main
History Download
Ray Publish 0.1.0 1740832

PIC16LF1936-I

Microchip Tech · MICROCHIP · SSOP-28-208mil

PIC16LF1936-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE3/MCLR/VPP input Input-only general purpose pin that is selected as MCLR (Master Clear with internal pull-up, Schmitt Trigger input) or as the VPP high-voltage programming input, depending on the MCLRE and LVP configuration bits.
2 RA0/AN0/C12IN0-/C2OUT/SRNQ/SS/SEG12 bidirectional General purpose I/O that can alternatively serve as ADC channel AN0, comparator C1/C2 negative input, comparator C2 output, SR Latch inverting output, SS slave select input, VCAP regulator filter capacitor (PIC16F1936 only), or LCD SEG12, with pin steering via APFCON.
3 RA1/AN1/C12IN1-/SEG7 bidirectional General purpose I/O that can alternatively serve as ADC channel AN1, comparator C1/C2 negative input, or LCD analog output SEG7.
4 RA2/AN2/C2IN+/VREF-/DACOUT/COM2 bidirectional General purpose I/O that can alternatively serve as ADC channel AN2, ADC negative voltage reference input VREF-, comparator C2 positive input, DAC voltage reference output DACOUT, or LCD analog output COM2.
5 RA3/AN3/C1IN+/VREF+/COM3/SEG15 bidirectional General purpose I/O that can alternatively serve as ADC channel AN3, ADC positive voltage reference input VREF+, comparator C1 positive input, LCD analog output COM3 (PIC16(L)F1936 only), or LCD analog output SEG15, where SEG15 is not available in 1/4 multiplex mode.
6 RA4/C1OUT/CPS6/T0CKI/SRQ/CCP5/SEG4 bidirectional General purpose I/O that can alternatively serve as comparator C1 output, capacitive sensing input CPS6, Timer0 clock input T0CKI (Schmitt Trigger), SR Latch non-inverting output SRQ, CCP5 (28-pin only), or LCD analog output SEG4.
7 RA5/AN4/C2OUT/CPS7/SRNQ/SS/VCAP/SEG5 bidirectional General purpose I/O that can alternatively serve as ADC channel AN4, comparator C2 output, capacitive sensing input CPS7, SR Latch inverting output, SS slave select input, VCAP regulator filter capacitor (PIC16F1936 only), or LCD analog output SEG5.
8 VSS power_in Ground reference for the device.
9 RA7/OSC1/CLKIN/SEG2 bidirectional General purpose I/O that can alternatively serve as oscillator input OSC1 for crystal/resonator modes (LP, XT, HS), external clock input CLKIN in EC mode, or LCD analog output SEG2.
10 RA6/OSC2/CLKOUT/VCAP/SEG1 bidirectional General purpose I/O that can alternatively serve as oscillator output OSC2 for crystal/resonator modes, FOSC/4 clock output CLKOUT, VCAP regulator filter capacitor (PIC16F1936 only), or LCD analog output SEG1.
11 RC0/T1OSO/T1CKI/P2B bidirectional General purpose I/O that can alternatively serve as Timer1 oscillator connection T1OSO, Timer1 clock input T1CKI (Schmitt Trigger), or PWM output P2B.
12 RC1/T1OSI/CCP2/P2A bidirectional General purpose I/O that can alternatively serve as Timer1 oscillator connection T1OSI, Capture/Compare/PWM2 CCP2, or PWM output P2A.
13 RC2/CCP1/P1A/SEG3 bidirectional General purpose I/O that can alternatively serve as Capture/Compare/PWM1 CCP1, PWM output P1A, or LCD analog output SEG3.
14 RC3/SCK/SCL/SEG6 bidirectional General purpose I/O that can alternatively serve as SPI clock SCK, I2C clock SCL (open drain), or LCD analog output SEG6.
15 RC4/SDI/SDA/T1G/SEG11 bidirectional General purpose I/O that can alternatively serve as SPI data input SDI (Schmitt Trigger), I2C data SDA (open drain), Timer1 gate input T1G, or LCD analog output SEG11.
16 RC5/SDO/SEG10 bidirectional General purpose I/O that can alternatively serve as SPI data output SDO (CMOS) or LCD analog output SEG10.
17 RC6/TX/CK/CCP3/P3A/SEG9 bidirectional General purpose I/O that can alternatively serve as EUSART asynchronous transmit TX, EUSART synchronous clock CK, CCP3 and PWM output P3A (28-pin only), or LCD analog output SEG9.
18 RC7/RX/DT/P3B/SEG8 bidirectional General purpose I/O that can alternatively serve as EUSART asynchronous input RX, EUSART synchronous data DT, PWM output P3B, or LCD analog output SEG8.
19 VSS power_in Ground reference for the device.
20 VDD power_in Positive supply for the device.
21 RB0/AN12/CPS0/CCP4/SRI/INT/SEG0 bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up that can alternatively serve as ADC channel AN12, capacitive sensing input CPS0, CCP4 (28-pin only), SR Latch input SRI, external interrupt INT, or LCD analog output SEG0.
22 RB1/AN10/C12IN3-/CPS1/P1C/VLCD1 bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up that can alternatively serve as ADC channel AN10, comparator C1/C2 negative input, capacitive sensing input CPS1, PWM output P1C, or LCD analog input VLCD1.
23 RB2/AN8/CPS2/P1B/VLCD2 bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up that can alternatively serve as ADC channel AN8, capacitive sensing input CPS2, PWM output P1B, or LCD analog input VLCD2.
24 RB3/AN9/C12IN2-/CPS3/CCP2/P2A/VLCD3 bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up that can alternatively serve as ADC channel AN9, comparator C1/C2 negative input, capacitive sensing input CPS3, CCP2, PWM output P2A, or LCD analog input VLCD3.
25 RB4/AN11/CPS4/P1D/COM0 bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up that can alternatively serve as ADC channel AN11, capacitive sensing input CPS4, PWM output P1D, or LCD analog output COM0.
26 RB5/AN13/CPS5/P2B/CCP3/P3A/T1G/COM1 bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up that can alternatively serve as ADC channel AN13, capacitive sensing input CPS5, PWM output P2B, CCP3, PWM output P3A, Timer1 gate input T1G, or LCD analog output COM1.
27 RB6/ICSPCLK/ICDCLK/SEG14 bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up that can alternatively serve as ICSP serial programming clock ICSPCLK (Schmitt Trigger), in-circuit debug clock ICDCLK, or LCD analog output SEG14.
28 RB7/ICSPDAT/ICDDAT/SEG13 bidirectional General purpose I/O with individually controlled interrupt-on-change and individually enabled pull-up that can alternatively serve as ICSP data I/O ICSPDAT, in-circuit debug data I/O ICDDAT, or LCD analog output SEG13.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28-208mil
Category Embedded Processors & Controllers
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (FOSC ≤ 16 MHz) VDD 1.8 3.6 V FOSC ≤ 16 MHz 382
Supply voltage (FOSC ≤ 32 MHz) VDD 2.3 3.6 V FOSC ≤ 32 MHz (Note 2) 382
RAM data retention voltage VDR 1.5 V Device in Sleep mode 382
Fixed voltage reference voltage for ADC VADFVR -8 6 % 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V 382
Fixed voltage reference voltage for comparator and DAC VCDAFVR -11 7 % 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V 382
Fixed voltage reference voltage for LCD bias VLCDFVR -11 10 % 3.072V, VDD ≥ 3.6V 382
VDD rise rate to ensure internal POR signal SVDD 0.05 V/ms See Section 6.1 'Power-on Reset (POR)' for details 382
Voltage on VDD with respect to VSS VDD -0.3 6.5 V Voltage on VDD with respect to VSS 379
Voltage on VDD with respect to VSS (second line, likely LF rating) VDD -0.3 4 V Voltage on VDD with respect to VSS 379
Voltage on VCAP pin with respect to VSS VCAP -0.3 4 V Voltage on VCAP pin with respect to VSS 379
Voltage on MCLR with respect to VSS MCLR -0.3 9 V Voltage on MCLR with respect to Vss 379
Voltage on all other pins with respect to VSS -0.3 V Voltage on all other pins with respect to VSS 379
Maximum current out of VSS pin 255 mA -40°C ≤ TA ≤ +85°C for industrial (28-pin devices) 379
Maximum current into VDD pin 170 mA -40°C ≤ TA ≤ +85°C for industrial (28-pin devices) 379
Maximum output current sunk by any I/O pin 25 mA Maximum output current sunk by any I/O pin 379
Ambient temperature under bias TA -40 125 °C Ambient temperature under bias 379
