main
Ray Publish 0.1.0 e76fe51

PIC16LF84A-04I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-18-300mil

PIC16LF84A-04I from Microchip Tech, in a SOIC-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA2 bidirectional PORTA bidirectional I/O pin with TTL input buffer.
2 RA3 bidirectional PORTA bidirectional I/O pin with TTL input buffer.
3 RA4/T0CKI bidirectional PORTA bidirectional I/O with Schmitt Trigger input and open-drain output; can also be selected as the clock input to the TMR0 timer/counter.
4 MCLR input Master Clear (active low Reset) input and programming voltage input, Schmitt Trigger input.
5 VSS power_in Ground reference for logic and I/O pins.
6 RB0/INT bidirectional PORTB bidirectional I/O with TTL input (Schmitt Trigger when used as external interrupt); can be selected as the external interrupt pin.
7 RB1 bidirectional PORTB bidirectional I/O pin with TTL input buffer and software-programmable weak pull-up.
8 RB2 bidirectional PORTB bidirectional I/O pin with TTL input buffer and software-programmable weak pull-up.
9 RB3 bidirectional PORTB bidirectional I/O pin with TTL input buffer and software-programmable weak pull-up.
10 RB4 bidirectional PORTB bidirectional I/O pin with TTL input and interrupt-on-change.
11 RB5 bidirectional PORTB bidirectional I/O pin with TTL input and interrupt-on-change.
12 RB6 bidirectional PORTB bidirectional I/O pin with interrupt-on-change; serial programming clock (Schmitt Trigger input in serial programming mode).
13 RB7 bidirectional PORTB bidirectional I/O pin with interrupt-on-change; serial programming data (Schmitt Trigger input in serial programming mode).
14 VDD power_in Positive supply for logic and I/O pins.
15 OSC2/CLKOUT output Oscillator crystal output; connects to crystal or resonator in crystal mode, in RC mode outputs CLKOUT at 1/4 the OSC1 frequency denoting the instruction cycle rate.
16 OSC1/CLKIN input Oscillator crystal input / external clock source input (Schmitt Trigger in RC mode, CMOS otherwise).
17 RA0 bidirectional PORTA bidirectional I/O pin with TTL input buffer.
18 RA1 bidirectional PORTA bidirectional I/O pin with TTL input buffer.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-18-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 18

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (16LF84A) VDD 2 5.5 V XT, RC, and LP osc configuration 49
Operating temperature (industrial) TA -40 85 °C industrial 49
RAM data retention voltage VDR 1.5 V Device in SLEEP mode 49
VDD rise rate for POR SVDD 0.05 V/ms 49
Supply current (16LF84A) IDD 1 4 mA RC and XT osc configuration (Note 4), FOSC = 2.0 MHz, VDD = 5.5V 49
Supply current LP mode (16LF84A) IDD 15 45 µA LP osc configuration, FOSC = 32 kHz, VDD = 2.0V, WDT disabled 49
Power-down current (16LF84A) IPD 0.4 1 µA VDD = 2.0V, WDT disabled, industrial 50
Input low voltage, I/O TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V (Note 4) 51
Input high voltage, I/O TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V (Note 4) 51
Hysteresis of Schmitt Trigger inputs VHYS 0.1 V 51
PORTB weak pull-up current IPURB 50 250 400 µA VDD = 5.0V, VPIN = VSS 51
Input leakage current, I/O ports IIL 1 µA Vss ≤ VPIN ≤ VDD, Pin at hi-impedance 51
Input leakage current, MCLR, RA4/T0CKI IIL 5 µA Vss ≤ VPIN ≤ VDD 51
Input leakage current, OSC1 IIL 5 µA Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration 51
Output low voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V 52
Output low voltage, OSC2/CLKOUT VOL 0.6 V IOL = 1.6 mA, VDD = 4.5V, (RC mode only) 52
Open drain high voltage, RA4 VOD 8.5 V 52
Load capacitance OSC2 COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 52
Load capacitance, all I/O pins and OSC2 (RC mode) CIO 50 pF 52
Data EEPROM erase/write cycle time TDEW 4 8 ms 52
VDD for FLASH erase/write VPEW 4.5 5.5 V 52
FLASH erase/write cycle time TPEW 4 8 ms 52
Ambient temperature under bias -55 125 °C 47
Storage temperature -65 150 °C 47
Voltage on VDD with respect to VSS VDD -0.3 7.5 V 47
Voltage on MCLR with respect to VSS -0.3 14 V Note 1 47
Voltage on RA4 with respect to VSS -0.3 8.5 V 47
Maximum current out of VSS pin 150 mA 47
Maximum current into VDD pin 100 mA 47
Maximum current sunk by PORTA 80 mA 47
Maximum current sourced by PORTA 50 mA 47
Maximum current sunk by PORTB 150 mA 47
Maximum current sourced by PORTB 100 mA 47
External CLKIN frequency, XT/RC (-04, LF) FOSC 2 MHz XT, RC osc (-04, LF) 55
External CLKIN frequency, LP (-04, LF) FOSC 200 kHz LP osc (-04, LF) 55
External CLKIN period, XT/RC (-04, LF) TOSC 500 ns XT, RC osc (-04, LF) 55
Clock in (OSC1) high or low time, XT (-04, LF) TosL, TosH 60 ns XT osc (-04, LF) 55
OSC1 to CLKOUT, extended (LF) TosH2ckL 15 120 ns (Note 1) 56
Port output rise time, extended (LF) TioR 10 70 ns 56
Port output fall time, extended (LF) TioF 10 70 ns 56
INT pin high or low time, extended (LF) TINP 55 ns 56

CAD (KiCad official)

  • Symbol: PIC16LF84A-04I
  • Footprint: Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm
  • 3D model: SOIC-18-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16lf84a-04i-etched.step / pic16lf84a-04i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16lf84a-04i.step / pic16lf84a-04i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (90 pp, sha256 33e026b441bd51c2, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF