3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18F1320T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-18-300mil
PIC18F1320T-I from Microchip Tech, in a SOIC-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA0/AN0 | bidirectional | PORTA bit 0 digital I/O (ST buffer) or analog input 0. |
| 2 | RA1/AN1/LVDIN | bidirectional | PORTA bit 1 digital I/O (ST buffer), analog input 1, or Low-Voltage Detect input. |
| 3 | RA4/T0CKI | bidirectional | PORTA bit 4 digital I/O (ST, open-drain when configured as output) or Timer0 external clock input. |
| 4 | MCLR/VPP/RA5 | input | Active-low Master Clear (Reset) input, programming voltage input (VPP), or digital input RA5 when MCLR is disabled. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RA2/AN2/VREF- | bidirectional | PORTA bit 2 digital I/O (ST buffer), analog input 2, or A/D reference voltage (low) input. |
| 7 | RA3/AN3/VREF+ | bidirectional | PORTA bit 3 digital I/O (ST buffer), analog input 3, or A/D reference voltage (high) input. |
| 8 | RB0/AN4/INT0 | bidirectional | PORTB bit 0 digital I/O (TTL buffer, optional weak pull-up), analog input 4, or external interrupt 0. |
| 9 | RB1/AN5/TX/CK/INT1 | bidirectional | PORTB bit 1 digital I/O (TTL), analog input 5, EUSART asynchronous transmit, EUSART synchronous clock, or external interrupt 1. |
| 10 | RB4/AN6/RX/DT/KBI0 | bidirectional | PORTB bit 4 digital I/O (TTL), analog input 6, EUSART asynchronous receive, EUSART synchronous data, or interrupt-on-change pin. |
| 11 | RB5/PGM/KBI1 | bidirectional | PORTB bit 5 digital I/O (TTL), Low-Voltage ICSP programming enable pin, or interrupt-on-change pin. |
| 12 | RB6/PGC/T1OSO/T13CKI/P1C/KBI2 | bidirectional | PORTB bit 6 digital I/O, In-Circuit Debugger and ICSP programming clock, Timer1 oscillator output, Timer1/Timer3 external clock, Enhanced PWM output P1C, or interrupt-on-change pin. |
| 13 | RB7/PGD/T1OSI/P1D/KBI3 | bidirectional | PORTB bit 7 digital I/O, In-Circuit Debugger and ICSP programming data, Timer1 oscillator input, Enhanced PWM output P1D, or interrupt-on-change pin. |
| 14 | VDD | power_in | Positive supply for logic and I/O pins (device operating range 2.0V to 5.5V). |
| 15 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output, CLKO (1/4 OSC1 frequency) in RC, EC and INTRC modes, or general purpose I/O RA6. |
| 16 | OSC1/CLKI/RA7 | bidirectional | Oscillator crystal or external clock input (ST in RC mode, CMOS otherwise), or general purpose I/O RA7. |
| 17 | RB2/P1B/INT2 | bidirectional | PORTB bit 2 digital I/O (TTL), Enhanced CCP1/PWM output P1B, or external interrupt 2. |
| 18 | RB3/CCP1/P1A | bidirectional | PORTB bit 3 digital I/O (TTL), Capture 1 input/Compare 1 output/PWM 1 output, or Enhanced CCP1/PWM output P1A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-18-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 4.2 | 5.5 | V | PIC18F1220/1320, HS, XT, RC and LP Oscillator mode | 233 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | 233 | |||
| VDD Start Voltage for POR | VPOR | 0.7 | V | See Section 4.1 | 233 | ||
| VDD Rise Rate for POR | SVDD | 0.05 | V/ms | See Section 4.1 | 233 | ||
| Brown-out Reset Voltage BORV=01 | VBOR | 3.88 | 4.22 | 4.56 | V | PIC18F1220/1320 Industrial (-10C to +85C), BORV1:BORV0 = 01 | 233 |
| Brown-out Reset Voltage BORV=00 | VBOR | 4.18 | 4.54 | 4.9 | V | PIC18F1220/1320 Industrial (-10C to +85C), BORV1:BORV0 = 00 | 233 |
| Brown-out Reset Voltage BORV=00 (cold) | VBOR | 3.9 | 4.54 | 5.18 | V | PIC18F1220/1320 Industrial (-40C to -10C), BORV1:BORV0 = 00 | 233 |
| Power-Down Current | IPD | 0.1 | 2 | µA | All devices, VDD = 5.0V, Sleep mode, -40°C | 234 | |
| Power-Down Current | IPD | 0.4 | 6.5 | µA | All devices, VDD = 5.0V, Sleep mode, +85°C | 234 | |
| Supply Current | IDD | 55 | 80 | µA | All devices, FOSC = 31 kHz, RC_RUN, VDD = 5.0V, +25°C | 234 | |
| Supply Current | IDD | 390 | 550 | µA | All devices, FOSC = 1 MHz, RC_RUN, VDD = 5.0V, +25°C | 235 | |
| Supply Current | IDD | 1.2 | 1.8 | mA | All devices, FOSC = 4 MHz, RC_RUN, VDD = 5.0V, +25°C | 235 | |
| Supply Current | IDD | 14 | 16 | µA | All devices, FOSC = 31 kHz, RC_IDLE, VDD = 5.0V, +25°C | 236 | |
| Supply Current | IDD | 195 | 380 | µA | All devices, FOSC = 1 MHz, RC_IDLE, VDD = 5.0V, +25°C | 236 | |
| Supply Current | IDD | 400 | 800 | µA | All devices, FOSC = 4 MHz, RC_IDLE, VDD = 5.0V, +25°C | 237 | |
| Supply Current | IDD | 0.63 | 1 | mA | All devices, FOSC = 1 MHz, PRI_RUN EC, VDD = 5.0V, +25°C | 237 | |
| Supply Current | IDD | 1.6 | 2 | mA | All devices, FOSC = 4 MHz, PRI_RUN EC, VDD = 5.0V, +25°C | 238 | |
| Supply Current | IDD | 9.5 | 12 | mA | All devices, FOSC = 40 MHz, PRI_RUN EC, VDD = 4.2V, +25°C | 238 | |
| Supply Current | IDD | 12.1 | 15 | mA | All devices, FOSC = 40 MHz, PRI_RUN EC, VDD = 5.0V, +25°C | 238 | |
| Operating temperature (industrial) | TA | -40 | 85 | °C | Industrial | 233 | |
| Ambient temperature under bias | -40 | 125 | °C | 230 | |||
| Storage temperature | -65 | 150 | °C | 230 | |||
| Voltage on VDD w.r.t. VSS | VDD | -0.3 | 5.5 | V | 230 | ||
| Voltage on MCLR w.r.t. VSS | 0 | 13.25 | V | Note 2 | 230 | ||
| Voltage on RA4 w.r.t. VSS | 0 | 8.5 | V | 230 | |||
| Total power dissipation | 1 | W | Note 1 | 230 | |||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 230 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 230 |
CAD (KiCad official)
- Symbol:
PIC18F1320T-I - Footprint:
Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm - 3D model: SOIC-18-300mil (KiCad packages3D, STEP)
- 3D model files:
pic18f1320t-i-etched.step/pic18f1320t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f1320t-i.step/pic18f1320t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (296 pp, sha256
0adbd66402bd530a, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).