Operating temperature (industrial) TA -40 85 °C Industrial 382
Input low voltage, I/O port, with SMBus levels VIL 0.8 V with SMBus levels; 2.7V ≤ VDD ≤ 5.5V 389
Input high voltage, I/O port, with SMBus levels VIH 2.1 V with SMBus levels; 2.7V ≤ VDD ≤ 5.5V 389
Output low voltage, I/O ports VOL 0.6 V IOL = 8mA, VDD = 5V; IOL = 6mA, VDD = 3.3V; IOL = 1.8mA, VDD = 1.8V 389
Input leakage current, MCLR IIL -200 50 200 nA VSS ≤ VPIN ≤ VDD @ 85°C 389
Integral error EIL -1.7 1.7 LSb VREF = 3.0V 401
Differential error EDL -1 1 LSb No missing codes; VREF = 3.0V 401
Offset error EOFF -2.5 2.5 LSb VREF = 3.0V 401
Gain error EGN -2 2 LSb VREF = 3.0V 401
ADC reference voltage VREF 1.8 V VREF = (VREF+ minus VREF-) (Note 5) 401
A/D clock period (TOSC-based) TAD 1 9 µs TOSC-based 401
Comparator input offset voltage VIOFF -60 7.5 60 mV High-Power mode 403
Comparator response time rising edge TRESP 400 800 ns High-Power mode 403
Comparator response time falling edge TRESP 200 400 ns High-Power mode 403
Internal calibrated HFINTOSC frequency tolerance HFOSC -2 2 % 0°C ≤ TA ≤ +60°C, VDD ≥ 2.5V 395
Internal calibrated HFINTOSC frequency tolerance HFOSC -3 3 % 60°C ≤ TA ≤ 85°C, VDD ≥ 2.5V 395
Internal calibrated HFINTOSC frequency tolerance HFOSC -5 5 % -40°C ≤ TA ≤ +125°C 395
HFINTOSC wake-up from Sleep start-up time TIOSC ST 3.2 8 µs 395
MFINTOSC wake-up from Sleep start-up time TIOSC ST 24 35 µs 395
Oscillator frequency range (PLL input) F10 4 8 MHz 395
On-chip VCO system frequency (PLL output) F11 16 32 MHz 395
PLL start-up time (lock time) TRC 2 ms 395
MCLR pulse width (low) TMCL 2 µs 399
Low-power watchdog timer time-out period TWDTLP 10 16 27 ms VDD = 3.3V-5V; 1:16 Prescaler used 399
Power-up timer period, PWRTE = 0 TPWRT 40 65 140 ms PWRTE = 0 399
Brown-out reset voltage, BORV = 2.5V VBOR 2.38 2.5 2.73 V BORV = 2.5V 399
Brown-out reset voltage, BORV = 1.9V VBOR 1.8 1.9 2.11 V BORV = 1.9V 399
Brown-out reset DC response time TBORDC 1 3 35 µs VDD ≤ VBOR 399
Self-timed write cycle time (program flash) TIW 2 2.5 ms 391
Supply current, LP oscillator mode, 32 kHz, VDD 1.8V IDD 16 µA FOSC = 32 kHz, LP Oscillator mode (Note 4), -40°C ≤ TA ≤ +85°C; VDD = 1.8V 384
Supply current, LP oscillator mode, 32 kHz, VDD 3.0V IDD 20 µA FOSC = 32 kHz, LP Oscillator mode (Note 4), -40°C ≤ TA ≤ +85°C; VDD = 3.0V 384
Supply current, XT oscillator mode, 4 MHz, VDD 3.0V IDD 750 1000 µA FOSC = 4 MHz, XT Oscillator mode; VDD = 3.0V 384
Supply current, EC low-power mode, 500 kHz, VDD 3.0V IDD 85 150 µA FOSC = 500 kHz, EC Oscillator Low-Power mode; VDD = 3.0V 385
Supply current, HFINTOSC mode, 8 MHz, VDD 1.8V IDD 1 1.4 mA FOSC = 8 MHz, HFINTOSC mode; VDD = 1.8V 386
Supply current, HFINTOSC mode, 8 MHz, VDD 3.0V IDD 1.8 2.3 mA FOSC = 8 MHz, HFINTOSC mode; VDD = 3.0V 386
Supply current, HFINTOSC mode, 16 MHz, VDD 3.0V IDD 2.8 3.7 mA FOSC = 16 MHz, HFINTOSC mode; VDD = 3.0V 386
Power-down base current (IPD), max at +85°C, VDD 1.8V IPD 0.06 1 µA WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive; Max +85°C; VDD = 1.8V 387
Power-down base current (IPD), max at +85°C, VDD 3.0V IPD 0.08 2 µA WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive; Max +85°C; VDD = 3.0V 387
Maximum junction temperature TJMAX 150 °C 392
Thermal resistance junction to ambient, 28-pin SSOP package θJA 90 C/W 28-pin SSOP package 392
Thermal resistance junction to case, 28-pin SSOP package θJC 24 C/W 28-pin SSOP package 392

CAD (KiCad official)

  • Symbol: PIC16LF1936-I
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pic16lf1936-i-etched.step / pic16lf1936-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16lf1936-i.step / pic16lf1936-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (472 pp, sha256 9250c7993972a4aa, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF