Generated by kicad-footprint-generator · KiCad file format 20260206
PIC16LF627A-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-20-208mil
PIC16LF627A-I from Microchip Tech, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/AN2/VREF | bidirectional | PORTA bit 2 bidirectional I/O (Schmitt Trigger input, CMOS output), also analog comparator input AN2 or VREF output. |
| 2 | RA3/AN3/CMP1 | bidirectional | PORTA bit 3 bidirectional I/O (Schmitt Trigger input, CMOS output), also analog comparator input AN3 or Comparator 1 output CMP1. |
| 3 | RA4/T0CKI/CMP2 | bidirectional | PORTA bit 4 bidirectional I/O (Schmitt Trigger input, open-drain output), also Timer0 clock input T0CKI or open-drain Comparator 2 output CMP2. |
| 4 | RA5/MCLR/VPP | input | Input-only port pin RA5, active-low Master Clear reset when configured as MCLR, or programming voltage input VPP; voltage on MCLR/VPP must not exceed VDD during normal device operation. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | VSS | power_in | Ground reference for logic and I/O pins. |
| 7 | RB0/INT | bidirectional | PORTB bit 0 bidirectional I/O (TTL input, CMOS output) with software-programmable weak pull-up, also external interrupt input INT. |
| 8 | RB1/RX/DT | bidirectional | PORTB bit 1 bidirectional I/O with software-programmable weak pull-up, also USART receive pin RX or synchronous data I/O DT. |
| 9 | RB2/TX/CK | bidirectional | PORTB bit 2 bidirectional I/O with software-programmable weak pull-up, also USART transmit pin TX or synchronous clock I/O CK. |
| 10 | RB3/CCP1 | bidirectional | PORTB bit 3 bidirectional I/O with software-programmable weak pull-up, also Capture/Compare/PWM I/O CCP1. |
| 11 | RB4/PGM | bidirectional | PORTB bit 4 bidirectional I/O with interrupt-on-pin change and programmable weak pull-up, also low-voltage programming input PGM (which disables interrupt-on-change and pull-up when enabled). |
| 12 | RB5 | bidirectional | PORTB bit 5 bidirectional I/O (TTL input, CMOS output) with interrupt-on-pin change and software-programmable weak pull-up. |
| 13 | RB6/T1OSO/T1CKI/PGC | bidirectional | PORTB bit 6 bidirectional I/O with interrupt-on-pin change and weak pull-up, also Timer1 oscillator output T1OSO, Timer1 clock input T1CKI, or ICSP programming clock PGC. |
| 14 | RB7/T1OSI/PGD | bidirectional | PORTB bit 7 bidirectional I/O with interrupt-on-pin change and weak pull-up, also Timer1 oscillator input T1OSI or ICSP data I/O PGD. |
| 15 | VDD | power_in | Positive supply for logic and I/O pins. |
| 16 | VDD | power_in | Positive supply for logic and I/O pins. |
| 17 | RA6/OSC2/CLKOUT | bidirectional | PORTA bit 6 bidirectional I/O, also oscillator crystal/resonator output OSC2, or CLKOUT at 1/4 the OSC1 frequency in RC/INTOSC mode. |
| 18 | RA7/OSC1/CLKIN | bidirectional | PORTA bit 7 bidirectional I/O, also oscillator crystal input OSC1 or external clock source input CLKIN. |
| 19 | RA0/AN0 | bidirectional | PORTA bit 0 bidirectional I/O (Schmitt Trigger input, CMOS output), also analog comparator input AN0. |
| 20 | RA1/AN1 | bidirectional | PORTA bit 1 bidirectional I/O (Schmitt Trigger input, CMOS output), also analog comparator input AN1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-20-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (LF device) | VDD | 2 | 5.5 | V | PIC16LF627A/628A/648A | 137 | |
| VDD Rise Rate to ensure Power-on Reset | SVDD | 0.05 | V/ms | 137 | |||
| Brown-out Reset Voltage | VBOR | 3.65 | 4 | 4.35 | V | BOREN configuration bit is set | 137 |
| Power-down Base Current | IPD | 0.01 | 0.8 | μA | LF, VDD = 2.0V, WDT, BOR, Comparators, VREF and T1OSC disabled | 138 | |
| WDT Current | ΔIWDT | 1 | 2 | μA | LF, VDD = 2.0V | 138 | |
| BOR Current | ΔIBOR | 30 | 55 | μA | VDD = 5.0V | 138 | |
| Comparator Current (both comparators enabled) | ΔICOMP | 15 | 22 | μA | LF, VDD = 2.0V | 138 | |
| VREF Current | ΔIVREF | 34 | 55 | μA | LF, VDD = 2.0V | 138 | |
| T1OSC Current | ΔIT1OSC | 1.2 | 2 | μA | LF, VDD = 2.0V | 138 | |
| Supply Current, LP mode | IDD | 10 | 15 | μA | LF, VDD = 2.0V, FOSC = 32 kHz LP Oscillator Mode | 138 | |
| Supply Current, XT mode 1 MHz | IDD | 125 | 190 | μA | LF, VDD = 2.0V, FOSC = 1 MHz XT Oscillator Mode | 138 | |
| Supply Current, XT mode 4 MHz | IDD | 250 | 350 | μA | LF, VDD = 2.0V, FOSC = 4 MHz XT Oscillator Mode | 138 | |
| Supply Current, INTOSC 4 MHz | IDD | 395 | 465 | μA | LF, VDD = 2.0V, FOSC = 4 MHz INTOSC | 138 | |
| Supply Current, HS mode 20 MHz | IDD | 2.75 | 3.3 | mA | LF/F, VDD = 5.0V, FOSC = 20 MHz HS Oscillator Mode | 138 | |
| Input Low Voltage, I/O ports with TTL buffer | VIL | 0.8 | V | VDD = 4.5V to 5.5V | 140 | ||
| Input High Voltage, I/O ports with TTL buffer | VIH | 2 | V | VDD = 4.5V to 5.5V | 140 | ||
| Input High Voltage, OSC1 (XT and LP) | VIH | 1.3 | V | 140 | |||
| PORTB weak pull-up current | IPURB | 50 | 200 | 400 | μA | VDD = 5.0V, VPIN = VSS | 140 |
| Input Leakage Current, I/O ports (except PORTA) | IIL | -1 | 1 | μA | VSS ≤ VPIN ≤ VDD, pin at high-impedance | 140 | |
| Input Leakage Current, PORTA | IIL | -0.5 | 0.5 | μA | VSS ≤ VPIN ≤ VDD, pin at high-impedance | 140 | |
| Input Leakage Current, RA4/T0CKI | IIL | -1 | 1 | μA | VSS ≤ VPIN ≤ VDD | 140 | |
| Input Leakage Current, OSC1, MCLR | IIL | -5 | 5 | μA | VSS ≤ VPIN ≤ VDD, XT, HS and LP oscillator configuration | 140 | |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5 V, -40° to +85°C | 140 | ||
| Open-Drain High Voltage, RA4 pin | VOD | 8.5 | V | RA4 pin PIC16F627A/628A/648A, PIC16LF627A/628A/648A | 140 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock used to drive OSC1. | 140 | ||
| Capacitive loading, all I/O pins/OSC2 (RC mode) | CIO | 50 | pF | 140 | |||
| Data EEPROM Erase/Write cycle time | TDEW | 4 | 8 | ms | 141 | ||
| Data EEPROM Characteristic Retention | TRETD | 40 | Year | Provided no other specifications are violated | 141 | ||
| Program Flash Write cycle time | TPEW | 2 | 4 | ms | 141 | ||
| Comparator Input Offset Voltage | VIOFF | 5 | 10 | mV | 142 | ||
| Comparator Common Mode Rejection Ratio | CMRR | 55 | db | 142 | |||
| Comparator Response Time | TRESP | 400 | 600 | ns | VDD = 2.0V to 3.0V -40° to +85°C | 142 | |
| Voltage Reference Settling Time | TSET | 10 | μs | 142 | |||
| Oscillator Accuracy | ΔIOSC | 3.8 | 4 | 4.2 | MHz | 2.0V ≤ VDD ≤ 5.5V -40°C ≤ TA ≤ +85°C (IND) | 145 |
| MCLR Pulse Width (low) | TMCL | 2000 | ns | VDD = 5V, -40°C to +85°C | 147 | ||
| Watchdog Timer Time out Period | TWDT | 7 | 18 | 33 | ms | VDD = 5V, -40°C to +85°C | 147 |
| Power-up Timer Period | TPWRT | 28 | 72 | 132 | ms | VDD = 5V, -40°C to +85°C | 147 |
| Brown-out Reset pulse width | TBOR | 100 | μs | VDD ≤ VBOR (D005) | 147 | ||
| Ambient temperature under bias | -40 | 125 | °C | 135 | |||
| Storage temperature | -65 | 150 | °C | 135 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 6.5 | V | 135 | ||
| Voltage on MCLR and RA4 with respect to VSS | -0.3 | 14 | V | 135 | |||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VDD | 135 | |
| Output clamp current | IOK | -20 | 20 | mA | Vo < 0 or Vo > VDD | 135 | |
| Maximum output current sunk by any I/O pin | 25 | mA | 135 | ||||
| Maximum output current sourced by any I/O pin | 25 | mA | 135 | ||||
| Operating temperature (industrial) | TA | -40 | 85 | °C | industrial | 137 |
CAD (KiCad official)
- Symbol:
PIC16LF627A-I - Footprint:
Package_SO:SSOP-20_5.3x7.2mm_P0.65mm - 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
- 3D model files:
pic16lf627a-i-etched.step/pic16lf627a-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16lf627a-i.step/pic16lf627a-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (180 pp, sha256
adb957497df5779f, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).