 I/O summaries and the Table 1-2 buffer types. MCLR (",+          "extractor flagged: The SOIC package drawing and dimensions (the 300 mil SOIC outline) are not in the supplied text exce; Table 1-2 lists PDIP and SOIC in a single column, so the SOIC pin numbers are taken from the PDIP/SO; AVSS and AVDD share the same printed pin numbers as VSS (5) and VDD (14) on the 18-pin packages, so ",           "1/18 pins cited to the wrong page (name found elsewhere): ['7:RA3/RX/DT@p14']"         ],-        "pages_sent": 60,-        "cost_usd": 0.3143,-        "at": "2026-11-12T04:56:46"+        "pages_sent": 61,+        "cost_usd": 0.3198,+        "at": "2026-11-17T18:20:52"       },       "datasheet": {         "url": "https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/39758D.pdf",@@ -211,7 +211,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "05ad7d4945131c76ec7b9448dd9cbb5376b56adcd564c58d93e50ca7870fab1f",-        "checked": "2026-11-12",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -229,13 +229,13 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "0fe54d35cbf70e0014ab89bc885cca75b003f82a11d7fecb01a2e834454cda1c",-        "checked": "2026-11-12",+        "sha256": "29e8ef11c4e66d38a989fa81e10dd3bd5964ced0c7b61462b3e3288102d2395b",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "SO",+      "package_code": "SO (SOIC-18, Wide 7.50 mm body)",       "source_page": 297,       "D": {         "nom_mm": 11.55,@@ -356,10 +356,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pic18f1330-i-so-hero.glb",-    "pic18f1330-i-so-hero.overlay.json",-    "pic18f1330-i-so-etched.glb"+    "pic18f1330-i-so-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-18-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
pic18f1330-i-so-hero.overlay.json+483−478
@@ -1,480 +1,485 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "PIC18F1330-I/SO",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 18,-      "span_mm": 11.35,-      "dash_mm": 0.2838,-      "gap_mm": 0.1703,-      "pad_stroke_mm": 0.0681-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 18,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }-  },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.908,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -5.15,-      5.15,-      -5.285,-      5.285-    ],-    "pads_bbox_mm": [-      -5.675,-      5.675,-      -5.38,-      5.38-    ],-    "seating_z_mm": 0.0-  },-  "sources": {-    "glb": "pic18f1330-i-so-etched.glb",-    "glb_sha256": "d3025d358ceed2277e6d898ad19fec31e757279bafef147135f7d95c663f0369",-    "footprint": "pic18f1330-i-so.kicad_mod",-    "footprint_sha256": "7eec490ec4feabbe30fa197f0f395da5eeabbd36efadacce0a3f05290c8be447",-    "pins": "page.json component.pins",-    "pins_sha256": "0d70f037827597bfc0db1d224270487fd88cb1d19e26fbca7a270794116c24f0"-  },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "RA0/AN0/INT0/KBI0/CMP0",-      "x": -5.825,-      "y": -5.08,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "RA1/AN1/INT1/KBI1",-      "x": -5.825,-      "y": -3.81,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "RA4/T0CKI/AN2/VREF+",-      "x": -5.825,-      "y": -2.54,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "4",-      "text": "MCLR/VPP/RA5/FLTA",-      "x": -5.825,-      "y": -1.27,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "5",-      "text": "VSS",-      "x": -5.825,-      "y": 0.0,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "6",-      "text": "RA2/TX/CK",-      "x": -5.825,-      "y": 1.27,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "7",-      "text": "RA3/RX/DT",-      "x": -5.825,-      "y": 2.54,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "8",-      "text": "RB0/PWM0",-      "x": -5.825,-      "y": 3.81,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "9",-      "text": "RB1/PWM1",-      "x": -5.825,-      "y": 5.08,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "10",-      "text": "RB4/PWM2",-      "x": 5.825,-      "y": 5.08,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "11",-      "text": "RB5/PWM3",-      "x": 5.825,-      "y": 3.81,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "12",-      "text": "RB6/PWM4/PGC",-      "x": 5.825,-      "y": 2.54,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "13",-      "text": "RB7/PWM5/PGD",-      "x": 5.825,-      "y": 1.27,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "14",-      "text": "VDD",-      "x": 5.825,-      "y": 0.0,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "15",-      "text": "RA6/OSC2/CLKO/T1OSO/T1CKI/AN3",-      "x": 5.825,-      "y": -1.27,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "16",-      "text": "RA7/OSC1/CLKI/T1OSI/FLTA",-      "x": 5.825,-      "y": -2.54,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "17",-      "text": "RB2/INT2/KBI2/CMP2/T1OSO/T1CKI",-      "x": 5.825,-      "y": -3.81,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "18",-      "text": "RB3/INT3/KBI3/CMP1/T1OSI",-      "x": 5.825,-      "y": -5.08,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+ "spec": "adom-hero 1.4",+ "mpn": "PIC18F1330-I",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 18,+   "span_mm": 11.35,+   "dash_mm": 0.2838,+   "gap_mm": 0.1703,+   "pad_stroke_mm": 0.0681+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 18,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.908,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -5.15,+   5.15,+   -5.285,+   5.285+  ],+  "pads_bbox_mm": [+   -5.675,+   5.675,+   -5.38,+   5.38   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -5.08-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -3.81-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -2.54-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -1.27-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        0.0-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        1.27-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        2.54-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        3.81-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        5.08-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        5.08-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        3.81-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        2.54-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        1.27-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        0.0-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "15",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -1.27-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "16",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -2.54-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "17",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -3.81-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "18",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -5.08-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "pic18f1330-i-so-etched.glb",+  "glb_sha256": "d3025d358ceed2277e6d898ad19fec31e757279bafef147135f7d95c663f0369",+  "footprint": "pic18f1330-i-so.kicad_mod",+  "footprint_sha256": "7eec490ec4feabbe30fa197f0f395da5eeabbd36efadacce0a3f05290c8be447",+  "pins": "page.json component.pins",+  "pins_sha256": "0d70f037827597bfc0db1d224270487fd88cb1d19e26fbca7a270794116c24f0"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "RA0/AN0/INT0/KBI0/CMP0",+   "x": -5.825,+   "y": -5.08,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "RA1/AN1/INT1/KBI1",+   "x": -5.825,+   "y": -3.81,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "RA4/T0CKI/AN2/VREF+",+   "x": -5.825,+   "y": -2.54,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "MCLR/VPP/RA5/FLTA",+   "x": -5.825,+   "y": -1.27,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "VSS",+   "x": -5.825,+   "y": 0.0,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "RA2/TX/CK",+   "x": -5.825,+   "y": 1.27,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "7",+   "text": "RA3/RX/DT",+   "x": -5.825,+   "y": 2.54,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "8",+   "text": "RB0/PWM0",+   "x": -5.825,+   "y": 3.81,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "9",+   "text": "RB1/PWM1",+   "x": -5.825,+   "y": 5.08,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "10",+   "text": "RB4/PWM2",+   "x": 5.825,+   "y": 5.08,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "11",+   "text": "RB5/PWM3",+   "x": 5.825,+   "y": 3.81,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "12",+   "text": "RB6/PWM4/PGC",+   "x": 5.825,+   "y": 2.54,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "13",+   "text": "RB7/PWM5/PGD",+   "x": 5.825,+   "y": 1.27,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "14",+   "text": "VDD",+   "x": 5.825,+   "y": 0.0,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "15",+   "text": "RA6/OSC2/CLKO/T1OSO/T1CKI/AN3",+   "x": 5.825,+   "y": -1.27,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "16",+   "text": "RA7/OSC1/CLKI/T1OSI/FLTA",+   "x": 5.825,+   "y": -2.54,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "17",+   "text": "RB2/INT2/KBI2/CMP2/T1OSO/T1CKI",+   "x": 5.825,+   "y": -3.81,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "18",+   "text": "RB3/INT3/KBI3/CMP1/T1OSI",+   "x": 5.825,+   "y": -5.08,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -5.08+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -3.81+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -2.54+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -1.27+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    0.0+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    1.27+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    2.54+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    3.81+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    5.08+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    5.08+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    3.81+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    2.54+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    1.27+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    0.0+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "15",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -1.27+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "16",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -2.54+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "17",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -3.81+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "18",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -5.08+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
pic18f1330-i-so.lbr+14−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-18-300mil. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SOIC-18W_7.5x11.6mm_P1.27mm">   <description>SOIC-18W, 7.5 x 11.6 mm, 1.27 mm pitch. SOIC, 18 Pin</description>@@ -96,6 +96,7 @@ </packages> <symbols> <symbol name="PIC18F1330-I">+  <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-18-300mil. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-30.48" y1="12.7" x2="30.48" y2="12.7" width="0.254" layer="94"/>   <wire x1="30.48" y1="12.7" x2="30.48" y2="-12.7" width="0.254" layer="94"/>   <wire x1="30.48" y1="-12.7" x2="-30.48" y2="-12.7" width="0.254" layer="94"/>@@ -124,7 +125,7 @@ </symbols> <devicesets> <deviceset name="PIC18F1330-I" prefix="U">-  <description></description>+  <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-18-300mil. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="PIC18F1330-I" x="0" y="0"/>   </gates>@@ -150,7 +151,17 @@         <connect gate="G$1" pin="RB5/PWM3" pad="11"/>         <connect gate="G$1" pin="RB4/PWM2" pad="10"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="PIC18F1330-I/SO" constant="no"/>+          <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>+          <attribute name="DATASHEET" value="https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/39758D.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/pic18f1330-i-so" constant="no"/>+          <attribute name="MOUSER_PN" value="579-PIC18F1330-I/SO" constant="no"/>+          <attribute name="DIGIKEY_PN" value="PIC18F1330-I/SO-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C642758" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>