main
Ray
Publish 0.1.0
a5be2c1
PIC16LF722-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC16LF722-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | Input-only RE3 digital input, or master clear (MCLR) reset input with internal pull-up, or high-voltage programming voltage (VPP) input. |
| 2 | RA0/AN0/SS | bidirectional | General purpose I/O, A/D channel 0 input, or SSP slave select input (SS can be moved to RA0 via APFCON; VCAP function is not present on LF devices). |
| 3 | RA1/AN1 | bidirectional | General purpose I/O or A/D channel 1 input. |
| 4 | RA2/AN2 | bidirectional | General purpose I/O or A/D channel 2 input. |
| 5 | RA3/AN3/VREF | bidirectional | General purpose I/O, A/D channel 3 input, or A/D voltage reference input. |
| 6 | RA4/CPS6/T0CKI | bidirectional | General purpose I/O, capacitive sensing input 6, or Timer0 clock input. |
| 7 | RA5/AN4/CPS7/SS | bidirectional | General purpose I/O, A/D channel 4 input, capacitive sensing input 7, or SSP slave select input (VCAP function is not present on LF devices). |
| 8 | VSS | power_in | Ground reference. |
| 9 | RA7/OSC1/CLKIN | bidirectional | General purpose I/O, crystal/resonator connection (LP, XT, HS modes), external clock input (EC mode) or RC oscillator connection (RC mode). |
| 10 | RA6/OSC2/CLKOUT | bidirectional | General purpose I/O, crystal/resonator connection (LP, XT, HS modes), or FOSC/4 clock output (VCAP function is not present on LF devices). |
| 11 | RC0/T1OSO/T1CKI | bidirectional | General purpose I/O, Timer1 oscillator connection, or Timer1 clock input. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | General purpose I/O, Timer1 oscillator connection, or Capture/Compare/PWM2 (CCP2 can alternatively be placed on RB3). |
| 13 | RC2/CCP1 | bidirectional | General purpose I/O or Capture/Compare/PWM1. |
| 14 | RC3/SCK/SCL | bidirectional | General purpose I/O, SPI clock, or I2C clock. |
| 15 | RC4/SDI/SDA | bidirectional | General purpose I/O, SPI data input, or I2C data input/output. |
| 16 | RC5/SDO | bidirectional | General purpose I/O or SPI data output. |
| 17 | RC6/TX/CK | bidirectional | General purpose I/O, USART asynchronous transmit, or USART synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | General purpose I/O, USART asynchronous receive input, or USART synchronous data. |
| 19 | VSS | power_in | Ground reference. |
| 20 | VDD | power_in | Positive supply; 1.8V-3.6V operation for PIC16LF722. |
| 21 | RB0/AN12/CPS0/INT | bidirectional | General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 12 input, capacitive sensing input 0, or external interrupt. |
| 22 | RB1/AN10/CPS1 | bidirectional | General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 10 input, or capacitive sensing input 1. |
| 23 | RB2/AN8/CPS2 | bidirectional | General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 8 input, or capacitive sensing input 2. |
| 24 | RB3/AN9/CPS3/CCP2 | bidirectional | General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 9 input, capacitive sensing input 3, or Capture/Compare/PWM2 (alternate CCP2 location). |
| 25 | RB4/AN11/CPS4 | bidirectional | General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 11 input, or capacitive sensing input 4. |
| 26 | RB5/AN13/CPS5/T1G | bidirectional | General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 13 input, capacitive sensing input 5, or Timer1 gate input. |
| 27 | RB6/ICSPCLK | bidirectional | General purpose I/O with interrupt-on-change and individually enabled pull-up, serial programming clock (ICSPCLK) or in-circuit debug clock. |
| 28 | RB7/ICSPDAT | bidirectional | General purpose I/O with interrupt-on-change and individually enabled pull-up, ICSP data I/O or in-circuit debug data I/O. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VDD with respect to VSS, PIC16LF72X | -0.3 | 4 | V | 200 | |||
| Voltage on MCLR with respect to Vss | -0.3 | 9 | V | 200 | |||
| Maximum current out of VSS pin | 95 | mA | 200 | ||||
| Maximum current into VDD pin | 70 | mA | 200 | ||||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 200 | ||
| Maximum output current sunk by any I/O pin | 25 | mA | 200 | ||||
| Maximum output current sourced by any I/O pin | 25 | mA | 200 | ||||
| Maximum current sunk by all ports | 200 | mA | -40°C TA +85°C for industrial | 200 | |||
| Maximum current sourced by all ports | 140 | mA | -40°C TA +85°C for industrial | 200 | |||
| Maximum current sourced by all ports | 65 | mA | -40°C TA +125°C for extended | 200 | |||
| Ambient temperature under bias | -40 | 125 | °C | 200 | |||
| Storage temperature | -65 | 150 | °C | 200 | |||
| Supply Voltage PIC16LF722/3/4/6/7 | VDD | 1.8 | 3.6 | V | FOSC <= 16 MHz: HFINTOSC, EC | 201 | |
| Supply Voltage PIC16LF722/3/4/6/7 | VDD | 2.3 | 3.6 | V | FOSC <= 20 MHz, EC | 201 | |
| Supply Voltage PIC16LF722/3/4/6/7 | VDD | 2.5 | 3.6 | V | FOSC <= 20 MHz, HS | 201 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | Device in Sleep mode | 201 | ||
| Fixed Voltage Reference initial accuracy | VFVR | -8 | 6 | % | VFVR = 1.024V, VDD 2.5V | 201 | |
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See Section 3.2 Power-on Reset (POR) for details. | 201 | ||
| LDO Regulator | IDD | 110 | 150 | µA | FOSC = 1 MHz (1.8V) | 203 | |
| XT Oscillator mode | IDD | 150 | 215 | µA | FOSC = 1 MHz, XT Oscillator mode, 3.0V | 203 | |
| XT Oscillator mode | IDD | 230 | 300 | µA | FOSC = 4 MHz (1.8V) | 203 | |
| MFINTOSC mode | IDD | 100 | 130 | µA | FOSC = 500 kHz (1.8V) | 204 | |
| MFINTOSC mode | IDD | 120 | 150 | µA | FOSC = 500 kHz, MFINTOSC mode, 3.0V | 204 | |
| HFINTOSC mode | IDD | 650 | 800 | µA | FOSC = 8 MHz (1.8V) | 204 | |
| HFINTOSC mode | IDD | 1000 | 1200 | µA | FOSC = 8 MHz, HFINTOSC mode, 3.0V | 204 | |
| HFINTOSC mode | IDD | 1 | 1.2 | mA | FOSC = 16 MHz (1.8V) | 204 | |
| HFINTOSC mode | IDD | 1.5 | 1.85 | mA | FOSC = 16 MHz, HFINTOSC mode, 3.0V | 204 | |
| EXTRC mode | IDD | 210 | 240 | µA | FOSC = 4 MHz (1.8V), Note 3, Note 5 | 204 | |
| EXTRC mode | IDD | 340 | 380 | µA | FOSC = 4 MHz, EXTRC mode, 3.0V | 204 | |
| HS Oscillator mode | IDD | 1.6 | 1.9 | mA | FOSC = 20 MHz, 3.0V | 204 | |
| HS Oscillator mode | IDD | 2 | 2.8 | mA | FOSC = 20 MHz, HS Oscillator mode, 3.6V | 204 | |
| Power-down Base Current | IPD | 0.02 | 0.7 | µA | WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive, 1.8V, Max. +85°C column | 205 | |
| Power-down Base Current | IPD | 0.02 | 3.9 | µA | WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive, 1.8V, Max. +125°C column | 205 | |
| Power-down Base Current | IPD | 0.08 | 1 | µA | WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive, 3.0V, Max. +85°C column | 205 | |
| Power-down Base Current | IPD | 0.08 | 4.3 | µA | WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive, 3.0V, Max. +125°C column | 205 | |
| Input Leakage Current I/O ports | IIL | -5 | 5 | nA | VSS VPIN VDD, Pin at high-impedance, 85°C | 207 | |
| Input Leakage Current I/O ports | IIL | -125 | 125 | nA | VSS VPIN VDD, Pin at high-impedance, 125°C | 207 | |
| PORTB Weak Pull-up Current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 207 |
| Output Low Voltage I/O ports | VOL | 0.6 | V | IOL = 6mA, VDD = 3.3V | 207 | ||
| Capacitive Loading OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 207 | ||
| Capacitive Loading All I/O pins | CIO | 50 | pF | 207 | |||
| Characteristic Retention | TRETD | 40 | Year | Provided no other specifications are violated | 208 | ||
| VDD for Write or Row Erase | VPEW | 2.7 | V | VMIN = Minimum operating voltage, VMAX = Maximum operating voltage | 208 | ||
| External CLKIN Frequency LP Oscillator mode | FOSC | 37 | kHz | LP Oscillator mode | 213 | ||
| External CLKIN Frequency XT Oscillator mode | FOSC | 4 | MHz | XT Oscillator mode | 213 | ||
| External CLKIN Frequency HS Oscillator mode | FOSC | 20 | MHz | HS Oscillator mode | 213 | ||
| External CLKIN Frequency EC Oscillator mode | FOSC | 20 | MHz | EC Oscillator mode | 213 | ||
| Internal Calibrated HFINTOSC Frequency tolerance | HFOSC | -2 | 2 | % | 0°C TA +85°C, VDD | 214 | |
| Internal Calibrated HFINTOSC Frequency tolerance | HFOSC | -5 | 5 | % | -40°C TA +125°C | 214 | |
| HFINTOSC Wake-up from Sleep Start-up Time | TIOSC ST | 5 | 8 | µs | 214 | ||
| MCLR Pulse Width (low) | TMCL | 2 | µs | VDD = 3.3-5V, -40°C to +85°C | 217 | ||
| Low Power Watchdog Timer Time-out Period (No Prescaler) | TWDTLP | 10 | 18 | 27 | ms | VDD = 3.3V-5V | 217 |
| Power-up Timer Period, PWRTE = 0 | TPWRT | 40 | 65 | 140 | ms | PWRTE = 0 | 217 |
| I/O high-impedance from MCLR Low or Watchdog Timer Reset | TIOZ | 2 | µs | 217 | |||
| Brown-out Reset Voltage | VBOR | 2.38 | 2.5 | 2.73 | V | BORV=2.5V | 217 |
| Brown-out Reset Voltage | VBOR | 1.8 | 1.9 | 2.11 | V | BORV=1.9V | 217 |
| Brown-out Reset Hysteresis | VHYST | 0 | 25 | 50 | mV | -40°C to +85°C | 217 |
| Integral Error | EIL | -1.7 | 1.7 | LSb | VREF = 3.0V | 219 | |
| Differential Error | EDL | -1 | 1 | LSb | No missing codes, VREF = 3.0V | 219 | |
| Offset Error | EOFF | -2.2 | 2.2 | LSb | VREF = 3.0V | 219 | |
| Gain Error | EGN | -1.5 | 1.5 | LSb | VREF = 3.0V | 219 | |
| Reference Voltage | VREF | 1.8 | V | 219 | |||
| Recommended Impedance of Analog Voltage Source | ZAIN | 50 | k | Can go higher if external 0.01F capacitor is present on input pin. | 219 | ||
| A/D Clock Period | TAD | 1 | 9 | µs | TOSC-based | 219 | |
| A/D Internal RC Oscillator Period | TAD | 1 | 2 | 6 | µs | ADCS<1:0> = 11 (ADRC mode) | 219 |
| SYNC XMIT Clock high to data-out valid | TCKH2DTV | 100 | ns | 1.8-5.5V | 221 | ||
| SYNC RCV Data-hold before CK (DT hold time) | TDTV2CKL | 10 | ns | 221 | |||
| SYNC RCV Data-hold after CK (DT hold time) | TCKL2DTL | 15 | ns | 221 | |||
| Thermal Resistance Junction to Ambient 28-pin SSOP package | JA | 90 | C/W | 28-pin SSOP package | 209 | ||
| Thermal Resistance Junction to Case 28-pin SSOP package | JC | 24 | C/W | 28-pin SSOP package | 209 |
CAD (KiCad official)
- Symbol:
PIC16LF722-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic16lf722-i-etched.step/pic16lf722-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16lf722-i.step/pic16lf722-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (282 pp, sha256
00bf4f739ca402f9, retrieved 2026-11-09, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC16LF722-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC16LF722-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | Input-only RE3 digital input, or master clear (MCLR) reset input with internal pull-up, or high-voltage programming voltage (VPP) input. |
| 2 | RA0/AN0/SS | bidirectional | General purpose I/O, A/D channel 0 input, or SSP slave select input (SS can be moved to RA0 via APFCON; VCAP function is not present on LF devices). |
| 3 | RA1/AN1 | bidirectional | General purpose I/O or A/D channel 1 input. |
| 4 | RA2/AN2 | bidirectional | General purpose I/O or A/D channel 2 input. |
| 5 | RA3/AN3/VREF | bidirectional | General purpose I/O, A/D channel 3 input, or A/D voltage reference input. |
| 6 | RA4/CPS6/T0CKI | bidirectional | General purpose I/O, capacitive sensing input 6, or Timer0 clock input. |
| 7 | RA5/AN4/CPS7/SS | bidirectional | General purpose I/O, A/D channel 4 input, capacitive sensing input 7, or SSP slave select input (VCAP function is not present on LF devices). |
| 8 | VSS | power_in | Ground reference. |
| 9 | RA7/OSC1/CLKIN | bidirectional | General purpose I/O, crystal/resonator connection (LP, XT, HS modes), external clock input (EC mode) or RC oscillator connection (RC mode). |
| 10 | RA6/OSC2/CLKOUT | bidirectional | General purpose I/O, crystal/resonator connection (LP, XT, HS modes), or FOSC/4 clock output (VCAP function is not present on LF devices). |
| 11 | RC0/T1OSO/T1CKI | bidirectional | General purpose I/O, Timer1 oscillator connection, or Timer1 clock input. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | General purpose I/O, Timer1 oscillator connection, or Capture/Compare/PWM2 (CCP2 can alternatively be placed on RB3). |
| 13 | RC2/CCP1 | bidirectional | General purpose I/O or Capture/Compare/PWM1. |
| 14 | RC3/SCK/SCL | bidirectional | General purpose I/O, SPI clock, or I2C clock. |
| 15 | RC4/SDI/SDA | bidirectional | General purpose I/O, SPI data input, or I2C data input/output. |
| 16 | RC5/SDO | bidirectional | General purpose I/O or SPI data output. |
| 17 | RC6/TX/CK | bidirectional | General purpose I/O, USART asynchronous transmit, or USART synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | General purpose I/O, USART asynchronous receive input, or USART synchronous data. |
| 19 | VSS | power_in | Ground reference. |
| 20 | VDD | power_in | Positive supply; 1.8V-3.6V operation for PIC16LF722. |
| 21 | RB0/AN12/CPS0/INT | bidirectional | General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 12 input, capacitive sensing input 0, or external interrupt. |
| 22 | RB1/AN10/CPS1 | bidirectional | General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 10 input, or capacitive sensing input 1. |
| 23 | RB2/AN8/CPS2 | bidirectional | General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 8 input, or capacitive sensing input 2. |
| 24 | RB3/AN9/CPS3/CCP2 | bidirectional | General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 9 input, capacitive sensing input 3, or Capture/Compare/PWM2 (alternate CCP2 location). |
| 25 | RB4/AN11/CPS4 | bidirectional | General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 11 input, or capacitive sensing input 4. |
| 26 | RB5/AN13/CPS5/T1G | bidirectional | General purpose I/O with interrupt-on-change and individually enabled pull-up, A/D channel 13 input, capacitive sensing input 5, or Timer1 gate input. |
| 27 | RB6/ICSPCLK | bidirectional | General purpose I/O with interrupt-on-change and individually enabled pull-up, serial programming clock (ICSPCLK) or in-circuit debug clock. |
| 28 | RB7/ICSPDAT | bidirectional | General purpose I/O with interrupt-on-change and individually enabled pull-up, ICSP data I/O or in-circuit debug data I/O. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VDD with respect to VSS, PIC16LF72X | | -0.3 | | 4 | V | | 200 |
| Voltage on MCLR with respect to Vss | | -0.3 | | 9 | V | | 200 |
| Maximum current out of VSS pin | | | | 95 | mA | | 200 |
| Maximum current into VDD pin | | | | 70 | mA | | 200 |
| Clamp current | IK | | | 20 | mA | VPIN < 0 or VPIN > VDD | 200 |
| Maximum output current sunk by any I/O pin | | | | 25 | mA | | 200 |
| Maximum output current sourced by any I/O pin | | | | 25 | mA | | 200 |
| Maximum current sunk by all ports | | | | 200 | mA | -40°C TA +85°C for industrial | 200 |
| Maximum current sourced by all ports | | | | 140 | mA | -40°C TA +85°C for industrial | 200 |
| Maximum current sourced by all ports | | | | 65 | mA | -40°C TA +125°C for extended | 200 |
| Ambient temperature under bias | | -40 | | 125 | °C | | 200 |
| Storage temperature | | -65 | | 150 | °C | | 200 |
| Supply Voltage PIC16LF722/3/4/6/7 | VDD | 1.8 | | 3.6 | V | FOSC <= 16 MHz: HFINTOSC, EC | 201 |
| Supply Voltage PIC16LF722/3/4/6/7 | VDD | 2.3 | | 3.6 | V | FOSC <= 20 MHz, EC | 201 |
| Supply Voltage PIC16LF722/3/4/6/7 | VDD | 2.5 | | 3.6 | V | FOSC <= 20 MHz, HS | 201 |
| RAM Data Retention Voltage | VDR | 1.5 | | | V | Device in Sleep mode | 201 |
| Fixed Voltage Reference initial accuracy | VFVR | -8 | | 6 | % | VFVR = 1.024V, VDD 2.5V | 201 |
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | | | V/ms | See Section 3.2 Power-on Reset (POR) for details. | 201 |
| LDO Regulator | IDD | | 110 | 150 | µA | FOSC = 1 MHz (1.8V) | 203 |
| XT Oscillator mode | IDD | | 150 | 215 | µA | FOSC = 1 MHz, XT Oscillator mode, 3.0V | 203 |
| XT Oscillator mode | IDD | | 230 | 300 | µA | FOSC = 4 MHz (1.8V) | 203 |
| MFINTOSC mode | IDD | | 100 | 130 | µA | FOSC = 500 kHz (1.8V) | 204 |
| MFINTOSC mode | IDD | | 120 | 150 | µA | FOSC = 500 kHz, MFINTOSC mode, 3.0V | 204 |
| HFINTOSC mode | IDD | | 650 | 800 | µA | FOSC = 8 MHz (1.8V) | 204 |
| HFINTOSC mode | IDD | | 1000 | 1200 | µA | FOSC = 8 MHz, HFINTOSC mode, 3.0V | 204 |
| HFINTOSC mode | IDD | | 1 | 1.2 | mA | FOSC = 16 MHz (1.8V) | 204 |
| HFINTOSC mode | IDD | | 1.5 | 1.85 | mA | FOSC = 16 MHz, HFINTOSC mode, 3.0V | 204 |
| EXTRC mode | IDD | | 210 | 240 | µA | FOSC = 4 MHz (1.8V), Note 3, Note 5 | 204 |
| EXTRC mode | IDD | | 340 | 380 | µA | FOSC = 4 MHz, EXTRC mode, 3.0V | 204 |
| HS Oscillator mode | IDD | | 1.6 | 1.9 | mA | FOSC = 20 MHz, 3.0V | 204 |
| HS Oscillator mode | IDD | | 2 | 2.8 | mA | FOSC = 20 MHz, HS Oscillator mode, 3.6V | 204 |
| Power-down Base Current | IPD | | 0.02 | 0.7 | µA | WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive, 1.8V, Max. +85°C column | 205 |
| Power-down Base Current | IPD | | 0.02 | 3.9 | µA | WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive, 1.8V, Max. +125°C column | 205 |
| Power-down Base Current | IPD | | 0.08 | 1 | µA | WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive, 3.0V, Max. +85°C column | 205 |
| Power-down Base Current | IPD | | 0.08 | 4.3 | µA | WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive, 3.0V, Max. +125°C column | 205 |
| Input Leakage Current I/O ports | IIL | -5 | | 5 | nA | VSS VPIN VDD, Pin at high-impedance, 85°C | 207 |
| Input Leakage Current I/O ports | IIL | -125 | | 125 | nA | VSS VPIN VDD, Pin at high-impedance, 125°C | 207 |
| PORTB Weak Pull-up Current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 207 |
| Output Low Voltage I/O ports | VOL | | | 0.6 | V | IOL = 6mA, VDD = 3.3V | 207 |
| Capacitive Loading OSC2 pin | COSC2 | | | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 207 |
| Capacitive Loading All I/O pins | CIO | | | 50 | pF | | 207 |
| Characteristic Retention | TRETD | 40 | | | Year | Provided no other specifications are violated | 208 |
| VDD for Write or Row Erase | VPEW | 2.7 | | | V | VMIN = Minimum operating voltage, VMAX = Maximum operating voltage | 208 |
| External CLKIN Frequency LP Oscillator mode | FOSC | | | 37 | kHz | LP Oscillator mode | 213 |
| External CLKIN Frequency XT Oscillator mode | FOSC | | | 4 | MHz | XT Oscillator mode | 213 |
| External CLKIN Frequency HS Oscillator mode | FOSC | | | 20 | MHz | HS Oscillator mode | 213 |
| External CLKIN Frequency EC Oscillator mode | FOSC | | | 20 | MHz | EC Oscillator mode | 213 |
| Internal Calibrated HFINTOSC Frequency tolerance | HFOSC | -2 | | 2 | % | 0°C TA +85°C, VDD | 214 |
| Internal Calibrated HFINTOSC Frequency tolerance | HFOSC | -5 | | 5 | % | -40°C TA +125°C | 214 |
| HFINTOSC Wake-up from Sleep Start-up Time | TIOSC ST | | 5 | 8 | µs | | 214 |
| MCLR Pulse Width (low) | TMCL | 2 | | | µs | VDD = 3.3-5V, -40°C to +85°C | 217 |
| Low Power Watchdog Timer Time-out Period (No Prescaler) | TWDTLP | 10 | 18 | 27 | ms | VDD = 3.3V-5V | 217 |
| Power-up Timer Period, PWRTE = 0 | TPWRT | 40 | 65 | 140 | ms | PWRTE = 0 | 217 |
| I/O high-impedance from MCLR Low or Watchdog Timer Reset | TIOZ | | | 2 | µs | | 217 |
| Brown-out Reset Voltage | VBOR | 2.38 | 2.5 | 2.73 | V | BORV=2.5V | 217 |
| Brown-out Reset Voltage | VBOR | 1.8 | 1.9 | 2.11 | V | BORV=1.9V | 217 |
| Brown-out Reset Hysteresis | VHYST | 0 | 25 | 50 | mV | -40°C to +85°C | 217 |
| Integral Error | EIL | -1.7 | | 1.7 | LSb | VREF = 3.0V | 219 |
| Differential Error | EDL | -1 | | 1 | LSb | No missing codes, VREF = 3.0V | 219 |
| Offset Error | EOFF | -2.2 | | 2.2 | LSb | VREF = 3.0V | 219 |
| Gain Error | EGN | -1.5 | | 1.5 | LSb | VREF = 3.0V | 219 |
| Reference Voltage | VREF | 1.8 | | | V | | 219 |
| Recommended Impedance of Analog Voltage Source | ZAIN | | | 50 | k | Can go higher if external 0.01F capacitor is present on input pin. | 219 |
| A/D Clock Period | TAD | 1 | | 9 | µs | TOSC-based | 219 |
| A/D Internal RC Oscillator Period | TAD | 1 | 2 | 6 | µs | ADCS<1:0> = 11 (ADRC mode) | 219 |
| SYNC XMIT Clock high to data-out valid | TCKH2DTV | | | 100 | ns | 1.8-5.5V | 221 |
| SYNC RCV Data-hold before CK (DT hold time) | TDTV2CKL | 10 | | | ns | | 221 |
| SYNC RCV Data-hold after CK (DT hold time) | TCKL2DTL | 15 | | | ns | | 221 |
| Thermal Resistance Junction to Ambient 28-pin SSOP package | JA | | 90 | | C/W | 28-pin SSOP package | 209 |
| Thermal Resistance Junction to Case 28-pin SSOP package | JC | | 24 | | C/W | 28-pin SSOP package | 209 |
## CAD (KiCad official)
- Symbol: `PIC16LF722-I`
- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`
- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files: `pic16lf722-i-etched.step` / `pic16lf722-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16lf722-i.step` / `pic16lf722-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic16lf722-i-datasheet.pdf) (282 pp, sha256 `00bf4f739ca402f9`, retrieved 2026-11-09, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16lf722-i-datasheet.pdf)